Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

ASSESSING THE ROLE OF SPIN NOISE IN THE PRECISION TIMING OF MILLISECOND PULSARS

We investigate rotational spin noise (referred to as timing noise) in non-accreting pulsars: millisecond pulsars, canonical pulsars, and magnetars. Particular attention is placed on quantifying the strength and non-stationarity of timing noise in millisecond pulsars because the long-term stability of these objects is required to detect nanohertz gravitational radiation. We show that a single scaling law is sufficient to characterize timing noise in millisecond and canonical pulsars while the same scaling law underestimates the levels of timing noise in magnetars. The scaling law, along with a detailed study of the millisecond pulsar B1937+21, leads us to conclude that timing noise is latent in most millisecond pulsars and will be measurable in many objects when better arrival time estimates are obtained over long data spans. The sensitivity of a pulsar timing array to gravitational radiation is strongly affected by any timing noise. We conclude that detection of proposed gravitational wave backgrounds will require the analysis of more objects than previously suggested over data spans that depend on the spectra of both the gravitational wave background and of the timing noise. It is imperative to find additional millisecond pulsars in current and future surveys in order to reduce the effects of timing noise.

79 ASTRONOMY AND ASTROPHYSICS↗

Halo-independent direct detection of momentum-dependent dark matter

We show that the momentum dependence of dark matter interactions with nuclei can be probed in direct detection experiments without knowledge of the dark matter velocity distribution. This is one of the few properties of DM microphysics that can be determined with direct detection alone, given a signal of dark matter in multiple direct detection experiments with different targets. Long-range interactions arising from the exchange of a light mediator are one example of momentum-dependent DM. For data produced from the exchange of a massless mediator we find for example that the mediator mass can be constrained to be ∼< 10 MeV for DM in the 20-1000 GeV range in a halo-independent manner.

79 ASTRONOMY AND ASTROPHYSICS↗

FlameNEST: explicit profile likelihoods with the Noble Element Simulation Technique

We present FlameNEST, a framework providing explicit likelihood evaluations in noble element particle detectors using data-driven models from the Noble Element Simulation Technique. FlameNEST provides a way to perform statistical analyses on real data with no dependence on large, computationally expensive Monte Carlo simulations by evaluating the likelihood on an event-by-event basis using analytic probability elements convolved together in a single TensorFlow multiplication. Furthermore, this robust framework creates opportunities for simple inter-collaboration analyses which will be fundamental for the future of experimental dark matter physics.

47 OTHER INSTRUMENTATION↗

Low-energy electronic structure of perovskite and Ruddlesden-Popper semiconductors in the Ba-Zr-S system probed by bond-selective polarized x-ray absorption spectroscopy, infrared reflectivity, and Raman scattering

Chalcogenides in perovskite and the related layered Ruddlesden-Popper crystal structures ( chalcogenide perovskites for brevity) are an exciting family of semiconductors but remain experimentally little studied. Chalcogenide perovskites share crystal structures and some physical properties with ionic compounds such as oxide and halide perovskites, but the metal-chalcogen bonds responsible for semiconducting behavior are substantially more covalent than in these more-studied perovskites. In this study, we use complementary experimental and theoretical methods to study how the mixed ionic-covalent Zr-S bonds support the electronic structure and physical properties of perovskite BaZrS 3 and Ruddlesden-Popper Ba 3 Zr 2 S 7 . We apply theoretical methods to assign features of experimentally measured x-ray absorption spectroscopy (XAS) to particular orbital transitions, enabling a clear physical interpretation of angle-dependent, polarized XAS data measured on single-crystal samples, and an atomistic view of the covalent bonding network that facilitates charge transport. Polarized Raman measurements identify signatures of crystalline anisotropy in Ba 3 Zr 2 S 7 and enable the first assignments of mode symmetry in this material. Infrared reflectivity reveals electronic transport properties that augur well for the use of chalcogenide perovskites in optoelectronic and energy-conversion technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat capacity study of magnetoelectronic phase separation in La{sub 1-x}Sr{sub x}CoO{sub 3} single crystals.

