Search NASA⌕ Search

SEARCH · Search NASA

Results for “height estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Correlation of sigma deg (0 deg) inferred wind speed estimates with NOAA hindcast data

Microwave remote sensing is discussed in terms of using GEOS-3 data to infer surface wind speed. Topics covered include: determining surface wind speed from backscattering, estimating surface winds from near normal incidence scattering, and response of the centimeter wavelength components of the ocean surface height spectrum to the wind.

Brown, G. S.↗

A scheme for computing surface fluxes from mean flow observations

A computational method for estimating turbulent surface stress, sensible heat flux, and humidity flux from mean velocity, temperature, and humidity at a single height in the atmospheric surface layer is presented. The method is based on coupling a Monin-Obukhov similarity profile to a 'force-restore' formulation for the evolution of surface soil temperature to yield the local values of shear stress, heat flux, and surface temperature. In addition to reference-level mean flow properties, the parameters required to implement this method are the thermal heat capacity of the soil, the surface aerodynamic roughness, latitude, solar declination, surface albedo, surface emissivity, and atmospheric transmissivity. Sample calculations are presented for (1) constant atmospheric forcing at the reference level, and (2) variable atmospheric forcing corresponding to Kahle's (1977) measurements of windspeed, air temperature, and radiometer soil surface temperature under dry vegetatively sparse conditions in the Mohave Desert, Calif.

Hoffert, M. I.↗

Treatment of geodetic leveling in the integrated geodesy approach

Integrated geodesy is a method in which a wide variety of surveying measurements are modeled in terms of geometric positions and the earth's geopotential. Using heterogeneous data, both geometric and gravimetric quantities are simultaneously estimated by a least-squares procedure. Heretofore, geodetic leveling differences were reduced into pseudo-observables using assumed values of gravity prior to their inclusion into integrated geodesy least-squares adjustments. The errors in estimates of geometric and gravimetric quantities obtained from integrated geodesy adjustments of geodetic leveling difference, potential differences and Helmert height differences are compared.

Milbert, Dennis G.↗

Airborne Differential Doppler Weather Radar

The Precipitation Radar aboard the Tropical Rain Measuring Mission (TRMM) Satellite has shown the potential for spaceborne sensing of snow and rain by means of an incoherent pulsed radar operating at 13.8 GHz. The primary advantage of radar relative to passive instruments arises from the fact that the radar can image the 3-dimensional structure of storms. As a consequence, the radar data can be used to determine the vertical rain structure, rain type (convective/stratiform) effective storm height, and location of the melting layer. The radar, moreover, can be used to detect snow and improve the estimation of rain rate over land. To move toward spaceborne weather radars that can be deployed routinely as part of an instrument set consisting of passive and active sensors will require the development of less expensive, lighter-weight radars that consume less power. At the same time, the addition of a second frequency and an upgrade to Doppler capability are features that are needed to retrieve information on the characteristics of the drop size distribution, vertical air motion and storm dynamics. One approach to the problem is to use a single broad-band transmitter-receiver and antenna where two narrow-band frequencies are spaced apart by 5% to 10% of the center frequency. Use of Ka-band frequencies (26.5 GHz - 40 GHz) affords two advantages: adequate spatial resolution can be attained with a relatively small antenna and the differential reflectivity and mean Doppler signals are directly related to the median mass diameter of the snow and raindrop size distributions. The differential mean Doppler signal has the additional property that this quantity depends only on that part of the radial speed of the hydrometeors that is drop-size dependent. In principle, the mean and differential mean Doppler from a near-nadir viewing radar can be used to retrieve vertical air motion as well as the total mean radial velocity. In the paper, we present theoretical calculations for the differential reflectivity and Doppler as functions of the center frequency, frequency difference, and median mass diameter. For a fixed pair of frequencies, the detectability of the differential signals can be expressed as the number of independent samples required to detect rain or snow with a particular median mass diameter. Because sampling numbers on the order of 1000 are needed to detect the differential signal over a range of size distributions, the instrument must be confined to a near-nadir, narrow swath. Radar measurements from a zenith directed radar operated at 9.1 GHz and 10 GHz are used to investigate the qualitative characteristics of the differential signals. Disdrometer and rain gauge data taken at the surface, just below the radar, are used to test whether the differential signals can be used to estimate characteristics of the raindrop size distribution.

