Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Relating FTS Catalyst Properties to Performance

During the reporting period June 23, 2011 to August 31, 2013, CAER researchers carried out research in two areas of fundamental importance to the topic of cobalt-based Fischer-Tropsch Synthesis (FTS): promoters and stability. The first area was research into possible substitute promoters that might be used to replace the expensive promoters (e.g., Pt, Re, and Ru) that are commonly used. To that end, three separate investigations were carried out. Due to the strong support interaction of γ-Al2O3 with cobalt, metal promoters are commonly added to commercial FTS catalysts to facilitate the reduction of cobalt oxides and thereby boost active surface cobalt metal sites. To date, the metal promoters examined have been those up to and including Group 11. Because two Group 11 promoters (i.e., Ag and Au) were identified to exhibit positive impacts on conversion, selectivity, or both, research was undertaken to explore metals in Groups 12 - 14. The three metals selected for this purpose were Cd, In, and Sn. At a higher loading of 25%Co on alumina, 1% addition of Cd, In, or Sn was found to-on average-facilitate reduction by promoting a heterogeneous distribution of cobalt consisting of larger lesser interacting cobalt clusters and smaller strongly interacting cobalt species. The lesser interacting species were identified in TPR profiles, where a sharp low temperature peak occurred for the reduction of larger, weakly interacting, CoO species. In XANES, the Cd, In, and Sn promoters were found to exist as oxides, whereas typical promoters (e.g., Re, Ru, Pt) were previously determined to exist in an metallic state in atomic coordination with cobalt. The larger cobalt clusters significantly decreased the active site density relative to the unpromoted 25%Co/Al2O3 catalyst. Decreasing the cobalt loading to 15%Co eliminated the large non-interacting species. The TPR peak for reduction of strongly interacting CoO in the Cd promoted catalyst occurred at a measurably lower temperature than in the unpromoted catalyst. Nevertheless, the Co clusters remained slightly larger, on average, in comparison with the unpromoted 15%Co/Al2O3 reference catalyst. None of the promoted catalysts (i.e., with Cd, In, or Sn) exhibited surface Co0 site densities higher than that of the unpromoted catalyst. In activity testing, the activities were even much lower than what was expected from the H2-TPD results. Two possible explanations were proposed: (1) the promoters may be located on the surfaces of cobalt particles, blocking surface Co0 but being able to desorb hydrogen or (2) the promoters may facilitate Co oxidation during FTS, as previously observed by Huffman and coworkers when K was added to cobalt catalysts.

Zirconia↗

A simple synthesis method of sulfur-free Fe-N-C catalyst witih high ORR activity

To try to deconvolute which factors affect the activity and durability of metal-nitrogen-carbon (M-N-C) type non-precious catalysts for oxygen reduction reaction (ORR), M-N-C catalysts based on ion chloride, polyaniline (PANI) and Ketjen Black carbon support were synthesized using different synthetic conditions. The catalysts were characterized electrochemically and tested as cathodes for Hydrogen fuel cells. PANI is usually chemically oxidative polymerized using ammonium persulfate (APS) as oxidant. To eliminate sulfur in the synthesized catalysts, a simple synthesis method using ion chloride as oxidant for aniline polymerization was developed. Two different aniline polymerization conditions led to very different product morphologies. Synthesized at low initial proton concentration, the final product was composed of dense micrometer sized particles. A decomposable salt was found to be able to prohibit PANI cross linking during the drying and annealing process and thus led to porous product. The porous catalyst has much higher ORR activity than the dense product due to more accessible active sites. Synthesized at high proton concentration, the catalyst appeared to be porous. The decomposable salt treatment did not make too much improvement in the porous structure and electrochemical activity. However, fuel cell testing using air as cathode feeder indicates that the salt treatment improves mass transfer in the cathode layer. Catalyst synthesized using this simple method has performance comparable to our state-of-the art catalyst synthesized in a much more complicated procedure. The factor that sulfur sources are completely eliminated in the synthesis suggests that sulfur is not necessary for the ORR catalysis activity.

