Search NASA⌕ Search

SEARCH · Search NASA

Results for “Source tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Multi-system report integration using blackboards

Blackboards are an Al problem solving methodology. A blackboard system consists of a structured data base (the blackboard) holding input and derived inferences and a collection of procedures for deriving inferences (knowledge sources). Each knowledge source is specialized to operate on some portion of the blackboard. The knowledge sources are invoked opportunistically as the information on the blackboard increases. The methodology is well suited to integrating multiple streams of fully reduced and qualitatively different data such as active radar track reports, passive electronic intelligence reports, and human intelligence reports about enemy intentions. This paper sketches the nature of the blackboard problem solving methodology with an emphasis on those features suiting it to such applications. The sketch is illustrated with examples from a relatively simple multi-system report integration problem. Relevant applications currently under development at Stanford's Knowledge Systems Laboratory are also described.

Delaney, J. R.↗
NASA NTRS1993

Ultrastable reference frequency distribution utilizing a fiber optic link

The Frequency Standards Laboratory at the Jet Propulsion Laboratory (JPL) is responsible for the generation and distribution of ultra-stable reference frequency in NASA's Deep Space Network (DSN). Certain assemblies and components of the Radio Science and VLBI systems are located in the cones of tracking antennas hundreds of meters from the Frequency and Timing Subsystem's frequency standards. The very stringent requirements of these users challenge the performance of state-of-the-art frequency sources as well as the associated signal distribution system. The reference frequency distribution system described is designed around a low temperature coefficient of delay (TCD) optical fiber. On-site measurements of the fiber optic link alone indicate 100 MHz phase noise performance on the order of -120 dBc at 1 Hz from the carrier and Allan deviation on the order of parts in 10(exp 16) at 1000 seconds averaging time. The measured phase noise and stability of the link indicate that the performance characteristics of the hydrogen maser frequency standards are not degraded by the distribution system. Thus, optical fibers and electro-optic devices as distribution media appear to be a viable alternative to the classical coaxial cable distribution systems.

Calhoun, Malcolm↗
NASA NTRS2017

Multiwavelength Follow-up of a Rare Icecube Neutrino Multiplet

IceCube detected three neutrino-induced track events arriving within less than 100s from a similar direction. Expected chance occurrence rate of 1 every 14 years, so not exceptionally rare, but interesting. If astrophysical in nature, the source would have to be relatively nearby or be an exceptional bright neutrino emitter. Follow-up observations by Swift-BAT, Swift-XRT, Master, ASAS-SN, LCOG, Veritas, FACT, and HAWC. The IceCube collaboration wanted to produce a paper summarizing the non-detections and outlining the follow-up network they have assembled. We were asked by Anna Franckowiak to contribute Fermi analysis to their write-up of this event.

Multi wave length↗
NASA NTRS2019

VHF antenna far-field pattern measurements at 60 MHz using an outdoor antenna range for Europa Clipper mission

Improvements to measurements of a VHF folded dipole operating at 55-65 MHz to be used as part of a radar for a mission to one of Jupiter’s moons, Europa, are presented. Previous measurements using an unmanned aerial vehicle (UAV) or small unmanned aerial system (sUAS) are improved upon by reducing systematic errors and more accurately tracking distances within the measurement system on an outdoor measurement range at Jet Propulsion Laboratory (JPL). Details of the measurement system setup are presented along with a brief discussion of error sources. Comparing previously collected measurement data with the new measurements reveal an improvement of approximately 0.4 dB in accuracy with an improvement in over 1 dB for error budgets.

Decrossas, Emmanuel↗
NASA NTRSDate not supplied

Assimilation of Soil Moisture Observations Over Land Improves Analysis and Prediction of Tropical Cyclone Idai

