Search NASA⌕ Search

SEARCH · Search NASA

Results for “ab initio phasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Neutron-proton scattering with lattice chiral effective field theory at next-to-next-to-next-to-leading order

Here we present a new lattice formulation of chiral effective field theory interactions with a simpler decomposition into spin channels. With these interactions the process of fitting to the empirical scattering phase shifts is simplified, and the resulting lattice phase shifts are more accurate than in previous studies. We present results for the neutron-proton system up to next-to-next-to-next-to-leading order for lattice spacings of 1.97, 1.64, 1.32, and 0.99 fm. Our results provide a pathway to ab initio lattice calculations of nuclear structure, reactions, and thermodynamics with accurate and systematic control over the chiral nucleon-nucleon force.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ab initio calculations for void swelling bias in α - and δ -plutonium

Void swelling can develop in materials under persistent irradiation when nonequilibrium vacancy and self-interstitial populations migrate under sufficiently asymmetric interaction biases. In conventional metals, the propensity is determined to the first approximation by comparing point-defect relaxation strains. We thus present DFT-based calculations of structures and formation energies and volumes of point defects in the α and the δ phases of plutonium. Here we discuss the pros and cons of various levels of electronic structure theory: spin polarization, spin-orbit coupling, and orbital polarization. Our results show that lattice defects in δ-Pu, in contrast to most fcc metals, have surprisingly small formation volumes. Equally unexpected are the large defect formation volumes found in the low-symmetry α-Pu phase. Both these unusual properties can be satisfactorily explained from defect-induced spin/orbital moment formation and destruction in the Pu phases. Surprisingly, the point defects in α-Pu are found to induce far larger transformation of the local electronic structure than in δ-Pu. When we use the calculated defect properties to estimate the classic void swelling bias in each of the phases, we find it to be unusually small in δ-Pu but likely much larger in α-Pu. Hence, swelling rates and mechanisms can diverge dramatically between the different phases of Pu. Especially in the transient regime before the formation of large defect clusters, the swelling rate of α-Pu can reliably be expected to be much larger than δ-Pu. However, accurate forecasts over longer times will require the conventional void-swelling theory to be modified to handle the complexities presented by the different Pu phases. As a case in point, we show the possible anomalous temperature dependence of vacancy properties in δ-Pu, caused by entropic contributions from defect-induced spin-lattice fluctuations. Such complications may affect defect-defect interactions and thus alter the void swelling bias.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamics and Magnetism of YCo5 Compound Doped with Fe and Ni: An Ab Initio Study

YCo5 permanent magnet exhibits high uniaxial magnetocrystalline anisotropy energy and has a high Curie temperature. These are good properties for a permanent magnet, but YCo5 has a low energy product, which is notably insufficient for a permanent magnet. In order to improve the energy product in YCo5, we suggest replacing cobalt with iron, which has a much bigger magnetic moment. With a combination of density-functional-theory calculations and thermodynamic CALculation of PHAse Diagrams (CALPHAD) modeling, we show that a new magnet, YFe3(Ni1-xCox)2, is thermodynamically stable and exhibits an improved energy product without significant detrimental effects on the magnetocrystalline anisotropy energy or the Curie temperature.

anisotropy↗

Experimental and theoretical investigation into the high pressure deflagration products of 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105)

Diamond anvil cell (DAC) laser ignition experiments and reactive ab initio molecular dynamics (AIMD) simulations were performed on the high explosive (HE) LLM-105 to investigate its high pressure (HP) deflagration chemistry. Raman and optical spectroscopy measurements reveal LLM-105 reacts into an opaque carbonaceous product at 4–25 GPa. At pressures >~ 27 GPa, the reaction product consists of an amorphous optically transparent solid and nitrogen (N 2 ) in the solid phase. While not a one-to-one comparison due to the small time and length scales, the HP AIMD simulations show that some of the product is molecular N 2 , in qualitative agreement with experiment, while above 20 GPa most of the product consists of large amorphous C x H y N z O k clusters. Clustering is enhanced with pressure and reduces with temperature. In the experiments with initial sample pressure >~ 25 GPa, the pressure within the DAC decreases with minimal change in DAC cavity area. At initial sample pressures of 43.9 GPa, when quenched to 0 K, simulations predict a product experiencing a lower pressure consistent with the experimental measurement at lower load pressures. In conclusion, the results are important for understanding the HP deflagration chemistry of LLM-105.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principle investigation on catalytic hydrogenation of benzaldehyde over Pt-group metals

