Search NASA⌕ Search

SEARCH · Search NASA

Results for “formatting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Atmospheric effects on ejecta emplacement and crater formation on Venus from Magellan

Surface signatures of energy partitioning are used as a framework for testing extrapolations from laboratory experiments and other planetary settings to assess the effects of both gravity and an atmosphere on impact crater formation on Venus. The dense lower atmosphere of Venus is found to assume the role of a low-density target for bodies smaller than about 4 km in diameter. Air blasts created by cratering in the atmosphere produce distinctive surface signatures that allow the derivation of an independent assessment of impactor energy at the limit of break up. Dynamic pressures during entry of larger bodies will exceed their strength limit but may not prevent penetration of the atmosphere due to aerodynamic reshaping that minimizes the drag coefficient. This process may account for the formation of unusually small craters (1-3 km). The dense atmosphere of Venus preserves signatures of early time cratering processes on the surface that are typically lost on atmosphere-free surfaces.

Schultz, Peter H.↗

Hydrocarbon nucleation and aerosol formation in Neptune's atmosphere

The present theoretical analysis of particle formation mechanisms at conditions relevant to the troposphere and stratosphere of Neptune indicates that the hydrocarbon-nucleation process in the lower stratosphere is very inefficient, because saturation ratios much greater than unity are required in the cases of aerosol formation by homogeneous, heterogeneous, and ion-induced nucleation. The latter two of these, however, should be possible on Neptune for most of the complex hydrocarbon species in question. The relative effectiveness of heterogeneous and ion-induced nucleation depends on the physical and thermodynamic properties of the species in question, condensable-species abundance, supersaturation temperatures, and the number and type of available condensation ions or nuclei.

Moses, Julianne I.↗

NGC 4550 - A laboratory for testing galaxy formation

The kinematic and photometric structure of the two components of the E7/S0 galaxy NGC 4550 are evaluated quantitatively to determine the system's morphology. Attention is given to whether the data indicate a rotating bulge with a counterrotating disk or a pair of counterstreaming disks, and formation scenarios are discussed in the light of the findings. The data examined include long-slit spectroscopy with evidence of bimodality in the line-of-sight velocity distribution. Two photometrically inseparable counterstreaming disk components are identified and their velocities given. The structure and the formation scenarios given point to the feasibility of absorption of external material by galaxy disks without extreme heating. The possibility of detecting stellar counterrotation in S0 disks is discussed based on the study of NGC 4550.

Rix, Hans-Walter↗

Comet Halley as an aggregate of interstellar dust and further evidence for the photochemical formation of organics in the interstellar medium

Photolysis of mixtures of CO:NH3:H2O at 12 K results in the formation of an organic residue which is not volatile in high vacuum at room temperature. Analysis of this fraction by GC-MS resulted in the detection of C2-C3 hydroxy acids and hydroxy amides, glycerol, urea, glycine, hexamethylene tetramine, formamidine and ethanolamine. Use of isotopically labeled gases made it possible to establish that the observed products were not contaminants. The reaction pathways for the formation of these products were determined from the position of the isotopic labels in the mass spectral fragments. The significance of these findings to the composition of comets and the origins of life is discussed.

Briggs, R.↗

Core formation by giant impacts

The present model for the timing and mechanisms of planetary core formation argues that once a planet reaches a certain minimum mass, the large impacts that are typical of late accretion can trigger core formation. This model circumvents the difficulties posed by the large-scale segregation of molten iron into diapirs, and the displacement of the cold, elastic interior of the planet by the iron. The analytical melting model used is based on the Hugoniot equations, the empirical relationship for the decline of particle velocity with distance, and the linear shock-particle velocity relationship.

Tonks, W. B.↗

Formation of model polar stratospheric cloud films

Fourier transform infrared spectroscopy was used to examine the competitive growth of films representative of polar stratospheric clouds. These experiments show that either crystalline nitric acid trihydrate (beta-NAT) or amorphous films with H2O:HNO3 ratios close to 3:1 formed at temperatures 3-7 K warmer than the ice frost point under stratospheric pressure conditions. In addition, with higher HNO3 pressure, we observed nitric acid dihydrate (NAD) formation at temperatures warmer than ice formation. However, our experiments also show that NAD surfaces converted to beta-NAT upon exposure to stratospheric water pressures. Finally, we determined that the net uptake coefficient for HNO3 on beta-NAT is close to unity, whereas the net uptake coefficient for H2O is much less.

