Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Effect of Annealing Conditions on Recovery of Lattice Damage in a High-Energy-Implanted 4H-SiC Superjunction PIN Diode

A high energy ion implantation system has been recently developed at the Tandem Van de Graaff facility at Brookhaven National Laboratory with tunable energy to 150 MeV capable of multi-step, deep implantation in 4H-SiC wafers with dopant atoms, such as B, P, Al, and N. Medium and high voltage devices with deep junctions can be fabricated using this system. Lattice strain introduced by the implantation process needs to be recovered and dopant atoms activated by appropriate annealing process as the device performance is strongly associated with the extent of recovery of the lattice. Using Synchrotron X-ray Rocking Curve Topography (SXRCT) and Reciprocal Space Mapping (RSM), the strain induced by high energy implantation of Al and N in 4H-SiC in different patterns are measured and mapped. It is observed that the strain levels correlate with the total fluence levels. PiN diodes fabricated on these implanted wafers were then annealed at temperatures ranging from 1700 °C to 2000 °C for 60 min. The SXRCT and RSM analysis of the annealed samples suggests that for the same annealing duration, higher temperature leads to better lattice recovery.

43 PARTICLE ACCELERATORS↗

Effect of local structures on crystallization in deeply undercooled metallic glass-forming liquids

The crystallization mechanism in deeply undercooled ZrCu metallic glass-forming liquids was investigated via molecular dynamics simulations. It was found that the crystallization process is mainly controlled by the growth of crystal nuclei formed by the BCC-like atomic clusters, consistent with experimental speculations. The crystallization rate is found to relate to the number of growing crystal nuclei in the crystallization process. The crystallization rate in systems with more crystal nuclei is significantly hindered by the larger surface fractions of crystal nuclei and their different crystalline orientations. It is further revealed that in the crystallization in deeply undercooled regions, the BCC-like crystal nuclei are formed from the inside of the precursors formed by the FCC-like atomic clusters, and growing at the expense of the precursors. Meanwhile, the precursors are expanding at the expense of the outside atomic clusters. This process is consistent with the so-called Ostwald step rule. The atomic structures of metallic glasses are found to have significant impact on the subsequent crystallization process. In the Zr{sub 85}Cu{sub 15} system, the stronger spatial correlation of Cu atoms could hinder the crystallization processes in deeply undercooled regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of the partner atom on the spectra of interatomic Coulombic decay triggered by resonant Auger processes

The resonant-Auger – interatomic Coulombic decay (ICD) cascade was recently suggested as an efficient means of controlling the course of the ICD process. Recent theoretical and experimental works show that control over the energies of the emitted ICD electrons can be achieved either by varying the photon energy to produce different initial core excitations or by changing the neighboring species. This work presents a theoretical investigation on the role of the rare-gas neighbor and clarifies how the latter influences the ICD process. For this purpose, we compare fully ab initio computed ICD-electron and kinetic energy release spectra following the 2p{sub 3/2} → 4s, 2p{sub 1/2} → 4s and 2p{sub 3/2} → 3d of Ar in ArKr and Ar{sub 2}. We demonstrate that the presence of the chemically “softer” partner atom results in an increase in the energies of the emitted ICD electrons, and also in the appearance of additional ICD-active states. The latter leads to a threefold increase in the ICD yield for the case of the 2p{sub 3/2,} {sub 1/2} → 4s parent core excitations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control of multitransparency windows via dark-state phase manipulation

We identify a process in which we can control the behavior of an atomic medium to switch between transparent and enhanced-absorption at multiple frequencies. The process relies on the quantum interference between multiple dark states, which can be constructive or destructive at different frequencies and can be altered dramatically by changing the phase difference between the two circularly polarized components of a single coherent field. This phase-controlled switching behavior is obtainable without altering the powers or frequency detunings of the beams. We demonstrate the process experimentally by using two coherent fields and atomic rubidium vapor. Such selective switching between multiple frequency channels could also have applications in optical communication and quantum information processing.

