Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrodynamics methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Extension of a coarse grained particle method to simulate heat transfer in fluidized beds

The heat transfer in a gas-solids fluidized bed is simulated with computational fluid dynamic-discrete element method (CFD-DEM) and coarse grained particle method (CGPM). In CGPM fewer numerical particles and their collisions are tracked by lumping several real particles into a computational parcel. Here, the assumption is that the real particles inside a coarse grained particle (CGP) are made from same species and share identical physical properties including density, diameter and temperature. The parcel-fluid convection term in CGPM is calculated using the same method as in DEM. For all other heat transfer mechanisms, we derive in this study mathematical expressions that relate the new heat transfer terms for CGPM to those traditionally derived in DEM. This newly derived CGPM model is verified and validated by comparing the results with CFD-DEM simulation results and experiment data. The numerical results compare well with experimental data for both hydrodynamics and temperature profiles. Finally, the proposed CGPM model can be used for fast and accurate simulations of heat transfer in large scale gas-solids fluidized beds.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2019

Coupled Geomechanical Modeling to Assess Cap Rock Integrity and Mechanical Fault Stability: Application to Farnsworth Field Unit Project

Abstract The SWP project is located in a mature waterflood undergoing conversion to CO2-WAG operations in the Farnsworth, Texas, USA. Anthropogenic CO2 is sourced from a fertilizer and an ethanol plant. This work utilizes Farnsworth’s full-field, history-matched, compositional hydrodynamic coupled geomechanical model for assessing the impact of stress changes observed through the history matched field life. Production and injection induced stress changes, fault stability and caprock integrity investigations are performed to project the potential for fault reactivation and the loss of caprock integrity under shear failure. A static mechanical earth model (MEM) was constructed for use in transient coupled geomechanical model based on the existing Southwest Regional Partnership (SWP) geological model. The static MEM inherits the stratigraphic and structural features of the geologic model and incorporates additional overburden, underburden, and sideburden formations required to impose mechanical boundary conditions. Mechanical properties were distributed in the 3D MEM through integration of geophysical logs and 3-dimensional seismic elastic inversion properties using a combination of Bayesian and stochastic interpolation methods. These data are further enhanced by lab derived strength and failure criteria for the caprock interval. Additionally, interpreted faults and other geological features were included as part of the static structural framework to fully represent subsurface hydraulic and mechanical systems and appropriately integrate heterogeneity. Two-way coupling of hydrodynamic flow and geomechanical simulations incorporates the Kozeny-Carman relationship for updating permeability and is history matched through primary, secondary (waterflooding) and tertiary (CO2 WAG) recovery periods before performing a twenty year forecast. Two-way simulations are performed to understand the effective stress perturbations imposed by field operations: water injection and the more recent implementation of WAG. Evaluation of Mohr circles with liquid production and field pressure charts as well as slip tendency and distance to failure metrics indicate that neither our faults or cap rock are critically stressed. This paper presents the results of the Farnsworth initial attempts to integrate the seismic driven 3D MEM into coupled hydrodynamic geomechanical history match simulation workflow.

02 PETROLEUM↗
DOE OSTI2017

Response theory of the ergodic many-body delocalized phase: Keldysh Finkel’stein sigma models and the 10-fold way

We derive the finite temperature Keldysh response theory for interacting fermions in the presence of quenched short-ranged disorder, as applicable to any of the 10 Altland–Zirnbauer classes in an Anderson delocalized phase with at least a U(1) continuous symmetry. In this formulation of the interacting Finkel’stein nonlinear sigma model, the statistics of one-body wave functions are encoded by the constrained matrix field, while physical correlations follow from the hydrodynamic density or spin response field, which decouples the interactions. Integrating out the matrix field first, we obtain weak (anti) localization and Altshuler–Aronov quantum conductance corrections from the hydrodynamic response function. This procedure automatically incorporates the correct infrared cutoff physics, and in particular gives the Altshuler–Aronov–Khmelnitsky (AAK) equations for dephasing of weak (anti)localization due to electron–electron collisions. We explicate the method by deriving known quantumcorrections in two dimensions for the symplectic metal class AII, as well as the spin-SU(2) invariant superconductor classes C and CI. We show that quantum conductance corrections due to the special modes at zero energy in nonstandard classes are automatically cut off by temperature, as previously expected, while the Wigner–Dyson class Cooperon modes that persist to all energies are cut by dephasing. We also show that for short-ranged interactions, the standard self-consistent solution for the dephasing rate is equivalent to a particular summation of diagrams via the self-consistent Born approximation. This should be compared to the corresponding AAK solution for long-ranged Coulomb interactions, which exploits the Markovian noise correlations induced by thermal fluctuations of the electromagnetic field. We discuss prospects for exploring the many-body localization transition as a dephasing catastrophe in short-range interacting models, as encountered by approaching from the ergodic side. - Highlights: • The Keldysh response theory for disordered, interacting fermions is derived. • The theory applies to any Altland–Zirnbauer class with at least a U(1) symmetry. • The correct infrared physics at finite temperature is automatically incorporated. • The Altshuler–Aronov–Khmelnitsky equations for dephasing are systematically derived. • A strategy to explore the MBL transition as a dephasing catastrophe is proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Dark matter self-interactions and small scale structure

