Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitive data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Doubling protected land area may be inefficient at preserving the extent of undeveloped land and could cause substantial regional shifts in land use

Abstract Projection of land use and land‐cover change is highly uncertain yet drives critical estimates of carbon emissions, climate change, and food and bioenergy production. We use new, spatially explicit land availability data in conjunction with a model sensitivity analysis to estimate the effects of additional land protection on land use and land cover. The land availability data include protected land and agricultural suitability and is incorporated into the Moirai land data system for initializing the Global Change Analysis Model. Overall, decreasing land availability is relatively inefficient at preserving undeveloped land while having considerable regional land‐use impacts. Current amounts of protected area have little effect on land and crop production estimates, but including the spatial distribution of unsuitable (i.e., unavailable) land dramatically shifts bioenergy production from high northern latitudes to the rest of the world, compared with uniform availability. This highlights the importance of spatial heterogeneity in understanding and managing land change. Approximately doubling the current protected area to emulate a 30% protected area target may avoid land conversion by 2050 of less than half the newly protected extent while reducing bioenergy feedstock land by 10.4% and cropland and grazed pasture by over 3%. Regional bioenergy land may be reduced (increased) by up to 46% (36%), cropland reduced by up to 61%, pasture reduced by up to 100%, and harvested forest reduced by up to 35%. Only a few regions show notable gains in some undeveloped land types of up to 36%. Half of the regions can reach the target using only unsuitable land, which would minimize impacts on agriculture but may not meet conservation goals. Rather than focusing on an area target, a more robust approach may be to carefully select newly protected land to meet well‐defined conservation goals while minimizing impacts to agriculture.

54 ENVIRONMENTAL SCIENCES↗

Dust Optical Properties derived from Sun/Sky Measurements and Satellite Data

We derive the optical properties of dust originating from the Sahara and nearby regions using a combination of ground based and satellite measurements. The AErosol ROBotic NETwork (AERONET) sun/sky radiances from Cap Verde and Sede Boker are used together with Landsat TM data over Senegal and the Atlantic Ocean. The data introduce a cascade of increasing complexity of dust optical properties: The sky aureole radiance is sensitive mainly to the dust size distribution; the TM data over the ocean at 150 deg scattering angle are also sensitive to the spectral refractive index from 470 to 2,210 nm. The TM data over the land measure the balance between the dust scattering and absorption of light reflected by the bright surface, thus very sensitive to dust spectral absorption. Sky radiance at scattering angle of 120 deg, add sensitivity to the dust nonsphericity. Preliminary results, indicative of the ambient dust in the entire atmospheric column, show that dust is less absorbing and with smaller nonspherical properties than anticipated from in situ measurements. Dust is dominated by particles with effective radius of 2 to 2.5 micron, refractive index for wavelengths less then 1 micron of 1.53-0.001i and nonsphericity that increases the phase function at 120 deg above that of spheres by 1.8 and 1.7 at 673 nm down to 1.2 and 1.3 for 1020 nm for Cap Verde and Sede Boker respectively. No significant nonsphericity effect is noticed for scattering angle of 150 deg. This agrees with a mixture of 30% and 45% respectively of Mishchenko et al (JGR, 102, 1997: plate 5 on page 16,841) "polydisperse equiprobable shape mixture of prolate and oblate spheroids with aspect ratios ranging from 1.4 to 2.21, with the rest being spherical particles.

Kaufman, Yoram J.↗

Evaluating the Effects of Detector Modeling Uncertainties on Sterile Neutrino Oscillation Analysis with the ICARUS Detector