Middlebrook, Ann M.↗

The kinetics of composite particle formation during mechanical alloying

The kinetics of composite particle formation during attritor milling of insoluble binary elemental powders have been examined. The effects of processing conditions (i.e., mill power, temperature, and charge ratio) on these kinetics were studied. Particle size distributions and fractions of elemental and composite particles were determined as functions of milling time and processing conditions. This allowed the deduction of phenomenological rate constants describing the propensity for fracture and welding during processing. For the mill-operating conditions investigated, the number of particles in the mill generally decreased with milling time, indicating a greater tendency for particle welding than fracture. Moreover, a bimodal size distribution is often obtained as a result of preferential welding. Copper and chromium 'alloy' primarily by encapsulation of Cr particles within Cu. This form of alloying also occurs in Cu-Nb alloys processed at low mill power and/or for short milling times. For other conditions, however, Cu-Nb alloys develop a lamellar morphology characteristic of mechanically alloyed two-phase ductile metals. Increasing mill power or charge (ball-to-powder weight) ratio (CR) increases the rate of composite particle formation.

Aikin, B. J. M.↗

Infrared and optical imaging of IRAS sources with CO outflow - A snapshot of early star formation

We present multiband imaging of three IRAS sources associated with CO molecular outflows. We find stellar density enhancements around all three IRAS sources. Optical and near-IR photometry indicates that at least 60 percent of the near-IR sources in the vicinity of the IRAS sources are pre-main-sequence stars. Using the photometric data at nbL and M, we are able to identify candidates for the near-IR counterparts of the IRAS sources. We also find that (1) the spectral energy distribution of the deeply embedded sources could be complicated by source confusion and scattered light from the young stellar objects; (2) star formation in the vicinity of the IRAS sources is a continuous process with an age span of 0.5-3 Myr; and (3) stellar density enhancement is probably a phenomenon found at the earliest stage of star formation.

Chen, H.↗

Numerical simulations of the formation and evolution of water ice clouds in the Martian atmosphere

A model of the formation, evolution, and description of Martian water ice clouds is developed which well reproduces the physical processes governing the microphysics of water ice cloud formation on Mars. The model is used to show that the cloud properties are most sensitive to the temperature profile, the number of days for which condensation previously occurred, the contact angle, and the presence of incoming meteoritic debris at the top of the atmosphere. The AM-PM differences in optical depths measured at the Viking Lander site were successfully simulated with the model, obtaining total column optical depths of ice of a few tenths in agreement with observations.

Michelangeli, Diane V.↗

Planet formation around millisecond pulsars

We present a model for the formation of planets in circular orbits around millisecond pulsars. We propose that the planets originate from a circumbinary excretion disk around a binary millisecond pulsar and show how physical conditions in such a disk lead to the eventual formation of planets.

Banit, Menashe↗

Interaction of field-aligned cold plasma flows with an equatorially-trapped hot plasma - Electrostatic shock formation

Effects of equatorially trapped hot plasma on the highly supersonic cold-plasma flow occurring during early stage plasmaspheric refilling are studied by means of numerical simulations. It is shown that the equatorially trapped hot ions set up a potential barrier for the cold ion beams and facilitate formation of electrostatic shocks by reflecting them from the equatorial region. Simulations with and without the hot plasma show different flow properties; the formation of electrostatic shocks occur only in the former case. The simulation with the hot plasma also reveals that the magnetic trapping in conjunction with the evolution of the electrostatic potential barrier produces ion velocity distribution functions consisting of a cold core and a hot ring in the perpendicular velocity. Such a distribution function provides a source of free energy for equatorial waves. The corresponding electron population is warm and field-aligned.

Singh, Nagendra↗

The formation of cyanopolyyne molecules in IRC + 10216

Molecule formation in the outer envelope of the carbon-rich star IRC + 10216 is investigated, with special emphasis on the chemistry of the cyanopolyynes HC(i)N (i = 3, 5, 7). Basic elements of the photochemical model of Glassgold et al. (1986) are revised. A dust model suitable to IRC + 10216 is used for which the extinction properties in the far-UV are those of 500 A amorphous carbon particles. A new chemical route to the formation of large cyanopolyynes is proposed, based on reactions of the radicals C3N and C5N with acetylene, and shown to be efficient. Our results agree qualitatively with observations of the spatial distributions of HCN, CN, HC3N, and C3N, but the calculated column densities of the higher-order cyanopolyynes appear to be too small. The amount of the allenic radical HC2N produced by molecular ion reactions with atomic N agrees with recent observations.

