Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Computer-aided discovery of a metal–organic framework with superior oxygen uptake

Current advances in materials science have resulted in the rapid emergence of thousands of functional adsorbent materials in recent years. This clearly creates multiple opportunities for their potential application, but it also creates the following challenge: how does one identify the most promising structures, among the thousands of possibilities, for a particular application? Here, we present a case of computer-aided material discovery, in which we complete the full cycle from computational screening of metal–organic framework materials for oxygen storage, to identification, synthesis and measurement of oxygen adsorption in the top-ranked structure. We introduce an interactive visualization concept to analyze over 1000 unique structure–property plots in five dimensions and delimit the relationships between structural properties and oxygen adsorption performance at different pressures for 2932 already-synthesized structures. We also report a world-record holding material for oxygen storage, UMCM-152, which delivers 22.5% more oxygen than the best known material to date, to the best of our knowledge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of thermal cycling in a Mach 0.3 burner rig on properties and structure of directionally solidified gamma/gamma prime - delta eutectic

Tensile and stress rupture properties at 1040 C of a thermally cycled gamma/gamma prime - delta eutectic were essentially equivalent to the as-grown properties. Tensile strength and rupture life at 760 C appeared to decrease slightly by thermal cycling. Thermal cycling resulted in gamma prime coarsening and Widmanstatten delta precipitation in the gamma phase. An unidentified precipitate, presumably gamma prime, was observed within the delta phase. The eutectic alloy exhibited a high rate of oxidation-erosion weight loss during thermal cycling in the Mach 0.3 burner rig.

Gray, H. R.↗

The Effect of Interlayer Delay on the Heat Accumulation, Microstructures, and Properties in Laser Hot Wire Directed Energy Deposition of Ti-6Al-4V Single-Wall

Laser hot wire directed energy deposition (LHW-DED) is a layer-by-layer additive manufacturing technique that permits the fabrication of large-scale Ti-6Al-4V (Ti64) components with a high deposition rate and has gained traction in the aerospace sector in recent years. However, one of the major challenges in LHW-DED Ti64 is heat accumulation, which affects the part quality, microstructure, and properties of as-built specimens. These issues require a comprehensive understanding of the layerwise heat-accumulation-driven process–structure–property relationship in as-deposited samples. In this study, a systematic investigation was performed by fabricating three Ti-6Al-4V single-wall specimens with distinct interlayer delays, i.e., 0, 120, and 300 s. The real-time acquisition of high-fidelity thermal data and high-resolution melt pool images were utilized to demonstrate a direct correlation between layerwise heat accumulation and melt pool dimensions. The results revealed that the maximum heat buildup temperature of the topmost layer decreased from 660 °C to 263 °C with an increase to a 300 s interlayer delay, allowing for better control of the melt pool dimensions, which then resulted in improved part accuracy. Furthermore, the investigation of the location-specific composition, microstructure, and mechanical properties demonstrated that heat buildup resulted in the coarsening of microstructures and, consequently, the reduction of micro-hardness with increasing height. Extending the delay by 120 s resulted in a 5% improvement in the mechanical properties, including an increase in the yield strength from 817 MPa to 859 MPa and the ultimate tensile strength from 914 MPa to 959 MPa. Cooling rates estimated at 900 °C using a one-dimensional thermal model based on a numerical method allowed us to establish the process–structure–property relationship for the wall specimens. The study provides deeper insight into the effect of heat buildup in LHW-DED and serves as a guide for tailoring the properties of as-deposited specimens by regulating interlayer delay.

36 MATERIALS SCIENCE↗

One-step Ar/O{sub 2} thermal plasma processing of Y{sub 2}O{sub 3}:Eu{sup 3+} red phosphors: Phase structure, photoluminescent properties, and the effects of Sc{sup 3+} codoping