74 ATOMIC AND MOLECULAR PHYSICS↗

Structural transformations of graphene exposed to nitrogen plasma: quantum chemical molecular dynamics simulations

Nitrogen-doped graphene (N-graphene) has been intensively studied for tailoring the electronic property of the graphene, because different nitrogen configurations influence the electronic properties of N-graphene in different ways. However, atomically precise control of the nitrogen configurations during the doping process remains a challenge in the synthesis of N-graphene. Moreover, additional structural transformations of the graphene carbon network structure as a side-effect of plasma doping are little understood and are as of yet uncontrollable. Therefore, we theoretically investigated the nitrogen doping process of graphene for a range of nitrogen atom incident kinetic energies in nonequilibrium quantum chemical molecular dynamics (QM/MD) simulations. We observed and characterized prominent configurations of N-containing graphene. In analogy to similar, earlier studies of graphene plasma hydrogenation, we observed an Eley–Rideal associative desorption mechanism during the graphene plasma nitrogenation, producing molecular nitrogen. Especially for graphitic-N (Gr-N) and Stone–Wales-defect-N (SW-N) configurations, which are frequently observed in experimental studies, we discovered two typical chemical reaction mechanisms which were well categorized by two key processes: adsorption of primary nitrogen dopant and collision with a secondary nitrogen dopant. Here, we discussed effects of the incident nitrogen energy on the formation mechanism, and propose a method to generate of Gr-N and SW-N configurations selectively by tuning the conditions with respect to the two key formation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding KOtBu in atomic layer deposition – in situ mechanistic studies of the KNbO3 growth process

Functional coatings based on alkali metals have become increasingly attractive in the current shift towards sustainable technologies. While lithium-based compounds have a natural impact on batteries, other alkali metal compounds are important as replacements for toxic materials in a range of electronic devices. This is especially true for potassium, being a major component in e.g. K x Na 1-x NbO 3 (KNN) and KTa x Nb 1-x O 3 (KTN), with hope to replace Pb(Zr x Ti 1-x )O 3 (PZT) in piezo-/ferroelectric and electrooptic devices. ALD facilitates functional conformal coatings at deposition temperatures far below what is reported using other techniques and with excellent compositional control. The ALD growth of potassium-containing films using KO t Bu has, however, been unpredictable. Untraditional response to the pulse composition and precursor dose, severe reproducibility issues, and very high growth per cycle are some of the puzzling features of these processes. In this article, we shed light on the growth behavior of KO t Bu in ALD by in situ quartz crystal microbalance and Fourier transform infrared spectroscopy studies. We study the precursor's behavior in the technologically interesting KNbO 3 -process, showing how the potassium precursor strongly affects the growth of other cation precursors. We show that the strong hygroscopic nature of the intermediary potassium species has far-reaching implications throughout the growth. This helps not only to enhance the understanding of alkali metal containing compounds’ growth in ALD, but also to provide the means to control the growth of novel sustainable technological materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Initial Reduction of the PdO(101) Surface: Role of Oxygen Vacancy Formation Kinetics

Here, we investigated the initial thermal reduction of the PdO(101) surface using density functional theory (DFT) calculations. The defect-free PdO(101) surface consists of parallel rows of undercoordinated Pd and O atoms (Pd cus and O cus , respectively). DFT was used to map out the elementary processes of O cus vacancy formation, oxygen surface atom diffusion along the Pd cus rows, and various O 2 formation pathways. Because oxygen vacancies form during the reduction of the surface, the elementary processes were examined with and without the presence of adjacent O cus vacancies. DFT calculations show that the presence of oxygen vacancies strongly affects the barriers of adjacent surface processes. Barriers for O vacancy formation are reduced by nearly 50% with an adjacent O vacancy. The barrier for O 2 formation along the Pd cus row drops from 1.54 eV on the defect-free PdO(101) surface to 0.81 eV in the presence of an O cus vacancy dimer. Yet, the presence of O cus vacancies also leads to more strongly bound O 2 on the Pd cus row. The strong neighbor effect of O vacancies on the PdO(101) surface will favor the growth of O vacancy chains and increase the rate of thermal reduction of the surface, both features that have been observed in recent ultrahigh vacuum isothermal reduction experiments of the PdO(101) surface.

