Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Projecting future climate change impacts on heat-related mortality in large urban areas in China

Highlights: • The study projects future heat-related mortality risk in 51 major cities in China. • The projections are based on high resolution climate and population projections. • Future heat mortality risk is likely to be considerable under all emission scenarios. • Climate mitigation and heat risk management are needed to reduce such risk. Global climate change is anticipated to raise overall temperatures and has the potential to increase future mortality attributable to heat. Urban areas are particularly vulnerable to heat because of high concentrations of susceptible people. As the world's largest developing country, China has experienced noticeable changes in climate, partially evidenced by frequent occurrence of extreme heat in urban areas, which could expose millions of residents to summer heat stress that may result in increased health risk, including mortality. While there is a growing literature on future impacts of extreme temperatures on public health, projecting changes in future health outcomes associated with climate warming remains challenging and underexplored, particularly in developing countries. This is an exploratory study aimed at projecting future heat-related mortality risk in major urban areas in China. We focus on the 51 largest Chinese cities that include about one third of the total population in China, and project the potential changes in heat-related mortality based on 19 different global-scale climate models and three Representative Concentration Pathways (RCPs). City-specific risk estimates for high temperature and all-cause mortality were used to estimate annual heat-related mortality over two future twenty-year time periods. We estimated that for the 20-year period in Mid-21st century (2041–2060) relative to 1970–2000, incidence of excess heat-related mortality in the 51 cities to be approximately 37,800 (95% CI: 31,300–43,500), 31,700 (95% CI: 26,200–36,600) and 25,800 (95% CI: 21,300–29,800) deaths per year under RCP8.5, RCP4.5 and RCP2.6, respectively. Slowing climate change through the most stringent emission control scenario RCP2.6, relative to RCP8.5, was estimated to avoid 12,900 (95% CI: 10,800–14,800) deaths per year in the 51 cities in the 2050s, and 35,100 (95% CI: 29,200–40,100) deaths per year in the 2070s. The highest mortality risk is primarily in cities located in the North, East and Central regions of China. Population adaptation to heat is likely to reduce excess heat mortality, but the extent of adaptation is still unclear. Future heat mortality risk attributable to exposure to elevated warm season temperature is likely to be considerable in China's urban centers, with substantial geographic variations. Climate mitigation and heat risk management are needed to reduce such risk and produce substantial public health benefits.

54 ENVIRONMENTAL SCIENCES↗

Lifetime of the phonons in the PLT ceramic

The lifetimes at higher temperatures on lanthanum-modified lead titanate (PLT) are mainly due to the anharmonic decay of optical phonons into low-energy phonons. The temperature-independent contributions from inherent crystal defects and from boundary scattering become comparable to the phonon scattering contribution at lower temperatures. The thermal interaction is large at higher temperatures which decreases the phonon mean free path, and so the decay lifetime decreases as the temperature of the system is increased. This leads to the increased line width at higher temperatures. We made an estimate of the lifetimes for different concentrations and temperatures in PLT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Paleoatmospheric temperature structure

Radiative equilibrium and radiative convective temperature profiles for the earth's evolving atmosphere have been calculated. If the atmosphere evolved from one rich in carbon dioxide, and deficient in oxygen, to its present composition, the temperature structure showed considerable change. The models of 3 to 4 billion years ago display steadily decreasing temperatures with altitude, being 185 K at pressures associated with the present-day upper stratosphere. A lapse rate feature similar to the present-day tropopause is not indicated until about 1 billion years ago; but the stratospheric region is approximately 15 K colder than presently found at comparable pressures. Surface temperatures approximately 10 K warmer than at present existed until nearly 1 billion years ago. When the oxygen content exceeded roughly 0.1 times the present level, surface temperatures began to decrease. If biological processes are important to carbon dioxide - ozone variations, such as has been suggested during the Ice Ages, then estimates of surface temperature should include the effects of both gases.

