Search NASA⌕ Search

SEARCH · Search NASA

Results for “binders”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Fillers in cementitious materials — Experience, recent advances and future potential

The paper discusses the potential of fillers in CO{sub 2} mitigation in the cement industry. A historical overview of the use of fillers is presented as well as the limits of filler use given in cement standards. Globally, limestone filler currently represents only 7% of average worldwide cement composition. The limits of the current route to adding filler in cement by means of intergrinding are discussed. An innovative technology, that compensates binder dilution by a reduction of the water required for good rheological behavior, is presented; this allows clinker replacement rates of up to 70%. The theory that enables the design of such multimodal particle size distributions with high particle packing and low-water demand is presented, and examples of its application in concrete production are given. The efficiency in terms of CO{sub 2} mitigation is demonstrated by comparing concrete formulations designed with this innovative approach with a global benchmark of current technology. New filler minerals, as well as the effects of high-filler content on production processes and on durability are also discussed.

36 MATERIALS SCIENCE↗

Unveiling micro-chemo-mechanical properties of C–(A)–S–H and other phases in blended-cement pastes

Current demand for novel highly sustainable concrete urges improving the links between chemical and mechanical effects of supplementary cementitious materials (SCMs) on the microstructure of blended-cement pastes. In this work, coupled NanoIndentation and Quantitative Energy Dispersion Spectroscopy (NI-QEDS) was applied to disclose chemo-mechanical properties of microstructure phases in systems incorporating typical dosages of fly ash, slag, metakaolin, or glass powder. For a fixed water-to-binder ratio of 0.4, the C–(A)–S–H chemistry was significantly affected by the SCMs, while its average mechanical properties varied within the limited ranges M ≈ 25–27 GPa, H ≈ 0.7–0.8 GPa and C ≈ 180–230 GPa. The SCMs further changed the arrangement of anhydrous phases and minor hydrates embedded in the C–(A)–S–H matrix, which were also characterized (e.g., Portlandite, AFm such as carboaluminates, or an hydrotalcite-like phase). Finally, engineering properties of blended-cement matrices requires tailoring both the intermix of hydrates and the rigid anhydrous SCM inclusions.

36 MATERIALS SCIENCE↗

Monitoring the internal swelling in cementitious mortars with single-sided 1H nuclear magnetic resonance

Moisture transport into concrete and mortar surfaces strongly influences the durability of structures. Transport processes are foremost controlled by the material's porosity. Cementitious materials, such as concrete and mortars, exhibit distinct changes in pore structure while drying and subsequent rewetting due to the internal shrinkage and swelling of the layered calcium-silicate hydrates. Mortars with different w/c-ratios and binders were dried and rewetted and the subsequent time dependent changes in water filled pore structure were monitored with single-sided {sup 1}H nuclear magnetic resonance. This technique combines a localized depiction of all pore water with a good time resolution. The NMR signal is split into the four pore species C-S-H interlayer water, gel pore water, interhydrate water, and capillary water by multi-exponential analysis. Two consecutive running processes in the swelling of cementitious mortars were identified and discussed based on recent models of the cement microstructure as well as its implications on the sorptivity.

36 MATERIALS SCIENCE↗

Chloride diffusivity, chloride threshold, and corrosion initiation in reinforced alkali-activated mortars: Role of calcium, alkali, and silicate content

The aim of this study is to investigate systematically the chloride diffusivity and chloride threshold of a wide range of calcium-rich and fly ash-dominated alkali-activated samples in light of their compositional differences. To this end, the effects of various fly ash (FA)-to-slag ratios, of alkali concentrations and of silicate content in the activator were investigated. The electrochemical aspects of the passive samples were also assessed. Results show the prominent role of calcium in the matrix to reduce the chloride diffusivity. While higher alkali concentration increased the porosity and chloride diffusivities in general, lower modulus ratios provided considerably better performance in the FA-dominated samples. Chloride threshold values range between 0.19 (wt% binder mass) for calcium-rich mortars fabricated at low levels of alkalinities and 0.69 for FA-dominated mortars fabricated with highly alkaline activators. Half-cell potential and polarization resistance of alkali-activated samples were in general lower than their Portland cement counterparts.

