Search NASA⌕ Search

SEARCH · Search NASA

Results for “Small scale processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Representation of atmosphere-induced heterogeneity in land–atmosphere interactions in E3SM–MMFv2

In the Energy Exascale Earth System Model (E3SM) Multi-scale Modeling Framework (MMF), where parameterizations of convection and turbulence are replaced by a 2-D cloud-resolving model (CRM), there are multiple options to represent land–atmosphere interactions. Here, we propose three different coupling strategies, namely the (1) coupling of a single land surface model to the global grid (MMF), (2) coupling a single land copy directly to the embedded CRM (SFLX2CRM), and (3) coupling a single copy of land model to each column of the CRM grid (MAML). In the MAML (Multi-Atmosphere Multi-Land) framework, a land model is coupled to CRM at the CRM-grid scale by coupling an individual copy of a land model to each CRM grid. Therefore, we can represent intra-CRM heterogeneity in the land–atmosphere interaction processes. There are 5-year global simulations run using these three coupling strategies, and we find some regional differences but overall small changes with respect to whether a land model is coupled to CRM or a global atmosphere. In MAML, the spatial heterogeneity within CRM induces stronger turbulence, which leads to the changes in soil moisture, surface heat fluxes, and precipitation. However, the differences in the MAML from the other two cases are rather weak, suggesting that the impact of using MAML does not justify the increase in cost.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain E?ect on the Instability of Island Formation in Submonolayer Heteroepitaxy

Strain e ect on the instability of island formation in submonolayer heteroepitaxy is studied in both thermodynamic and kinetic regimes. By using linear stability analysis, the energy change of an island due to small perturbations is analyzed. A phase diagram is constructed to illustrate the interplay between kinetic processes and strain e ect on the shape instability. Critical island sizes beyond which islands grow unstable are also derived for various growth conditions and can be used to estimate energy parameters. The scaling forms of shape instability are also discussed.

36 MATERIALS SCIENCE↗

A Multi-Sensor Approach for Measuring Bird and Bat Collisions with Offshore Wind Turbines (Final Technical Report)

Collision of birds and bats with wind turbines is a conservation concern for both land-based and offshore wind projects. The fatality rates of birds and bats at land-based turbines are well documented. The measurement strategies on land focus on finding carcasses following collision, estimating the number of carcasses missed through searcher efficiency, carcass persistence trials and carcass fall distributions, and modeling statistically robust fatality rates. Few technologies have been developed to monitor offshore bird and bat collisions, and many that have been developed focused on detecting collisions with large birds. The few studies that have attempted to document collisions at offshore turbines do not account for smaller bodied animals or for collisions that might be missed, which prevents the calculation of statistically robust fatality rates. The overall goal of this report, A Multi-Sensor Approach for Measuring Bird and Bat Collisions with Offshore Wind Turbines (Project), was to develop an effective multi-sensor system for quantifying bird and bat collision rates, specifically for offshore wind facilities. The Project goal and resulting automated collision detection system was achieved through two major technological advancements: 1) refining The Netherlands Organisation for Applied Scientific Research’s (TNO’s) existing WT-Bird® vibration sensing system, that had successfully detected large bird collisions during daytime, to allow for improved detection of smaller birds and bats during both daytime and nighttime hours and 2) improving image processing systems and developing and integrating machine learning algorithms to automatically detect and classify small and large bird and bat collisions with offshore turbines. This final technical report (FTR) summarizes Methods , Results , Conclusions , and Lessons Learned during each of the five Tasks identified for this research and development effort. This FTR includes summaries of the following: Task 1. Initial Engineering Tests to Improve WT-Bird® Task 2. Installation of WT‐Bird® on a Utility-scale Turbine at the National Wind Technology Center – National Renewable Energy Laboratory Task 3. Field Tests and Refinement of the Object Detection System Task 4. Validation of WT-Bird® on a Land-based Turbine Task 5. Preparation for the Implementation of WT-Bird® on an Offshore Turbine. This research and development effort documented successful improvement of the WT Bird® collision detection system to detect small birds and bats, and WT-Bird® is the first collision detection system to validate results compared to land-based post-construction monitoring. The collision trials provide estimates of missed targets that can be used to estimate fatality rates, a significant improvement relative to other offshore collision monitoring systems. Advances were made in developing an edge-processing solution to reduce data storage requirements, which is important if the system is deployed for long periods of time at offshore turbines. The improved WT-Bird® system also provides an important option for wind operators on land or offshore who need to document specific details about when collisions occur, particularly efforts to further research on bat impact minimization, or when standard fatality searches are impractical (e.g. offshore) or inadequate (e.g. challenging locations on land).