Soil moisture conditions can impact the circulation and structure of a tropical cyclone (TC) when part or all of the circulation is over land. Dry land surface conditions may lead to faster dissipation of a TC over land, whereas very wet conditions may lead to a prolonged maintenance of its intensity. While this relationship is relatively well understood in theory, applications of these findings in the context of numerical weather prediction (NWP) have been limited. Here we present a case study that explores the potential of improving TC predictions through an improved soil moisture initialization in an NWP framework. Specifically, we examine the impact of assimilating observations from the NASA Soil Moisture Active Passive (SMAP) mission into the NASA Goddard Earth Observing System (GEOS) global weather model on the prediction of South-West Indian Ocean TC Idai (2019). SMAP provides accurate L-band (1.4 GHz) brightness temperatures (Tb) observations that are sensitive to soil moisture globally and at high revisit times of 2-3 days. It has previously been shown that the assimilation of SMAP Tbs significantly improves modeled land surface states. Here we evaluate: (i) forecasts initialized from an analysis that is comparable to the GEOS operational analysis (without SMAP Tb assimilation) and (ii) forecasts initialized from an analysis that additionally assimilates SMAP Tb observations. We find that in the analysis with SMAP assimilation, the TC has a better-defined, more aligned vertical structure over land relative to the control run; moreover, the analyzed TC size, as measured by the wind speed radius, better matches the observed TC size. We further find significant reductions in the forecast intensity error and the forecast along-track error, measured against observations. The largest error reductions occur at lead times of 36 to 72 hours, suggesting that the land with its longer memory gains in importance as a source of predictability at this timescale. An investigation of the underlying mechanisms leading to the skill improvements from SMAP data assimilation revealed that the assimilation of SMAP leads to wetter soil moisture conditions and an increased latent heat flux in the SMAP analysis, which results in a TC with higher column-integrated total moisture content and total energy compared to the control analysis.

Jana Kolassa↗
DOE OSTI2019

Particle tracks recorded by ProtoDUNE

This 3-D display shows particle tracks recorded by ProtoDUNE. The video shows the full size of the single-phase ProtoDUNE detector (white box) and the direction of the particle beam (yellow arrow). Particles from other sources (such as cosmic rays) can be seen throughout the white box, while the red box highlights the region of interest: in this case, an interaction resulting from the particle beam passing through the detector. Event information, such as the momentum of particles in the beam and time of interaction, are located in the lower left corner. A selection of 3-D events from ProtoDUNE-SP are available in an online gallery developed by Chao Zhang of Brookhaven National Laboratory (https://www.phy.bnl.gov/twister/bee/s...) for curious minds that want to play with the interface. Learn more about ProtoDUNE here: http://news.fnal.gov/2019/01/success-... And learn more about DUNE here: http://www.fnal.gov/dune

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRSDate not supplied

Tracking Metabolic Changes in Microbial Culture using Redox Measurements

During long-term space missions, microbial cultures accumulate the effects of low-dose radiation, microgravity, and other factors; altered growth and metabolic activity may occur before viability effects. This could affect functionality of bioreactors or other bio-enabled mission systems, as well as shed light on human health. Spaceflight microbiology studies beyond the low Earth orbit exposure afforded by the ISS have been limited. Nanosatellites offer an increasingly popular alternative for deep space missions. However, the communications delay requires biofluidic automation of a pre-defined experimental protocol, and the lack of sample return (reliance on sensors in flight) can significantly limit feasible investigations. Previous biological CubeSats (PharmaSat, O/OREOS, EcAMSat) have used alamarBlue, an off-the-shelf formulation of the redox indicator dye resazurin, to track metabolic activity, as will BioSentinel, the upcoming interplanetary microbiology experiment. A series of ground experiments (see abstracts by Liddell, Santa Maria, and A. Kim) were conducted using a microbial culture system outfitted with an electrochemical sensor array (electrical conductivity, pH, oxidation-reduction potential, and dissolved oxygen) with alamarBlue and the same strain of Saccharomyces cerevisiae as BioSentinel. By improving mapping of measured changes in alamarBlue kinetics to physicochemical changes, and ultimately to biological alterations such as shifted metabolic pathways, this work supplements data analyses from past missions and planning for future missions using alamarBlue to characterize space radiation effects. Initial results indicate that alamarBlue acts like a redox buffer; its presence significantly changes redox kinetics in otherwise identical cultures. The initial color change (blue resazurin reduced to red/pink resorufin) appears as a redox plateau. A second plateau, likely corresponding to the second color transition (resorufin to the colorless hydroresorufin), occurs at a lower redox value. The relationship to carbon source exhaustion, dissolved oxygen depletion, cell death, and measured redox potential is complex and still under study.