30 DIRECT ENERGY CONVERSION↗

Mercury oxidation over a vanadia-based selective catalytic reduction catalyst

The process of the reaction among elemental mercury (Hg{sup 0}) and reactive flue gas components across the selective catalytic reduction (SCR) catalyst was studied in a laboratory-scale reactor. Prepared vanadia-based SCR catalysts were characterized and analyzed to understand the potential reaction pathways. Mercury oxidation was observed when pro-exposure of the SCR catalyst to HCl, followed by passing through Hg{sup 0}/N{sub 2} in the absence of gas-phase HCl. At testing conditions, Hg{sup 0} was found to desorb from the catalyst surface by adding HCl to the gas stream, which implies that HCl adsorption onto the SCR catalyst is strong relative to the mercury. Surface analysis verified the absorption of HCl onto the SCR catalysts, and the potential reaction pathways were proposed. Indeed, the monomeric vanadyl sites on the catalyst surface were found to be responsible for the adsorption of both Hg{sup 0} and HCl, which means they are active for mercury oxidation. Furthermore, the detailed Langmuir-Hinshelwood mechanism was proposed to explain the mercury oxidation on the SCR catalyst, where reactive Cl generated from adsorbed HCl reacts with adjacent Hg{sup 0}. 44 refs., 10 figs.

01 COAL, LIGNITE, AND PEAT↗

Oxygen evolution co-catalysts at fuel cell cathodes for degradation mitigation during simulated start up shut down procedures

We herein report a methodology which uses an oxygen evolution reaction (OER) co-catalyst, such as Ru and RuO2 together with a highly active ORR catalyst. The co-catalyst is applied in the cathode layer with loadings of 0.035 - 0.04 mgRu/cm2 and is uniformly mixed with the ORR catalyst prior to electrode preparation. Oxygen evolution catalysts (OER) like Ru/C and RuO2/C mixed with ORR catalysts enhance the oxidation of water/OH- to oxygen and therefore provide significant protection of other redox active species at high cathode potentials Our measurements indicate that loss in ECSA, carbon support and activity for ORR catalyst combined with OER was significantly reduced as compared to an unprotected catalyst layer.

30 DIRECT ENERGY CONVERSION↗

Low‐PGM and PGM‐Free Catalysts for Proton Exchange Membrane Fuel Cells: Stability Challenges and Material Solutions

Abstract Fuel cells as an attractive clean energy technology have recently regained popularity in academia, government, and industry. In a mainstream proton exchange membrane (PEM) fuel cell, platinum‐group‐metal (PGM)‐based catalysts account for ≈50% of the projected total cost for large‐scale production. To lower the cost, two materials‐based strategies have been pursued: 1) to decrease PGM catalyst usage (so‐called low‐PGM catalysts), and 2) to develop alternative PGM‐free catalysts. Grand stability challenges exist when PGM catalyst loading is decreased in a membrane electrode assembly (MEA)—the power generation unit of a PEM fuel cell—or when PGM‐free catalysts are integrated into an MEA. More importantly, there is a significant knowledge gap between materials innovation and device integration. For example, high‐performance electrocatalysts usually demonstrate undesired quick degradation in MEAs. This issue significantly limits the development of PEM fuel cells. Herein, recent progress in understanding the degradation of low‐PGM and PGM‐free catalysts in fuel cell MEAs and materials‐based solutions to address these issues are reviewed. The key factors that degrade the MEA performance are highlighted. Innovative, emerging material concepts and development of low‐PGM and PGM‐free catalysts are discussed.