Morss, D. A.↗

Microwave radiometer measurement of water vapor path delay: Data reduction techniques

Data reduction techniques are developed to compensate for water vapor path delay, a limiting error source in geodetic measurements made with very long baseline interferometry and in radio ranging to spacecraft. It is shown that water vapor path delay is proportional to a linear combination of saturation-corrected sky brightness temperatures, measured on and off the water vapor line. The effects of emission from liquid water droplets in clouds as well as most of the oxygen emission are removed by the off-line channel. Sky brightness temperatures are saturation-corrected or 'linearized' using estimates of effective sky temperatures made from surface temperature. Tipping curves are used to remove instrumental error. Coefficients are found by two methods: from a regression analysis of measured brightness temperatures versus radiosonde measured delay, and from a regression analysis of theoretical brightness temperatures versus radiosonde measured delay. In each case the coefficients are adjusted for differing climatic conditions by measurements of surface temperature, pressure, and relative humidity. Regression solutions are constrained to remove liquid water contributions and to give the correct slope for radiometer versus radiosonde path delay.

Claflin, E. S.↗

Are solar spectral variations a drive for climatic change

The effects of UV variations on atmospheric ozone content and climate for time scales encompassing the 27-day solar rotation period, the sunspot period, twice the solar magnetic, and also longer time periods are examined. The studies of the relationship between solar UV variations, atmospheric ozone content and atmospheric temperatures were conducted by estimating the impact of such variations on tropospheric temperature. The total luminosity constant is then held and the dependence of the ozone variations on the forcing period is calculated. It is concluded that solar UV variations on time scales of weeks to months occasionally perturb total ozone and stratospheric temperatures by noticeable amounts but result in only minor changes in the troposphere.

Pollack, J. R.↗

Radiometric analysis of the longwave infrared channel of the Thematic Mapper on LANDSAT 4 and 5

The first objective was to evaluate the postlaunch radiometric calibration of the LANDSAT Thematic Mapper (TM) band 6 data. The second objective was to determine to what extent surface temperatures could be computed from the TM and 6 data using atmospheric propagation models. To accomplish this, ground truth data were compared to a single TM-4 band 6 data set. This comparison indicated satisfactory agreement over a narrow temperature range. The atmospheric propagation model (modified LOWTRAN 5A) was used to predict surface temperature values based on the radiance at the spacecraft. The aircraft data were calibrated using a multi-altitude profile calibration technique which had been extensively tested in previous studies. This aircraft calibration permitted measurement of surface temperatures based on the radiance reaching the aircraft. When these temperature values are evaluated, an error in the satellite's ability to predict surface temperatures can be estimated. This study indicated that by carefully accounting for various sensor calibration and atmospheric propagation effects, and expected error (1 standard deviation) in surface temperature would be 0.9 K. This assumes no error in surface emissivity and no sampling error due to target location. These results indicate that the satellite calibration is within nominal limits to within this study's ability to measure error.

Schott, John R.↗

High temperature furnace modeling and performance verifications

Analytical, numerical, and experimental studies were performed on two classes of high temperature materials processing sources for their potential use as directional solidification furnaces. The research concentrated on a commercially available high temperature furnace using a zirconia ceramic tube as the heating element and an Arc Furnace based on a tube welder. The first objective was to assemble the zirconia furnace and construct parts needed to successfully perform experiments. The 2nd objective was to evaluate the zirconia furnace performance as a directional solidification furnace element. The 3rd objective was to establish a data base on materials used in the furnace construction, with particular emphasis on emissivities, transmissivities, and absorptivities as functions of wavelength and temperature. A 1-D and 2-D spectral radiation heat transfer model was developed for comparison with standard modeling techniques, and were used to predict wall and crucible temperatures. The 4th objective addressed the development of a SINDA model for the Arc Furnace and was used to design sample holders and to estimate cooling media temperatures for the steady state operation of the furnace. And, the 5th objective addressed the initial performance evaluation of the Arc Furnace and associated equipment for directional solidification. Results of these objectives are presented.

