Search NASA⌕ Search

SEARCH · Search NASA

Results for “data sheet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Solar wind speed azimuthal variation along the heliospheric current sheet

Analysis of the speeds measured by Voyager 1 and 2 while skimming along a horizontal (east-west) portion of the current sheet over several days in 1977 is reported. The results demonstrate that in this case speed variations exist and would be large enough to significantly deform the sheet within a few AU or less if the current sheet were anything but perfectly horizontal. The spatial scale of the speed variation ranges from the smallest measureable scale using one hour averaged data up to tens of degrees in longitude. A deformation example is given under the assumption that the observed velocity variation exists on a current sheet that is initially perpendicular to the heliographic equator.

Suess, S. T.↗

Space Technology 5 Multi-Point Observations of Temporal Variability of Field-Aligned Currents

Space Technology 5 (ST5) is a three micro-satellite constellation deployed into a 300 x 4500 km, dawn-dusk, sun-synchronous polar orbit from March 22 to June 21, 2006, for technology validations. In this paper, we present a study of the temporal variability of field-aligned currents using multi-point magnetic field measurements from ST5. The data demonstrate that meso-scale current structures are commonly embedded within large-scale field-aligned current sheets. The meso-scale current structures are very dynamic with highly variable current density and/or polarity in time scales of approximately 10 min. They exhibit large temporal variations during both quiet and disturbed times in such time scales. On the other hand, the data also shown that the time scales for the currents to be relatively stable are approximately 1 min for meso-scale currents and approximately 10 min for large scale current sheets. These temporal features are obviously associated with dynamic variations of their particle carriers (mainly electrons) as they respond to the variations of the parallel electric field in auroral acceleration region. The characteristic time scales for the temporal variability of meso-scale field-aligned currents are found to be consistent with those of auroral parallel electric field.

Le, Guan↗

Are existing magnetospheric models excessively stretched?

The distribution of the average north-south magnetic field component Bz in the vicinity of the neutral sheet has been investigated. This component is crucial for mappings between the nightside polar ionosphere and the equatorial magnetosphere. Data sets consisting of about 0.5 R(E) averages of magnetic field observations by the IMP/HEOS and ISEE spacecraft have been compared to the field predicted by the Tsyganenko (1987, 1989) models T87 and T89. It was found that both T87 and T89 underestimate Bz in the near tail region by as much as a factor of 2. Modified versions of the T87 model, incorporating plasma sheet warping, were obtained by fitting the model parameters via nonlinear least squares to the ISEE data set and yielded Bz values in agreement with the ISEE data. The study reveals an enormous scatter among the observed baseline values of Bz (on a time scale of 10-20 min), as well as intrinsic biases imposed by the mathematical structure of tail models, and these two factors (especially the first one) greatly limit the accuracy of model predictions of tail Bz.

Peredo, Mauricio↗

Hailstone impact simulator.

The hailstone impact simulator was constructed to provide experimental data in support of a program to develop the analytical methods for predicting hail damage to aircraft structures. This paper describes the simulator, its operation, the type of data obtained, and the resulting damage by individual hailstones to metallic flat sheets and spherical caps. Simulated hailstones of 1.3, 2.5, 3.8, and 5.1 cm in diameter were used at impact velocities of 60 to 600 m/s.

Alfaro-Bou, E.↗

A program of data synthesis from the ALSEP/CPLEE ALSEP/SIDE, and Explorer 35 magnetometer to investigate lunar terminator and nightside particle fluxes and surface interactions

Lunar nightside electron fluxes were studied with the aid of the ALSEP/CPLEE and other instruments. The flux events were shown to be due to (a) electrons propagating upstream from the earth's bow shock, (b) electrons thermalized and scattered to the lunar surface by disturbances along the boundary of the lunar solarwind cavity, and (c) solar wind electrons scattered to the lunar surface by lunar limb shocks and/or compressional disturbances. These electrons were identified as a cause of the high night surface negative potentials observed in tha ALSEP/SIDE ion data. A study was also made of the shadowing of magnetotail plasma sheet electrons by interactions between the lunar body and the ambient magnetic field and by interactions between charged particles and lunar remnant magnetic fields. These shadowing effects were shown to modify lunar surface and near-lunar potential distributions.

Reasoner, D. L.↗

A two dimensional analysis of sheet resistance and contact resistance effects in solar cells

A computer model is developed to study the two-dimensional nature of the sheet resistance and contact resistance effects in solar cells. A major result is the demonstration that the distributed nature of the semiconductor sheet resistance causes the terminal dark I-V characteristics to exhibit an exp(qV/2kT) type dependence even when the one-dimensional characteristics of the cell exhibit an exp(qV/kT) type voltage dependence. The analytical model which is developed provides an easy method for estimating the sheet resistance of a solar cell from the terminal I-V data.