Meneghini, R.↗

Extratropical Stratosphere-Troposphere Mass Exchange

Global net mass flux between the troposphere and the stratosphere can be computed simply by estimating the heating rate along the 380K isentropic surface and the time rate of change of the lower most stratosphere (region between the tropopause and 380K). Given the net tropopause mass flux and the cross tropopause diabatic flux, the residual adiabatic mass flux can be estimated. These fluxes have been computed using three different meteorological data sets, the FVGCM and two assimilation data sets, FVDAS, and UKMO, using the 3.5 PVU defined tropopause. For all three data sets, the extratropical diabatic flux across the tropopause is generally to be larger than the net flux cross tropopause flux implying that there is a net extra-tropical adiabatic flux of air from the troposphere into the middle world stratosphere. This adiabatic flux is four to five times larger than the flux into the stratosphere across the tropical tropopause. For the FVDAS, the tropopause diabatic flux is smaller than UKMO as a result of colder tropopause temperatures. The difference in the diabatic mass fluxes by almost a factor of two between the two data assimilation meteorological analyses is much larger than the interannual variability in the UKMO or FVGCM data sets. Compared to radiosonde estimated tropopause temperatures, both data assimilation tropopause temperatures are warm biased due to a low bias in the tropopause heights. These comparisons point to the PV determination of the tropopause height as the source of the differences in the mass fluxes.

Schoeberl, Mark↗

The High Resolution Tropospheric Ozone Residual

The co-flight of the MLS stratospheric limb sounder and the Ozone Monitoring Instrument (OMI) provides the capability of computing the Tropospheric Ozone Residual (TOR) in much greater detail [Ziemke et al., 2006]. Using forward trajectory calculations of MLS ozone measurements combined with OMI column ozone we have developed a high horizontal resolution tropospheric ozone residual (HTOR) which can provide even more detail than the standard TOR product. HTOR is especially useful for extra-tropical studies of tropospheric ozone transport. We find that both the Pacific pollution corridor (East Asia to Alaska) and the Atlantic pollution corridor (North America east coast to Europe) are also preferred locations for strat-trop folds leading to systematic overestimates of pollution amounts. In fact, fold events appear to dominate extra-tropical Northern Hemisphere day-to-day maps of HTOR. Model estimates of the tropospheric column are in reasonable agreement with the HTOR amounts when offsets due to different tropopause height calculations are taken into consideration.

Schoeberl, Mark R.↗

Evolution of the Equatorial Oscillation in Saturn's Stratosphere Between 2005 and 2010 from Cassini/CIRS Limb Data Analysis

We present an analysis of thermal infrared spectra acquired in limb viewing geometry by Cassini/CIRS in February 2010. We retrieve vertical profiles of Saturn's stratospheric temperature from 20 hPa to 10 (exp -2) hPa, at 9 latitudes between 20 deg N and 20 deg S. Using the gradient thermal wind equation, we derive a map of the zonal wind field. Both the temperature and the zonal wind vertical profiles exhibit an oscillation in the equatorial region. These results are compared to the temperature and zonal wind maps obtained from 2005-2006 CIRS limb data, when this oscillation was first reported. In both epochs, strong temperature anomalies at the equator (up to 20K) are consistent with adiabatic heating (cooling) due to a sinking (rising) motion at a speed of 0.1 - 0.2 mm/s. Finally, we show that the altitude of the maximum eastward wind has moved downwards by 1.3 scale heights in 4.2 years, hence with a 'phase' speed of approximately 0.5 mm/s. This rate is consistent with the estimated period of 14.7 years for the equatorial oscillation, and requires a local zonal acceleration of 1.1 x 10(exp -6) m.s(exp -2) at the 2.5 hPa pressure level. This downward propagation of the oscillation is consistent with it being driven by absorption of upwardly propagating waves.