Smith, James E., Jr.↗

Temperature prediction of space flight experiments by computer thermal analysis

Life sciences experiments are especially sensitive to temperature. A small temperature difference between otherwise identical samples can cause various differences in biological reaction rates. Knowledge of experimental temperatures and temperature histories help to distinguish the effects of microgravity and temperature on spaceflight experiments compared to ground based studies, and allow appropriate controls and sensitivity tests. Up to the present time, the Orbiter (Space Shuttle) has not generally provided temperature measurement instrumentation inside ambient lockers located in the Mid-deck of the Orbiter, or inside similar facilities such as Spacehab and Spacelab, but many pieces of hardware do have temperature recording capability. Most of these temperatures, however, have only been roughly measured or estimated. Such reported experimental temperatures, while accurate within a range of several degrees Celsius, are of limited utility to biological researchers. The temperature controlled lockers used in spaceflight, such as Commerical-Refrigeration Incubation Modules (C-R/IMs), severely reduce the mass and volume available for test samples and do not necessarily provide uniform thermal environments. While these test carriers avoid some of the experimental temperature variations of the ambient lockers, the number of samples which can be accommodated in these temperature controlled units is limited. In the present work, improved models of thermal prediction and control were sought. Temperatures are predicted by thermal analysis software using empirical temperatures recorded during STS-57. These temperatures are compared to data recorded throughout the mission using Ambient Temperature Recorders (ATRs) located within several payload lockers. Additional test cases are undertaken using controlled ground experiments to more precisely determine the reliability of the thermal model. The approach presented should increase the utility of various spaceflight carriers in the support of biological and material science research and ground control studies done in preparation for flight.

Birdsong, M. B.↗

Update on Earth Skin Temperature Monitoring From 16 Years of IASI Satellite Observations

Surface parameters such as emissivity and skin temperature have been retrieved from IASI measurements of last 16 years. Monthly and spatially gridded surface skin temperature is produced to show the phenomena of its natural variability, which is also reflected in the surface emissivity and/or soil moisture content derived from the same time series of measurements. The anomalies of surface skin temperature are used to estimate its trend. The IASI global surface skin temperature trend is comparable with the NASA GISTEMP5 global surface air temperature trend. The trend of IASI global surface skin temperature reports that an approximate 0.027 K/yr. increase has evolved during 2007–2023. Attention has been given to the arctic region where an average warming rate is near 3 times higher than the global average. In some arctic regions, the rapid warming rate has reached 0.2-0.3 K/yr. which is about 10 times higher than the global average. Geophysical distribution of the surface temperature trend in the arctic region is emphasized and reported.

Global warming↗

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs: Preprint

Subsurface data analysis, reservoir modeling, and machine learning (ML) techniques have been applied to the Brady Hot Springs (BHS) geothermal field in Nevada, USA to further characterize the subsurface and assist with optimizing reservoir management. Hundreds of reservoir simulations have been conducted in TETRAD-G and CMG STARS to explore different injection and production fluid flow rates and allocations and to develop a training data set for ML. This process included simulating the historical injection and production since 1979 and prediction of future performance through 2040. ML networks were created and trained using TensorFlow based on multilayer perceptron (MLP), long short-term memory (LSTM), and convolutional neural network (CNN) architectures. These networks took as input selected flow rates, injection temperatures, and historical field operation data and produced estimates of future production temperatures. This approach was first successfully tested on a simplified single fracture doublet system, followed by the application to the BHS reservoir. Using an initial BHS dataset with 37 simulated scenarios, the trained and validated network predicted the production temperature for 6 production wells with the mean absolute percentage error of less than 8%. In a complementary analysis effort, the principal component analysis applied to 13 BHS geological parameters revealed that vertical fracture permeability shows the strongest correlation with fault density and fault intersection density. A new BHS reservoir model was developed considering the fault intersection density as proxy for permeability. This new reservoir model helps to explore under-exploited zones in the reservoir. A data gathering plan to obtain additional subsurface data was developed; it includes temperature surveying for three idle injection wells, at which the reservoir simulations indicate high bottom-hole temperatures. The collected data assist with calibrating the reservoir model and may lead to converting these wells to producers to access under-exploited zones in the reservoir. Data gathering activities are planned for the first quarter of 2021.