Fang, C. R.↗

Application of digital image analysis techniques to antimisting fuel spray characterization

Pulsed ruby laser sheet illumination of the spray is used for the initial recording of data on very-high-resolution photographic film. The digitization of mosaic elements is effected with a vidicon and video digitizer whose output is stored in computer RAM memory for processing. Highly nonspherical elements and a broad range of drop diameters (8-2000 microns) resulting from the unusual rheological properties of the fuel-additive system are accommodated by the device configuration and algorithms. It is found that the generation of two-dimensional images by means of scattered light also eliminates errors resulting from variations in the index of refraction and from the submicron scattering sites that are often present within the modified fuel. No a priori information on the drop size distribution or on the system response to various drop sizes is required.

Fleeter, R.↗

Automated RTOP Management System

The structure of NASA's Office of Aeronautics and Space Technology electronic information system network from 1983 to 1985 is illustrated. The RTOP automated system takes advantage of existing hardware, software, and expertise, and provides: (1) computerized cover sheet and resources forms; (2) electronic signature and transmission; (3) a data-based information system; (4) graphics; (5) intercenter communications; (6) management information; and (7) text editing. The system is coordinated with Headquarters efforts in codes R,E, and T.

Hayes, P.↗

Numerical simulations of double layers and auroral electric fields

Recent one-dimensional and two-dimensional numerical simulations of double layers (DLs) in the electric fields of the auroral plasma are reviewed, with reference to observational data. It is found that two-dimensional DLs driven by current sheets of finite thickness have different characteristics, depending on whether the layer thickness is less than or much greater than the ion gyroradius: When thickness is less than ion gyroradius, V-shaped DLs form with nearly equal parallel and perpendicular potential drops; when layer thickness is much greater than ion gyroradius the major parallel potential drop occurs outside the current sheet and the perpendicular electric fields are localized at the edges of the current sheet. It is shown that some features of the simulated fields, such as the amplitudes and scale lengths, are qualitatively similar to those observed in space.

Singh, N.↗

Correlated observations of substorm effects in the near-earth region and the deep magnetotail

Simultaneous observations of energetic particle measurements from the geosynchronous satellite 1982-019 and magnetic field, electron plasma, and energetic proton and electron measurements obtained with ISEE 3 in the deep tail are presented. The data are supplemented by ground magnetograms. A substorm occurred on March 22, 1983, close to 0300 UT as identified in the ground magnetograms and by a particle injection at geosynchronous orbit. About 10 min later, ISEE 3 observed (at a distance of approximately 130 RE in the deep tail) magnetic field, plasma, and energetic particle signatures consistent with the passage of a plasmoid. After the passage of the plasmoid the satellite enters shortly into a lobelike environment, in which an energetic proton beam is observed. High-resolution magnetic field data are indicative of small-scale structures in the postplasmoid plasma sheet. From the plasma sheet flow speed during the plasmoid's passage it is concluded that the 0300 UT substorm is responsible for its origin. This allows an approximate timing of the plasmoid release at a near-earth neutral line and of the plasma sheet recovery after substorm onset, and it indicates a close relationship between processes in the near-earth plasma sheet and the deep tail during substorms.

Scholer, M.↗

On the 3-dimensional structure of plasmoids

The hypothesis that the IMF penetrates plasmoids causing them to be three- rather than two-dimensional is tested by comparing observations of By within plasmoids and related tail structures to upstream IMF By data. The magnetic topologies that result from the mergings of closed plasma sheet flux tubes and open tail lobe flux tubes at a near-earth neutral line, and merging near the tail flanks are described and studied. The particle signals and isotropic electron distributions are examined. It is observed that the IMF By penetrates plasmoids and that their structure is three-dimensional. In the three-dimensional model of plasmoids the reconnected plasma sheet field lines form a magnetic flux-ropelike structure. The three-dimensional model is utilized to analyze stagnant, slowly moving and earthward moving structures.

Hughes, W. J.↗

Laser velocimeter measurements of the flowfield generated by an advanced counterrotating propeller

Results are presented of an investigation to measure the flowfield generated by an advanced counterrotating pusher propeller model similar to the full-scale Unducted Fan demonstrator engine. A laser Doppler velocimeter was used to measure the velocity field in several planes normal to the centerline of the model at axial stations upstream and downstream of each rotor. During this investigation, blades of the F4/A4 type were installed on the model which was operating in a freestream Mach 0.72 regime, with the advance ratio of each rotor set at 2.80. The measured data indicate only a slight influence of the potential field of each front rotor blade on the flowfield upstream of the rotor. The data measured downstream of the front rotor characterize the tip vortices, vortex sheets and potential field nonuniformities generated by the front rotor. The unsteadiness of the flow in the rotating frame of reference of the aft rotor is also illustrated.