(Y{sub 0.95}Eu{sub 0.05}){sub 2}O{sub 3} red phosphors are synthesized in one step via Ar/O{sub 2} thermal plasma oxidation of atomized alcohol solutions of the component nitrates. Phase structure analysis found the direct products to be mixtures of a cubic and monoclinic phases, and the powder collected from the wall part of the plasma reactor as well as the finer portion of the total powder have significantly higher monoclinic contents ({approx}55 and 71 wt%, respectively). An almost pure-cubic structured phosphor powder can be converted from the phase mixture by annealing at a minimum temperature of 900 Degree-Sign C for 12 h, but at the expenses of significant coarsening/sintering of the nano-sized particles. It was first shown that codoping with 20 at% of Sc{sup 3+} may effectively retard crystallization of the undesired monoclinic phase and thus yield phosphor powders of high specific surface area ({approx}21.7 m{sup 2}/g) and significantly improved 611-nm red emission. Formation mechanism of the monoclinic phase and the effects of Sc{sup 3+} codoping on phase structure and luminescence properties were discussed. - Graphical abstract: Y{sub 2}O{sub 3}:Eu phosphors are synthesized in one-step via thermal plasma processing. The direct products are monoclinic and cubic phase mixtures, and Sc{sup 3+} codoping effectively suppresses crystallization of the undesired monoclinic phase to yield phosphor powders of high specific surface area and significantly improved photoluminescence. Highlights: Black-Right-Pointing-Pointer Thermal plasma processing yields Y{sub 2}O{sub 3}:Eu phosphors in one-step. Black-Right-Pointing-Pointer The direct products are monoclinic and cubic phase mixtures. Black-Right-Pointing-Pointer Sc{sup 3+} codoping effectively suppresses monoclinic crystallization. Black-Right-Pointing-Pointer Better luminescence is achieved via Sc{sup 3+} codoping.

36 MATERIALS SCIENCE↗

Nature of Interatomic Bonding in Controlling the Mechanical Properties of Calcium Silicate Hydrates

Calcium silicate hydrate (C–S–H) is the most important phase of hydrated cement gel which is the key material in construction industry. It is well accepted that hardened cement paste consists of either poorly crystalline or completely disordered phases. Although a myriad of speculative atomistic models of disordered C–S–H have been proposed, the fundamental basis of structure–property relationships remain elusive. This study focuses upon the correlations between mechanical properties and electronic structure based on well‐defined quantum mechanical parameters. We use 20 CSH minerals with known structure to gain fundamental understanding of structure–property relationship. The results indicate Si–O bond order density, which represents the cumulative bond strength of SiO bonds, has no direct correlation with bulk mechanical properties which is counterintuitive and against conventional wisdom. The variations are determined more precisely by the overall atomic and electronic structure dictated by bond order density of the Ca–O and hydrogen bonds ( HB ). Most importantly, there is a multifaceted balance between different types of interatomic bonds including the HB s in controlling mechanical properties. HB s categorized in relation to next nearest neighbor ( NNN ) enable us to identify specific types of HB s that are prevalent in CSH . In certain crystals such as suolunite, the HB network is organized in such a unique way that enhances its mechanical properties. The approach and findings presented in this paper points to a broad roadmap for the developing next‐generation cements.

Dharmawardhana, Chamila↗

Structure, thermodynamic properties, and phase diagrams of few colloids confined in a spherical pore

We study a system of few colloids confined in a small spherical cavity with event driven molecular dynamics simulations in the canonical ensemble. The colloidal particles interact through a short range square-well potential that takes into account the basic elements of attraction and excluded-volume repulsion of the interaction among colloids. We analyze the structural and thermodynamic properties of this few-body confined system in the framework of inhomogeneous fluids theory. Pair correlation function and density profile are used to determine the structure and the spatial characteristics of the system. Pressure on the walls, internal energy, and surface quantities such as surface tension and adsorption are also analyzed for a wide range of densities and temperatures. We have characterized systems from 2 to 6 confined particles, identifying distinctive qualitative behavior over the thermodynamic plane T − ρ, in a few-particle equivalent to phase diagrams of macroscopic systems. Applying the extended law of corresponding states, the square well interaction is mapped to the Asakura-Oosawa model for colloid-polymer mixtures. We link explicitly the temperature of the confined square-well fluid to the equivalent packing fraction of polymers in the Asakura-Oosawa model. Using this approach, we study the confined system of few colloids in a colloid-polymer mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Dynamics Simulation on the Effect of MgO/Al{sub 2}O{sub 3} Ratio on Structure and Properties of Blast Furnace Slag Under Different Basicity Conditions