Du, Lei↗

Surface Engineering of 3D Gas Diffusion Electrodes for High‐Performance H 2 Production with Nonprecious Metal Catalysts

Abstract In this work, a methodology is demonstrated to engineer gas diffusion electrodes for nonprecious metal catalysts. Highly active transition metal phosphides are prepared on carbon‐based gas diffusion electrodes with low catalyst loadings by modifying the O/C ratio at the surface of the electrode. These nonprecious metal catalysts yield extraordinary performance as measured by low overpotentials (51 mV at −10 mA cm −2 ), unprecedented mass activities (>800 A g −1 at 100 mV overpotential), high turnover frequencies (6.96 H 2 s −1 at 100 mV overpotential), and high durability for a precious metal‐free catalyst in acidic media. It is found that a high O/C ratio induces a more hydrophilic surface directly impacting the morphology of the CoP catalyst. The improved hydrophilicity, stemming from introduced oxyl groups on the carbon electrode, creates an electrode surface that yields a well‐distributed growth of cobalt electrodeposits and thus a well‐dispersed catalyst layer with high surface area upon phosphidation. This report demonstrates the high‐performance achievable by CoP at low loadings which facilitates further cost reduction, an important part of enabling the large‐scale commercialization of non‐platinum group metal catalysts. The fabrication strategies described herein offer a pathway to lower catalyst loading while achieving high efficiency and promising stability on a 3D electrode.

Sanchez, Joel↗

Roles of interaction between components in CZZA/HZSM-5 catalyst for dimethyl ether synthesis via CO 2 hydrogenation

The roles of interaction between two catalyst components in CuO–ZnO–ZrO 2 –Al 2 O 3 (CZZA)/HZSM-5 bifunctional catalyst for dimethyl ether (DME) synthesis via carbon dioxide hydrogenation were investigated. It was found that CZZA catalyst showed excellent stability during methanol (MeOH) synthesis for 100 h, while there was a severe loss of catalytic activity in the bifunctional catalyst for DME synthesis. So, the effects of different degrees of intimacy of two catalyst components were studied for DME synthesis, including mixed and separated modes. For the mixed mode, the particle size of catalysts and the amount of reaction intermediates were proven to influence the catalyst deactivation. For the separated mode, the catalysts showed rapid deactivation within a short time. Various characterizations indicated that the remarkable deactivation of separated mode was mainly caused by the decrease of copper active centers (e.g., sintering and oxidation) and blockage of acid sites via increased coke deposition on HZSM-5.

42 ENGINEERING↗

Does Selectivity of Molecular Catalysts Change with Time? Polymerization Imaged by Single‐Molecule Spectroscopy

Abstract The chemoselectivity of molecular catalysts underpins much of modern synthetic organic chemistry. However, little is known about the selectivity of individual catalysts because this single‐catalyst‐level behavior is hidden by the bulk catalytic behavior. Here, for the first time, the selectivity of individual molecular catalysts for two different reactions is imaged in real time at the single‐catalyst level. This imaging is achieved through fluorescence microscopy paired with spectral probes that produce a snapshot of the instantaneous chemoselectivity of a single catalyst for either a single‐chain‐elongation or a single‐chain‐termination event during ruthenium‐catalyzed polymerization. Superresolution imaging of multiple selectivity events, each at a different single‐molecular ruthenium catalyst, indicates that catalyst selectivity may be unexpectedly spatially and time‐variable.

Garcia, IV, Antonio↗

Does Selectivity of Molecular Catalysts Change with Time? Polymerization Imaged by Single-Molecule Spectroscopy

The chemoselectivity of molecular catalysts underpins much of modern synthetic organic chemistry. However, little is known about the selectivity of individual catalysts because this single-catalyst-level behavior is hidden by the bulk catalytic behavior. In this work, for the first time, the selectivity of individual molecular catalysts for two different reactions is imaged in real time at the single-catalyst level. This imaging is achieved through fluorescence microscopy paired with spectral probes that produce a snapshot of the instantaneous chemoselectivity of a single catalyst for either a single-chain-elongation or a single-chain-termination event during ruthenium-catalyzed polymerization. Superresolution imaging of multiple selectivity events, each at a different single-molecular ruthenium catalyst, indicates that catalyst selectivity may be unexpectedly spatially and time-variable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Co 2 C in ZnO-promoted Co Catalysts for Alcohol Synthesis from Syngas