Podboy, Gary G.↗

Laser velocimeter measurements of the flowfield generated by an advanced counterrotating propeller

Results are presented of an 0.72 regime, with the advance ratio of each rotor set at 2.80. The measured data indicate only a slight influence of the potential field of each front rotor blade on the flowfield upstream of the rotor. The data measured downstream of the front rotor characterize the tip vortices, vortex sheets and potential field nonuniformities generated by the front rotor. The unsteadiness of the flow in the rotating frame of reference of the aft rotor is also illustrated.

Podboy, Gary G.↗

The Center for Astrophysics Redshift Survey - Recent results

Six strips of the CfA redshift survey extension are now complete. The data continue to support a picture in which galaxies are on thin sheets which nearly surround vast low-density voids. The largest structures are comparable with the extent of the survey. Voids like the one in Bootes are a common feature of the large-scale distribution of galaxies. The issue of fair samples of the galaxy distribution is discussed, examining statistical measures of the galaxy distribution including the two-point correlation functions.

Geller, Margaret J.↗

NASA Lewis 8- by 6-foot supersonic wind tunnel user manual

The 8- by 6-Foot Supersonic Wind Tunnel (SWT) at Lewis Research Center is available for use by qualified researchers. This manual contains tunnel performance maps which show the range of total temperature, total pressure, static pressure, dynamic pressure, altitude, Reynolds number, and mass flow as a function of test section Mach number. These maps are applicable for both the aerodynamic and propulsion cycle. The 8- by 6-Foot Supersonic Wind Tunnel is an atmospheric facility with a test section Mach number range from 0.36 to 2.0. General support systems (air systems, hydraulic system, hydrogen system, infrared system, laser system, laser sheet system, and schlieren system are also described as are instrumentation and data processing and acquisition systems. Pretest meeting formats are outlined. Tunnel user responsibility and personal safety requirements are also stated.

Soeder, Ronald H.↗

The diatom record from beneath the West Antarctic Ice Sheet and the global proxy perspective

Recent glaciological evaluation and modeling of the marine-based West Antarctic Ice Sheet (WAIS) support the possibility that the WAIS disintegrated during one or more Pleistocene interglacial period(s). The magnitude of sea level and oxygen isotope variation during certain late-Pleistocene interglacial periods is also consistent with the possibility of major retreat of the WAIS. Although oxygen isotopes from deep-sea sediments provide the best available proxy record for global ice volume (despite the ambiguities in the record), the source of ice volume changes must be hypothesized. Based on the intensity of interglacial isotopic shifts recorded in Southern Ocean marine sedimentary records, stage 11 (400,000 years ago) is the strongest candidate for WAIS collapse, but the records for stages 9, 7, and 5.5 are all consistent with the possibility of multiple late-Pleistocene collapses. Seismic reflection studies through the WAIS have revealed thick successions of strata with seismic characteristics comparable to upper Tertiary marine sediments. Small samples of glacial diamictons from beneath the ice sheet have been collected via hot-water drilled access holes. These sediments include mixed diatom assemblages of varying ages. Late-Miocene diatoms dominate many samples, probably reflecting marine deposition in West Antarctic basins prior to development of a dominantly glacial phase in West Antarctica. In addition to late-Miocene diatoms, samples from Upstream B (1988/89) contain rare post-Miocene diatoms, many of which imply deposition in the West Antarctic interior during one or more Pleistocene deglaciation periods. Age-diagnostic fossils in glacial sediments beneath ice sheets provide relatively coarse chronostratigraphic control, but they do contain direct evidence of regional deglaciation. Thus, sub-glacial till samples provide the evidence regarding the source of ice sheet variability seen in well-dated proxy records. Combined, these independent data sets can provide a more comprehensive and less speculative interpretation of the history of past glacial minima in currently glaciated polar regions.

Scherer, Reed P.↗

Description of stress-strain curves by three parameters

A simple formula is suggested for describing the stress-strain curve in terms of three parameters; namely, Young's modulus and two secant yield strengths. Dimensionless charts are derived from this formula for determining the stress-strain curve, the tangent modulus, and the reduced modulus of a material for which these three parameters are given. Comparison with the tensile and compressive data on aluminum-alloy, stainless-steel, and carbon-steel sheet in NACA Technical Note No. 840 indicates that the formula is adequate for most of these materials. The formula does not describe the behavior of alclad sheet, which shows a marked change in slope at low stress. It seems probable that more than three parameters will be necessary to represent such stress-strain curves adequately.

Ramberg, Walter↗