36 MATERIALS SCIENCE↗

Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content

3D printing with cementitious materials is an emerging technology and provides an active area of research. Despite this, there are only limited studies that examine the pumping behaviour of high yield stress fluids such as printable concrete. We present a study on the rheological behaviour of 3D printable cementitious materials with different aggregate-to-binder ratios (a/b) and analyse the pumping and printing characteristics with the measured rheological parameters. We observed that an increase in a/b resulted in a significant increase of plastic viscosity, and a nominal increase in yield stress and storage modulus. The variation in plastic viscosity and yield stress with increasing aggregate content was analysed with the Krieger-Dougherty and Chateau-Ovarlez-Trung model, respectively. Also, the rheological properties of the paste rich lubrication layer during pumping were determined with the help of a tribometer. The yield stress and viscous constant of the lubrication layer increase with the increase in a/b. The pumping pressure predictions were carried out by a suitable theoretical model by considering appropriate flow conditions for different mixtures. The variation in critical height of printed elements with an increase in a/b was correlated with the observed rheological parameters.

36 MATERIALS SCIENCE↗

Autogenous formation and smart behaviors of nitrite- and nitrate-intercalated layered double hydroxides (LDHs) in Portland cement-metakaolin-dolomite blends

In this work, the influence of sodium nitrite (NaNO{sub 2}) and sodium nitrate (NaNO{sub 3}) corrosion inhibitors on the composition, structure, and chloride binding behaviors of layered double hydroxides (LDHs) formed in ternary ordinary Portland cement-metakaolin-dolomite (OPC-MK-DM) systems is studied. The results show that the nitrite and nitrate anions are preferably intercalated in the CaAl LDHs (AFm phases), but not in the MgAl LDHs (hydrotalcite-type phases) due to its limited formation in these ternary cementitious systems cured at ambient temperature. The autogenously formed nitrate- and nitrite-AFm phases are decomposed upon chloride exposure accompanied by Friedel's salts formation, potentially releasing corrosion inhibitive ions to the pore solution in a progressive manner. The NaNO{sub 2} and NaNO{sub 3} incorporation in ternary OPC-MK-DM binders marginally lowers chloride binding capacity but reduces its penetration resistance mainly due to pore coarsening. Nevertheless, a strong linear correlation can be established between the water-soluble and total chloride contents in ternary OPC-MK-DM systems, regardless of OPC replacement level and corrosion inhibitor incorporation.

36 MATERIALS SCIENCE↗

Inhibition mechanisms of steel slag on the early-age hydration of cement

Steel slag inhibits the early-age hydration of cement. However, its mechanism is still unclear. In this paper, the early-age hydration kinetics and the evolution of the solid phases, aqueous species and microstructures in a cement-steel slag composite binder are investigated to explore how steel slag inhibits the early-age hydration of cement. Two novel phenomena are found: (1) steel slag slows the depletion of gypsum and reduces the formation of ettringite, and (2) steel slag significantly inhibits the precipitation of CH and CSH. The results show that the addition of steel slag increases the Ca concentration in the pore solution, reduces the supersaturation of the pore solution with respect to CH and inhibits the nucleation and growth of CSH. Based on the above results, the retardation mechanisms of steel slag on the initial setting of cement paste are explained.

36 MATERIALS SCIENCE↗

Hydration of potassium citrate-activated BOF slag

Basic Oxygen Furnace (BOF) slag is currently utilized with low-grade applications or landfilled. Here, we investigate a novel route to upgrade BOF slag to a high-performance binder by chemical activation with tri-potassium citrate. The impact of tri-potassium citrate on hydration and phase assemblage of BOF slag is analyzed with a multi-technique approach. Results reveal that the addition of tri-potassium citrate considerably enhances the reactivity of brownmillerite and accelerates the hydration of belite at early ages. The majority of brownmillerite hydrates within 24 h, and the reaction kinetics is controlled by the activator dosage. The main products of BOF slag hydration are siliceous hydrogarnet and C-S-H gel. Acting as a strong water reducer, tri-potassium citrate enables the manufacture of slag pastes with high compressive strength (up to 75 MPa at 28 days) and low porosity. Leaching of heavy metals from the slag pastes fulfills the Dutch Soil Quality Decree limits.