he ICARUS T600 LArTPC detector was refurbished after an initial run at the underground LNGS labs and is currently taking data within its experimental hall at Fermilab after full commissioning. Regular data taking began in May 2021 with neutrinos from the Booster Neutrino Beam (BNB) and the Neutrinos at the Main Injector (NuMI) off-axis beam. As the far detector of the Short-Baseline Neutrino (SBN) Program, the ICARUS detector's capability in searching for both muon neutrino disappearance and electron neutrino appearance will allow for unprecedented sensitivity to light sterile neutrinos with eV-scale mass. The ultimate sensitivity of the detector to sterile neutrino oscillations depends on the understanding of the detector response and the uncertainties remaining after calibrating the detector model. This poster will review how detector-model-related uncertainties are quantified, evaluated and their impact on expected sterile neutrino oscillation sensitivities using the existing ICARUS data. The work pursued here is broadly applicable to other ICARUS analysis pathways such as neutrino-argon cross-sections and Beyond the Standard Model physics searches. It will finally discuss improvement pathways to reduce the systematic uncertainties to the level needed for the joint sterile neutrino oscillation analysis with the Short Baseline Near Detector (SBND) within the SBN Program.

43 PARTICLE ACCELERATORS↗

The Orbits of Jupiter’s Irregular Satellites

We report on the improved ephemerides for the irregular Jovian satellites. We used a combination of numerically integrated equations of motion and a weighted least-squares algorithm to fit the astrometric measurements. The orbital fits for 59 satellites are summarized in terms of state vectors, post-fit residuals, and mean orbital elements. The current data set appears to be sensitive to the mass of Himalia, which is constrained to the range of GM = 0.13–0.28 km{sup 3} s{sup −2}. Here, GM is the product of the Newtonian constant of gravitation, G and the body's mass, M . Our analysis of the orbital uncertainties indicates that 11 out of 59 satellites are lost owing to short data arcs. The lost satellites hold provisional International Astronomical Union (IAU) designations and will likely need to be rediscovered.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of a Method for Inverse Heat Conduction Using Real and Simulated Thermocouple Data

It is often impractical to instrument the external surface of high-speed vehicles due to the aerothermodynamic heating. Temperatures can instead be measured internal to the structure using embedded thermocouples, and direct and inverse methods can then be used to estimate temperature and heat flux on the external surface. Two thermocouples embedded at different depths are required to solve direct and inverse problems, and filtering schemes are used to reduce noise in the measured data. Accuracy in the estimated surface temperature and heat flux is dependent on several factors. Factors include the thermocouple location through the thickness of a material, the sensitivity of the surface solution to the error in the specified location of the embedded thermocouples, and the sensitivity to the error in thermocouple data. The effect of these factors on solution accuracy is studied using the methodology discussed in the work of Pizzo, et. al.1 A numerical study is performed to determine if there is an optimal depth at which to embed one thermocouple through the thickness of a material assuming that a second thermocouple is installed on the back face. Solution accuracy will be discussed for a range of embedded thermocouple depths. Moreover, the sensitivity of the surface solution to (a) the error in the specified location of the embedded thermocouple and to (b) the error in the thermocouple data are quantified using numerical simulation, and the results are discussed.

Pizzo, Michelle E.↗

On the Statistical Uncertainty of Monte Carlo-Calculated Scattering Sensitivities

Sensitivity coefficients calculated with Monte Carlo codes are widely used for nuclear data uncertainty quantification in the modeling and simulation of complex 3D reactor systems. This study systematically compares sensitivity coefficients and associated statistical uncertainties for the multiplication factor and fuel temperature reactivity across multiple Monte Carlo codes (SCALE/KENO, SCALE/Shift, MCNP, and Serpent) using simple models representing light-water reactors and advanced reactor concepts. For multiplication factor sensitivities, statistical uncertainties are generally acceptable, although scattering sensitivities show significantly larger statistical uncertainties than, for example, fission and capture reactions. Fuel temperature reactivity sensitivities show significantly larger statistical uncertainties across all reactions. Elastic scattering sensitivities are the most problematic: all Monte Carlo codes fail to resolve energy-dependent coefficients, and they produce dramatically different energy-collapsed values. Critically, the use of these sensitivity coefficients in nuclear data uncertainty propagation leads to reduced statistical uncertainties in individual uncertainty contributions. This can lead to the masking of unusable sensitivity coefficients and producing misleading uncertainty results. The findings of this study show that new or enhanced methods are needed to improve Monte Carlo elastic scattering sensitivity calculations. Additionally, this study shows the relevance of verifying sensitivity coefficients through direct perturbation calculations for individual nuclide reactions, instead of only for total cross sections as commonly done.

