Search NASA⌕ Search

SEARCH · Search NASA

Results for “Unity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

The waiting point approximation in R-process calculations

The steady flow approximation to the r-process has been used to evaluate the validity of the waiting point assumption (that, for a given charge number Z, neutron captures become balanced by neutron photodisintegrations) under a variety of conditions. The criterion for the accuracy of the approximation for any set of nuclei with the same value of Z is that the ratio of the total rate of neutron photodisintegration in those nuclei to the total rate of neutron captures should be close to unity. No set of conditions involving neutron production by helium thermonuclear reactions (at temperatures up to 10 to the 9th K) could be found for which the waiting point approximation is useful for all values of Z, and it is recommended that all such r-process calculations not use this approximation. At higher temperatures, such as those characteristic of explosive carbon burning (2 x 10 to the 9th K), the waiting point approximation is much better.

Cameron, A. G. W.↗

Amalthea - Implications of the temperature observed by Voyager

The temperature profile of Amalthea's surface layer is modeled as a function of location and time of day, assuming a triaxial ellipsoid shape and thermal properties similar to those of the lunar soil. Although the major heat source is direct insolation, temperatures are slightly increased by thermal radiation from Jupiter, sunlight reflected from the planet, and charged particle bombardment. Possible sources of error in the model are discussed in detail, including satellite shape effects, unusually low emissivity, uncommonly rough surface, abnormal thermal inertia, charged particle flux variability, and Joule heating. Voyager 1 IRIS observations suggest that the Amalthean surface has an emissivity near unity, but cannot put any useful limits on the thermal inertia of the Amalthean surface layer.

Simonelli, D. P.↗

Nitridation of Si(111) by nitrogen atoms. II

The reaction between Si(111) and nitrogen atoms has been investigated by LEED, Auger, and electron energy loss (ELS) techniques. The early stage of the reaction at 850-1050 C involves the formation of a chemically reacted monolayer which grows in islands. The sticking coefficient for the submonolayer is estimated to be of the order of unity. Two electronically different surface structures can be formed during these stages, yielding the '8 x 8' and the quadruplet LEED patterns; the quadruplet unit cell is the one with the highest nitrogen density. A pure quadruplet structure is obtained from samples with a carbon contamination of the Si monolayer of about 5 pct. During the multilayer stages, the influence of the substrate is not as important, and the reactions at 850 C and above produce quadruplet-like local structures.

Schrott, A. G.↗

Correlating downward flame spread rates for thick fuel beds

Flame spread rates are presented for polymethylmethacrylate fuel beds as a function of gravitational acceleration and ambient pressure and oxygen concentration. The data are correlated by plotting a dimensionless spread rate that is a measure of the heat transferred forward of the flame, required to sustain the flame, compared to the maximum possible forward heat transfer against a Damkoehler number. The latter parameter indicates the approach of the flame to its maximum temperature, where the maximum possible forward heat transfer occurs, such that the dimensionless spread rate approaches unity at large Damkoehler number. Surface regression effects on the flame spread process are incorporated into the dimensionless spread rate, and the final correlation is independent of bed thickness.

Altenkirch, R. A.↗

Multiple-gridding of the Euler equations with an implicit scheme

The multiple-grid scheme of Ni (1981) for the solution of the unsteady Euler equations for quasi-one-dimensional transonic flow problems is analyzed according to its ability to accelerate convergence to a steady state solution, its applicability to an implicit scheme, its accuracy, and its stability limits. This scheme is applied successfully to McCormack's (1981) implicit method of solving quasi-one-dimensional transonic flow problems for CFL numbers significantly greater than unity. It is determined that the second order accuracy of this implicit method is preserved by employing the multiple gridding. However, stability limitations that are flow dependent are introduced into the implicit method by the use of the multiple-grid scheme which will curtail its use under certain flow conditions. A scaling modification for the multiple grid scheme is developed which further improves its performance when used with explicit and artificially-damped implicit methods without any increase in computational work.

Stubbs, R. M.↗

Perturbed particle disks

The velocity ellipsoid in a particle disk near an isolated satellite resonance is determined by solving the Boltzmann moment equations, and solutions are obtained that are stationary functions of the azimuthal angle in a coordinate frame which rotates with the pattern speed of the perturbation potential. The magnitude of the deformation rate tensor in a perturbed particle disk is bounded from above by an expression which includes the orbital angular velocity, the optical depth, and a dimensionless constant of order unity. It is also found that, in sufficiently perturbed regions, there are ranges of azimuthal angle over which the radial component of the angular momentum flux is negative. It is also possible for the angular momentum luminosity to be negative. These results are pertinent to the understanding of sharp edges and density wave decay in planetary rings.