36 MATERIALS SCIENCE↗

Influence of CaO/FeO ratio on the formation mechanism and properties of alkali-activated Fe-rich slags

Highlights: • Effect of the CaO/FeO molar ratio in alkali-activated Fe-rich slags is unraveled. • Low CaO/FeO molar ratios enhance the early kinetics and compressive strength. • Reaction extent and strength further increase with higher CaO/FeO ratio after 7 days. • Fe{sup 2+}-trioctahedral layers of the binder are hydroxylated and in a silicate phase. • The final strength is determined by the influence of Ca on the reaction products. In the search for CO{sub 2} mitigating cement technologies, alkali-activated Fe-rich slags present a possible alternative. The influence of the chemical composition of the synthetic Fe-silicate slag on the reaction mechanisms is assessed by varying the CaO/FeO molar ratio. The alkali-activated Fe-rich slags consist of trioctahedral layers that are shown to be hydroxylated and in contact with silicates, in a similar way to phyllosilicate minerals. The formation of this phyllosilicate-like structure is hindered during the first days for samples with high CaO/FeO ratios, because of the partial incorporation of Ca in the trioctahedral layers. At later ages, the samples with higher CaO/FeO ratios gain in reaction extent, to exceed the reaction extent of low CaO/FeO ratios at 28 days and beyond. The increase in compressive strength is even more pronounced than the effect on the reaction extent, which underlines the importance of Ca on the inherent strength of the binding phases.

36 MATERIALS SCIENCE↗

Concurrent reaction-bonded joining and densification of additively manufactured silicon carbide by liquid silicon infiltration

Here, in this study, additive-manufactured silicon carbide preforms were joined and densified by reaction bonding via liquid silicon infiltration. The silicon carbide preforms were first printed by binder jetting additive manufacturing. To demonstrate concurrent joining and densification, two preforms with carbon or parchment papers at the interface were concurrently joined and infiltrated by liquid silicon. Results showed a robust interface with thicknesses ranging from 150 to 500 µm, depending on the paper type and the number of paper layers. High-energy synchrotron X-ray revealed that β-phase silicon carbide was formed inside the interface. Finally, two additively manufactured samples with complicated channel geometry were successfully joined. Energy dispersive spectroscopy of the interface of the channeled samples showed a consistent and robust joining. This concurrent approach of joining and densification enables efficiency improvement of fabricating silicon carbide parts with complicated geometries and widens geometry freedom for additive manufacturing of silicon carbide.

36 MATERIALS SCIENCE↗

Synthesis and optimized formulation for high-capacity manganese fluoride (MnF 2 ) electrodes for lithium-ion batteries

Electrochemical activity of poorly conductive metal fluorides in Li-ion batteries is contingent on their nanostructuration to reduce diffusion lengths and increase reaction kinetics. In that regard, we optimize the synthesis and electrode formulation of MnF 2 to enable sufficient electrochemical activity required to study its electrochemical conversion reaction mechanism. Solvothermal synthesis in a water–ethanol mixture (1:1 Vol.), using Mn acetate and a slight excess of hydrofluoric acid (HF), results in pure phase, nanosized (˜30 nm diameter) rutile-type MnF 2 ( P 4 2 /mnm). High energy ball-milling of MnF2–carbon mixtures leads to an amorphization of MnF 2 and its partial phase transformation to the α-PbO 2 -type structure, without significant improvement of the electrochemical performance. Changing the electrode binder, however, from typical polyvinylidene fluoride (PVDF) to water-soluble Na-alginate, leads to a significant improvement of the reversibility of the electrochemical reaction. Here, we attribute this drastic improvement to the improved adherence and homogeneity of the electrode film prepared with Na-alginate.

