Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Plasma breakdown in bubbles passing between two pin electrodes

The ignition of plasmas in liquids has applications from medical instrumentation to manipulation of liquid chemistry. Formation of plasmas directly in a liquid often requires prohibitively large voltages to initiate breakdown. Producing plasma streamers in bubbles submerged in a liquid with higher permittivity can significantly lower the voltage needed to initiate a discharge by reducing the electric field required to produce breakdown. The proximity of the bubble to the electrodes and the shape of the bubbles play critical roles in the manner in which the plasma is produced in, and propagates through, the bubble. In this paper, we discuss results from a three-dimensional direct numerical simulation (DNS) used to investigate the shapes of bubbles formed by injection of air into water. Comparisons are made to results from a companion experiment. A two-dimensional plasma hydrodynamics model was then used to capture the plasma streamer propagation in the bubble using a static bubble geometry generated by the DNS The simulations showed two different modes for streamer formation depending on the bubble shape. In an elliptical bubble, a short electron avalanche triggered a surface ionization wave (SIWs) resulting in plasma propagating along the surface of the bubble. In a circular bubble, an electron avalanche first traveled through the middle of the bubble before two SIWs began to propagate from the point closest to the grounded electrode where a volumetric streamer intersected the surface. In an elliptical bubble approaching a powered electrode in a pin-to-pin configuration, we experimentally observed streamer behavior that qualitatively corresponds with computational results. Optical emission captured over the lifetime of the streamer curve along the path of deformed bubbles, suggesting propagation of the streamer along the liquid/gas boundary interface. Plasma generation supported by the local field enhancement of the deformed bubble surface boundaries is a mechanism that is likely responsible for initiating streamer formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1974

Effect of gamma-ray irradiation on the surface states of MOS tunnel junctions

Gamma-ray irradiation with doses up to 8 megarad produces no significant change on either the C(V) or the G(V) characteristics of MOS tunnel junctions with intermediate oxide thicknesses (40-60 A), whereas the expected flat-band shift toward negative electrode voltages occurs in control thick oxide capacitors. A simple tunneling model would explain the results if the radiation-generated hole traps are assumed to lie below the valence band of the silicon. The experiments also suggest that the observed radiation-generated interface states in conventional MOS devices are not due to the radiation damage of the silicon surface.

Ma, T. P.↗
DOE OSTI2018

Comparison of purity in single walled carbon nanotube gas detectors with Pd and Ti electrodes using low frequency noise techniques

This work deals with oxide traps properties of single walled carbon nanotubes (SWCNTs) based gas sensors using Random telegraph signals (RTS) and low frequency (LF) noise techniques. RTS signals are two or more levels switching events that we observe measuring the drain current of transistors with Ti (RTS{sub 1}) and Pd (RTS{sub 2}) contacts. RTS noise is analyzed in time and frequency domains. Time domain analysis allows us to identifying slow traps (three traps) responsible to RTS noises (energetic position and cross capture section). These traps undetectable by other techniques, e.g. deep level transient spectroscopy (DLTS) technique, are localized in the gate oxide region. The spatial localization of the three traps in the SWCNT/SiO{sub 2} interface are determined using numerical simulations (y{sub Trap1} ≈0.6 nm, y{sub Trap2} ≈0.9 nm and y{sub Trap3} ≈0.3 nm). (RTS{sub 1}) noise is attributed to trap1 and (RTS{sub 2}) to traps 2 and 3. From RTS analysis in frequency domain, are able to extract the cut-off frequencies of a single trap even at very low frequencies (for RTS{sub 1} noise f{sub c} = 10 Hz (trap1) and for RTS{sub 2} noise f{sub c1} = 4 Hz (trap2), f{sub c2} = 50 Hz (trap 3)). These results are in good agreement with those obtained by analysis in time domain and confirm the localization of each trap from the SWCNT/SiO{sub 2} interface. This is the first time that this kind of studies is performed on CNTFETs used as gas sensors and gives us some interesting hints on the potential phenomena related to these new generation of carbon based nanomaterials based devices in the field of electronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Microstructure Scale Lithium-Ion Battery Modeling: Part III. When and Where Lithium Plating Occurs and its Correlation with the Electrode Microstructure