We review theories of dark matter (DM) beyond the collisionless paradigm, known as self-interacting dark matter (SIDM), and their observable implications for astrophysical structure in the Universe. Self-interactions are motivated, in part, due to the potential to explain long-standing (and more recent) small scale structure observations that are in tension with collisionless cold DM (CDM) predictions. Simple particle physics models for SIDM can provide a universal explanation for these observations across a wide range of mass scales spanning dwarf galaxies, low and high surface brightness spiral galaxies, and clusters of galaxies. At the same time, SIDM leaves intact the success of $Λ$CDM cosmology on large scales. This report covers the following topics: (1) small scale structure issues, including the core–cusp problem, the diversity problem for rotation curves, the missing satellites problem, and the too-big-to-fail problem, as well as recent progress in hydrodynamical simulations of galaxy formation; (2) N-body simulations for SIDM, including implications for density profiles, halo shapes, substructure, and the interplay between baryons and self-interactions; (3) semi-analytic Jeans-based methods that provide a complementary approach for connecting particle models with observations; (4) merging systems, such as cluster mergers (e.g., the Bullet Cluster) and minor infalls, along with recent simulation results for mergers; (5) particle physics models, including light mediator models and composite DM models; and (6) complementary probes for SIDM, including indirect and direct detection experiments, particle collider searches, and cosmological observations. In conclusion, we provide a summary and critical look for all current constraints on DM self-interactions and an outline for future directions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Experimental study on flow characterization of a rectangular spouted bed by image processing

Systematic image processing methods are applied to characterize gas-solid flow under different operating conditions in a 30.2 mm x 101.6 mm rectangular spouted bed. Geldart D particles are imaged using a highspeed video camera. Superficial gas velocity, initial bed height, and nozzle size are investigated as influence factors. By applying adaptive thresholding and logical operation to the video frames, the original color images are transformed into binary images exposing detailed boundary information. By analyzing the binary image using a self-developed algorithm in combination with mask operations, the bed height is successfully determined, through which the variation of the bed expansion ratio with superficial gas velocity can be obtained. Additionally, the application of image morphological operations, i.e. dilation and erosion on the binarized images ensures the accurate identification of the contours of the jet and fountain so that the jet and fountain heights can be determined. Based on the image processing methods, the variation of bed expansion ratio, jet height and fountain height with the three influence factors are discussed. The current study highlights the application of image analysis in investigating the flow characterization and obtaining more hydrodynamic information in a rectangular spouted bed.

42 ENGINEERING↗
NASA NTRS1990

Direct simulation for the instability and breakup of laminar liquid jets

A direct numerical simulation method is described for predicting the deformation of laminar liquid jets. In the present nonlinear direct simulation, the convective term, which has been discarded in past linear analyses by Rayleigh and others, is included in the hydrodynamic equations. It is shown that only by maintaining full complexity of the nonlinear surface tension term accurate drop formation can be predicted. The continuity and momentum equations in the transient form are integrated on an adaptive grid, conforming the jet and surface wave shape. The equations, which are parabolic in time and elliptic in space, are solved by a TVD scheme with characteristic flux splitting. The results of the present work are discussed and compared with available measurements and other analyses. The comparison shows that among the predictions, the current 1-D direct simulation results agree best with the experimental data. Furthermore, the computer time requirements are much (an order of magnitude) smaller than those of previously reported multidimensional analyses.