25 ENERGY STORAGE↗

Determinants of BH3 Binding Specificity for Mcl-1 versus Bcl-x[subscript L]

Interactions among Bcl-2 family proteins are important for regulating apoptosis. Prosurvival members of the family interact with proapoptotic BH3 (Bcl-2-homology-3)-only members, inhibiting execution of cell death through the mitochondrial pathway. Structurally, this interaction is mediated by binding of the {alpha}-helical BH3 region of the proapoptotic proteins to a conserved hydrophobic groove on the prosurvival proteins. Native BH3-only proteins exhibit selectivity in binding prosurvival members, as do small molecules that block these interactions. Understanding the sequence and structural basis of interaction specificity in this family is important, as it may allow the prediction of new Bcl-2 family associations and/or the design of new classes of selective inhibitors to serve as reagents or therapeutics. In this work, we used two complementary techniques - yeast surface display screening from combinatorial peptide libraries and SPOT peptide array analysis - to elucidate specificity determinants for binding to Bcl-x{sub L} versus Mcl-1, two prominent prosurvival proteins. We screened a randomized library and identified BH3 peptides that bound to either Mcl-1 or Bcl-x{sub L} selectively or to both with high affinity. The peptides competed with native ligands for binding into the conserved hydrophobic groove, as illustrated in detail by a crystal structure of a specific peptide bound to Mcl-1. Mcl-1-selective peptides from the screen were highly specific for binding Mcl-1 in preference to Bcl-x{sub L}, Bcl-2, Bcl-w, and Bfl-1, whereas Bcl-x{sub L}-selective peptides showed some cross-interaction with related proteins Bcl-2 and Bcl-w. Mutational analyses using SPOT arrays revealed the effects of 170 point mutations made in the background of a peptide derived from the BH3 region of Bim, and a simple predictive model constructed using these data explained much of the specificity observed in our Mcl-1 versus Bcl-x{sub L} binders.

36 MATERIALS SCIENCE↗

Studies on in situ magnetic alignment of bonded anisotropic Nd-Fe-B alloy powders

We presented some considerations for achieving high degree of alignment in polymer bonded permanent magnets via the results of a study on in situ magnetic alignment of anisotropic Nd-Fe-B magnet powders. Contributions from effect of the alignment temperature, alignment magnetic field and the properties of the polymer on the hard magnetic properties of the bonded magnet were considered. Moreover, the thermo-rheological properties of the polymer and the response of the magnet powders to the applied magnetic field indicate that hard magnetic properties were optimized at an alignment temperature just above the melting temperature of the EVA co-polymer. This agrees with an observed correlation between the change in magnetization due to improved magnetic alignment of the anisotropic powders and the change in viscosity of the binder. Finally, manufacturing cost can be minimized by identifying optimum alignment temperatures and magnetic field strengths.

36 MATERIALS SCIENCE↗

Prediction of shock initiation thresholds and ignition probability of polymer-bonded explosives using mesoscale simulations

The design of new materials requires establishment of macroscopic measures of material performance as functions of microstructure. Traditionally, this process has been an empirical endeavor. In this paper, an approach to computationally predict the probabilistic ignition thresholds of polymer-bonded explosives (PBXs) using mesoscale simulations is developed. The simulations explicitly account for microstructure, constituent properties, and interfacial responses and capture processes responsible for the development of hotspots and damage. The specific mechanisms tracked include viscoelasticity, viscoplasticity, fracture, post-fracture contact, frictional heating, and heat conduction. The probabilistic analysis uses sets of statistically similar microstructure samples to directly mimic relevant experiments for quantification of statistical variations of material behavior due to inherent material heterogeneities. The particular thresholds and ignition probabilities predicted are expressed in James type and Walker–Wasley type relations, leading to the establishment of explicit analytical expressions for the ignition probability as function of loading. Specifically, the ignition thresholds corresponding to any given level of ignition probability and ignition probability maps are predicted for PBX 9404 for the loading regime of U p = 200–1200 m/s where U p is the particle speed. The predicted results are in good agreement with available experimental measurements. A parametric study also shows that binder properties can significantly affect the macroscopic ignition behavior of PBXs. Finally, the capability to computationally predict the macroscopic engineering material response relations out of material microstructures and basic constituent and interfacial properties lends itself to the design of new materials as well as the analysis of existing materials.