We present a detailed investigation of the specific heat (0.35 < T < 270 K) and ordinary Hall effect (300 K) in La{sub 1?x}Sr{sub x}CoO{sub 3} single crystals at 11 doping values in the range 0.00 < x < 0.30. The data reveal a considerable amount of information on the nature of the percolation transition, the crystal and electronic structures, and, most significantly, the magnetoelectronic phase inhomogeneity that has attracted such attention in this material. The observations include a discontinuity in Debye temperature accompanying the insulator-metal transition, direct evidence for the percolative nature of this transition, and a large electron mass enhancement in the metallic state, likely due to strong electron correlation effects. The various contributions to the heat capacity are shown to provide a detailed picture of the phase-separated state and its evolution with doping and are discussed in light of prior neutron-scattering and heat capacity data. This doping dependence provides strong evidence that the phase separation is restricted to a well-defined doping range, 0.04 < x < 0.22, in agreement with a recently proposed model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and magnetocaloric properties of HoCr O 3 tuned by selective rare-earth doping

Rare-earth chromites ( R Cr O 3 ) are an important subclass of functional materials with interesting magnetic, electrical, and catalytic properties that make them promising for various applications. In this paper, we report comparisons on the structural and magnetic properties of HoCr O 3 with those of H o 0.67 T m 0.33 Cr O 3 and H o 0.67 G d 0.33 Cr O 3 powder samples, which were doped by T m 3 + (or G d 3 + ) ions at the A -site with ionic radius smaller (or larger) than that of H o 3 + ion. The structural properties of the samples were characterized by x-ray diffraction, Raman spectroscopy, and scanning electron microscopy carried out at ambient. The band gaps of the three samples were determined by analyzing their ultraviolet Vis spectra. Magnetic studies carried out from 5 K to 300 K show that the Néel temperature ( T N Cr , where C r 3 + ions order) increases with an increase in the average A -site ( R -site) ionic radius, tolerance factor, and Cr1-O1-Cr1 bond angle but decreases with an increase in the orthorhombic strain factor. In addition, the application of external hydrostatic pressure was found to enhance T N Cr of HoCr O 3 , similar to the effect observed by doping HoCr O 3 with G d 3 + ions. These changes in T N Cr with A -site doping and hydrostatic pressure are related to changes in C r 3 + - C r 3 + exchange coupling resulting from changes in the Cr1-O1-Cr1 bond angle and Cr1-O1 bond lengths, respectively. Temperature dependent paramagnetic susceptibility data of the samples was fitted to the modified Curie-Weiss law that included the Dzyloshinskii-Moriya interaction. Isothermal magnetization data showed that the magnetic behavior of the samples changes from canted antiferromagnetic at low temperatures to paramagnetic at higher temperatures. The large magnetocaloric entropy change was observed in HoCr O 3 , which was enhanced by Gd doping but lowered by Tm doping, showing its tunability by A -site doping. Correlation between magnetoelectric properties and magnetization is discussed.

36 MATERIALS SCIENCE↗

Nematicity in the superconducting mixed state of strain detwinned underdoped Ba( Fe 1 - x Co x ) 2 As 2

Evidence of nematic effects in the mixed superconducting phase of slightly underdoped Ba ( Fe 1 - x Co x ) 2 As 2 is reported. We have found strong in-plane resistivity anisotropy for crystals in different strain conditions. For these compositions, there is no magnetic long-range order, so the description may be ascribed to the interplay between the superconducting and nematic order parameters. A piezoelectric-based apparatus is used to apply tensile or compressive strain to tune nematic domain orientation in order to examine intrinsic nematicity. Measurements are done under a rotating magnetic field, and the analysis of the angular dependence of physical quantities identifies the cases in which the sample is detwinned . Furthermore, the angular dependence of the data allows us to evaluate the effects of nematicity on the in-plane superconductor stiffness. Our results show that although nematicity contributes in a decisive way to the conduction properties, its contributions to the anisotropy properties of the stiffness of the superconducting order parameter is not as significant in these samples.