We report that understanding the hydrogenation of organic compounds in the aqueous phase has always been fundamentally important for improving carbon neutral pathways to fuels and value-added chemicals. In this study, we investigated both thermodynamic and kinetic profiles of benzaldehyde hydrogenation over the Pd(111) and Pt(111) metal surfaces using density functional theory (DFT) and ab initio molecular dynamic (AIMD) simulations. The adsorption of H 2 shows the mixed preference of H adsorption sites on the Pt(111), while the fcc adsorption site is dominant for H on the Pd(111). When benzaldehyde is added to the systems, we observe a strong reduction of benzaldehyde on charged Pd (111) surface compared with that on neutral surface. In contrast, charged state of the Pt(111) surface does not change their interaction. Subsequent hydrogenation reaction of benzaldehyde over Pd(111), proceeding via Langmuir-Hinshelwood mechanism, is affected by two major factors: the presence of H 2 O solvent and surface charge. The presence of H 2 O solvent greatly reduces the activation energy of C-H and O-H bond formation during the hydrogenation process. Furthermore, the hydrogenation step via C-H bond formation is preferred thermodynamically and kinetically over O-H bond formation during thermocatalytic hydrogenation, while the opposite trend holds true during electrocatalytic hydrogenation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Magnetic properties of intercalated quasi-2D Fe 3-x GeTe 2 van der Waals magnet

Among several well-known transition metal-based compounds, cleavable van der Waals (vdW) Fe 3-x GeTe 2 (FGT) magnet is a strong candidate for use in two-dimensional (2D) magnetic devices due to its strong perpendicular magnetic anisotropy, sizeable Curie temperature (T C ~154 K), and versatile magnetic character that is retained in the low-dimensional limit. While the T C remains far too low for practical applications, there has been a successful push toward improving it via external driving forces such as pressure, irradiation, and doping. Here we present experimental evidence of a room temperature (RT) ferromagnetic phase induced by the electrochemical intercalation of common tetrabutylammonium cations (TBA+) into quasi-2D FGT. We obtained Curie temperatures as high as 350 K with chemical and physical stability of the intercalated compound. The temperature-dependent Raman measurements, in combination with vdW-corrected ab initio calculations, suggest that charge transfer (electron doping) upon intercalation could lead to the observation of RT ferromagnetism. This work demonstrates that molecular intercalation is a viable route in realizing high-temperature vdW magnets in an inexpensive and reliable manner and has the potential to be extended to bilayer and few-layer vdW magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Half metallic ferromagnetism in alkali metal nitrides MN (M = Rb, Cs): A first principles study

The structural, electronic and elastic properties of two alkali metal nitrides (MN: M= Rb, Cs) are investigated by the first principles calculations based on density functional theory using the Vienna ab-initio simulation package. At ambient pressure the two nitrides are stable in ferromagnetic state with CsCl structure. The calculated lattice parameters are in good agreement with the available results. The electronic structure reveals that these materials are half metallic in nature. A pressure-induced structural phase transition from CsCl to ZB phase is observed in RbN and CsN.