Tracking↗
DOE OSTI2025

Fusing Edge Computing with Transport Security by Leveraging the Controller Area Network Transport Security Tracking and Reporting (C-STAR) Unit

Rapid advances in embedded system complexity and capability provides exciting opportunities for transportation security deployment. Manufacturers and developers of these embedded systems continue to provide lower cost and more powerful solutions that can be leveraged by researchers and engineers. Furthermore, deploying these devices at the “edge” of the Internet-of-Things (IoT) infrastructure provides opportunities for highly capable applications in transport security. In an edge computation architecture, the device is co-located at the source of the data in the larger IoT structure – this provides computational capability at the location directly where the data is collected. For shipment transport security, this provides a direct compute node for digestion of data and mitigation actions in real-time. In our application, the vehicle provides a significant amount of this data that can be processed in real-time via the Controller Area Network Transport Security Tracking and Reporting (C-STAR) edge device. Utilization of a computational node located on the vehicle, such as the C-STAR, capitalizes on previously discussed opportunities of edge architectures. In this paper, we will discuss this security solution’s usability, current deployments, and scalability to further applications in transport security. First, we will cover the supported vehicle platforms that can leverage the C-STAR technology. This will be particularly relevant to medium- and heavy-duty vehicles transporting high-risk shipments. Second, we will speak to current deployments of the C-STAR that are ongoing. Finally, we will discuss additional areas for expansion such as maturing the onboard algorithms through continuing collaborations.

Cook, Adian [ORNL] (ORCID:0000000160825395)↗
DOE OSTI2025

An isotopic labeling investigation into the influence of the nitro group on LLM-105 thermal decomposition

Here, this work presents the first application of isotopically labeled LLM-105 (2,6-diamino-3,5-dinitropyrazine-1-oxide) to investigate thermal decomposition pathways. Specially synthesized LLM-105 isotopologues were utilized to isolate the influence of labeled 15 NO 2 nitro groups on the formation of lightgas products. Simultaneous differential scanning calorimetry, thermo-gravimetric, and mass spectrometry measurements were employed to track the evolution of product gases, enabling the direct comparison of isotopically shifted species with unlabeled LLM-105. Key findings show that C 2 N 2 production is mainly dependent on nitrogen sources from either the amine groups or the pyrazine ring (i.e., not the nitro groups). The formation of NO, N 2 , and N 2 O all involves the nitro groups to some extent. NO (nitric oxide) was found to be the predominant gas species directly formed from the nitro group of LLM-105. In contrast, mixed nitrogen isotopologues of N 2 and N 2 O (i.e., 14 N 15 N and 15 NNO) formed more readily in comparison to their pure counterparts (i.e., 15 N 2 and 15 N 2 O). This indicates the amine and/or pyrazine groups of LLM-105, in addition to the nitro group, are involved in the decomposition pathways forming N 2 and N 2 O. In addition, our investigation led to the discovery of two previously unreported decomposition products (CHO and HNCO), which were confirmed through hydrogen labelling utilizing deuterium isotopes. These results provide detailed speciation trends of gaseous products during LLM-105 decomposition, offering new insights into reaction pathways. Experimental data reported here will support the development of a detailed chemical kinetics model for LLM-105, essential for the safe handling of high explosives.

Chemistry - Chemical explosives↗
DOE OSTI2020

State-of-the-art γ-ray assay of 86 Y for medical imaging

An emerging direction in nuclear medicine is the coupling of a therapeutic isotope with an imaging isotope to form a so-called theranostic pair, which allows one to quantitatively track and image the delivery of the therapeutic isotope. 90 Y is used in several therapy applications and a convenient candidate imaging partner is the positron emitter 86 Y. A 27.6 MBq source of 86 Y was produced at the University of Wisconsin and assayed with the Gammasphere array at Argonne National Laboratory. Over 200 γ-ray transitions were identified, more than double that which was previously known. In conclusion, the positron emission probability inferred from the present level scheme leads to 27.9(12)%, an important (≈14%) reduction with respect to the previously recommended value.

59 ≤ A ≤ 89↗
NASA NTRS1976

The OSU self-phased array for propagation measurements using the 11.7 GHz CTS beacon

A self phased array was developed for propagation measurements on an earth-space path. The 11.7 GHz CTS beacon was used as the signal source. The self phased array was used to measure angle of arrival as well as attenuation and scintillation statistics. The performance of the array is described, and sample data are presented. The tracking capability of the self phased array was also studied. This technique permits fully electronic, nonmechanical satellite tracking, thus simplifying unmanned operation and eliminating severe weather tracking constraints.