Guerlet, S.↗

The ACCP Inclined Orbit Project: Enabling New and Synergistic Aerosol Remote Sensing Inversions

Atmospheric aerosols have high spatiotemporal variations due to their diverse sources including windblown dust, wildfires, volcanic eruptions, and anthropogenic emissions. These aerosols also have strong diurnal emission characteristics that influence long-range transport, air quality, Earth’s radiation budget, biogeochemical cycles, and weather forecasting. While current sensors can measure the steady-state of global 3D cloud and aerosol properties, we lack the observational datasets to discover the diurnal variability of aerosols, even at seasonal and regional scales, because these missions utilize sun synchronous orbits. An Aerosols and Clouds, Convection and Precipitation (ACCP) observing system has been established as part of NASA’s new Earth System Observatory (ESO) to fulfill the science needs presented in the 2017 Earth Science Decadal Survey. The selected ACCP architecture encompasses sensors in two orbit planes, one of which utilizes an inclined orbit (nominally ~55 degrees at a 407 km altitude) to advance our understanding of aerosol and cloud properties and target the dynamics of the cloud and aerosol processes on sub-daily time scales. The anticipated instrumentation suite for the ACCP Inclined Orbit Project is a Stereo Camera System, Polarimeter, Microwave Radiometer, Two-Frequency Radar, and Backscatter Lidar. The polarimeter is expected to have multiple wavelength bands and viewing angles to enable accurate retrievals of aerosol microphysical and optical properties. The backscatter lidar will provide vertical profiles of attenuated backscatter and depolarization ratio at two wavelengths, with better daytime signal-to-noise ratio than previous space-based lidar systems to improve aerosol detection/typing and estimates of aerosol optical properties. The stereo camera system, while designed primarily for clouds, will also provide aerosol plume heights and air motions at the plume heights. This invited presentation will provide (1) an overview of the ACCP Inclined Orbit Project, (2) a description of the new sensor capabilities and orbital characteristics, and (3) a preview of the potential for new synergistic aerosol inversion techniques.

John E Yorks↗

Little vertical and circumferential variations in stem xylem water Δ 2 H and Δ 18 O in three tree species

Vertical and circumferential patterns of xylem water isotope signatures in large trees are rarely characterized but may influence interpretation of water source investigations and soil/xylem water isotope offsets. Furthermore, to examine vertical and circumferential variation in xylem water δ 2 H and δ 18 O, we collected xylem tissue at 5 heights (0, 1, 4, 7 and 10 m) from three replicate trees of three species with contrasting xylem anatomy, two angiosperms (Liquidambar styraciflua and Quercus nigra) and one gymnosperm (Pinus taeda). Concurrently, we also determined δ 2 H and δ 18 O of groundwater, soil water, and recent precipitation. On a different day, we collected circumferential samples at 1 m from the same trees to test for sectorality effects. Water from stem and soil samples were cryogenically extracted and analyzed for δ 2 H and δ 18 O. Mean xylem water δ 2 H and δ 18 O were significantly different between species, both vertically and circumferentially. We did not find significant (p = 0.05) systematic variation in δ 2 H or δ 18 O with height. We found no significant evidence for sectorality effects on δ 2 H, δ 18 O. Variances of vertical synoptic xylem water δ 2 H or δ 18 O were similar between species, 7.2–10.4‰ for δ 2 H and 0.58–0.81‰ for δ 18 O. Circumferential variances were also similar between species, 4.0–6.0 for δ 2 H and 0.37–0.44 for δ 18 O. A mixing model showed that sweetgum, water oak and loblolly pine, were drawing most of their water from deep soil from 45 to 190 cm (84.7, 68.4 and 53.2%, respectively) however, soil water-excess values indicate δ 2 H fractionation effects on these estimates. Dual isotope mixing model evaluation with single and multiple sample configurations showed that source water estimates were not affected by within tree variability of xylem water signatures. Xylem water δ 2 H and δ 18 O variability with height or circumference, was 3.2 and 2.7 times less than between tree variation because of transient temporal and spatial processes and is, therefore, not likely to affect interpretations of water sourcing in these three species.

59 BASIC BIOLOGICAL SCIENCES↗

NREL ASSIST Barge / Thermodynamic retrievals TROPoe v0.19

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.19 (Turner and Löhnert, 2014; Turner and Blumberg, 2019; Turner and Löhnert, 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NREL ASSIST-II (SN 12) infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height from a collocated NREL Vaisala CL51 ceilometer (when available) or vertically staring Halo XR lidar, and surface temperature, relative humidity, and pressure from the collocated Oregon State University met tower. The full pipeline to run the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al., 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at Upton, NY.