Li-ion battery performance and degradation are closely related to the cell’s underlying electrode microstructure. Electrode microstructures are typically characterized with volume-averaged properties that neglect the impact of local heterogeneities. However, local heterogeneities create hot spots that can trigger degradation onset. Herein, a microstructure scale electrochemical model is used to investigate the impact of microstructure heterogeneity on lithium plating. The model predicts lithium plating is not uniform, even when considering a relatively small portion of the electrode (a cross-sectional area of 154×144 µm 2 ), preferring to plate on larger particles as compared to smaller particles. While local heterogeneities control where plating occurs, the model predicts that volume-averaged properties control when plating occurs. Additionally, the model predicts that the active material specific surface area has a linear relationship with the plating onset. However, the linear relationship between increased active material surface area and delayed plating response appears to be sensitive to the microstructure feature used to increase the active interface area. Here, a comparative case-study is explored where the specific surface area is increased by either reducing the active material particle diameter, adding open-porosity cracks, or increasing the active material surface roughness. The model predicts that increasing the specific surface area by reducing the active material particle diameter is the most effective strategy for delaying lithium plating. At 6C, reducing particle size is shown to be 3 and 20 times more effective than, respectively, adding open-porosity cracks and increasing surface roughness. A dual-layer electrode architecture combining gradations both for average properties and uniformities is eventually proposed to improve homogeneous material utilization and reduce degradation at high charge rates.

25 ENERGY STORAGE↗
DOE OSTI2019

Triboionization: a Novel Ionization Method by Peeling of Cohesive Substances for Mass Spectrometry

A novel ionization/sampling method termed triboionization was developed. Triboionization is an ionization method that only uses cohesive substances, such as food wrap or sticky tape, and does not require an electrode, electric power supply, heat source, light source, radiation, or gas, unlike most other conventional ambient ionization methods. In this study, the sample compound attached to adhesive tape or plastic wrap was quickly peeled off at a distance of approximately 2 cm from the atmospheric interface of a mass spectrometer. All of the five types of food wrap and 13 types of adhesive tape tested successfully ionized caffeine. Nine out of ten model compounds were detected as the corresponding molecular ions in the positive or negative mode by this ionizing contrivance using an oriented polypropylene adhesive tape. The detected molecular ions were typically protonated molecules or sodium adducts in the positive mode or deprotonated molecules in the negative mode. The elemental compositions of the observed ions were confirmed within 5 ppm by high-resolution mass spectrometry. The triboionization phenomenon was considered to depend on physical and electronic events caused by peeling off a cohesive substance. Triboionization is able to provide a compact ion source using only mechanical mechanisms. Additionally, triboionization allows sticky tape to be used as a convenient sampling device for surface analysis. .

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2019

Interfacial Reactions and Performance of Li 7 La 3 Zr 2 O 12 -Stabilized Li–Sulfur Hybrid Cell

Herein, we report on the characterization of a Li–S hybrid cell containing a garnet solid electrolyte (Li 7 La 3 Zr 2 O 12 , LLZO) and conventional liquid electrolyte. While the liquid electrolyte provided ionically conductive pathways throughout the porous cathode, the LLZO acted as a physical barrier to protect the Li metal anode and prevent polysulfide shuttling during battery operation. This hybrid cell exhibited an initial capacity of 1000 mAh/g(S) and high Coulombic efficiency (>99%). The interface between the liquid electrolyte and LLZO was studied using electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy (XPS). These results indicate that a spontaneous interfacial reaction layer formed between the LLZO and liquid electrolyte. XPS depth profiling experiments indicate that this layer consisted of Li-enriched phases near the surface (e.g., Li 2 CO 3 ) and intermediate Li–La–Zr oxides in subsurface regions. The reaction layer extended well beyond the LLZO surface, and bulk pristine LLZO was not observed even at the deepest sputtering depths used in this study (~90 nm). Overall, these results highlight that developing stable electrode/electrolyte interfaces is critical for solid-state batteries and their hybrids.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Autonomous Flow Electrochemistry for Accelerated Catalyst Discovery