Bostelmann, Rike [ORNL] (ORCID:0000000165968088)↗

Earth Occultation Monitoring with the Fermi Gamma Ray Burst Monitor

Using the Gamma Ray Burst Monitor (GBM) on-board Fermi, we are monitoring the hard X-ray/soft gamma ray sky using the Earth occultation technique (EOT). Each time a source in our catalog is occulted by (or exits occultation by) the Earth, we measure its flux using the change in count rates due to the occultation. Currently we are using CTIME data with 8 energy channels spanning 8 keV to 1 MeV for the GBM NaI detectors for daily monitoring. Light curves, updated daily, are available on our website http://heastro.phys.lsu.edu/gbm. Our software is also capable of performing the Earth occultation monitoring using up to 128 energy bands, or any combination of those bands, using our 128-channel, 4-s CSPEC data. The GBM BGO detectors, sensitive from about 200 keV to 40 keV, can also be used with this technique. In our standard application of the EOT, we use a catalog of sources to drive the measurements. To ensure that our catalog is complete, our team has developed an Earth occultation imaging method. In this talk, I will describe both techniques and the current data products available. I will highlight recent and important results from the GBM EOT, including the current status of our observations of hard X-ray variations in the Crab Nebula.

Wilson-Hodge, Colleen A.↗

Reflectance measurements

The productivity of spectroreflectometer equipment and operating personnel and the accuracy and sensitivity of the measurements were investigated. Increased optical sensitivity and better design of the data collection and processing scheme to eliminate some of the unnecessary present operations were conducted. Two promising approaches to increased sensitivity were identified, conventional processing with error compensation and detection of random noise modulation.

Brown, R. A.↗

A study of the ozone photochemistry in the upper stratosphere using LIMS data

LIMS data at vernal equinox conditions are used to study the photochemistry of the upper stratosphere. The results indicate, and it has been recently reported, that with the use of recommended reaction rates, current models underestimate ozone mixing ratio by 20-40 percent. For ozone, good agreement with data is realized with the modification of six key reaction rates within the published limits of uncertainty. These modifications also yield better agreement with data for daytime NO2. Model results for other parameters such as the ratio HNO3/NO2, OH mixing ratio, and the temperature sensitivity of O3 are compared with data.

Natarajan, M.↗

Baryon number violation: from nuclear matrix elements to BSM physics

Processes that violate baryon number, most notably proton decay and $n\bar{n}$ transitions, are promising probes of physics beyond the Standard Model (BSM) needed to understand the lack of antimatter in the Universe. To interpret current and forthcoming experimental limits, theory input from nuclear matrix elements to UV complete models enters. Thus, an interplay of experiment, effective field theory, lattice QCD, and BSM model building is required to develop strategies to accurately extract information from current and future data and maximize the impact and sensitivity of next-generation experiments. Here, we briefly summarize the main results and discussions from the workshop ‘INT-25-91W: Baryon Number Violation: From Nuclear Matrix Elements to BSM Physics,’ held at the Institute for Nuclear Theory, University of Washington, Seattle, WA, 13–17 January 2025.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Space shuttle: A comparison of wind tunnel facility data on the Grumman H-33 delta winged orbiter

A comparison of longitudinal and lateral directional stability and control characteristics of the Phase B Grumman H-33 orbiter configuration obtained from 6 tests conducted in 4 different facilities is presented. The H-33 orbiter configuration does not include drop tanks. Slope data are used as the medium for comparison. The slope data were computed using the SADSAC system and have been reduced to a common reference system. Data used for comparison were selected based on common configurations wherever possible. Where direct configuration comparisons were not possible, the parameters selected for comparison are regarded as insensitive to the noted differences. Factors considered in comparing the various data were scaling effects, balance operating ranges, balance sensitivities and control deflection accuracies. All factors considered, the comparison among data obtained from the various facilities is excellent. The minor differences in stability and control characteristics are well within the accuracy band of preliminary design model construction specifications.