36 MATERIALS SCIENCE↗

Constraints on the induced gravitational wave background from primordial black holes

We perform a consistent calculation of primordial black hole (PBH) mass spectrum and second-order induced gravitational wave (GW) background produced from primordial scalar perturbations in radiation era of the early Universe. It is shown that the maximal amplitudes of the second-order GW spectrum that can be approached without conflicting with the PBH data do not depend significantly on the shape of primordial perturbation spectrum. The constraints on the GW background obtained in previous works are extended to a wider GW frequency range. We discuss the applicability of the currently available pulsar timing limits for obtaining the constraints on scalar power spectrum and PBH abundance and show that they can be used for strongly constraining the PBH number density in the PBH mass range {approx}(0.03-10)M{sub {center_dot}}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantitative texture analysis using the NOMAD time-of-flight neutron diffractometer

Strategies for efficient and reliable texture measurements have been explored using the Nanoscale Ordered Materials Diffractometer (NOMAD) at the Spallation Neutron Source located at Oak Ridge National Laboratory (ORNL). To test these strategies, the texture of an Al alloy was also investigated using another neutron diffraction instrument, a constant-wavelength neutron diffractometer (NRSF2) located at the High Flux Isotope Reactor, also at ORNL. Reasonable agreement was found across the two experimental methods, but differences in overall texture strength and the symmetry of some components were noted, depending on the data reduction and analysis method selected. Finally, on the basis of these results, potential improvements are identified which would enhance the texture measurement capability on NOMAD.

47 OTHER INSTRUMENTATION↗

Likelihood-based signal and noise analysis for docking of models into cryo-EM maps

Fast, reliable docking of models into cryo-EM maps requires understanding of the errors in the maps and the models. Likelihood-based approaches to errors have proven to be powerful and adaptable in experimental structural biology, finding applications in both crystallography and cryo-EM. Indeed, previous crystallographic work on the errors in structural models is directly applicable to likelihood targets in cryo-EM. Likelihood targets in Fourier space are derived here to characterize, based on the comparison of half-maps, the direction- and resolution-dependent variation in the strength of both signal and noise in the data. Because the signal depends on local features, the signal and noise are analysed in local regions of the cryo-EM reconstruction. The likelihood analysis extends to prediction of the signal that will be achieved in any docking calculation for a model of specified quality and completeness. A related calculation generalizes a previous measure of the information gained by making the cryo-EM reconstruction.

59 BASIC BIOLOGICAL SCIENCES↗

Adaptive Online Model Update Algorithm for Predictive Control in Networked Systems

In this article, we introduce an adaptive on-line model update algorithm designed for predictive control applications in networked systems, particularly focusing on power distribution systems. Unlike traditional methods that depend on historical data for offline model identification, our approach utilizes real-time data for continuous model updates. This method integrates seamlessly with existing online control and optimization algorithms and provides timely updates in response to real-time changes. This methodology offers significant advantages, including a reduction in the communication network bandwidth requirements by minimizing the data exchanged at each iteration and enabling the model to adapt after disturbances. Furthermore, our algorithm is tailored for non-linear convex models, enhancing its applicability to practical scenarios. The efficacy of the proposed method is validated through a numerical study, demonstrating improved control performance using a synthetic IEEE test case.

data-driven model predictive control↗

Distance dependent quenching and gamma-ray spectroscopy in tin-loaded polystyrene scintillators

In this study, we report the synthesis and inclusion of rationally designed organotin compounds in polystyrene matrices as a route towards plastic scintillators capable of gamma-ray spectroscopy. Tin loading ratios of up to 15% w/w have been incorporated, resulting in photopeak energy resolution values as low as 10.9% for 662 keV gamma-rays. Scintillator constituents were selected based upon a previously reported distance-dependent quenching mechanism. Data obtained using UV-Vis and photoluminescence measurements are consistent with this phenomenon and are correlated with the steric and electronic properties of the respective organotin complexes. We also report fast scintillation decay behavior that is comparable to the quenched scintillators 0.5% trans-stilbene doped bibenzyl and the commercial plastic scintillator BC-422Q-1%. These observations are discussed in the context of practical considerations such as optical transparency, ease-of-preparation/scale-up, and total scintillator cost.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Finding Waldo: Learning about Users from their Interactions