17 WIND ENERGY↗

Cryogenic Carbon Capture™ (CCC) Status Report

The Cryogenic Carbon Capture™ (CCC) process separates CO2 from light gases in essentially any continuous process. CCC cools the gases to the frost or desublimation point of CO2 (-100 to -135 °C), separates and pressurizes the solids, and warms all streams to produce a CO2-depleted stream at ambient pressure and a pure (99+%) pressurized liquid CO2 stream typically to about 150 bar, both at ambient temperature. The process also recovers all gas moisture and most gas impurities less volatile than CO2 (NOx, SOx, Hg, PM, UHC, CCC, etc.) in separable streams. CCC nearly eliminates refrigeration energy for sensible temperature changes through heat integration. CCC does require energy to change the CO2 phase from a mixed vapor to a pressurized fluid, which represents the minimum energy required of any process for this separation. CCC uses additional energy for turbomachinery inefficiencies, heat losses, moisture removal and overall process pressure drop. Aside from these real-world energy demands, CCC operates near the minimum energy required to perform this gas separation by minimizing stream recycling. CCC compresses CO2 as a liquid, which is one of several reasons it costs about about half as much and consumes about half as much energy as an amine process when using flue gases with about 15% CO2. The process also has several major additional advantages, including (a) it is a bolt-on retrofit technology that does not need steam or any modification of existing equipment, (b) it recovers water and nearly all pollutants in addition to CO2 from the flue gas, (c) it enables highly efficient and cost effective energy storage at grid scale and on time scales of minutes, (d) it enables NG storage if the energy storage option is used, and (d) it has a small footprint and is minimally disruptive to existing plants, requiring only electrical power and a gas source to operate. Sustainable Energy Solutions (SES) has scaled this technology through several levels, the largest of which captures nominally 1 tonne of CO2/day and is called the skid system. Skid system field tests include utility-scale power plants, cement plants, heating plants, and other utility or industrial sites that burn natural gas, biomass, coal, shredded tires, municipal waste, and combinations of these fuels. These field tests produced 95-99% CO2 capture with CO2 purities of 99+% and initial CO2 contents that range from 4 to 28%. SES currently seeks to scale the system to merchant scale (10-80 tonnes of CO2 per day). In the process of doing so, SES has demonstrated the potential for CCC to contribute to energy storage and direct air capture in innovative and cost-effective ways. This presentation discusses the overall process and highlights results from field and in-house tests. These include (a) measured CO2 capture rates and operating conditions from in-house and field tests, and (b) predicted utility-scale costs and energy demands. This discussion also includes the application of the CCC technology to energy storage and direct air capture.

20 FOSSIL-FUELED POWER PLANTS↗

High-capacity rotary drum for atomic layer deposition onto powders and small mechanical parts in a hot-walled viscous flow reactor

Atomic layer deposition (ALD) is uniquely capable of providing uniform thin-film coatings on powder substrates, but powder processing has historically required an ALD reactor designed specifically for powders-e.g., a fluidized bed. Tubular hot-walled viscous-flow reactors commonly employed in laboratory-scale ALD research for coating planar substrates such as silicon have been employed previously to coat gram quantities of powder spread out in a thin layer on a tray, but larger quantities of powder introduce long diffusion pathways where reactants are unable to percolate to the bottom of the powder bed to provide uniform coating in reasonable time periods. In this work, we report a rotary drum with a capacity of 100s of grams that is compatible with conventional tubular hot-walled ALD reactors and provides uniform coatings on powders in viscous flow operation. We benchmark this system using Al 2 O 3 ALD with trimethylaluminum and water. We examine the effect of rotation speed and powder quantity on saturation time via in situ quadrupole mass spectroscopy measurements and gravimetric analysis. Finally, the rotary drum we report is able to provide homogenous coating of up to 75g of silica gel powder with a total surface area of similar to 1500m 2 in viscous flow operation with precursor utilization as high as 70%.