Borderies, N.↗

Bubble motion in a rotating liquid body

The behavior of a single gas bubble inside a rotating liquid-filled sphere has been investigated analytically and experimentally as part of ground-based investigations aimed at aiding in the design and interpretation of Shuttle experiments. In the analysis, a quasi-static description of the motion of a bubble was developed in the limit of small values of the Taylor number. A series of rotation experiments using air bubbles and silicone oils were designed to match the conditions specified in the analysis, i.e., the bubble size, sphere rotation rate, and liquid kinematic viscosity were chosen such that the Taylor number was much less than unity. The analytical description predicts the bubble velocity and its asymptotic location. It is shown that the asymptotic position is removed from the axis of rotation.

Annamalai, P.↗

Relative quantum yield of I-asterisk(2P1/2) in the tunable laser UV photodissociation of i-C3F7I and n-C3F7I - Effect of temperature and exciplex emission

Wavelength-specific relative quantum yields of metastable I from pulsed laser photodissociation of i-C3F7I and n-C3F7I in the range 265-336 nm are determined by measuring the time-resolved infrared emission from the atomic I(P-2(1/2) P-2(3/2) transition. It is shown that although this yield appears to be unity from 265 to 298 nm, it decreases dramatically at longer wavelengths. Values are also reported for the enhancement of emission from metastable I due to exciplex formation at several temperatures. The exciplex formation emission increases linearly with parent gas pressure, but decreases with increasing temperature. Absorption spectra of i- and n-C3F7I between 303 and 497 K are presented, and the effect of temperature on the quantum yields at selected wavelengths greater than 300 nm, where increasing the temperature enhances the absorption considerably, are given. The results are discussed in regard to the development of solar-pumped iodine lasers.

Smedley, J. E.↗

Heat transfer characteristics for jet array impingement with initial crossflow

Two-dimensional arrays of circular air jets impinging on a heat transfer surface parallel to the jet orifice plate are considered. The jet flow, after impingement, is constrained to exit in a single direction along the channel formed by the jet orifice plate and the heat transfer surface. In addition to the crossflow which originates from the jets following impingement, an initial crossflow is present which approaches the array through an upstream extension of the channel. The temperature of the initial crossflow air may differ from the jet air temperature. The configurations considered are intended to model the impingement cooled midchord region of gas turbine airfoils in cases where an initial crossflow is also present. Nusselt numbers and dimensionless adiabatic wall temperatures resolved to one streamwise jet hole spacing were experimentally determined for ratios of the initial crossflow rate to the total jet flow rate ranging from zero to unity. These are presented and discussed relative to the flow and geometric parameters.

Florschuetz, L. W.↗

The dynamics of elliptical rings

The paper investigates the evolution of eccentric rings under the influence of (1) differential precession due to the planetary quadrupole moment; (2) self-gravity; (3) viscous forces due to interparticle collisions; and (4) eccentricity excitation by shepherd satellites. The principal conclusions are that: (1) uniform precession can be enforced by self-gravity; the resulting configuration is both dynamically and secularly stable. (2) due to viscous forces the line of apsides at the inner ring edge is not exactly aligned with the line of apsides at the outer edge; the apse shift may be detectable in the alpha and beta rings of Uranus; (3) the mean eccentricity is determined by a balance between viscous damping and excitation by shepherds; (4) and the dimensionless eccentricity gradient is expected to be positive and of order unity in most eccentric rings, as observed.

Borderies, N.↗

Wide range weight functions for the strip with a single edge crack

A closed form expression for the weight function for a strip with a single edge crack is presented. The expression is valid for relative crack lengths from zero to unity. It is based on the assumption that the shape of an opened edge crack can be approximated by a conic section. The results agree well with published values for weight functions, stress intensity factors, and crack mouth opening displacements.

Orange, T. W.↗

Acoustic shocks in a variable area duct containing near sonic flows

Acoustic shock waves in a variable area duct which contains near sonic flows are considered. The problem is modeled after an aeroengine inlet. Area variation of a duct and high Mach number mean the flow reduces acoustical energy yielding substantial noise reduction. One possible reason for this is acoustic shock. The use of an explicit accurate numerical method which captures shocks is described. Comparison of the results are made with an existing asymptotic theory for Mach numbers close to unity. When shock occurs reduction of sound pressure levels are shown by example.