17 WIND ENERGY↗

Estimating slash pine biomass using radar backscatter

L-band HV multiple-incidence-angle aircraft synthetic aperture radar (SAR) data were analyzed in relation to average stand biomass, basal area, and tree height for 55 slash pine plantations located in northern Florida. This information was used to develop a system of equations to predict average stand biomass as a function of L-band (24.5-cm) radar backscatter. The system of equations developed in this study using three-stage least-squares and combinatorial screening accounted for 97 percent of the variability observed in average stand biomass per hectare. When applied to an independent data set, the biomass equations had an average bias of less than 1 percent with a standard error of approximately 3 percent. These results indicate that future Shuttle Imaging Radar Systems (e.g., SIR-C, which will have cross-polarized radar sensors) should be able to obtain better estimates of forest biomass than were obtained with previous satellite radar missions, which utilized only HH-polarized SAR data.

Hussin, Yousif Ali↗

Airburst & Blast Damage Modeling Sensitivities for Asteroid Impact Risk Assessment

Blast overpressure from a high-energy airburst or surface impact is the primary source of damage from potentially hazardous asteroid strikes. There are many sources of uncertainty in evaluating these potential damage risks, both in the approaches used to model the entry, breakup, and airburst behaviors of diverse asteroid properties, and in the blast modeling approaches used to estimate the ground damage from these very large-scale, high-energy events. In this study, we use NASA’s Probabilistic Asteroid Impact Risk (PAIR) model to investigate trends and sensitivities in asteroid airburst altitudes and the resulting blast damage estimates across a range of asteroid sizes. In particular, we show how uncertainties in asteroid breakup behavior and effective airburst altitudes combine with height-of-burst (HOB) blast damage models to produce key sensitivities and trends in the amount of damage expected from different asteroid sizes and airburst altitudes. We show airburst altitude ranges and probabilities stemming from asteroid entry and breakup modeling uncertainties, compare differences between traditional nuclear-based HOB blast models and simulation-based HOB models for larger asteroid energies, and show how the resulting interplay between likely burst altitudes and optimal burst heights affects blast damage trends across different asteroid sizes. Finally, we combine the relative likelihoods of asteroid sizes, airburst altitudes, and resulting blast damage severity to evaluate what airburst regimes pose the highest overall level of risk (when considering both the relative likelihood and scale of potential damage) for a mid-sized asteroid threat scenario. Results show what asteroid size regimes are most sensitive to airburst and blast modeling uncertainties, provide insight into nonintuitive trends in the size and severity of blast damage expected from different airburst events, and highlight where additional blast modeling studies or refinements may help improve future impact risk estimates

ATAP↗

Milky Way Tomography with K and M Dwarf Stars: The Vertical Structure of the Galactic Disk

We use the number density distributions of K and M dwarf stars with vertical height from the Galactic disk, determined using observations from the Sloan Digital Sky Survey, to probe the structure of the Milky Way disk across the survey’s footprint. Using photometric parallax as a distance estimator we analyze a sample of several million disk stars in matching footprints above and below the Galactic plane, and we determine the location and extent of vertical asymmetries in the number counts in a variety of thin- and thick-disk subsamples in regions of some 200 square degrees within 2 kpc in vertical distance from the Galactic disk. These disk asymmetries present wave-like features as previously observed on other scales and at other distances from the Sun. We additionally explore the scale height of the disk and the implied offset of the Sun from the Galactic plane at different locations, noting that the scale height of the disk can differ significantly when measured using stars only above or only below the plane. Moreover, we compare the shape of the number density distribution in the north for different latitude ranges with a fixed range in longitude and find the shape to be sensitive to the selected latitude window. We explain why this may be indicative of a change in stellar populations in the latitude regions compared, possibly allowing access to the systematic metallicity difference between thin- and thick-disk populations through photometry.