40 EE - Geothermal Technologies Office (EE-4G)↗

Assessment of Failure Mechanisms for GFR Vented Fuel Pins Using Hexoloy Cladding

A near-term vented fuel pin concept as a back-up option for the gas-cooled fast reactor (GFR) system was evaluated. This work explored the feasibility of using mixed carbide fuel (U0.85P0.15)C with off-the-shelf monolithic SiC clad in order to meet requirements for GFR fuel with an average burnup of 10%. The stress loading on the SiC cladding due to fuel swelling and thermal stress due to temperature gradient were estimated based on the data from the development of carbide fuels in the 1970’s-1980’s and the materials properties for SiC tubes. The fuel swelling at the goal burnup (10%) is expected to produce a hoop stress of approximately 32 MPa in cladding, approaching the estimated maximum allowable hoop stress (~33 MPa) for a SiC cladding reliability of 99.99%. The estimated tensile thermal stress component (~121 MPa) near the outer surface of a monolithic SiC cladding is likely to limit its application at high temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A first look at atmospheric dynamics and temperature variations on Titan.

Pollack (1973) has used a radiative equilibrium model to match radiometric data for Titan and infers the atmospheric mass, composition, opacity, and gross vertical thermal structure. These results are used to estimate the atmospheric temperature variations by means of scaling analysis, taking into account dynamics both for a baroclinic wave regime and for an axially symmetric circulation regime. Horizontal temperature variations of the atmosphere and surface are found to be very small, and the circulation is found to be weak and probably axially symmetric. The small temperature variations appear to preclude the storage of volatiles in polar caps, so that the present atmospheric methane content may be due to a balance between outgassing and photodissociation.

Leovy, C. B.↗

Predictive modeling of Néel temperature in austenitic alloys using CALPHAD and data analytics

The Néel temperature is a crucial yet often overlooked parameter in calculating the stacking fault energy (SFE) of austenitic alloys. Several empirical equations have been proposed to estimate the Néel temperature of austenitic alloys, which are then used to calculate the SFE and explain deformation mechanisms. However, these empirical equations, typically derived using linear regression algorithms, are often simplistic and may fail to capture the complex interactions among multiple alloying elements that influence the Néel temperature. Moreover, their applicability is usually limited to specific compositional ranges. In this study, we propose a CALPHAD based approach and develop a surrogate decision tree based regression model capable of capturing the interactions among multiple alloying elements to predict the Néel temperature. Predictions from both the CALPHAD approach and the regression model show close agreement with experimental measurements reported in the literature. In conclusion, the implications of accurate Néel temperature predictions on the calculated SFE and deformation mechanisms are also discussed.

36 MATERIALS SCIENCE↗

DETERMINATION OF SUB-RESOLUTION STRUCTURE OF A JET BY SOLAR MAGNETOSEISMOLOGY

A thin dark thread is observed in a UV/EUV solar jet in the 171 A, 193 A, and 211 A, and partially in 304 A. The dark thread appears to originate in the chromosphere but its temperature does not appear to lie within the passbands of the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory. We therefore implement solar magnetoseismology to estimate the plasma parameters of the dark thread. A propagating kink (transverse) wave is observed to travel along the dark thread. The wave is tracked over a range of {approx}7000 km by placing multiple slits along the axis of the dark thread. The phase speed and amplitude of the wave are estimated and magnetoseismological theory is employed to determine the plasma parameters. We are able to estimate the plasma temperature, density gradient, magnetic field gradient, and sub-resolution expansion of the dark thread. The dark thread is found to be cool, T {approx}< 3 Multiplication-Sign 10{sup 4}, with both strong density and magnetic field gradients. The expansion of the flux tube along its length is {approx}300-400 km.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimal Use of Data in Parallel Tempering Simulations for the Construction of Discrete-State Markov Models of Biomolecular Dynamics