Chuech, S. G.↗
NASA NTRS2019

Automated Classification of Transient Contamination in Stationary Acoustic Data

An automated procedure for the classification of transient contamination of stationary acoustic data is proposed and analyzed. The procedure requires the assumption that the stationary acoustic data of interest can be modeled as a band-limited, Gaussian random process. It also requires that the transient contamination be of higher variance than the acoustic data of interest. When these assumptions are satisfied, it is a blind separation procedure, aside from the initial input specifying how to subdivide the time series of interest. No a priori threshold criterion is required. Simulation results show that for a sufficient number of blocks, the method performs well, as long as the occasional false positive or false negative is acceptable. The effectiveness of the procedure is demonstrated with an application to experimental wind tunnel acoustic test data which are contaminated by hydrodynamic gusts.

Bahr, Christopher J.↗
DOE OSTI2023

Revisiting the empirical particle-fluid coupling model used in DEM-CFD by high-resolution DEM-LBM-IMB simulations: A 2D perspective

The work investigates the applicability of the unresolved Computational Fluid Dynamics and Discrete Element Method (CFDDEM) technique based on empirical equations for fluid-particle coupling. We first carry out a series of representative volume element simulations using the high-resolution particle-resolved Lattice Boltzmann method and Discrete Element Method (LBMDEM) coupled by an Immersed Moving Boundary (IMB) scheme. Then, we compare the results obtained by both LBMDEM and empirical equations used in unresolved CFDDEM with analytical solutions. It is found that the existing empirical equations used in solving fluid-particle interactions in 2D CFDDEM fail to accurately calculate the hydrodynamic force applied to solid particles. The underlying reason is that the existing empirical models are obtained based on 3D experimental results and thus are not applicable to 2D problems. Based on the simulation results, a new drag coefficient model is then proposed. The estimated drag forces using the new model are compared favourably with the simulated ones, indicating the good performance of the proposed model.

42 ENGINEERING↗
NASA NTRS1992

The electrodynamic and hydrodynamic phenomena in magnetically-levitated molten droplets. I - Steady state behavior

A mathematical formulation is given and computed results are presented describing the behavior of electromagnetically-levitated metal droplets under the conditions of microgravity. In the formulation the electromagnetic force field is calculated using a modification of the volume integral method and these results are then combined with the FIDAP code to calculate the steady state melt velocities. The specific computational results are presented for the conditions corresponding to the planned IML-2 Space Shuttle experiment, using the TEMPUS device, which has separate 'heating' and 'positioning' coils. While the computed results are necessarily specific to the input conditions, some general conclusions may be drawn from this work. These include the fact that for the planned TEMPUS experiments to positioning coils will produce only a weak melt circulation, while the heating coils are like to produce a mildly turbulent recirculating flow pattern within the samples. The computed results also allow us to assess the effect of sample size, material properties and the applied current on these phenomena.

Zong, Jin-Ho↗
NASA NTRS1923

Hydrodynamic tests for determining the take-off characteristics of seaplanes

The resistance of water, even at low speeds, may be such as to render it impossible to take off. For this type of aircraft, it is therefore especially important to determine the take-off characteristics. A new and simple graphical method is given and appears to be the only one for the complete solution of the problem.

FLOATS - CHARACTERISTICS↗
DOE OSTI2013

CASTRO: A NEW COMPRESSIBLE ASTROPHYSICAL SOLVER. III. MULTIGROUP RADIATION HYDRODYNAMICS

We present a formulation for multigroup radiation hydrodynamics that is correct to order O(v/c) using the comoving-frame approach and the flux-limited diffusion approximation. We describe a numerical algorithm for solving the system, implemented in the compressible astrophysics code, CASTRO. CASTRO uses a Eulerian grid with block-structured adaptive mesh refinement based on a nested hierarchy of logically rectangular variable-sized grids with simultaneous refinement in both space and time. In our multigroup radiation solver, the system is split into three parts: one part that couples the radiation and fluid in a hyperbolic subsystem, another part that advects the radiation in frequency space, and a parabolic part that evolves radiation diffusion and source-sink terms. The hyperbolic subsystem and the frequency space advection are solved explicitly with high-order Godunov schemes, whereas the parabolic part is solved implicitly with a first-order backward Euler method. Our multigroup radiation solver works for both neutrino and photon radiation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Investigation of the influence of frictional viscosity regularization on quasi-static gas-solid flow predictions in a conical spouted bed with non-porous draft tube

The stress in the quasi-static particle flow is often modeled through the Mohr-Coulomb failure criterion. In the extension to complex three-dimensional flows, a granular viscosity is introduced through a tensorial rheology and the deviatoric frictional stress tensor is assumed aligned with the strain rate tensor. This granular viscosity is singular as the shear rate approaches zero, regardless of the local rheology. We discuss the influence of regularizing such a frictional viscosity on the particle circulation rate and other measured characteristics in a laboratory scale draft tube spouted bed. Here, the friction between particles is modeled either with a constant Coulomb rheology or using a local particle pressure and strain-rate based friction known as μ ( I )-rheology. The predictions appear very dependent on the regularization parameter introduced by the method. The mean properties of the flow (e.g. circulation and pressure drop) monotonically converge towards the measurements when the regularization parameter tends to zero. In other respects, the two regularization models regarded in this study induced similar hydrodynamics within the spouted bed of interest. But the analysis of the conditional averages of the inertial number and the fraction of the solids in the quasi-static regime shows that the extent and staticity of the quasi-static region is sensitive to changes to the regularization parameter or regularization function.