47 OTHER INSTRUMENTATION↗

Dissolution zone model of the oxide structure in additively manufactured dispersion-strengthened alloys

The structural evolution of oxides in dispersion-strengthened superalloys during laser-powder bed fusion is considered in detail. Alloy chemistry and process parameter effects on oxide structure are assessed through a parameter study on the model alloy Ni-20Cr, doped with varying concentrations of Y 2 O 3 and Al. Small angle neutron scattering measurements of the dispersoid size distribution show the dispersoid size increases with higher laser power, slower scan speed, and increasing Y 2 O 3 and Al content. Complementary electron microscopy measurements reveal reactions between Y 2 O 3 and Al, even in nanoscale dispersoids, and the presence of micron-scale oxide slag inclusions in select specimens. A scaling analysis of mass and momentum transport within the melt pool, presented here, establishes that diffusional structural evolution mechanisms dominate for nanoscale dispersoids, while fluid forces and advection become significant for larger slag inclusions. These findings are developed into a theory of dispersoid structural evolution, integrating quantitative models of diffusional processes – dispersoid dissolution, nucleation, growth, coarsening – with a reduced order model of time-temperature trajectories of fluid parcels within the melt pool. Calculations of the dispersoid size in single-pass melting reveal a zone in the center of the melt track in which the oxide feedstock fully dissolves. Within this zone the final Y 2 O 3 size is independent of feedstock size and determined by nucleation and growth kinetics. If the dissolution zones of adjacent melt tracks overlap sufficiently with each other to dissolve large oxides, formed during printing or present in the powder feedstock, then the dispersoid structure throughout the build volume is homogeneous and matches that from a single pass within the dissolution zone. Gaps between adjacent dissolution zones result in oxide accumulation into larger slag inclusions. Predictions of final dispersoid size and slag formation using this dissolution zone model match the present experimental data and explain process-structure linkages speculated in the open literature.

36 MATERIALS SCIENCE↗

Mapping Dark Matter on Small Scales with the Cosmic Microwave Background (Final Report)

Sehgal was funded by DOE Grant DE-SC0020441 over the period from 11/1/2019 - 04/30/2024 (no remaining funds are anticipated). Most recently, Sehgal and her group completed a publication forecasting cosmological parameter constraints for a CMB-HD survey, in addition to SO and CMB-S4 (1). One focus of this work was determining the improvement in parameter constraints when removing the gravitational lensing effect from the primordial CMB (a process called delensing). This work also explored the bias to parameters from neglecting baryonic effects, and ways to mitigate that. In addition, this work highlighted that a CMB-HD N eff measurement could tightly constrain the QCD axion in a modelindependent way (see left panel of Figure 1). Sehgal also developed a novel way to probe inflation via CMB experiments by measuring inflationary magnetic fields (IMFs) (2). IMFs are thought to seed the large magnetic fields we observe in galaxies today, and can be measured by looking for anisotropic rotation of the CMB polarization vectors across the sky (an effect called cosmic birefringence). The cosmic birefringence from IMFs has a unique frequency dependence, allowing it to be separated from other sources of cosmic birefringence. In (2), Sehgal and her postdoc also presented a novel way to remove foreground contamination from Galactic magnetic fields using measurements of the polarization of nearby radio sources. The removal of this Galactic contamination is necessary when measuring IMFs at the level of 0.1 nG; IMFs with a strength of at least 0.1 nG are needed to seed the magnetic fields in galaxies we observe today. Since only inflation can generate such a strong magnetic field, measuring such a signal would be a “smoking gun” signature that inflation occurred. Sehgal showed in (2) that CMB-HD could detect such IMFs with at least 3σ significance (see right panel of Figure 1).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Unraveling the Mysteries of Turbulence Transport in a Wind Farm

A true physical understanding of the mysteries involved in the recovery process of the wake momentum deficit, downstream of utility-scale wind turbines in the atmosphere, has not been obtained to date. Field data are not acquired at sufficient spatial and temporal resolutions to dissect some of the mysteries of wake turbulence. It is here that the actuator line method has evolved to become the technology standard in the wind energy community. This work presents the actuator line method embedded into an Open source Field Operation and Manipulation (OpenFOAM) large-eddy simulation solver and applies it to two small wind farms, the first one consisting of an array of two National Renewable Energy Laboratory 5 Megawatt (NREL 5-MW) turbines separated by seven rotor diameters in neutral and unstable atmospheric boundary-layer flow and the second one consisting of five NREL 5-MW wind turbines in unstable atmospheric conditions arranged in two staggered arrays of two and three turbines, respectively. Detailed statistics involving power spectral density (PSD) of turbine power along with standard deviations reveal the effects of atmospheric turbulence and its space and time scales. In conclusion, high-resolution surface data extracts provide new insight into the complex recovery process of the wake momentum deficit governed by turbulence transport phenomena.