Controlling selectivity is a key goal in the design of a heterogeneous catalyst. Herein, we present detailed characterization and activity of silica–supported cobalt catalysts modified by atomic layer deposition of ZnO. After reduction, the resulting catalysts exhibit substantial selectivity towards alcohol production during CO hydrogenation compared to catalysts containing only cobalt. The prepared catalysts have up to 46 % selectivity toward alcohols with 39 % of the alcohols corresponding to ethanol and other higher alcohols, albeit with reduced activity. In situ characterization of the catalyst by X–ray diffraction and X–ray absorption spectroscopy reveals details on the structural evolution in syngas, CO+H 2 , and shows that ZnO promotion of Co results in the formation of Co 2 C under catalytic conditions. A mechanism is proposed, supported by density functional theory calculations, which explains Co 2 C formation by the blocking of Co step sites by Zn species. The ZnO acts a dual promoter both by facilitating Co 2 C formation and by modifying the resulting Co 2 C. In conclusion, the Co 2 C formed from the ZnOpromoted Co catalysts displays improved thermal stability and selectivity compared with similar Co 2 C catalysts without Zn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Support Effects of ZnO-Promoted Co Catalysts for Syngas Conversion to Alcohols Using Atomic Layer Deposition

Co 2 C, an emerging catalyst for the conversion of syngas to oxygenates, shows support-sensitive behavior that has not yet been fully explained. In this work, we characterize Co catalysts modified with ZnO atomic layer deposition on SiO 2 , carbon, CeO 2 , and Al 2 O 3 supports. We find that under syngas conditions, ZnO-promoted Co transforms into Co 2 C on SiO 2 , carbon, and CeO 2 , but not on Al 2 O 3 . Moreover, the support affects the extent of carburization: while the SiO 2 -supported catalyst carburizes completely, carbon- and CeO 2 -supported catalysts show incomplete conversion of Co to Co 2 C. These three catalysts also exhibit different oxygenate selectivities. In contrast, the modified Al 2 O 3 -supported catalyst retains the Fischer-Tropsch catalytic properties of metallic Co. By depositing increasing amounts of Al 2 O 3 by ALD on the SiO 2 support, decreasing Co 2 C formation and oxygenate selectivity occurs. In-situ XANES reveals that Al 2 O 3 prevents Co 2 C formation by enabling the ZnO to restructure into ZnAl 2 O 4 during reduction. Thus, in addition to modifying the active catalyst phase, the promoter can also strongly interact with the support, significantly impacting catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward Rational Design of Nickel Catalysts for Thermocatalytic Decomposition of Methane for Carbon Dioxide-Free Hydrogen and Value-Added Carbon Co-Product: A Review

Thermocatalytic decomposition of methane provides opportunities for hydrogen (H2) production with no emission of carbon dioxide. However, high-value carbon products need to be produced for economic deployment of thermocatalytic decomposition and to achieve a minimum H 2 selling price below the U.S, Department of Energy target of $ 1/kg H 2 . In this review, we re-evaluate data on catalyst development reported in the literature and propose correlations between catalyst characteristics, catalytic stability, and properties of carbon co-products. In the first part of the review, growth mechanisms for carbon nanotubes using state-of-the-art chemical vapor deposition are reviewed to catalog the effects of catalyst characteristics, the influence of carbon sources, interactions between metal particles and supports, and metal particle sizes on carbon growth. In the second part, representative developments in mono-, bi-, and tri-metallic nickel catalysts are highlighted. We present kinetic analysis of reactions catalyzed by mono-metallic nickel catalysts, which generates a correlation between metal particle size and catalyst stability. Rational design of Ni-based catalysts for TCD of methane requires attention to the size of the metal particle and effective normalization of the reaction rates. Further attention to the distribution of the metal particle sizes may help identify catalyst properties that contribute longevity and selectivity to processes that use them. While it is tempting to focus on the highest valued carbon products (e.g., CNTs and CFs), analysis of the markets for other carbon products suggests that a more flexible approach may generate comparable returns without the risk associated with specialization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TiO 2 Supported gold–palladium catalyst for effective syngas production from methane partial oxidation