Gyorfi, R. A.↗

Reliability and Confidence Interval Analysis of a CMC Turbine Stator Vane

High temperature ceramic matrix composites (CMC) are being explored as viable candidate materials for hot section gas turbine components. These advanced composites can potentially lead to reduced weight, enable higher operating temperatures requiring less cooling and thus leading to increased engine efficiencies. However, these materials are brittle and show degradation with time at high operating temperatures due to creep as well as cyclic mechanical and thermal loads. In addition, these materials are heterogeneous in their make-up and various factors affect their properties in a specific design environment. Most of these advanced composites involve two- and three-dimensional fiber architectures and require a complex multi-step high temperature processing. Since there are uncertainties associated with each of these in addition to the variability in the constituent material properties, the observed behavior of composite materials exhibits scatter. Traditional material failure analyses employing a deterministic approach, where failure is assumed to occur when some allowable stress level or equivalent stress is exceeded, are not adequate for brittle material component design. Such phenomenological failure theories are reasonably successful when applied to ductile materials such as metals. Analysis of failure in structural components is governed by the observed scatter in strength, stiffness and loading conditions. In such situations, statistical design approaches must be used. Accounting for these phenomena requires a change in philosophy on the design engineer s part that leads to a reduced focus on the use of safety factors in favor of reliability analyses. The reliability approach demands that the design engineer must tolerate a finite risk of unacceptable performance. This risk of unacceptable performance is identified as a component's probability of failure (or alternatively, component reliability). The primary concern of the engineer is minimizing this risk in an economical manner. The methods to accurately determine the service life of an engine component with associated variability have become increasingly difficult. This results, in part, from the complex missions which are now routinely considered during the design process. These missions include large variations of multi-axial stresses and temperatures experienced by critical engine parts. There is a need for a convenient design tool that can accommodate various loading conditions induced by engine operating environments, and material data with their associated uncertainties to estimate the minimum predicted life of a structural component. A probabilistic composite micromechanics technique in combination with woven composite micromechanics, structural analysis and Fast Probability Integration (FPI) techniques has been used to evaluate the maximum stress and its probabilistic distribution in a CMC turbine stator vane. Furthermore, input variables causing scatter are identified and ranked based upon their sensitivity magnitude. Since the measured data for the ceramic matrix composite properties is very limited, obtaining a probabilistic distribution with their corresponding parameters is difficult. In case of limited data, confidence bounds are essential to quantify the uncertainty associated with the distribution. Usually 90 and 95% confidence intervals are computed for material properties. Failure properties are then computed with the confidence bounds. Best estimates and the confidence bounds on the best estimate of the cumulative probability function for R-S (strength - stress) are plotted. The methodologies and the results from these analyses will be discussed in the presentation.

Murthy, Pappu L. N.↗

The Cost of Floating Offshore Wind Energy in California Between 2019 and 2032

California’s energy planning is centered around meeting the emissions reduction and renewable energy requirements of Senate Bill 350 by 2030. However, state power system planning is expected to eventually address California’s requirement to achieve 100% of total retail electricity sales from renewable energy and zero-carbon resources by 2045, as mandated by Senate Bill 100. To comply with these directives, California needs to investigate the further development of energy efficiency, storage, and a diverse range of renewable energy, zero-carbon emission, and transmission resources, including offshore wind. Wind resources off the coast of California have the potential to generate a significant portion of the state’s electric energy as it moves toward a zero-carbon economy and can help diversify its energy mix. Floating offshore wind technology, which is suitable for the deep waters along the California coast, is currently in a precommercial phase, with approximately 84 megawatts (MW) installed worldwide at the end of 2019. Globally there are over 7,000 MW in planning and permitting phases of development, with the first commercial-scale projects expected to be operational in 2024. This study provides site-specific cost and performance data for floating offshore wind to inform California’s long-term energy planning. The identification of new resources to meet California’s policy goals at least cost is part of the Integrated Resource Planning (IRP) process, which is coordinated by the California Public Utilities Commission (CPUC). In 2019–2020 IRP modeling, offshore wind was included for the first time as a candidate resource in some sensitivity cases (CPUC 2019). The data and information presented in this report can be used to update offshore wind inputs in future IRP cycles. The authors conducted a geospatial cost analysis over portions of the offshore wind resource area of California. The analyzed spatial domain includes sites with a mean wind speed of at least 7 meters per second and water depths between 40 meters (m) and 1,300 m. Costs and energy production vary across this analysis domain. We calculated these parameters on a grid layout with over 750 sites, with each site representing a 1,000-MW commercial offshore wind power plant. Levelized cost of energy (LCOE) was calculated at each site over the analysis domain. The resulting variation in LCOE across the analysis domain is illustrated through heat maps in this report. Five study areas were selected within the analysis domain where more detailed cost analysis was conducted and cost parameters, such as annual energy production, capital cost expenditures (CapEx), operational cost expenditures (OpEx), and net capacity factors are reported. These five study areas include Morro Bay, Diablo Canyon, Humboldt, Cape Mendocino and Del Norte.