36 MATERIALS SCIENCE↗

A first principles study of structural stability, electronic structure and mechanical properties of beryllium alanate BeAlH{sub 5}

Ab initio calculations are performed to investigate the structural stability, electronic structure and mechanical properties of BeAlH{sub 5} for monoclinic crystal structures with two different types of space group namely P2{sub 1} and C{sub 2}/c. Among the considered structures monoclinic (P2{sub 1}) phase is found to be the most stable at ambient condition. The structural phase transition from monoclinic (P2{sub 1}) to monoclinic (C{sub 2}/c) phase is observed in BeAlH{sub 5}. The electronic structure reveals that this compound is insulator. The calculated elastic constants indicate that this material is mechanically stable at ambient condition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Communication: The ground electronic state of Si{sub 2}C: Rovibrational level structure, quantum monodromy, and astrophysical implications

We report the gas-phase optical detection of Si{sub 2}C near 390 nm and the first experimental investigation of the rovibrational structure of its {sup 1}A{sub 1} ground electronic state using mass-resolved and fluorescence spectroscopy and variational calculations performed on a high-level ab initio potential. From this joint study, it is possible to assign all observed K{sub a} = 1 vibrational levels up to 3800 cm{sup −1} with confidence, as well as a number of levels in the K{sub a} = 0, 2, and 3 manifolds. Dixon-dip plots for the bending coordinate (ν{sub 2}) allow an experimental determination of a barrier to linearity of 783(48) cm{sup −1} (2σ), in good agreement with theory (802(9) cm{sup −1}). The calculated (K{sub a}, ν{sub 2}) eigenvalue lattice shows an archetypal example of quantum monodromy (absence of a globally valid set of quantum numbers) that is reflected by the experimentally observed rovibrational levels. The present study provides a solid foundation for infrared and optical surveys of Si{sub 2}C in astronomical objects, particularly in the photosphere of N- and J-type carbon stars where the isovalent SiC{sub 2} molecule is known to be abundant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate tight-binding model for twisted bilayer graphene describes topological flat bands without geometric relaxation

A major hurdle in understanding the phase diagram of twisted bilayer graphene is the roles of lattice relaxation and electronic structure on isolated band flattening near magic twist angles. Here in this work, the authors develop an accurate local environment tight-binding model fit to tight-binding parameters computed from ab initio density-functional theory calculations across many atomic configurations. With the accurate parametrization, it is found that the magic angle shifts to slightly lower angles than often quoted, from around 1.05° to around 0.99°, and that isolated flat bands appear for rigidly rotated graphene layers, with enhancement of the flat bands when the layers are allowed to distort. Study of the orbital localization supports the emergence of fragile topology in the isolated flat bands without the need for lattice relaxation.

36 MATERIALS SCIENCE↗

Uniaxial Strain Control of Bulk Ferromagnetism in Rare-Earth Titanates

The perovskite rare-earth titanates are model Mott insulators with magnetic ground states that are very sensitive to structural distortions. These distortions couple strongly to the orbital degrees of freedom and, in principle, it should be possible to tune the superexchange and the magnetic transition with strain. We investigate the representative system (Y,La,Ca)TiO 3 , which exhibits low crystallographic symmetry and no structural instabilities. From magnetic susceptibility measurements of the Curie temperature, we demonstrate direct, reversible, and continuous control of ferromagnetism by influencing the TiO 6 octahedral tilts and rotations with uniaxial strain. The relative change in T C as a function of strain is well described by ab initio calculations, which provides detailed understanding of the complex interactions among structural, orbital, and magnetic properties in rare-earth titanates. The demonstrated manipulation of octahedral distortions opens up far-reaching possibilities for investigations of electron-lattice coupling, competing ground states, and magnetic quantum phase transitions in a wide range of quantum materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of hydrogen adsorption in the bulk and on the surface of magnesium nanoparticles