The CO and H 2 (syngas) production from methane partial oxidation (MPO) using TiO 2 supported Au-Pd bimetallic catalysts are discussed. The supported Au, Pd and Au-Pd bimetallic nanoparticles were prepared by an incipient wetness impregnation or co-impregnation method and were characterized. The supported Au-Pd catalyst was selective for reforming and was more active compared to bare TiO 2 , TiO 2 supported Au only, or Pd only catalysts. The catalyst properties before and after MPO reaction were investigated, including the stability of the TiO 2 support, and the stability of Au and Pd nanoparticles. The supported Au-Pd catalyst has the highest TON (TON H2 = 23 at 650 °C), compared to supported Au catalyst (TON H2 < 1) and supported Pd catalyst (TON H2 < 1). Based on the analysis of outlet gases from the MPO reaction in a flow reactor, synergetic effects between Au and Pd, where Pd activates CH bonds while gold modulates the behavior of oxygen at the catalyst surface, are shown to contribute to MPO. Additionally, the Au-Pd/TiO 2 material shows long-term activity (>12 h) for the MPO reaction at 600 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A highly efficient catalyst of palygorskite-supported manganese oxide for formaldehyde oxidation at ambient and low temperature: Performance, mechanism and reaction kinetics

A series of palygorskite-supported manganese oxide (MnO x /PG) catalysts were prepd. by a pptn. method using different manganese precursor. The as-prepared MnO x /PG catalysts were used to evaluate the catalytic oxidn. of HCHO and characterized by BET, XRD, TG, Raman spectroscopy, TEM, H 2 -TPR, XPS, and chemical titration. The results showed that the crystalline phase, distribution and Mn valence states of MnO x on the surface of PG depended on the precursors. Birnessite-type manganese oxide (δ-MnO 2 ) formed and uniformly coated on the surface of PG when potassium permanganate (PP) was used as the precursor. The MnO x /PG-PP catalyst showed the best catalytic activity for HCHO removal at low temp. among these catalysts and achieved complete HCHO conversion at 150 °C. More importantly, the dynamic single-pass removal efficiency of MnO x /PG-PP catalyst for ppm-level HCHO oxidn. was as high as 95% under high GHSV (300 L/g·h) at ambient temp. MnO x /PG-PP catalyst also exhibited excellent cycling stability and long-term activity at low and ambient temp. The kinetic results of MnO x /PG-PP catalyst showed that the oxidn. of HCHO followed the Mars-van Krevelen mechanism. The possible reaction pathway of HCHO oxidn. was proposed based on in situ DRIFTS and TPSR studies. The large sp. surface area, highly distributed active component, a high proportion of Mn 4+ species, and lattice oxygen content are responsible for the high catalytic activity of MnO x /PG-PP for oxidn. of formaldehyde. This work developed a natural mineral supported manganese oxide as an inexpensive and efficient catalyst for the purifn. of HCHO in industrial or indoor air environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of catalyst crystal structure on the oxidation of propene to acrolein

Bismuth molybdate is realized to be active for the oxidation of propene to acrolein and its activity can be altered by substitution of other elements (e.g. Fe, V, W) into the scheelite phase of α-Bi 2 Mo 3 O 12 . Our report has further revealed that the apparent activation energy for acrolein formation correlates with the band gap of the catalyst measured at reaction temperature. It is, therefore, of interest to establish to how the crystal structure of the catalyst affects the activation energy. We report here an investigation of propene oxidation conducted over Bi, Mo, V oxides having the aurivillius structure with the composition Bi 4 V 2- x Mo x O 11+ x /2 ( x = 0-1) and compare them with oxides having the scheelite structure with the composition Bi 2- x /3 Mo x V 1- x O 12 ( x = 0-1). The aurivillius-phase catalysts again show a correlation between the apparent activation energy and the band gap of the oxide, and the only difference being that for a given band gap, the apparent activation energy for the aurivillius-phase catalysts is 1.5 kcal/mol higher than that for the scheelite-phase catalysts. This difference is attributed to the lower heat of propene adsorption on the aurivillius-phase catalysts. An additional finding is that for catalysts with band gaps greater than ~2.1 eV, the acrolein selectivity is ~75% for the conditions used and independent of the propene conversion. When the band gap falls below ~2.1 eV, the intrinsic selectivity to acrolein decreases rapidly and then decreases further with increasing propene conversion. This pattern shows that when the activity of oxygen atoms at the catalyst surface becomes very high, two processes become more rapid - the oxidation of the intermediate from which acrolein is formed and the sequential combustion of acrolein to CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward Rational Design of Supported Vanadia Catalysts of Lignin Conversion to Phenol