36 MATERIALS SCIENCE↗

Pore structure development in oxidized IG-110 nuclear graphite

The oxidation-induced porosity development in nuclear graphite has great effect on its mechanical behavior, thus it is very important to understand the pore structure development of nuclear graphite during oxidation. This paper reports on the oxidation kinetics of grade IG-110 nuclear graphite and the porosity development in oxidized samples. The distribution of the oxidized layer in IG-110 specimens oxidized at 600-750 C was studied using optical microscopy coupled with automated image analysis technique, and the mechanism of porosity development was determined. The thickness of oxidized layer decreased with the oxidation temperature but was independent of the weight loss level. Oxidation caused consumption of graphite structure and development of porosity, which was initiated from the binder phase. Statistical analysis indicated that generation and growth of pores was dominant at low temperatures, while merging and collapse of pores was the main effect at high temperatures. Compared with medium-grained PCEA graphite, the fine-grained IG-110 graphite demonstrates deeper penetration of the oxidant because of its higher pore density and lager porosity.

36 MATERIALS SCIENCE↗

A three-dimensional Macroporous Cu/SnO2 composite anode sheet prepared via a novel method

Macroporous Cu/SnO2 composite anode sheets were prepared by a novel method which is based on slurry blending, tape casting, sintering, and reducing of metal oxides. Such composite Cu/SnO2 anode sheets have no conducting carbons and binders, and show improved discharge capacity and cycle life than the SnO2 electrode from conventional tape-casting method on Cu foil. This methodology produces limited wastes and is also adaptable to many other materials. It is easy for industrial scale production. With the optimization of particle size of the metal oxide, pore size, pore volume and other factors, this kind of macroporous Cu/SnO2 composite anode sheets could give significantly improved capacity and cycle life.

36 MATERIALS SCIENCE↗

Quantifying gas generation from slurries used in fabrication of Si-containing electrodes for lithium-ion cells

The high capacity of silicon motivates its use as anode material for Li-ion batteries. While such Si-based electrodes are typically processed from aqueous slurries, elemental silicon is highly susceptible to hydrolysis, yielding flammable hydrogen gas as a byproduct. This gassing can present numerous safety and quality concerns for scaling up of the production. In this study we describe a method to quantify the volume of gases generated using the Archimedes principle. We show that the gas volumes are affected by various factors, which include the characteristics of the electrode slurry and attributes (particle size, surface coatings) of the silicon powders. A catalytic effect on gas evolution is observed when a lithiated polycarboxylate binder is present in the solution. On the other hand, negligible gas generation is observed in electrode slurries containing the N -methyl-2-pyrrolidone (NMP) solvent, which could be considered as an alternative to the water-based processes presently under consideration. Lastly, our study can be used as a guide for the development of slurry mixtures that can mitigate the safety concerns associated with the silicon-electrode fabrication process.

25 ENERGY STORAGE↗

Microscopic characterisation of old mortars from the Santa Maria Church in Evora

Evora Cathedral (one of the most emblematic monuments of Evora - Portugal) has suffered several conservation and restoration interventions through the ages, without, however, any type of previous knowledge about mortars and materials used. This work was carried out in order to identify the mortar's composition in different locations, which were attributed to different construction or conservation periods. The characterisation methodology involved a multidisciplinary set of chemical, physical, microstructural and mechanical techniques, and gave special attention to the use of microstructural characterisation techniques, particularly petrographical analysis and scanning electron microscopy for the identification of the mortar's constituents as well as in the evaluation of the state of conservation. The test results showed that two types of aerial binders were used, dolomitic and calcitic limes, the former being predominant. The aggregates used have a siliceous nature and are similar in composition to the granodiorites of the region around Evora. The mortars differ in the aggregate contents and, in some cases, crushed bricks were used as an additive.

36 MATERIALS SCIENCE↗