Defects in solids↗

High-resolution Groundwater Investigation at a FUSRAP Site with an Aging Water-supply Infrastructure: Former Harshaw Chemical Company, Ohio - 16146

The Former Harshaw Chemical Company (HCC) Site is located in Cleveland, Ohio, approximately 5 kilometers (km) (3 miles) south of downtown Cleveland, in an industrialized area adjacent to the Cuyahoga River and Big Creek. Developed site parcels include former production areas with legacy buildings, former production area foundations, parking areas associated with previously demolished buildings, and re-developed privately-owned commercial properties. The HCC Site was initially developed 1905 and commercially manufactured chemical solvents, metal salts, fluorides, hydrofluoric acids, and other chemical products. HCC began production activities for the Manhattan Engineer District (MED) in late 1942 in support of the United States' early atomic weapons program. The primary process conducted by the HCC consisted of the refining of uranium oxide to produce several uranium-bearing materials, including uranium hexafluoride (UF{sub 6}), uranium tetrafluoride (UF{sub 4}), and uranium tetrachloride (UCl{sub 4}). The HCC also conducted numerous chemical and radiological research and production activities for the MED and later for the Atomic Energy Commission (AEC). Groundwater and soil contamination resulting from these activities is characterized in the site Remedial Investigation Report (USACE 2009) and primarily found near the G-1 process building. A Feasibility Study (USACE 2012) evaluated soil remediation alternatives and their potential impacts to future groundwater conditions. Since there is no groundwater pathway in the assumed industrial future land use, groundwater evaluations are intended to demonstrate that further degradation of groundwater will not occur after potential soil remediation. Total uranium is the primary MED-based groundwater contaminant and was numerically simulated using a site-specific groundwater flow and transport model. Remedial results are judged in terms of no significant impact, significant positive impact (i.e., significantly decreased extent of contamination), or significant negative impact (i.e., significantly increased extent of contamination). A complicating factor in the groundwater simulation and decision-making process for this site is the existence of municipal water-line leakage on and around the site. This aging infrastructure, in conjunction with the generations of modifications, promoted leakage and fresh-water contact with contaminated soils. To optimize the groundwater conceptual site model for numerical model updates, a high-density groundwater well network was installed in conjunction with the demolition of the G-1 building. The results of the detailed groundwater investigation, coincident soil sampling, utility-line termination, municipal water-line repairs, water-level collection, and uranium sampling indicates the groundwater is re-equilibrating and will lead to optimal decisions and site remediation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analysis of the light shift in the hyper-Ramsey scheme of two-level atom interrogation in an optically dense medium

The properties of the Ramsey resonance and its sensitivity to the light shift of the atomic transition frequency are investigated in the case of the hyper-Ramsey interrogation in an optically dense medium of cold atoms. The shape of the interrogating pulses varies significantly due to the processes of absorption and dispersion in the atomic medium, which leads to a distortion of the Ramsey resonance and a periodic change in the central minimum to the maximum and vice versa. The dependence of the position of the central resonance on the light shift of the atomic transition is found with the attenuation of radiation in the medium taken into account. It is shown that in a certain section of the medium this dependence becomes N-shaped. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The formation of IRIS diagnostics. V. A quintessential model atom of C ii and general formation properties of the C ii lines at 133.5 nm

The C ii 133.5 nm lines are important observables for the NASA/SMEX mission Interface Region Imaging Spectrograph. To make three-dimensional (3D) non-LTE radiative transfer computationally feasible, it is crucial to have a model atom with as few levels as possible while retaining the main physical processes. We here develop such a model atom and we study the general formation properties of the C ii lines. We find that a nine-level model atom of C i–C iii with the transitions treated assuming complete frequency redistribution (CRD) suffices to describe the C ii 133.5 nm lines. 3D scattering effects are important for the intensity in the core of the line. The lines are formed in the optically thick regime. The core intensity is formed in layers where the temperature is about 10 kK at the base of the transition region. The lines are 1.2–4 times wider than the atomic absorption profile due to the formation in the optically thick regime. The smaller opacity broadening happens for single peak intensity profiles where the chromospheric temperature is low with a steep source function increase into the transition region, the larger broadening happens when there is a temperature increase from the photosphere to the low chromosphere leading to a local source function maximum and a double peak intensity profile with a central reversal. Assuming optically thin formation with the standard coronal approximation leads to several errors: neglecting photoionization severly underestimates the amount of C ii at temperatures below 16 kK, erroneously shifts the formation from 10 kK to 25 kK, and leads to too low intensities.