Cherchneff, Isabelle↗

Biofilm formation and control in a simulated spacecraft water system - Three year results

Two simulated spacecraft water systems are being used to evaluate the effectiveness of iodine for controlling microbial contamination within such systems. An iodine concentration of about 2.0 mg/L is maintained in one system by passing ultrapure water through an iodinated ion exchange resin. Stainless steel coupons with electropolished and mechanically-polished sides are being used to monitor biofilm formation. Results after three years of operation show a single episode of significant bacterial growth in the iodinated system when the iodine level dropped to 1.9 mg/L. This growth was apparently controlled by replacing the iodinated ion exchange resin, thereby increasing the iodine level. The second batch of resin has remained effective in controlling microbial growth down to an iodine level of 1.0 mg/L. SEM indicates that the iodine has impeded but may have not completely eliminated the formation of biofilm. Metals analyses reveal some corrosion in the iodinated system after 3 years of continuous exposure. Significant microbial contamination has been present continuously in a parallel noniodinated system since the third week of operation.

Schultz, John R.↗

Refrigerated Wind Tunnel Tests on Surface Coatings for Preventing Ice Formation

This investigation was conducted to determine the effectiveness of various surface coatings as a means for preventing ice formations on aircraft in flight. The substances used as coatings for these tests are divided into two groups: compounds soluble in water, and those which are insoluble in water. It was found that certain soluble compounds were apparently effective in preventing the formation of ice on an airfoil model, while all insoluble compounds which were tested were found to be ineffective.

Knight, Montgomery↗

Effect of Ice Formations on Section Drag of Swept NACA 63A-009 Airfoil with Partical-span Leading-edge Slat for Various Modes of Thermal Ice Protection

Studies were made to determine the effect of ice formations on the section drag of a 6.9-foot-chord 36 degree swept NACA 63A-009 airfoil with partial-span leading-edge slat. In general, the icing of a thin swept airfoil will result in greater aerodynamic penalties than for a thick unswept airfoil. Glaze-ice formations at the leading edge of the airfoil caused large increases in section drag even at liquid-water content of 0.39 gram per cubic meter. The use of an ice-free parting strip in the stagnation region caused a negligible change in drag compared with a completely unheated airfoil. Cyclic de-icing when properly applied caused the drag to decrease almost to the bare-airfoil drag value.

PROTUBERANCES - BODIES↗

Formation and Combustion of Smoke in Laminar Flames

The nature and formation of smoke and its combustion were investigated. Smoke, which consist of tiny mesomorphous crystals tightly packed into popcorn-ball-like particles that agglomerate to give filaments, was found to contain about 5 percent of the hydrogen originally present in the fuel. Factors affecting smoke formation were studied in both diffusion flames and premixed Bunsen flames. It is suggested that smoking tendency increases with increasing stability of the carbon skeleton of the molecule, as determined by relative bond strength.

Schalla, Rose L↗

Supersaturation in the spontaneous formation of nuclei in water vapor

According to experience, a certain supersaturation is required for condensation of water vapor in the homogeneous phase; that is, for inception of the condensation, at a prescribed temperature, the water vapor partial pressure must lie above the saturation pressure. The condensation starts on so-called condensation nuclei. Solid or liquid suspended particles may serve as nuclei; these particles may either a priori be present in the gas phase (dust, soot), or may spontaneously be formed from the vapor molecules to be condensed themselves. Only the second case will be considered. Gas ions which facilitate the spontaneous formation of nuclei may be present or absent. The supersaturations necessary for spontaneous nucleus formation are in general considerable higher than those in the presence of suspended particles.

CONDENSATION↗

Ice Formation on Wings

This report makes use of the results obtained in the Gottingen ice tunnel in which the atmospheric conditions are simulated and the process of ice formation photographed. The effect of ice formation is threefold: 1) added weight to the airplane; 2) a change in the lift and drag forces; 3) a change in the stability characteristics.

Ritz, L↗