17 WIND ENERGY↗

An Innovative Zero-Liquid Discharge Intermediate-Cold-Liquid Eutectic-Freeze Desalination System

A novel freeze desalination technology is presented for purification of water produced from various industrial processes, including oil and gas extraction. The main innovative idea is introducing a water-immiscible intermediate-cold-liquid (ICL) medium which absorbs the cold from a refrigeration cycle and transfers it to a freezing chamber where it is mixed with brine. The cold ICL enters the freezing chamber at temperatures between -10°C to -30°C. Precooled brine in injected into the freezing chamber and pure water freezes out of the brine upon mixing with the ICL. The rate of freezing inside the chamber is controlled by adjusting the flow rate of the cold ICL relative to the inlet brine. Both eutectic freeze and non-eutectic freezing are possible by controlling the temperature of the freezing chamber. The solid-liquid slurry created in the freezing chamber flows to a filter separation unit after passing through a separation column. The ice crystals are separated from the liquid by a rotary filter device. The collected ice is rinsed by a centrifugal unit. The rinsed ice is melted to produce fresh water. The developed technology resolves the issues common to current freeze-desalination systems while offering superior heat transfer performance ascribed to direct-contact between the cooling medium and the brine in addition to producing solid salt and pure water. The system operates under atmospheric pressure. The low operation temperature minimizes the corrosion issues common in systems exposed to brine. Also, due to the low operating temperature, there are no concerns about evaporation of volatile organics from the produced water during the treatment. The developed technology effectively eliminates the use of chemicals for pretreatment of brine. The system can be constructed from commercially available components. Extensive testing using a lab-scale prototype by using synthetic brine and actual produced water with TDS values from 50,000 ppm to 300,000 ppm showed that freshwater could be achieved with relatively small dependency on the quality of the input brine. The quality of the treated water was found to be mainly a function of the duration of the centrifugal process. Treated water with TDS as low as 200 ppm could be achieved in the tests. Thermo-economic modeling coupled with system level thermochemical process model were developed for prediction of the LCOW. The LCOW was predicted to be $\$$0.50 to $\$$0.90 per barrel of produced water. The potential markets for deployment of the technology are the oil and gas, in-land thermoelectric powerplants, RO desalination plants, and mining industry.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Oxidation and Associated Pore Structure Modification During Experimental Alteration of Granite

Weathering plays a crucial role in a number of environmental processes, and the microstructure and evolution of multi-scale pore space is a critically important factor in the weathering of geological formations. In igneous rocks the infiltration of meteoric water into initially relatively dry material can cause the rock to begin to disaggregate, increasing porosity and surface area, and allowing further disaggregation and weathering to occur. These processes, in turn, allow biota to colonize the rock, further enhancing the weathering rate. In some igneous rocks this may be driven by oxidation of primary minerals. One such mineral, biotite, has been repeatedly mentioned as a cause of cracking during oxidation. However, the scale-dependence of the processes by which this occurs are poorly understood. We cannot, therefore, accurately extrapolate laboratory reaction rates to the field in predictive numerical models. In order to better understand the effects of oxidation and test the hypothesis that fracture and disaggregation are initiated by swelling of oxidizing biotites, we reacted granite cores in a selenic acid-rich aqueous solution at 200°C for up to 438 days. Elevated temperatures and selenic acid were used to provide relatively fast reaction rates and highly oxidizing conditions in sealed reaction vessels. These experiments were analyzed using a combination of imaging, X-ray diffraction, Mössbauer spectroscopy, and small- and ultra-small angle neutron scattering to interrogate porosity and microfracture formation. The experimental results show little observable biotite swelling, but significant transport and growth of iron oxides and/or clays along grain boundaries throughout the sample. Significant increases in porosity were also observed at the sample rim, likely associated with feldspar alteration. Fractures and transport were observed throughout the core, suggesting that stresses due to crystallization pressures caused by the growing iron phases may be the initiating factors in granite weathering, possibly followed by biotite swelling after sufficient permeability is achieved.