Our objective is to develop an Autonomous Chemical Experimentation (ACE) platform that accelerates discovery of new catalytic transformations and other energy-relevant chemical reactions and processes. We intentionally designed ACE to be highly modular, both with respect to its rapid deployment to different chemistries and experimental workflows as well as incorporation of a wide range of different AI algorithms. In addition to the development of the core software architecture, initial efforts were made to incorporate Large Language Models to provide human-interpretable reasoning of the optimizer’s actions, and to develop a user-friendly graphical interface for experimental researchers. ACE was demonstrated using a flow electrocatalysis platform containing an inline FTIR spectrometer for real-time analysis and quantification of the reaction outcome. Human-in-the-loop experiments were performed in which a human researcher conducted an experiment using electrode potentials suggested by ACE, then fed the spectral data back to ACE for decision making. After confirming the successful function of the optimizer, efforts were next directed to automation of the hardware and performed full autonomy tests using three reactions: catalytic oxidation of formate, catalytic oxidation of cyclohexanol, and oxidation of hydroquinone. These studies confirm that ACE can close the loop between reaction execution, analysis, and optimization. They also reveal that more improved product detection methods will be essential for ACE to make well-informed decisions for reactions with low conversions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Fuel cell seal

An example fuel cell seal assembly includes a seal configured to restrict flow of a fuel cell fluid through at least one of an outer lateral edge of a first gas diffusion layer, an outer lateral edge of a membrane electrode assembly, and an outer lateral edge of a second gas diffusion layer. The outer lateral edge of the first gas diffusion layer is laterally spaced from the outer lateral edge of the second gas diffusion layer. An example method of sealing a fuel cell interface includes limiting flow of a fuel cell fluid using a seal configured to restrict flow through an outwardly facing edge of at least one of a first gas diffusion layer and an outwardly facing edge of a second gas diffusion layer. The outwardly facing edge of the first gas diffusion layer is spaced from the outwardly facing edge of the second gas diffusion layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Beyond Volume Variation: Anisotropic and Protrusive Lithiation in Bismuth Nanowire

Materials storing energy via an alloying reaction are promising anode candidates in rechargeable lithium-ion batteries (LIBs) due to their much higher energy density than the current graphite anode. Until now, the volumetric expansion of such electrode particles during lithiation has been considered as solely responsible for cycling-induced structural failure. Here, we report different structural failure mechanisms using single-crystalline bismuth nanowires as the alloying-based anode. The Li–Bi alloying process exhibits a two-step transition, that is, Bi–Li 1 Bi and Li 1 Bi–Li 3 Bi. Interestingly, the Bi–Li 1 Bi phase transition occurs not only in the bulk Bi nanowire but also on the particle surface showing its characteristic behavior. The bulk alloying kinetics favors a Bi-(012)-facilitated anisotropic lithiation, whose mechanism and energetics are further studied using the density functional theory calculations. More importantly, the protrusion of Li 1 Bi nanograins as a result of anisotropic Li–Bi alloying is found to dominate the surface morphology of Bi particles. The growth kinetics of Li 1 Bi protrusions is understood atomically with the identification of two different controlling mechanisms, that is, the dislocation-assisted strain relaxation at the Bi/Li 1 Bi interface and the short-range migration of Bi supporting the off-Bi growth of Li 1 Bi. As loosely rooted to the bulk substrate and easily peeled off and detached into the electrolyte, these nanoscale protrusions developed during battery cycling are believed to be an important factor responsible for the capacity decay of such alloying-based anodes at the electrode level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Intrinsic Chemical Reactivity of Silicon Electrode Materials: Gas Evolution

In this work, we explore how the chemical reactivity toward an aprotic battery electrolyte changes as a function of lithium salt and silicon surface termination chemistry. The reactions are highly correlated, where one decomposition reaction leads to a subsequent decomposition reaction. We report the data show that the presence of silicon hydrides (SiH$_x$) promotes the formation of CO gas, while surface oxides SiO$_x$ drive the formation of CO 2 . The extent and rate of oxidation depend on the surface basicity of the SiO 2 surface species. The most acidic surfaces seem to hinder CO 2 generation but not the decomposition of the salt. Indeed, the presence of F-containing salts (LiPF 6 and LiTFSI) promotes the reactions between carbonate electrolyte and silicon surfaces. Surfaces with high Li content seem to be the most passivating to gassing reactions, pointing to a pathway to stabilize the interfaces during cell formation and assembly.