79 ASTRONOMY AND ASTROPHYSICS↗

Unveiling acoustic physics of the CMB using nonparametric estimation of the temperature angular power spectrum for Planck

Estimation of the angular power spectrum is one of the important steps in Cosmic Microwave Background (CMB) data analysis. Here, we present a nonparametric estimate of the temperature angular power spectrum for the Planck 2013 CMB data. The method implemented in this work is model-independent, and allows the data, rather than the model, to dictate the fit. Since one of the main targets of our analysis is to test the consistency of the ΛCDM model with Planck 2013 data, we use the nuisance parameters associated with the best-fit ΛCDM angular power spectrum to remove foreground contributions from the data at multipoles ℓ ≥50. We thus obtain a combined angular power spectrum data set together with the full covariance matrix, appropriately weighted over frequency channels. Our subsequent nonparametric analysis resolves six peaks (and five dips) up to ℓ ∼1850 in the temperature angular power spectrum. We present uncertainties in the peak/dip locations and heights at the 95% confidence level. We further show how these reflect the harmonicity of acoustic peaks, and can be used for acoustic scale estimation. Based on this nonparametric formalism, we found the best-fit ΛCDM model to be at 36% confidence distance from the center of the nonparametric confidence set—this is considerably larger than the confidence distance (9%) derived earlier from a similar analysis of the WMAP 7-year data. Another interesting result of our analysis is that at low multipoles, the Planck data do not suggest any upturn, contrary to the expectation based on the integrated Sachs-Wolfe contribution in the best-fit ΛCDM cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

Geometrical description in binary composites and spectral density representation

In this review, the dielectric permittivity of dielectric mixtures is discussed in view of the spectral density representation method. A distinct representation is derived for predicting the dielectric properties, permittivities {var_epsilon}, of mixtures. The presentation of the dielectric properties is based on a scaled permittivity approach, {zeta} = ({var_epsilon}{sub e} - {var_epsilon}{sub m})({var_epsilon}{sub i} - {var_epsilon}{sub m}){sup -1}, where the subscripts e, m and i denote the dielectric permittivities of the effective, matrix and inclusion media, respectively [Tuncer, E. J. Phys.: Condens. Matter 2005, 17, L125]. This novel representation transforms the spectral density formalism to a form similar to the distribution of relaxation times method of dielectric relaxation. Consequently, I propose that any dielectric relaxation formula, i.e., the Havriliak-Negami empirical dielectric relaxation expression, can be adopted as a scaled permittivity. The presented scaled permittivity representation has potential to be improved and implemented into the existing data analyzing routines for dielectric relaxation; however, the information to extract would be the topological/morphological description in mixtures. To arrive at the description, one needs to know the dielectric properties of the constituents and the composite prior to the spectral analysis. To illustrate the strength of the representation and confirm the proposed hypothesis, the Landau-Lifshitz/Looyenga (LLL) [Looyenga, H. Physica 1965, 31, 401] expression is selected. The structural information of a mixture obeying LLL is extracted for different volume fractions of phases. Both an in-house computational tool based on the Monte Carlo method to solve inverse integral transforms and the proposed empirical scaled permittivity expression are employed to estimate the spectral density function of the LLL expression. The estimated spectral functions for mixtures with different inclusion concentration compositions show similarities; they are composed of a couple of bell-shaped distributions, with coinciding peak locations but different heights. It is speculated that the coincidence in the peak locations is an absolute illustration of the self-similar fractal nature of the mixture topology (structure) created with the LLL expression. Consequently, the spectra are not altered significantly with increased filler concentration level - they exhibit a self-similar spectral density function for different concentration levels. Last but not least, the estimated percolation strengths also confirm the fractal nature of the systems characterized by the LLL mixture expression. It is concluded that the LLL expression is suitable for complex composite systems that have hierarchical order in their structure. These observations confirm the finding in the literature.