Visual analytics is inherently a collaboration between human and computer. However, in current visual analytics systems, the computer has limited means of knowing about its users and their analysis processes. While existing research has shown that a user’s interactions with a system reflect a large amount of the user’s reasoning process, there has been limited advancement in developing automated, real-time techniques that mine interactions to learn about the user. In this paper, we demonstrate that we can accurately predict a user’s task performance and infer some user personality traits by using machine learning techniques to analyze interaction data. Specifically, we conduct an experiment in which participants perform a visual search task and we apply well-known machine learning algorithms to three encodings of the users interaction data. We achieve, depending on algorithm and encoding, between 62% and 96% accuracy at predicting whether each user will be fast or slow at completing the task. Beyond predicting performance, we demonstrate that using the same techniques, we can infer aspects of the user’s personality factors, including locus of control, extraversion, and neuroticism. Further analyses show that strong results can be attained with limited observation time, in some cases, 82% of the final accuracy is gained after a quarter of the average task completion time. Overall, our findings show that interactions can provide information to the computer about its human collaborator, and establish a foundation for realizing mixed- initiative visual analytics systems.

97 MATHEMATICS AND COMPUTING↗

MO-AB-BRA-03: Calorimetry-Based Absorbed Dose to Water Measurements Using Interferometry

Purpose: Interferometry-based calorimetry is a novel technique to measure radiation-induced temperature changes allowing the measurement of absorbed dose to water (ADW). There are no mechanical components in the field. This technique also has the possibility of obtaining 2D dose distributions. The goal of this investigation is to calorimetrically-measure doses between 2.5 and 5 Gy over a single projection in a photon beam using interferometry and compare the results with doses calculated using the TG-51 linac calibration. Methods: ADW was determined by measuring radiation-induced phase shifts (PSs) of light passing through water irradiated with a 6 MV photon beam. A 9×9×9 cm{sup 3} glass phantom filled with water and placed in an arm of a Michelson interferometer was irradiated with 300, 400, 500 and 600 monitor units. The whole system was thermally insulated to achieve sufficient passive temperature control. The depth of measurement was 4.5 cm with a field size of 7×7 cm{sup 2}. The intensity of the fringe pattern was monitored with a photodiode and used to calculate the time-dependent PS curve. Data was acquired 60 s before and after the irradiation. The radiation-induced PS was calculated by taking the difference in the pre- and post-irradiation drifts extrapolated to the midpoint of the irradiation. Results were compared to computed doses. Results: Average comparison of calculated ADW values with interferometry-measured values showed an agreement to within 9.5%. k=1 uncertainties were 4.3% for calculations and 14.7% for measurements. The dominant source of uncertainty for the measurements was a temperature drift of about 30 µK/s caused by heat conduction from the interferometer’s surroundings. Conclusion: This work presented the first absolute ADW measurements using interferometry in the dose range of linac-based radiotherapy. Future work to improve measurements’ reproducibility includes the implementation of active thermal control techniques.

60 APPLIED LIFE SCIENCES↗

Correlation effects in the production of {sup 3}He nuclei in {sup 16}Op collisions at a momentum of 3.25 GeV/c per nucleon

New experimental data on the dependence of the mean multiplicities and kinematical features of {sup 3}He nuclei produced in {sup 16}Op collisions at a momentum of 3.25 GeV/c per nucleon on the degree of excitation of the fragmenting nucleus are presented. Strong correlations between the multiplicities of negatively charged pions and {sup 3}He nuclei are found.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Anisotropy measurement of pyrolytic carbon layers of coated particles

Equipment at the National Research Center Kurchatov Institute intended for the anisotropy determination of pyrolytic carbon layers in coated particles (CPs) of the GT-MGR reactor is tested and calibrated. The dependence of the anisotropy coefficient on the size of the measurement region is investigated. The results of measuring the optical anisotropy factor (OPTAF) for an aluminum mirror, rutile crystal, and available CP samples with the known characteristics measured previously using ORNL equipment (United States) are presented. In addition, measurements of CP samples prepared at VNIINM are performed. A strong dependence of the data on the preparation quality of metallographic sections is found. Our investigations allow us to make the conclusion on the working capacity of the existing equipment for measuring the anisotropy of pyrolytic carbon CP coatings using the equipment at the Kurchatov Institute with the relative error of about 1%. It is shown that the elimination of the errors caused by the stochastic fluctuations in a measuring path by mathematical processing of the signal allows us to decrease the relative error of OPTAF measurements to ∼0.3%.

36 MATERIALS SCIENCE↗