Anovitz, Lawrence M.↗

Intern Poster Session

This poster has been developed for display during the 2023 Intern Poster Session. The poster is apart of the Nuclear Research and Experiments category. The focus of this poster is on the modifications made to the design of an integral effect test (IET) facility currently being designed for a new Small Modular Reactor (SMR) design. My contributions made to the IET facility are laid out along with an explanation on some of the aspects of designing a new nuclear reactor. This poster covers the ideas and importance of scaling and IET facilities with the context of the standards set by the NRC. There are also graphics of some other examples of IET facilities developed for other reactor designs. My contributions include designing the piping and instrumentation layout of the IET facility using CAD software. This is a key step in the process of designing this IET facility and needs to be designed to avoid excessive head loss.

42 ENGINEERING↗

Fast increased fidelity samplers for approximate Bayesian Gaussian process regression

Gaussian processes (GPs) are common components in Bayesian non-parametric models having a rich methodological literature and strong theoretical grounding. The use of exact GPs in Bayesian models is limited to problems containing several thousand observations due to their prohibitive computational demands. We develop a posterior sampling algorithm using H-matrix approximations that scales at O(n log 2 n). We show that this approximation’s Kullback-Leibler divergence to the true posterior can be made arbitrarily small. Though multidimensional GPs could be used with our algorithm, d-dimensional surfaces are modeled as tensor products of univariate GPs to minimize the cost of matrix construction and maximize computational efficiency. We illustrate the performance of this fast increased fidelity approximate GP, FIFA-GP, using both simulated and non-synthetic data sets

97 MATHEMATICS AND COMPUTING↗

Oxide Dispersion Strengthened Ferritic Steel Wire Feedstock Development for Larger Format Additive Manufacturing (CRADA Final Report)

This CRADA project funded through DOE’s INFUSE program sought to demonstrate the viability of fabricating large, complex parts from oxide dispersion strengthened (ODS) steel with advanced manufacturing. Exhibiting excellent radiation tolerance and high mechanical performance at elevated temperatures, ODS steel is a promising structural material candidate for near-plasma components in fusion energy systems. Its use, however, has been limited by a lack of manufacturability. This project sought to produce ODS steel wire through a solid-state shear assisted extrusion process and then demonstrate that the wire can undergo controlled local melting while being welded with the final part sufficiently retaining the beneficial properties of ODS steel. This would allow the use of wire-arc additive manufacturing (WAAM) to manufacture large-scale ODS parts, even though ODS is currently only available as a powder. WAAM is a promising technique for producing components like the replaceable ARC vacuum vessel in CFS’ fusion reactor design. Meanwhile, this project will also expand PNNL’s capability in producing custom wire feedstock with friction extrusion, enabling downstream large-scale manufacturing with WAAM and solid-state based additive manufacturing. The project achieved its goals of developing tooling and fixturing to produce ODS wire at smaller diameters than previous projects. Several small lengths of wire of 1.5 mm and 2.5 mm diameter in the range of 2.5-30 mm long were produced at tool temperatures that are known to cause ODS particle coarsening (~1200 °C). Fixtures and tooling for longer (>1 m) wires were developed but further process development is needed reduce tool temperature during extrusions and to increase wire length needed for WAAM testing and development.

36 MATERIALS SCIENCE↗

Environmentally Sound One-Step Solar Silicon From Natural Quartzite

This project aimed to demonstrate a new molten salt electrodeposition process to go straight from low-cost silica at $200/tonne ($40¢/kg Si basis) to polysilicon in a single step using less than 30 kWh/kg. This would eliminate the carbothermic reduction step and all direct greenhouse emissions, along with 90% of the energy. It would also eliminate the chemical hazards of chlorosilane handling which have resulted in multiple fatalities in the polysilicon industry – in Japan, the US and China. This project had the following major accomplishments: Stakeholder engagement indicated that the solar silicon market is very sensitive to price, provided quality is sufficient. The most important measure of silicon quality is not purity but carrier lifetime, as many impurities can reduce performance at concentrations too small to measure; Experiments set a baseline of current efficiency which is too low for commercial application (~3%), with electronic current ruled out as a mechanism for reduced current efficiency; A scale-up plant narrative narrative described a potential plant and formed the basis for the TEA components; TEA showed that current efficiency, large cell size, and zirconia membrane lifetime are key factors which determine capital and operating costs for the process.