The SiO{sub 2}-Al{sub 2}O{sub 3}-CaO-MgO is the basic structural system of blast furnace slag and the composition directly affects the performance of the slag. Molecular dynamics simulations were carried out to analyze the local structure, structural unit, bond angle, transport properties, and enthalpy of the slag with the increase of MgO/Al{sub 2}O{sub 3} mass ratio under different basicity conditions. It was found that the change of MgO/Al{sub 2}O{sub 3} ratio does not affect the short-range order structure, but it will reduce the overall stability of the network structure. Through the analysis of the structural unit of the slag, it was found that the polymerization degree of the system decreases with the increase of MgO/Al{sub 2}O{sub 3} ratio, indicating that the complex network structure of the system is partially depolymerized. Besides, the self-diffusion coefficients of each ion were concluded and the magnitudes were observed to be in the following order: Mg{sup 2+}>Ca{sup 2+}>Al{sup 3+}>O{sup 2-}>Si{sup 4+}. The diffusivity of the slag increases with the increase of MgO/Al{sub 2}O{sub 3} ratio and the corresponding viscosity decreases. And the enthalpy of the slag is increased with the increase of MgO/Al{sub 2}O{sub 3} ratio or basicity, therefore the fuel consumption should also be properly adjusted during the operation of blast furnace to ensure the target temperature.

36 MATERIALS SCIENCE↗

Crystal and electronic structures, luminescence properties of Eu{sup 2+}-doped Si{sub 6-z}Al{sub z}O{sub z}N{sub 8-z} and M{sub y}Si{sub 6-z}Al{sub z-y}O{sub z+y}N{sub 8-z-y} (M=2Li, Mg, Ca, Sr, Ba)

The crystal structure, electronic structure, and photoluminescence properties of Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} (x=0-0.1, 0<z<1) and Eu{sub x}M{sub y}Si{sub 6-z}Al{sub z-x-y}O{sub z+x+y}N{sub 8-z-x-y} (M=2Li, Mg, Ca, Sr, Ba) have been studied. Single-phase Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} can be obtained in very narrow ranges of x{<=}0.06 (z=0.15) and z<0.5 (x=0.3), indicating that limited Eu{sup 2+} ions can be incorporated into nitrogen-rich Si{sub 6-z}Al{sub z}O{sub z}N{sub 8-z}. The Eu{sup 2+} ion is found to occupy the 2b site in a hexagonal unit cell (P6{sub 3}/m) and directly connected by six adjacent nitrogen/oxygen atoms ranging 2.4850-2.5089 A. The calculated host band gaps by the relativistic DV-X{alpha} method are about 5.55 and 5.45 eV (without Eu{sup 2+} 4f5d levels) for x=0 and 0.013 in Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} (z=0.15), in which the top of the 5d orbitals overlap with the Si-3s3p and N-2p orbitals within the bottom of the conduction band of the host. Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} shows a strong green emission with a broad Eu{sup 2+} band centered at about 530 nm under UV to near-UV excitation range. The excitation and emission spectra are hardly modified by Eu concentration and dual-doping ions of Li and other alkaline-earth ions with Eu. Higher Eu concentrations can significantly quench the luminescence of Eu{sup 2+} and decrease the thermal quenching temperature. In addition, the emission spectrum can only be slightly tuned to the longer wavelengths ({approx}529-545 nm) by increasing z within the solid solution range of z<0.5. Furthermore, the luminescence intensity of Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} can be improved by increasing z and the dual-doping of Li and Ba. - Graphical abstract: Excitation and emission spectra of Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} with the project of a 2x2x2 supercell crystal structure viewed along (001), in which red spheres are the Eu atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Structure, and Properties of the Complex Zintl Phase Eu 9 Zn 4.5 As 9 : A Candidate Topological Insulator and Thermoelectric Material

Reported are the synthesis and detailed analysis of the crystal and electronic structure of the novel Zintl phase Eu 9 Zn 4.5 As 9 . This material was identified in the densely populated Eu–Zn–As compositional space. For structure determination and for property measurements, suitable single crystals of this compound were grown from either Sn- or Pb-flux. Single-crystal X-ray diffraction methods indicate that Eu 9 Zn 4.5 As 9 crystallizes in the orthorhombic crystal system with the space group Pnma (a = 12.1953(7) Å, b = 4.3730(2) Å, c = 42.674(2) Å) and is formally isostructural to Ca 9 Mn 4+x Sb 9 , the less common “9–4–9” type. The structure is heavily disordered, with multiple partially occupied sites, yet, according to the Zintl-Klemm formalism, a charge-balanced composition (Eu 2+ ) 9 (Zn 2+ ) 4.5 (As 3− ) 9 is attained. Electronic structure calculations for a model, disorder-free structure indicate no energy gap between the valence and the conduction bands and suggest (semi)metallic behavior. Preliminary susceptibility measurements confirm the expected divalent nature of Eu 2+ ([Xe] 4 f 7 ground state).