In sustainable chemical engineering, catalytic upgrading of lignocellulosic biomass has recently gained attention for producing renewable platform chemicals. To achieve maximal biomass utilization, upgrading the underutilized lignin components is essential. Among various catalysts for lignin upgrading, supported vanadia (V2O5) catalysts are promising because of their cost-effectiveness and tunability of either dopant metals or catalyst supports. Here, computational studies are conducted to derive rational design guidelines of supported V2O5 catalysts for accomplishing the high catalytic activity of lignin upgrading to phenol, a key compound for producing bioplastics and biofuel blendstocks. Guaiacol was used as the model compound since it comprises the highest portion of depolymerized lignin. Computational mechanistic studies for the catalytic guaiacol conversion to phenol were performed for the V2O5 catalysts on Titania (TiO2) and silica (SiO2) to explain higher experimental phenol yields on V2O5/SiO2 than V2O5/TiO2. The hydrogen migration from the methoxy group to the aryl ring was identified as a rate-determining step, and the overall activation energies on the two catalysts were compared. A structural analysis was carried out for the catalysts and rate-determining transition states to gain further insights from mechanistic studies. It was concluded that the tilt angle of the aryl group in the hydrogen migration transition state is a key descriptor determining the catalytic activity of phenol formation. These features correlate well with activation energies and experimental phenol yields, indicating that they provide design guidelines for supported metal catalysts for lignin upgrading before experiments.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

Waste to worth: A high-temperature water-gas shift magnetite catalyst with encapsulated core-shell structure from coal fly ash

In this paper, we demonstrate the synthesis of magnetite-based, encapsulated catalyst with a core-shell structure from coal fly ash, an industrial solid waste, and its application to industrially important high temperature water-gas shift reaction (HT-WGSR). The catalyst precursor was first synthesized through a leaching-precipitation-hydrothermal process, leading to the formation of a nanosheet-like hematite precursor consisting of Fe 3+ as primary element and minor cations including Al 3+ , Mg 2+ and other cations (e.g. Ca 2+ and Ti 4+ ). During the WGSR, the nanosheets broke into smaller particles with a core of magnetite with a diameter of ~20 nm, whereas the inherent impurity elements were activated and migrated to the outer surface forming a shell with a thickness of ~4 nm. Due to the protection of shell, the as-synthesized catalyst exhibited improved activity, thermal stability and long-term durability for HT-WGSR at 400 °C and 450 °C. Compared to the pure hematite, this catalyst exhibited much higher activity and stability, i.e., increased CO conversion and decreased deactivation rate constant, by a factor of four and three, respectively. Additionally, through a bottom-up reverse synthesis, we have confirmed that Al 3+ functioned as a textual promoter enhancing the interfacial area of the catalyst. On the other hand, the presence of minor impurity elements, in particular 2.58 wt% Mg 2+ and 0.18 wt% Ti 4+ , were found to increase the basicity, and promote the adsorption rate of CO, the redox of catalysts, and the alteration of the reaction mechanism from regenerative to associative with the formation of a strong intermediate formate. Finally, this study not only opens a new direction on the valorization of solid waste into high-value catalysts, promoting the sustainability of solid waste management, but also provides an alternative, cost-effective and scalable approach for the design and fine-tuning of encapsulated catalysts.

01 COAL, LIGNITE, AND PEAT↗