25 ENERGY STORAGE↗
DOE OSTI2025

Improving the fast-charging capability of NbWO-based Li-ion batteries

The discovery of Nb-W-O materials years ago marks the milestone of charging a lithium-ion battery in minutes. Nevertheless, for many applications, charging lithium-ion battery within one minute is urgently demanded, the bottleneck of which largely lies in the lack of fundamental understanding of Li + storage mechanisms in these materials. Herein, by visualizing Li + intercalated into representative Nb 16 W 5 O 55 , we find that the fast-charging nature of such material originates from an interesting rate-dependent lattice relaxation process associated with the Jahn-Teller effect. Furthermore, in situ electron microscopy further reveals a directional, [010]-preferred Li + transport mechanism in Nb 16 W 5 O 55 crystals being the “bottleneck” toward fast charging that deprives the entry of any desolvated Li + through the prevailing non-(010) surfaces. Hence, we propose a machine learning-assisted interface engineering strategy to swiftly collect desolvated Li + and relocate them to (010) surfaces for their fast intercalation. As a result, a capacity of ≈ 116 mAh g −1 (68.5% of the theoretical capacity) at 80 C (45 s) is achieved when coupled with a Li negative electrode.

batteries↗
DOE OSTI2021

Linking void and interphase evolution to electrochemistry in solid-state batteries using operando X-ray tomography

Despite progress in solid-state battery engineering, our understanding of the chemo-mechanical phenomena that govern electrochemical behavior and stability at solid-solid interfaces remains limited compared to solid-liquid interfaces. Here, we use operando synchrotron X-ray computed microtomography to investigate the evolution of lithium/solid-state electrolyte interfaces during battery cycling, revealing how the complex interplay among void formation, interphase growth, and volumetric changes determines cell behavior. Void formation during lithium stripping is directly visualized in symmetric cells, and the loss of contact that drives current constriction at the interface between lithium and the solid-state electrolyte (Li10SnP2S12) is quantified and found to be the primary cause of cell failure. The interphase is found to be redox-active upon charge, and global volume changes occur due to partial molar volume mismatches at either electrode. Finally, these results provide new insight into how chemo-mechanical phenomena can impact cell performance, which is necessary to understand for the development of solid-state batteries.

42 ENGINEERING↗
NASA NTRS1991

Long life electrodes for large-area x-ray generators

This invention is directed to rugged, reliable, and long-life electrodes for use in large-area, high-current-density electron gun and x-ray generators which are employed as contamination-free preionizers for high-energy pulsed gas lasers. The electron source at the cathode is a corona plasma formed at the interface between a conductor, or semiconductor, and a high-permittivity dielectric. Detailed descriptions are provided of a reliable cold plasma cathode, as well as an efficient liquid-cooled electron beam target (anode) and x-ray generator which concentrates the x-ray flux in the direction of an x-ray window.

Rothe, Dietmar E.↗
NASA NTRS2011

Development of Sample Verification System for Sample Return Missions

This paper describes the development of a proof of-concept sample verification system (SVS) for in-situ mass measurement of planetary rock and soil sample in future robotic sample return missions. Our proof-of-concept SVS device contains a 10 cm diameter pressure sensitive elastic membrane placed at the bottom of a sample canister. The membrane deforms under the weight of accumulating planetary sample. The membrane is positioned in proximity to an opposing substrate with a narrow gap. The deformation of the membrane makes the gap to be narrower, resulting in increased capacitance between the two nearly parallel plates. Capacitance readout circuitry on a nearby printed circuit board (PCB) transmits data via a low-voltage differential signaling (LVDS) interface. The fabricated SVS proof-of-concept device has successfully demonstrated approximately 1pF/gram capacitance change

Electrodes↗
DOE OSTI2021

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

Composite polymer electrolytes (CPEs) for solid-state Li-metal batteries (SSLBs) still suffer from gradually increased interface resistance and unconstrained Li-dendrite growth. Herein, we addressed the challenges by designing a LiF-rich inorganic solid-electrolyte interphase (SEI) through introducing a fluoride-salt-concentrated interlayer on CPE film. The rigid but flexible CPE helps accommodate the volume change of electrodes, while the polymeric highly concentrated electrolyte (PHCE) surface-layer regulates Li-ion flux due to the formation of a stable LiF-rich SEI via anion reduction. The designed CPE-PHCE presents enhanced ionic conductivity and high oxidation stability of >5.0 V (versus Li/Li + ). Furthermore, it dramatically reduces the interfacial resistance and achieves a high critical current density of 4.5 mA cm –2 . The SSLBs, fabricated with thin CPE-PHCE membranes (<100 μm) and Co-free LiNiO 2 cathodes, exhibit exceptional electrochemical performance and long cycling stability. Lastly, this approach of SEI design can also be applied to other types of batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Thermodynamic, Kinetic, and Transport Contributions to Hydrogen Evolution Activity and Electrolyte-Stability Windows for Water-in-Salt Electrolytes