Hariharan, S. I.↗

Neutrons and Gamma Rays from Solar Flares

The theory of neutron and gamma-ray production in flares is reviewed and comparisons of the calculations with data are made. The principal conclusions pertain to the accelerated proton and electron numbers and spectra in flares and to the interaction site of these particles in the solar atmosphere. For the June 21, 1980 flare, from which high-energy neutrons and high-energy ( MeV) photons were seen, the electron-to-proton ratio is energy dependent and much smaller than unity at energies greater than 1 MeV. The interaction site of these particles appears to be the solar chromosphere.

Ramaty, R.↗

The representation of manipulable solid objects in a relational database

This project is concerned with the interface between database management and solid geometric modeling. The desirability of integrating computer-aided design, manufacture, testing, and management into a coherent system is by now well recognized. One proposed configuration for such a system uses a relational database management system as the central focus; the various other functions are linked through their use of a common data repesentation in the data manager, rather than communicating pairwise to integrate a geometric modeling capability with a generic relational data managemet system in such a way that well-formed questions can be posed and answered about the performance of the system as a whole. One necessary feature of any such system is simplification for purposes of anaysis; this and system performance considerations meant that a paramount goal therefore was that of unity and simplicity of the data structures used.

Bahler, D.↗

The design and operational development of self-streamlining 2-dimensional flexible walled test sections

Self streamlining two dimensional flexible walled test sections eliminate the uncertainties found in data from conventional test sections particularly at transonic speeds. The test section sidewalls are rigid, while the floor and ceiling are flexible and are positioned to streamline shapes by a system of jacks, without reference to the model. The walls are therefore self streamlining. Data are taken from the model when the walls are good streamlines such that the inevitable residual wall induced interference is acceptably small and correctable. Successful two dimensional validation testing at low speeds has led to the development of a new transonic flexible walled test section. Tunnel setting times are minimized by the development of a rapid wall setting strategy coupled with on line computer control of wall shapes using motorized jacks. Two dimensional validation testing using symmetric and cambered aerofoils in the Mach number range up to about 0.85 where the walls are just supercritical, shows good agreement with reference data using small height-chord ratios between 1.5 and unity.

Wolf, S. W. D.↗

Characterization of surficial geologic units on Venus from Pioneer Venus radar data: A progress report

A classification database using the reflectivity (derived from the altimetry data), rms slope, and the first principal component of altimetry and topographic slope is presented. The resultant clustered data is examined qualitatively as well as quantitatively, to establish the statistical integrity of each cluster by use of an interactive, ternary plotting algorithm. This algorithm plots, for a cluster, the position of each of its pixels within a ternary diagram whose apices represent reflectivity, rms slope, and the first principal component. The digital values in these three databases are normalized such that unity is represented by a value of 255 in each database. The frequencies of each plotted point within the ternary diagram are recorded in order to establish the mode of each cluster. The pixels of each cluster are displayed as one separate color; their ternary plot will show not only the interrelations between clusters, but also the presence of any anomalous points within a cluster. Existing lunar and terrestrial analog radar data is used to establish fields within this ternary diagram that are indicative of as many different geologic materials and tectonics settings as possible. The resultant fields are used to determine empirically the geologic significance of the clusters resulting from the cluster analysis.

Davis, P. A.↗

Ground-based Measurements of Solar Irradiance Variations

Observations and analysis programs being carried out at the San Fernando Observatory are reviewed. A digital analysis of sunspot areas from full disk photographs shows an especially good correlation with areas published in the Solar Geophysical Data Bulletin with scale factor near unity. Results are presented from photoelectric photometry of active regions using the Extreme Limb Photometer. These results suggest energy balance between sunspots and faculae. Preliminary results are presented from a new program of photoelectric photometry using a linear array of diodes. Results are presented for the August 1982 passage of a large active region. This active region caused a maximum dip in the quiet Sun irradiance of about 800 parts per million.

Chapman, G. A.↗

Design study of a dual-cycle turbofan-ramjet engine for a hypersonic aircraft

Computer modelling was used with two different designs of an advanced turbofan-ramjet in order to derive performance predictions. The engine would enable an aircraft to take-off, accelerate to Mach 5.0, and climb to 90,000 ft. The two concepts included a turbofan with a ramjet annularly wrapped around it and a side-by-side configuration with the ramjet having a rectangular shape and mounted alongside the turbofan. The studies were performed to model weight, length, fuel efficiency, and the requirements of the thrust/drag ratio to exceed unity over the entire flight path. LH2 would be used for fuel and to regeneratively cool the combustion chamber. Turbofan operation with and without afterburner and with and without the ramjet inlet open were examined, as were variable areas for the burners. A side-by-side configuration displayed the best performance predictions, with a ramjet mass flow being 75 percent that of the turbofan and maximum temperatures being equal.

Zumwalt, G. W.↗