79 ASTRONOMY AND ASTROPHYSICS↗

The DREAM Endstation at the Linac Coherent Light Source

Free-electron lasers (FEL), with their ultrashort pulses, ultrahigh intensities, and high repetition rates at short wavelength, have provided new approaches to Atomic and Molecular Optical Science. One such approach is following the birth of a photo electron to observe ion dynamics on an ultrafast timescale. Such an approach presents the opportunity to decipher the photon-initiated structural dynamics of an isolated atomic and molecular species. It is a fundamental step towards understanding single- and non-linear multi-photon processes and coherent electron dynamics in atoms and molecules, ultimately leading to coherent control following FEL research breakthroughs in pulse shaping and polarization control. A key aspect for exploring photoinduced quantum phenomena is visualizing the collective motion of electrons and nuclei in a single reaction process, as dynamics in atoms/ions proceed at femtosecond (10 –15 s) timescales while electronic dynamics take place in the attosecond timescale (10 –18 s). Here, we report on the design of a Dynamic Reaction Microscope (DREAM) endstation located at the second interaction point of the Time-Resolved Molecular and Optical (TMO) instrument at the Linac Coherent Light Source (LCLS) capable of following the photon–matter interactions by detecting ions and electrons in coincidence. The DREAM endstation takes advantage of the pulse properties and high repetition rate of LCLS-II to perform gas-phase soft X-ray experiments in a wide spectrum of scientific domains. With its design ability to detect multi-ions and electrons in coincidence while operating in step with the high repetition rate of LCLS-II, the DREAM endstation takes advantage of the inherent momentum conservation of reaction product ions with participating electrons to reconstruct the original X-ray photon–matter interactions. In this report, we outline in detail the design of the DREAM endstation and its functionality, with scientific opportunities enabled by this state-of-the-art instrument.

47 OTHER INSTRUMENTATION↗

Atomic Layer-Deposited Al{sub 2}O{sub 3} Interlayer for Improved Tribological and Anti-corrosion Properties of TiN Hard Coating on 316L Stainless Steel

A dense Al{sub 2}O{sub 3} interlayer was inserted into TiN to enhance the tribological and anti-corrosion properties of TiN hard coating via a hybrid process of magnetron sputtering and atomic layer deposition (ALD). The influence of the ALD-Al{sub 2}O{sub 3} layer on the microstructure, mechanical, tribological and anti-corrosion properties of TiN was examined. The TiN-Al{sub 2}O{sub 3} coating exhibits low friction coefficient and specific wear rate, due to the structure change and columnar refinement caused by the addition of amorphous ALD-Al{sub 2}O{sub 3} interlay which improves the mechanical properties of hard coating. The improved corrosion properties of TiN are attributed to the fact that the insulating ALD-Al{sub 2}O{sub 3} used as a sealing layer can prevent the corrosive chlorine ions migrating into the lower TiN layer and block the charge transport in coatings. Moreover, raising the insertion position of ALD-Al{sub 2}O{sub 3} layer away from the steel substrate results in a further increase in the anti-corrosion property of TiN-Al{sub 2}O{sub 3} composite coating.

36 MATERIALS SCIENCE↗

Shape Control of Colloidal Semiconductor Nanocrystals through Thermodynamically Driven Aggregative Growth

The optoelectronic properties of colloidal semiconductor nanocrystals (NCs) can be manipulated by changing their geometric shapes. The precise synthetic control over particle morphologies, however, has remained elusive. Conventional growth techniques rely on the kinetic assembly of atomic units, where supersaturation and precipitation processes can lead to a broad distribution of particle shapes. In this paper, we demonstrate that replacing atomic precursors with small-size nanocrystals as building blocks for larger colloids offers an easier, more predictive control over nanoparticle shape evolution. The reported growth strategy is illustrated via shape-selective syntheses of CdSe and CdS NC cubes, spheres, rods, as well as unprecedented “donut” and ring-like structures. Growth of desired particle morphologies was achieved by choosing an appropriate reaction solvent that minimizes the surface free energy through a unique shape formation. This so-called "aggregative growth mechanism" is explained using a thermodynamic model for interacting viscous colloids. We expect that this novel growth strategy will offer a viable platform for shape–selective synthesis of many inorganic colloids, providing pathways to optimizable optoelectronic materials.