Theobold, D. M.↗
NASA NTRS1988

Synchronous response modelling and control of an annular momentum control device

Research on the synchronous response modelling and control of an advanced Annular Momentun Control Device (AMCD) used to control the attitude of a spacecraft is described. For the flexible rotor AMCD, two sources of synchronous vibrations were identified. One source, which corresponds to the mass unbalance problem of rigid rotors suspended in conventional bearings, is caused by measurement errors of the rotor center of mass position. The other sources of synchronous vibrations is misalignment between the hub and flywheel masses of the AMCD. Four different control algorithms were examined. These were lead-lag compensators that mimic conventional bearing dynamics, tracking notch filters used in the feedback loop, tracking differential-notch filters, and model-based compensators. The tracking differential-notch filters were shown to have a number of advantages over more conventional approaches for both rigid-body rotor applications and flexible rotor applications such as the AMCD. Hardware implementation schemes for the tracking differential-notch filter were investigated. A simple design was developed that can be implemented with analog multipliers and low bandwidth, digital hardware.

Hockney, Richard↗
NASA NTRS1995

Radial alignment simulation of solar wind streams observed by Pioneers 10 and 11 in 1974

A particularly favorable radial lineup between spacecraft in Earth orbit and Pioneers 10 and 11 (near the ecliptic plane at approximately 5.5 AU and approximately 4.5 AU, respectively) occurred in mid-1974, when the solar corona was in a stable and well-defined warped-dipole configuration. The radial alignment study reported here differs from previous applications of the technique in two respects: (1) It is the first time a two-dimensional (2-D) MHD model has been tested over such a lengthy propagation interval; the 2-D capability is crucial for treatment of the nonradial shearing motions occurring across the stream interface. (2) The three-dimensional (3-D) structure observed in the white light corona at that time is related to the systematic patterns of nonradial flow deflections appearing at the Pioneer corotating interaction region (CIR) fronts. Comparison of predicted and observed flows for pairs of streams in two successive rotations reveals that when the parent coronal hole projects far across the solar equator in a predominantly north-south orientation (i.e., nearest the 2-D idealization), the mapping is accurate down to details of the flow structures. But where the spacecraft tracks along a latitudinal boundary of a hole or the associated stream front is inclined at a shallow angle to the equator, the numerical projections deviate systematically from the observations. Among the sources of error are 3-D dynamical interactions neglected in the model, differential rotation effects, and slow temporal evolution of the coronal structures. A characteristic pattern of north-south and east-west deflections indicative of the 3-D geometry appears across the CIRs, but these patterns evidently reflect primarily the local, as opposed to global, orientation of the 3-D stream fronts. Such patterns appear common in CIRs observed by Pioneer during this period. These findings thus hold special relevance for the analysis of Ulysses observations, since the present coronal configuration is similar to that of 1974.

Pizzo, V. J.↗
NASA NTRSDate not supplied

Lean Model-Based Systems Engineering on the NASA High-Density Vertiplex Subproject

The High Density Vertiplex (HDV) subproject of NASA’s Advanced Air Mobility (AAM) project adopted Model-Based Systems Engineering (MBSE)in July of 2020, prior to subproject formulation. A small and lean team of HDV Systems Engineers(SE) are utilizing MagicDraw to execute NASA SE processes via MBSE. The SEs learned how to use MagicDraw from scratch and HDV is the first project for which the SEs have utilized MagicDraw. This paper will demonstrate project technical execution via MBSE, utilizing the digital elements built into the SysML (Systems Modeling Language). SysML provides a model-centric means of carrying out the NASA SE common technical processes by providing tools for complete system modeling, including requirements and interface management and design capture. The authors also leverage and extend SysML to perform other SE tasks, such as Verification and Validation (V&V)tracking. MBSE has two main purposes for HDV: 1) documenting the subproject’s logical architecture for distribution outside of the subproject, 2) capturing the subproject’s physical architecture in a single-source-of-truth for use by the subproject’s members. This paper details the challenges, lessons learned, and solutions that were encountered in implementing MBSE in the first iteration on a multi-iteration, full-lifecycle design, build, fly project.