The stability of magnesium hydride (MgH{sub x}) nanoparticles (x = 0.5, ?, 2) is investigated using ab initio calculations. It is shown that for a nanoparticle diameter of D {approx} 5 nm, the internal pressure becomes lower than 3 kbar; for this reason, the structure of hydride nanoparticles coincides with the structure of this hydride in crystalline form. It is found that the phase of partly saturated MgH{sub x} hydrides (x < 2) must decompose into the phase of pure hcp magnesium and the {alpha} phase of MgH{sub 2}. The frequencies of jumps of hydrogen atoms within the hcp phase of magnesium and in the {alpha} phase of MgH{sub 2} are calculated; it is shown that slow diffusion of hydrogen in magnesium is due to the large height of potential barriers for motion of hydrogen within MgH{sub 2}. To attain high diffusion rates, the structures of Mg{sub 53}Sc and Mg{sub 53}Ti crystals and their hydrides are calculated. It is found that the frequency of jumps of H atoms in Mg{sub 53}ScH{sub 108} near the Sc atoms does not noticeably change as compared to the frequency of jumps in the {alpha} phase of MgH{sub 2}, while the frequency of jumps in Mg{sub 53}TiH{sub 108} near Ti atoms is higher by approximately a factor of 2.5 x 10{sup 6}. This means that diffusion in manganese hydride with small admixtures of titanium atoms must be considerably eased. Chemical dissociation of hydrogen molecules on the (0001) surface of hcp magnesium, on the given surface with adjoined individual Ti atoms, and on the surface of a one-layer titanium cluster on the given surface of magnesium is investigated. It is found that dissociation of hydrogen at solitary titanium atoms, as well as on the surface of a Ti cluster, is facilitated to a considerable extent as compared to pure magnesium. This should also sharply increase the hydrogen adsorption rate in magnesium nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanostructure Determination by Co-Refining Models to Multiple Datasets

The results of the work are contained in the publications resulting from the grant (which are listed below). Here I summarize the main findings from the last period of the award, 2006-2007: • Published a paper in Science with Igor Levin outlining the “Nanostructure Problem”, our inability to solve structure at the nanoscale. • Published a paper in Nature demonstrating the first ever ab-initio structure determination of a nanoparticle from atomic pair distribution function (PDF) data. • Published one book and 3 overview articles on PDF methods and the nanostructure problem. • Completed a project that sought to find a structural response to the presence of the so-called “intermediate phase” in network glasses which appears close to the rigidity percolation threshold in these systems. The main result was that we did not see convincing evidence for this, which drew into doubt the idea that Ge x Se 1-x glasses were a model system exhibiting rigidity percolation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spectroscopic Studies of Electronically Active Defects in Transition Metal Oxides for Advanced Si Devices

Based on spectroscopic studies, and guided by ab initio theory, the electron and hole traps in HfO2 and other transition metal elemental oxides e.g., TiO2, are assigned to O-atom divacancies, clustered at internal grain boundaries. Engineering solutions for defect reduction are identified: (i) deposition of ultra-thin, < 2 nm HfO2 and phase separated Hf silicate dielectrics, in which grain boundary formation is suppressed by effectively eliminating inter-primitive unit cell {pi}-bonding interactions, and (ii) non-crystalline Zr/Hf Si oxynitrides without nanocrystalline grain boundaries.

36 MATERIALS SCIENCE↗

Spin fluctuations and superconductivity in a three-dimensional tight-binding model for BaFe 2 ⁢As 2

Despite the wealth of experimental data on the Fe-pnictide compounds of the K⁢Fe 2 ⁢As 2 type, K = Ba, Ca, or Sr, the main theoretical work based on multiorbital tight-binding models has been restricted so far to the study of the related 1111 compounds. This can be ascribed to the more three-dimensional electronic structure found by ab initio calculations for the 122 materials, making this system less amenable to model development. In addition, the more complicated Brillouin zone (BZ) of the body-centered tetragonal symmetry does not allow a straightforward unfolding of the electronic band structure into an effective 1Fe/unit cell BZ. Here we present an effective five-orbital tight-binding fit of the full density functional theory band structure for BaFe 2 ⁢As 2 including the k z dispersions. We compare the five-orbital spin fluctuation model to one previously studied for LaOFeAs and calculate the random-phase approximation enhanced susceptibility. Using the fluctuation exchange approximation to determine the leading pairing instability, we then examine the differences between a strictly two-dimensional model calculation over a single k z cut of the BZ and a completely three-dimensional approach. We find pairing states quite similar to the 1111 materials, with generic quasi-isotropic pairing on the hole sheets and nodal states on the electron sheets at k z = 0, which however are gapped as the system is hole doped. On the other hand, a substantial k z dependence of the order parameter remains, with most of the pairing strength deriving from processes near k z = π. Furthermore, these states exhibit a tendency for an enhanced anisotropy on the hole sheets and a reduced anisotropy on the electron sheets near the top of the BZ.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local lattice distortion mediated formation of stacking faults in Mg alloys