17 WIND ENERGY↗

Assessing the Usefulness of AIRS Radiance Observations in a 4D-Var Assimilation Scheme Using the Penn State/NCAR Mesoscale Model Version 5 (MM5) and a Stand Alone Radiative Transfer Algorithm (SARTA)

Short-term precipitation forecast skill remains poor despite further advances in numerical modeling and data analysis. Utilizing indirect observations, such as the radiance observations obtained from the Atmospheric Infrared Sounder (AIRS), in a 4D-Var assimilation scheme may lead to a rapid improvement in the skill of 12-h QPF. In order to investigate the usefulness of AIRS observations, the adjoint code of a radiative transfer model (SARTA) is developed and linked to MM5 4D-Var system. A statistical comparison of the AIRS radiances with those calculated using the linked MMS-SARTA model is carried out to assess errors in the radiative transfer model, MM5 and AIRS data, and to develop a quality control scheme. Outliers and any bias that may exist in radiative transfer model, MM5 and AIRS data are identified. An adjoint sensitivity study, utilizing the SARTA adjoint model, is then done to identify the relative sensitivities of each spectral channel to such parameters as atmospheric temperature, pressure, and mixing ratio. Another sensitivity study is done using the MM5 alone to determine the sensitivity of the 12-h QPF to model parameters such as atmospheric temperature, pressure, and mixing ratio under various weather regimes (i.e. summertime convection, winter snowfall). Results from these two types of adjoint sensitivity studies are used to determine which AIRS channels contribute most to 12-h QPF under differing weather regimes. This information is useful when conducting 4D-Var experiments using a subset of the 2378 AIRS spectral channels. Finally, 4D-Var experiments are done to analyze the impact of the AIRS observations on the quality of the 12-h QPF results. This project falls under the data assimilation general session topic as specified by the conference organizers.

Carrier, M.↗

Weather Intelligent Navigation Data and Models for Aviation Planning (WINDMAP)

WINDMAP addresses the emerging needs in the aviation community of providing real-time weather forecasting to improve the safety of low altitude aircraft operations. This is accomplished through the integration of real-time observations from autonomous systems, such as drones and urban air taxis, with numerical weather prediction models and flight management and safety systems. To solve this problem, several technical challenges have been identified. These include (1) developing autonomous UAS capable of conducting observations accurately and reliably; (2) determining the number and frequency of required observations and the sensitivity of these observations in data sparse regions of the lower atmosphere;(3) assimilating dense observational data into models in real-time with sufficient resolution and accuracy; (4) developing novel physics-based reduced order models capable of incorporating diverse data sets; and (5)integrating real-time forecasting into UTM and DAA (detect-and-avoid) architectures for path planning and navigation. The goal of this proposed effort is to demonstrate the value of using small UAS to collect measurements of the dynamic and thermodynamic properties of the lower atmosphere at scales that match or exceed the spatio-temporal resolution of today’s best numerical weather prediction models