Demetrios Katsaduros↗
NASA NTRS2022

MSL MMRTG Power Modeling for Lifetime Performance Predictions

The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) has been providing power to the Mars Science Laboratory (MSL) rover, Curiosity, for surface operations since 2012. The Jet Propulsion Laboratory (JPL) has employed the Life Performance Prediction Model (LPPM) to generate predictions and outputs based upon flight data from the rover and experimental data from the thermoelectric (TE) couples. In order to make these predictions, LPPM requires various spacecraft inputs relevant to RTG performance such as fin root temperature, load voltage, general purpose heat source (GPHS) inventory, etc., combined with couple data such as thermoelectric properties, interface degradation, and sublimation properties. With tens of thousands of hours of flight data to date, LPPM can not only track performance to date, but also make predictions on the power output of the MMRTG through the 17-year end-of-design-life (EODL). These predictions are useful for mission planners and surface operators who rely on the MMRTG for power in order to perform the critical science necessary during the mission. This paper will showcase the power data extracted from the flight electronics, comparing it to the predictions and outputs generated from LPPM.

Pinkowski, Stanley↗
NASA NTRSDate not supplied

Lean Model-Based Systems Engineering on the NASA High-Density Vertiplex Subproject

The High Density Vertiplex (HDV) subproject of NASA’s Advanced Air Mobility (AAM) project adopted Model-Based Systems Engineering (MBSE) in July of 2020, prior to subproject formulation. A small and lean team of HDV Systems Engineers (SE) are utilizing MagicDraw to execute NASA SE processes via MBSE. The SEs learned how to use MagicDraw from scratch and HDV is the first project for which the SEs have utilized MagicDraw. This presentation will demonstrate project technical execution via MBSE, utilizing the digital elements built into the SysML (Systems Modeling Language). SysML provides a model-centric means of carrying out the NASA SE common technical processes by providing tools for complete system modeling, including requirements and interface management and design capture. The authors also leverage and extend SysML to perform other SE tasks, such as Verification and Validation (V&V) tracking. MBSE has two main purposes for HDV: 1) documenting the subproject’s logical architecture for distribution outside of the subproject, 2) capturing the subproject’s physical architecture in a single-source-of-truth for use by the subproject’s members. This presentation details the challenges, lessons learned, and solutions that were encountered in implementing MBSE in the first iteration on a multi-iteration, full-lifecycle design, build, fly project.

systems engineering↗
DOE OSTI2015

Solar concentrator with integrated tracking and light delivery system with collimation

A solar light distribution system includes a solar light concentrator that is affixed externally to a light transfer tube. Solar light waves are processed by the concentrator into a collimated beam of light, which is then transferred through a light receiving port and into the light transfer tube. A reflector directs the collimated beam of light through the tube to a light distribution port. The interior surface of the light transfer tube is highly reflective so that the light transfers through the tube with minimal losses. An interchangeable luminaire is attached to the light distribution port and distributes light inside of a structure. A sun tracking device rotates the concentrator and the light transfer tube to optimize the receiving of solar light by the concentrator throughout the day. The system provides interior lighting, uses only renewable energy sources, and releases no carbon dioxide emissions into the atmosphere.

14 SOLAR ENERGY↗
DOE OSTI2021

Design Power Control Strategies of Grid-Forming Inverters for Microgrid Application: Preprint

This paper compares two control schemes in the application control layer of a non-PLL grid-forming (GFM) inverter to gain the insights and understanding of how the two schemes affect the dynamic responses of the GFM inverters and the transition operation of microgrids. Both schemes can achieve smooth microgrid transition operation and power tracking, however, the first scheme expects to exhibit more transients due to the feedforward of the inverse dynamic model of the output filter. Simulation results show that both control schemes achieve successful transition operation with smooth transients, and the second control scheme exhibits slightly better transients in the system frequency during islanding operation and the first one has slightly superior transients in the system frequency during reconnection operation. The power tracking performance in the grid-connected mode is evaluated, which shows that the first scheme has better active power tracking and the second one has better reactive power tracking. The analysis and results are useful to develop reliable control schemes for non-PLL GFM inverters because more and more inverters will work as non-PLL grid-forming sources in the future grids due to better stability and reliability.

grid-forming inverter↗