Concentrated water-in-salt electrolytes (WiSEs) are used in aqueous batteries and to control electrochemical reactions for fuel production. The hydrogen evolution reaction is a parasitic reaction at the negative electrode that limits cell voltage in WiSE batteries and leads to self-discharge, and affects selectivity for electrosynthesis. Mitigating and modulating these processes is hampered by a limited fundamental understanding of HER kinetics in WiSEs. Here, in this study, we quantitatively assess how thermodynamics, kinetics, and interface layers control the apparent HER activities in 20 m LiTFSI. When the LiTFSI concentration is increased from 1 to 20 m, an increase in proton activity causes a positive shift in the HER equilibrium potential of 71 mV. The exchange current density, i o , derived from the HER branch for 20 m LiTFSI in 98% purity (0.56 ± 0.05 μA/cm Pt 2 ), however, is 8 times lower than for 20 m LiTFSI in 99.95% (4.7 ± 0.2 μA/cm Pt 2 ) and 32 times lower than for 1 m LiTFSI in 98% purity (18 ± 1 μA/cm Pt 2 ), demonstrating that the WiSE's impurities and concentration are both central in significantly suppressing HER kinetics. The ability and applicability of the reported methods are extended by examining additional WiSEs formulations made of acetates and nitrates.

25 ENERGY STORAGE↗
DOE OSTI2018

Photoelectrochemical properties of MOF-induced surface-modified TiO 2 photoelectrode

Heteroatom doping and surface modification with oxides are both important strategies to improve the photoelectrochemical (PEC) activities of TiO 2 photoelectrodes. However, it is difficult to combine the two strategies into a single synthesis process. Herein, a simple one-pot synthesis method was developed to modify a TiO 2 photoelectrode surface by N-doping while simultaneously modifying the surface with In 2 O 3 and NiO. This method involved growing MOF onto a TiO 2 surface with N-containing organic ligands and In and Ni salts as metal precursors, followed by heat treatment at 600 °C. The roles of heteroatom doping and oxide modification are proposed as follows. (i) N-Doping extends the absorption edge of the TiO 2 to a longer wavelength region and enhances visible light absorption. (ii) N-Doping together with the passivation of TiO 2 surface trap states by oxide modification increases the donor density in TiO 2 . (iii) The generated suitable interfaces on the surface of TiO 2 facilitate photogenerated charge separation and transfer. In comparison with the pristine TiO 2 photoelectrode, the metal oxide- and heteroatom-modified TiO 2 photoelectrode exhibits superior photoelectrochemical performance under both simulated sunlight and visible light illumination. Suitable substrate of the electrode, appropriate size of the as-synthesized MOF precursors, and choice of ligands and metal ions are important factors for this strategy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Cryogenic Focused Ion Beam Characterization of Lithium Metal Anodes

Lithium metal is viewed as the ultimate battery anode because of its high theoretical capacity and low electrode potential, but its implementation has been limited by low Coulombic efficiency and dendrite formation above a critical current density. Determining the fundamental properties dictating lithium metal plating–stripping behavior is challenging because characterization techniques are limited by the sensitivity of lithium metal to damage by external probes, which regularly results in altered morphology and chemistry. Motivated by recent application of cryogenic transmission electron microscopy (cryo-TEM) to characterize lithium metal at the atomic scale, we explore the cryogenic focused ion beam (cryo-FIB) method as a quantitative tool for characterizing the bulk morphology of electrochemically deposited lithium and as a technique that enables TEM observation of Li-metal/solid-state electrolyte interfaces. Lastly, this work highlights the importance of cryo-FIB methodology for preparing sensitive battery materials and elucidates the impact of electrolyte selection on the density and morphology of plated lithium.

25 ENERGY STORAGE↗