Koushik Datta↗

On-the-fly Doppler broadening of unresolved resonance region cross sections

In this paper, two methods for computing temperature-dependent unresolved resonance region cross sections on-the-fly within continuous-energy Monte Carlo neutron transport simulations are presented. The first method calculates Doppler broadened cross sections directly from zero-temperature average resonance parameters. In a simulation, at each event that requires cross section values, a realization of unresolved resonance parameters is generated about the desired energy and temperature-dependent single-level Breit-Wigner resonance cross sections are computed directly via the analytical Ψ-x Doppler integrals. The second method relies on the generation of equiprobable cross section magnitude bands on an energy-temperature mesh. Within a simulation, the bands are sampled and interpolated in energy and temperature to obtain cross section values on-the-fly. Both of the methods, as well as their underlying calculation procedures, are verified numerically in extensive code-to-code comparisons. Energy-dependent pointwise cross sections calculated with the newly-implemented procedures are shown to be in excellent agreement with those calculated by a widely-used nuclear data processing code. Relative differences at or below 0.1% are observed. Integral criticality benchmark results computed with the proposed methods are shown to reproduce those computed with a state-of-the-art processed nuclear data library very well. In simulations of fast spectrum systems which are highly-sensitive to the representation of cross section data in the unresolved region, k-eigenvalue and neutron flux spectra differences of <10 pcm and <1.0% are observed, respectively. The direct method is demonstrated to be well-suited to the calculation of reference solutions — against which results obtained with a discretized representation may be assessed — as a result of its treatment of the energy, temperature, and cross section magnitude variables as continuous. Also, because there is no pre-processed data to store (only temperature-independent average resonance parameters) the direct method is very memory-efficient. Typically, only a few kB of memory are needed to store all required unresolved region data for a single nuclide. However, depending on the details of a particular simulation, performing URR cross section calculations on-the-fly can significantly increase simulation times. Alternatively, the method of interpolating equiprobable probability bands is demonstrated to produce results that are as accurate as the direct reference solutions, to within arbitrary precision, with high computational efficiency in terms of memory requirements and simulation time. Analyses of a fast spectrum system show that interpolation on a coarse energy-temperature mesh can be used to reproduce reference k-eigenvalue results obtained with cross sections calculated continuously in energy and directly at an exact temperature to within <10 pcm. Probability band data on a mesh encompassing the range of temperatures relevant to reactor analysis usually require around 100 kB of memory per nuclide. Finally, relative to the case in which probability table data generated at a single, desired temperature are used, minor increases in simulation times are observed when probability band interpolation is employed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Renewable Energy Potential Model: Geothermal Supply Curves

The Renewable Energy Potential (reV) model is a geospatial platform for estimating technical potential and developing renewable energy supply curves, initially developed for wind and solar technologies. The model evaluates deployment constraints, considering land use, environmental, and cultural factors, and estimates the distance to existing grid features to connect future plants (Maclaurin et al., 2021). A pressing deficiency in the reV model, however, is representation of geothermal electricity generation technologies. To address this gap, we developed a novel geothermal generation module for reV that allows for representation and analysis at the same level of detail as other renewable technologies. The included paper describes our process for evaluating data sources for the modeling, and presents five preliminary reV geothermal results. More specifically, we present two sets of resource data that represent upper and lower bounds for geothermal potential. We then present several sensitivity runs using the upper bound resource data; the results are encouraging that levelized cost of electricity (LCOE) can be reduced by optimizing the location and estimated capacity of the spatially diverse geothermal resource while considering the distance to existing grid infrastructure. Our preliminary supply curves and levelized cost of electricity (LCOE) results provided here should be considered with care due to the high uncertainty in geothermal resource potential data. We present median LCOE values for the conterminous U.S. for three scenarios: two hydrothermal (3.5km depth, USGS heat flow & SMU temperatures respectively) and one EGS (4.5km depth, SMU temperatures). The capital and operating costs for each respective technology are modeled. We also compare results using two different resource data sources.

15 GEOTHERMAL ENERGY↗

An observation of the high charge cosmic ray nuclei

A double scintillator - double Cerenkov particle telescope, was used to study cosmic ray nuclei with Z greater than 14. This telescope had an exposure of 17,000 sq m-sr-sec and, consequently, the results obtained were of considerable statistical weight. Data are presented on the charge spectrum and on the energy spectrum over the sensitivity range of the Cerenkov detector. The data are compared with data available in the literature, and the implications are discussed.

Scarlett, W. R.↗