Long periodic stacking ordered phases (LPSOs), consisting of various configurations of stacking faults, play an important role in developing ultrastrong Mg alloys with moderate ductility. However, their formation mechanisms are far from clear as no apparent defects are introduced during their formation as it is commonly believed that stacking faults are induced by defects. Here, we present the atomic and electronic basis for lattice-distortion-mediated formation of stacking faults, i.e., localized face-centredcubic (FCC) structures, within a Mg-Zn-Y alloy with a hexagonal close-packed (HCP) structure. The atomic motion trajectories from ab-initio molecular dynamic simulations show that the Mg atoms occupying the nearest neighbour positions of Zn and Y solute atoms undergo a local HCP-to-FCC transition. It is revealed that a local lattice distortion caused by the solute atoms enables the Mg atoms to move and rearrange into a local FCC configuration, which is validated by high resolution scanning transmission microscopy and in-situ synchrotron X-ray diffraction. Our simulations provide profound insight into the formation mechanism of stacking faults in HCP Mg and their physical nature of phase transformations. This is not only critically important because conventional defects, such as dislocations and vacancies, are important to deformation for Mg and its alloys, but also because they serve as a potential new approach to the design of advanced Mg alloys when defects could be used to facilitate

36 MATERIALS SCIENCE↗

Dynamics of Hydroxyl Anions Promotes Lithium Ion Conduction in Antiperovskite Li 2 OHCl

Li 2 OHCl is an exemplar of the antiperovskite family of ionic conductors, for which high ionic conductivities have been reported, but in which the atomic-level mechanism of ion migration is unclear. The stable phase is both crystallographically defective and disordered, having similar to 1/3 of the Li sites vacant, while the presence of the OH(- )anion introduces the possibility of rotational disorder that may be coupled to cation migration. In this work, complementary experimental and computational methods are applied to understand the relationship between the crystal chemistry and ionic conductivity in Li 2 OHCl , which undergoes an orthorhombic to cubic phase transition near 311 K (approximate to 38 degrees C) and coincides with the more than a factor of 10 change in ionic conductivity (from 1.2 x 10 -5 mS/cm at 37 degrees C to 1.4 x 10 -3 mS/cm at 39 degrees C). X ray and neutron experiments conducted over the temperature range 20-200 degrees C, including diffraction, quasi-elastic neutron scattering (QENS), the maximum entropy method (MEM) analysis, and ab initio molecular dynamics (AIMD) simulations, together show conclusively that the high lithium ion conductivity of cubic Li2OHCl is correlated to "paddlewheel" rotation of the dynamic OH - anion. The present results suggest that in antiperovskites and derivative structures a high cation vacancy concentration combined with the presence of disordered molecular anions can lead to high cation mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio Structure Determination of Mg10Ir19B16

The ab initio structure determination of a novel unconventional noncentro-symmetric superconductor Mg{sub 10}Ir{sub 19}B{sub 16} (T{sub c} = 5 K) has been performed using a method that involves a combination of experimental data and calculations. Electron diffraction, X-ray powder diffraction, phase estimation routines, quantum mechanical calculations, high-resolution electron microscopy, and structural chemistry arguments are used. With the strengths of different methods used to eliminate the ambiguities encountered in others, the complete structure, including a very light B atom, has been determined with a high accuracy from impure polycrystalline powder samples, which suggests that the type of analysis described may be used to successfully address other similar intractable problems. The solved structure of Mg{sub 10}Ir{sub 19}B{sub 16} shows a complex nature that irregular coordination environments preclude a conversional description of compact packing of coordination polyhedra; however, it can be easier understood as ordered in an onion-skin-like series of nested polyhedra.

36 MATERIALS SCIENCE↗