Zintl phases↗

On codes with multi-level error-correction capabilities

In conventional coding for error control, all the information symbols of a message are regarded equally significant, and hence codes are devised to provide equal protection for each information symbol against channel errors. However, in some occasions, some information symbols in a message are more significant than the other symbols. As a result, it is desired to devise codes with multilevel error-correcting capabilities. Another situation where codes with multi-level error-correcting capabilities are desired is in broadcast communication systems. An m-user broadcast channel has one input and m outputs. The single input and each output form a component channel. The component channels may have different noise levels, and hence the messages transmitted over the component channels require different levels of protection against errors. Block codes with multi-level error-correcting capabilities are also known as unequal error protection (UEP) codes. Structural properties of these codes are derived. Based on these structural properties, two classes of UEP codes are constructed.

Lin, Shu↗

Structural and Electrocatalytic Properties of PtIrCo/C Catalysts for Oxygen Reduction Reaction

This paper describes the results of an investigation of the synthesis of PtIrCo nanoparticles (2-3 nm) for electrocatalytic oxygen reduction reaction. The carbon-supported PtIrCo catalysts (PtIrCo/C) were thermally treated at temperatures ranging from 400 to 900 C. The size, composition, and atomic-scale structures of the PtIrCo/C catalysts were characterized for establishing their correlation with the electrocatalytic activity toward oxygen reduction reaction. The specific activity was found to increase by a factor of 3-5 for the PtIrCo/C catalysts in comparison with Pt/C catalysts. A correlation was identified between the specific activity and the nanoparticle's fcc-type lattice parameter. The specific activity increases whereas the fcc-type lattice parameter decreases with the thermal treatment temperature. This correlation was further substantiated by analyzing the interatomic spatial parameters in the trimetallic nanoparticles based on X-ray absorption fine structure spectroscopic and high-energy XRD experiments. Implications of these findings, along with the durability of the catalysts, to the design of active electrocatalysts were also discussed.

Loukrakpam, Rameshwori↗

Computer modeling of the local structure, mixing properties, and stability of solid solutions of alkaline-earth metal oxides

A technique for the computer modeling of disordered binary oxide solid solutions MO-M'O in a wide composition range has been developed. The method of atomistic pair potentials was used for 4 x 4 x 4 supercells. The parameters of the potentials are optimized using the structural and elastic properties of pure components MgO, CaO, SrO, and BaO. The temperature dependences of the heat capacity and entropy are calculated for pure components. The excess mixing properties (enthalpy, volume, bulk modulus, vibrational entropy) are found for different compositions of Mg{sub x}Ca{sub (1-x)}O, Ca{sub x}Sr{sub (1-x)}O, and Sr{sub x}Ba{sub (1-x)}O solid solutions. Temperature and composition dependences of the excess Gibbs energy were constructed, which made it possible to approximately estimate the critical decomposition temperatures and limits of component miscibility. Statistical analysis of lattice distortions in the first and second coordination spheres reveals a detailed picture of the solid-solution local structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles studies of Ni-Ta intermetallic compounds

The structural properties, heats of formation, elastic properties, and electronic structures of Ni-Ta intermetallic compounds are investigated in detail based on density functional theory. Our results indicate that all Ni-Ta intermetallic compounds calculated here are mechanically stable except for P21/m-Ni{sub 3}Ta and hc-NiTa{sub 2}. Furthermore, we found that Pmmn-Ni{sub 3}Ta is the ground state stable phase of Ni{sub 3}Ta polymorphs. The polycrystalline elastic modulus has been deduced by using the Voigt-Reuss-Hill approximation. All Ni-Ta intermetallic compounds in our study, except for NiTa, are ductile materials by corresponding G/K values and poisson's ratio. The calculated heats of formation demonstrated that Ni{sub 2}Ta are thermodynamically unstable. Our results also indicated that all Ni-Ta intermetallic compounds analyzed here are conductors. The density of state demonstrated the structure stability increases with the Ta concentration. - Graphical abstract: Mechanical properties and formation heats of Ni-Ta intermetallic compounds are discussed in detail in this paper. Highlights: Black-Right-Pointing-Pointer Ni-Ta intermetallic compounds are investigated by first principle calculations. Black-Right-Pointing-Pointer P21/m-Ni{sub 3}Ta and hc-NiTa{sub 2} are mechanically unstable phases. Black-Right-Pointing-Pointer Pmmn-Ni{sub 3}Ta is ground stable phase of Ni{sub 3}Ta polymorphs. Black-Right-Pointing-Pointer All Ni-Ta intermetallic compounds are conducting materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure, magnetic properties, and exchange splitting of gadolinium intermetallics