Parallel tempering (PT) molecular dynamics simulations have been extensively investigated as a means of efficient sampling of the configurations of biomolecular systems. Recent work has demonstrated how the short physical trajectories generated in PT simulations of biomolecules can be used to construct the Markov models describing biomolecular dynamics at each simulated temperature. While this approach describes the temperature-dependent kinetics, it does not make optimal use of all available PT data, instead estimating the rates at a given temperature using only data from that temperature. This can be problematic, as some relevant transitions or states may not be sufficiently sampled at the temperature of interest, but might be readily sampled at nearby temperatures. Further, the comparison of temperature-dependent properties can suffer from the false assumption that data collected from different temperatures are uncorrelated. We propose here a strategy in which, by a simple modification of the PT protocol, the harvested trajectories can be reweighted, permitting data from all temperatures to contribute to the estimated kinetic model. The method reduces the statistical uncertainty in the kinetic model relative to the single temperature approach and provides estimates of transition probabilities even for transitions not observed at the temperature of interest. Further, the method allows the kinetics to be estimated at temperatures other than those at which simulations were run. We illustrate this method by applying it to the generation of a Markov model of the conformational dynamics of the solvated terminally blocked alanine peptide.

59 BASIC BIOLOGICAL SCIENCES↗

Remote sensing of seasonal and annual variation of equatorial new production: A model for global estimates

Sea-surface temperatures (SSTs) are strongly correlated with surface nitrate concentrations in coastal upwelling regions. Upwelling also occurs in the equatorial Pacific; correlations between temperature and nitrate concentration are strong. The University of Miami weekly averaged Advanced Very High Resolution Radiometer (AVHRR) SST data for October 1986 through June 1989 have been used to compute surface nitrate concentrations from 90 deg - 180 deg W and from 15 deg S - 15 deg N. The surface areas with nitrate above detection limits are combined with existing nitrate uptake data to give weekly estimates of equatorial new production.

Dugdale, R.↗

Remote Sensing of Seasonal and Annual Variation of Equatorial New Production: A Model for Global Estimates

Sea-surface temperatures (SSTs) are strongly correlated with surface nitrate concentrations in coastal upwelling regions. Upwelling also occurs in the equatorial Pacific; correlations between temperature and nitrate concentration are strong. The University of Miami weekly averaged Advanced Very High Resolution Radiometer (AVHRR) SST data for October 1986 through June 1989 have been used to compute surface nitrate concentrations from 90 deg - 180 deg W and from 15 deg S - 15 deg N. The surface areas with nitrate above detection limits are combined with existing nitrate uptake data to give weekly estimates of equatorial new production.

Barder, R.↗

Exploring Alternative Non-contact temperature measurements for 99 Mo production facility NorthStar FY14 Activity 5, Deliverable 2

We have conducted an experiment to explore an alternative non-contact method of measuring the Inconel target window temperature. This experiment involves using a standard color camera to observe the visible light emitted from the Inconel target window at high heat in order to estimate the window temperature. The safety limit to prevent target window failure is 700 °C and therefore we need a reliable and accurate method of measuring temperature especially in the range of 600 °C to 700 °C if it is to replace the IR camera. In this temperature range the window will emit a significant amount of black body radiation within the visible range and hence the idea of using a color camera. The goal is to see if the shift in window color (determined by the RBG pixel values of the camera) as the target window is heated to 700 °C can be calibrated to the temperature.The reasons for exploring this as an alternative to an IR are camera are: significant cost reduction and potentially less complicated to calibrate.

42 ENGINEERING↗