36 MATERIALS SCIENCE↗

Preparing a highly degenerate Fermi gas in an optical lattice

We propose a method to prepare fermionic atoms in a three-dimensional optical lattice at unprecedentedly low temperatures and uniform filling factors. The process involves adiabatic loading of degenerate atoms into multiple energy bands of an optical lattice followed by a filtering stage whereby atoms from all but the lowest band are removed. Of critical importance is the use of a nonharmonic trapping potential to provide external confinement for the atoms. For realistic experimental parameters, this procedure will produce a Fermi gas in a lattice with a reduced temperature T/T{sub F{approx}}0.003 and an entropy per particle of s{approx}0.02 k{sub B}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic-scale control of tunneling in donor-based devices

Atomically precise donor-based quantum devices are a promising candidate for solid-state quantum computing and analog quantum simulations. However, critical challenges in atomically precise fabrication have meant systematic, atomic scale control of the tunneling rates and tunnel coupling has not been demonstrated. Here using a room temperature grown locking layer and precise control over the entire fabrication process, we reduce unintentional dopant movement while achieving high quality epitaxy in scanning tunnelling microscope (STM)-patterned devices. Using the Si(100)2 × 1 surface reconstruction as an atomically-precise ruler to characterize the tunnel gap in precision-patterned single electron transistors, we demonstrate the exponential scaling of the tunneling resistance on the tunnel gap as it is varied from 7 dimer rows to 16 dimer rows. We demonstrate the capability to reproducibly pattern devices with atomic precision and a donor-based fabrication process where atomic scale changes in the patterned tunnel gap result in the expected changes in the tunneling rates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Concerted growth and ordering of cobalt nanorod arrays as revealed by tandem in situ SAXS-XAS studies

The molecular and ensemble dynamics for the growth of hierarchical supercrystals of cobalt nanorods have been studied by in situ tandem X-ray Absorption Spectroscopy – Small Angle X-ray Scattering (XAS - SAXS). The super-crystals were obtained by reducing a Co(II) precursor under H 2 in the presence of a long chain amine and a long chain carboxylic acid. Complementary time-dependent ex situ TEM studies were also performed. The experimental data provide critical insights into the nanorod growth mechanism, and unequivocal evidence for a concerted growth-organization process. Nanorod formation involves cobalt nucleation, a fast atom by atom anisotropic growth and a slower oriented attach-ment process that continues well after cobalt reduction is complete. As a result, smectic-like ordering of the nanorods appears very early in the process, as soon as nanoparticle elongation appears, and nanorod growth takes place inside organized super-lattices, which can be regarded as mesocrystals.

36 MATERIALS SCIENCE↗

Photoionization of metastable heliumlike C 4 + ( 1 s 2 s S 1 3 ) ions: Precision study of intermediate doubly excited states

In a joint experimental and theoretical endeavor, photoionization of metastable C 4+ (1s2s 3 S 1 ) ions via intermediate levels with hollow, double-K-vacancy configurations 2s2p, 2s3p, 2p3s, 2p3d, 2s4p, 2p4s, and 2p4d has been investigated. High-resolution photon-ion merged-beams measurements were carried out with the resolving power reaching up to 25 800 which is sufficient to separate the leading fine-structure components of the 2s2p 3 P term. Many-body perturbation theory was employed to determine level-to-level cross sections for K-shell excitation with subsequent autoionization. The resonance energies were calculated with inclusion of electron correlation and radiative contributions. Their uncertainties are estimated to be below ±1 meV. Detailed balance confirms the present photoionization cross-section results by comparison with previous dielectronic-recombination measurements. Finally, the high accuracy of the theoretical transition energies together with the present experimental results qualify photoabsorption resonances in heliumlike ions as new, greatly improved energy-reference standards at synchrotron radiation facilities.

74 ATOMIC AND MOLECULAR PHYSICS↗

Novel Cooling Rate Correlations in Molten Metal Gas Atomization

The cooling rate in molten metal gas atomization is the key determining factor for the microstructure of metal powders. Mathematical expressions for cooling rates often include the melt droplet diameter and a pre-exponential factor describing the materials and gas properties. A new mathematical cooling rate correlation for rapidly solidified melt droplets is proposed based on heat flow considerations during gas atomization. The model approach takes process conditions such as gas-to-melt mass flow ratio and the initial gas temperature into account. The mathematical formulation was experimentally developed using secondary dendrite arm spacing method. For this purpose, a Cu-6wt pct Sn alloy was atomized with close-coupled (CCA) and free-fall atomization (FFA). A novel approach was made to predict the pre-exponential factor that allows the transferability to other materials. Our correlation for the cooling rate and the pre-exponential factor was validated by experimental data from the literature. The novel correlation type is valid for two different atomizing systems (FFA and CCA), suggesting that it may be applicable to entirely different gas atomization systems.

36 MATERIALS SCIENCE↗