14 SOLAR ENERGY↗

A reduced-order modeling approach to represent subgrid-scale hydrological dynamics for land-surface simulations: application in a polygonal tundra landscape

Existing land surface models (LSMs) describe physical and biological processes that occur over a wide range of spatial and temporal scales. For example, biogeochemical and hydrological processes responsible for carbon (CO 2 , CH 4 ) exchanges with the atmosphere range from the molecular scale (pore-scale O 2 consumption) to tens of kilometers (vegetation distribution, river networks). Additionally, many processes within LSMs are nonlinearly coupled (e.g., methane production and soil moisture dynamics), and therefore simple linear upscaling techniques can result in large prediction error. In this paper we applied a reduced-order modeling (ROM) technique known as "proper orthogonal decomposition mapping method" that reconstructs temporally resolved fine-resolution solutions based on coarse-resolution solutions. We developed four different methods and applied them to four study sites in a polygonal tundra landscape near Barrow, Alaska. Coupled surface–subsurface isothermal simulations were performed for summer months (June–September) at fine (0.25 m) and coarse (8 m) horizontal resolutions. We used simulation results from three summer seasons (1998–2000) to build ROMs of the 4-D soil moisture field for the study sites individually (single-site) and aggregated (multi-site). The results indicate that the ROM produced a significant computational speedup (> 10 3 ) with very small relative approximation error (< 0.1%) for 2 validation years not used in training the ROM. We also demonstrate that our approach: (1) efficiently corrects for coarse-resolution model bias and (2) can be used for polygonal tundra sites not included in the training data set with relatively good accuracy (< 1.7% relative error), thereby allowing for the possibility of applying these ROMs across a much larger landscape. By coupling the ROMs constructed at different scales together hierarchically, this method has the potential to efficiently increase the resolution of land models for coupled climate simulations to spatial scales consistent with mechanistic physical process representation.

Pau, G. S. H.↗

Embracing Anisotropy – Opportunities and Challenges to the Functional Application of Advanced Manufacturing of Energetic Materials

The growing use of additive manufacturing (AM) to manipulate materials, such as metals and plastics, is a result of the desire to realize the potential benefits (i.e., cheaper, faster, and simpler production of complex parts) of the process and the efforts of countless researchers to reduce the method to practice for a broad range of materials. However, in the field of energetic materials (EMs), similar benefits have been broadly claimed, but the transition to practical, industrial applications is still not obvious. The translation of small-scale experimental results to real-world application will have unique challenges, especially due to the nature and requirements of EM functionality. Some of the benefits of AM, such as simpler and faster part creation, are more easily realized. However, attaining the most profound benefits, such as added functionality enabled by spatial gradations of composition or density, will require much more effort from the EMs community to put them into general use.

36 MATERIALS SCIENCE↗

Some stars are totally metal: a new mechanism driving dust across star-forming clouds, and consequences for planets, stars, and galaxies

Dust grains in neutral gas behave as aerodynamic particles, so they can develop large local density fluctuations entirely independent of gas density fluctuations. Specifically, gas turbulence can drive order-of-magnitude 'resonant' fluctuations in the dust density on scales where the gas stopping/drag timescale is comparable to the turbulent eddy turnover time. Here we show that for large grains (size ≳ 0.1 μm, containing most grain mass) in sufficiently large molecular clouds (radii ≳ 1-10 pc, masses ≳ 10{sup 4} M {sub ☉}), this scale becomes larger than the characteristic sizes of prestellar cores (the sonic length), so large fluctuations in the dust-to-gas ratio are imprinted on cores. As a result, star clusters and protostellar disks formed in large clouds should exhibit significant abundance spreads in the elements preferentially found in large grains (C, O). This naturally predicts populations of carbon-enhanced stars, certain highly unusual stellar populations observed in nearby open clusters, and may explain the 'UV upturn' in early-type galaxies. It will also dramatically change planet formation in the resulting protostellar disks, by preferentially 'seeding' disks with an enhancement in large carbonaceous or silicate grains. The relevant threshold for this behavior scales simply with cloud densities and temperatures, making straightforward predictions for clusters in starbursts and high-redshift galaxies. Because of the selective sorting by size, this process is not necessarily visible in extinction mapping. We also predict the shape of the abundance distribution—when these fluctuations occur, a small fraction of the cores may actually be seeded with abundances Z ∼ 100 (Z) such that they are almost 'totally metal' (Z ∼ 1)! Assuming the cores collapse, these totally metal stars would be rare (1 in ∼10{sup 4} in clusters where this occurs), but represent a fundamentally new stellar evolution channel.

79 ASTRONOMY AND ASTROPHYSICS↗