Here, we report here the electronic structure calculations of the magnetic moment, magneto-crystalline anisotropy energy (MAE), and density of states (DOS) of Gd-metal, GdAl 2 , GdAl 3 , GdCo 2 , GdCo 3 , and GdCo 5 . From the DOS, the exchange splitting energy is derived to map ferrimagnetic to paramagnetic phase transition (Curie temperature, T C ). The employed theoretical method here is based on advanced density functional theory, specifically the linearized augmented plane wave method (LAPW) within the local spin density approximation (LSDA), including spin–orbit coupling (SOC) and Hubbard model parameter (U). DOS analysis of both Gd-Al and Gd-Co systems reveals a strong correlation between exchange splitting energy and T C . The Gd-Co system exhibits an enormous exchange splitting energy among Co-3d electrons, vastly overwhelming the vanishing Gd 5d exchange splitting. Finally, these findings suggest that exchange splitting of Co-3d electrons plays a key role in the ground state magnetism and magnetic transition temperatures in these materials.

36 MATERIALS SCIENCE↗

Electronic structures, elastic properties, and minimum thermal conductivities of cermet M{sub 3}AlN

The electronic structures and elastic anisotropies of cubic Ti{sub 3}AlN, Zr{sub 3}AlN, and Hf{sub 3}AlN are investigated by pseudopotential plane-wave method based on density functional theory. At the Fermi level, the electronic structures of these compounds are successive with no energy gap between conduct and valence bands, and exhibit metallicity in ground states. In valence band of each partial density of states, the different orbital electrons indicate interaction of corresponding atoms. In addition, the anisotropy of Hf{sub 3}AlN is found to be significantly different from that of Ti{sub 3}AlN and Zr{sub 3}AlN, which involve the differences in the bonding strength. It is notable that Hf{sub 3}AlN is a desired thermal barrier material with the lowest thermal conductivity at high temperature among the three compounds. - Graphical abstract: 1.Young's moduli of anti-perovskite Ti{sub 3}AlN, Zr{sub 3}AlN, and Hf{sub 3}AlN in full space. 2.Electron density differences on crystal planes (1 0 0), (2 0 0), and (1 1 0) of anti-perovskite Zr{sub 3}AlN. - Highlights: • We calculated three anti-perovskite cermets with first-principles theory. • We illustrated 3D Young modulus and found the anomalous anisotropy. • We explained the anomaly and calculated the minimum thermal conductivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Properties of Nanostructured YBa{sub 2}Cu{sub 3}O{sub 7–δ}, BiFeO{sub 3}, and Fe{sub 3}O{sub 4}

The development of new nanostructured materials based on YBa{sub 2}Cu{sub 3}O{sub 7–δ}, BiFeO{sub 3}, and Fe{sub 3}O{sub 4} compounds is considered. The structure, morphology, and properties of these materials are studied. The possibilities of fabricating YBa{sub 2}Cu{sub 3}O{sub 7–δ} ceramics with given densities from nanopowders in a single stage by an energy efficient method and growing superconducting films of the same composition on a silicon substrate (on a SiO{sub 2} layer) are demonstrated. The technique for fabricating BiFeO{sub 3} nanopowder, making it possible to obtain nanostructured ceramics without additional accompanied phases commonly forming during BiFeO{sub 3} synthesis is developed. Two methods of the single-stage synthesis of Fe{sub 3}O{sub 4} nanopowder are presented: burning of nitrate-organic precursors and the electrochemical three-electrode method in which one of the electrodes, i.e., an anode containing scrap iron and slurry, is used as an expendable material.

36 MATERIALS SCIENCE↗