36 MATERIALS SCIENCE↗

Effects of topography on tropical forest structure depend on climate context

Abstract Topography affects abiotic conditions which can influence the structure, function and dynamics of ecological communities. An increasing number of studies have demonstrated biological consequences of fine‐scale topographic heterogeneity but we have a limited understanding of how these effects depend on the climate context. We merged high‐resolution (1 m 2 ) data on topography and canopy height derived from airborne lidar with ground‐based data from 15 forest plots in Puerto Rico distributed along a precipitation gradient spanning c . 800–3,500 mm/year. Ground‐based data included species composition, estimated above‐ground biomass (AGB), and two key functional traits (wood density and leaf mass per area, LMA) that reflect resource‐use strategies and a trade‐off between hydraulic safety and hydraulic efficiency. We used hierarchical Bayesian models to evaluate how the interaction between topography × climate is related to metrics of forest structure (i.e. canopy height and AGB), as well as taxonomic and functional alpha‐ and beta‐diversity. Fine‐scale topography (characterized with the topographic wetness index, TWI) significantly affected forest structure and the strength (and in some cases direction) of these effects varied across the precipitation gradient. In all plots, canopy height increased with topographic wetness but the effect was much stronger in dry compared to wet forest plots. In dry forest plots, topographically wetter microsites also had higher levels of AGB but in wet forest plots, topographically drier microsites had higher AGB. Fine‐scale topography influenced functional composition but had only weak or non‐significant effects on taxonomic and functional alpha‐ and beta‐diversity. For instance, community‐weighted wood density followed a similar pattern to AGB across plots. We also found a marginally significant association between variation of wood density and topographic heterogeneity that depended on climate context. Synthesis . The effects of fine‐scale topographic heterogeneity on tropical forest structure and composition depend on the climate context. Our study demonstrates how a stronger integration of topographic heterogeneity across precipitation gradients could improve estimates of forest structure and biomass, and may provide insight to the ways that topography might mediate species responses to drought and climate change.

Muscarella, Robert↗

Technical Potential for Hydropower Capacity at Non-powered Dams

In the last decade, retrofits of existing nonpowered dams (NPDs) have made up the largest share of capacity increases for US hydropower. Accurate estimates of potential capacity and generation at NPDs help identify sites that may be worth investing in detailed feasibility analyses and design exploration. This dataset contains estimates of technical potential capacity and generation at 2,616 NPDs in the conterminous US. This is based on a subset of dams that were found by earlier resource assessments to have at least 100kW of theoretical potential. Historical daily streamflow (modeled or from USGS gauge records) and hydraulic head (based on historical observations or primary purpose and dam height) are the main inputs to the HydroGenerate model, which determines design flow, turbine efficiencies, and assumed friction losses and then calculates nominal capacity, daily generation, and capacity factor. These estimates represent the conditions over the historical period of 1980-2015, and are summarized on a monthly basis (i.e., averaged for each month of the year) and overall (i.e., nominal capacity, average annual generation (MWh), and average annual capacity factor). A total of nearly 4 GW capacity is estimated across all 2,616 NPDs included in the dataset.

Hansen, Carly [Oak Ridge National Laboratory (ORNL↗

Estimating Volume, Biomass, and Carbon in Hedmark County, Norway Using a Profiling LiDAR

A profiling airborne LiDAR is used to estimate the forest resources of Hedmark County, Norway, a 27390 square kilometer area in southeastern Norway on the Swedish border. One hundred five profiling flight lines totaling 9166 km were flown over the entire county; east-west. The lines, spaced 3 km apart north-south, duplicate the systematic pattern of the Norwegian Forest Inventory (NFI) ground plot arrangement, enabling the profiler to transit 1290 circular, 250 square meter fixed-area NFI ground plots while collecting the systematic LiDAR sample. Seven hundred sixty-three plots of the 1290 plots were overflown within 17.8 m of plot center. Laser measurements of canopy height and crown density are extracted along fixed-length, 17.8 m segments closest to the center of the ground plot and related to basal area, timber volume and above- and belowground dry biomass. Linear, nonstratified equations that estimate ground-measured total aboveground dry biomass report an R(sup 2) = 0.63, with an regression RMSE = 35.2 t/ha. Nonstratified model results for the other biomass components, volume, and basal area are similar, with R(sup 2) values for all models ranging from 0.58 (belowground biomass, RMSE = 8.6 t/ha) to 0.63. Consistently, the most useful single profiling LiDAR variable is quadratic mean canopy height, h (sup bar)(sub qa). Two-variable models typically include h (sup bar)(sub qa) or mean canopy height, h(sup bar)(sub a), with a canopy density or a canopy height standard deviation measure. Stratification by productivity class did not improve the nonstratified models, nor did stratification by pine/spruce/hardwood. County-wide profiling LiDAR estimates are reported, by land cover type, and compared to NFI estimates.

Nelson, Ross↗