36 MATERIALS SCIENCE↗
DOE OSTI2015

On the interaction between the external magnetic field and nanofluid inside a vertical square duct

In this paper, we numerically study how the external magnetic field influences the flow and thermal characteristics of nanofluid inside a vertical square duct. The flow is considered to be laminar and hydrodynamically as well as thermally developed, whereas the thermal boundary condition of constant heat flux per unit axial length with constant peripheral temperature at any cross section, is assumed. The governing equations are solved using the spectral method and the finite difference method. Excellent comparison is noted in the numerical results given by the two methods but the spectral method is found to be superior in terms of both efficiency and accuracy. We have noted that the flow reversal due to high Raleigh number may be controlled by applying an external magnetic field of suitable strength. Moreover, the Nusselt number is found to be almost a linear function of the nanoparticle volume fraction parameter, for different values of the Raleigh number and the magnetic parameter.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Simulating Lindbladian evolution with non-Abelian symmetries: Ballistic front propagation in the SU(2) Hubbard model with a localized loss

In this work, we develop a non-Abelian time evolving block decimation (NA-TEBD) approach to study open systems governed by Lindbladian time evolution, while exploiting an arbitrary number of Abelian or non-Abelian symmetries. We illustrate this method in a one-dimensional fermionic SU(2) Hubbard model on a semi-infinite lattice with localized particle loss at one end. We observe a ballistic front propagation with strongly renormalized front velocity, and a hydrodynamic current density profile. For large loss rates, a suppression of the particle current is observed, as a result of the quantum Zeno effect. Operator entanglement is found to propagate faster than the depletion profile, preceding the latter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Fluctuating hydrodynamics of multi-species reactive mixtures

We formulate and study computationally the fluctuating compressible Navier-Stokes equations for reactive multi-species fluid mixtures. We contrast two different expressions for the covariance of the stochastic chemical production rate in the Langevin formulation of stochastic chemistry, and compare both of them to predictions of the chemical master equation for homogeneous well-mixed systems close to and far from thermodynamic equilibrium. We develop a numerical scheme for inhomogeneous reactive flows, based on our previous methods for non-reactive mixtures [Balakrishnan , Phys. Rev. E 89, 013017 (2014)]. We study the suppression of non-equilibrium long-ranged correlations of concentration fluctuations by chemical reactions, as well as the enhancement of pattern formation by spontaneous fluctuations. Good agreement with available theory demonstrates that the formulation is robust and a useful tool in the study of fluctuations in reactive multi-species fluids. At the same time, several problems with Langevin formulations of stochastic chemistry are identified, suggesting that future work should examine combining Langevin and master equation descriptions of hydrodynamic and chemical fluctuations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Tempus v. 1.0

Tempus is a software framework for the time integration of ordinary differential equations (ODEs), partial differential equations (PDEs), and differential-algebraic equations (DAEs). Examples of time-integration methods available are Forward Euler, Backward Euler, Explicit Runge-Kutta and Implicit Runge-Kutta methods. Tempus can be used from small systems of equations (e.g., single ODEs for the time evolution of plasticity models) to large-scale transient simulations requiring exascale computing (e.g., flow fields around reentry vehicles and magneto-hydrodynamics). Tempus will be released as part of Trilinos under a BSD open source license.

Obert, CurtisC.↗
DOE OSTI2023

REYNO: A Reactive Hydrodynamics Modeling Suite

REYNO is a Python library that is primarily designed as a platform for the agile development and testing of novel reactive flow models. Equations of state and multi-step rate laws can be implemented using the provided class hierarchy with different thermodynamic closure conditions. The library includes a one-dimensional Lagrangian hydrodynamic solver to simulate multi-material reactive or inert problems in planar, cylindrical, or spherical coordinates. Custom time-dependent boundary conditions are also available for problems such as ramp compression. This document describes the different numerical methods and algorithms that are included in REYNO.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