Search NASA⌕ Search

SEARCH · Search NASA

Results for “interfacial structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Evidence for interfacial geometric interactions at metal–support interfaces and their influence on the electroactivity and stability of Pt nanoparticles

Supported metals are widely used as industrial catalysts wherein the supports affect catalytic performances remarkably through either electronic and/or geometric interactions with the metals, and/or providing interfacial synergistic sites. Herein, we observed evidence for interfacial geometric interactions (IGIs) at Pt–C interfaces through a combination of atomic-scale structural analysis, in situ X-ray absorption fine structure, and electrochemical measurements for Pt/C model systems. The IGI has a long-range attribute and affects Pt surface atoms not only at interfacial perimeters but also adjacent to interfaces. The affected Pt surface atoms are proposed to contribute enhanced activity and stability for the oxygen reduction reaction through retarding the formation of strongly adsorbed oxygenated intermediates. Our work provides some necessary information for a better understanding of support effects and catalytically active surface sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemo–mechanical properties of carbon fiber reinforced geopolymer interphase

Geopolymers, as a potentially environmentally friendly alternative to Portland cement, are increasingly attracting attention in the construction industry. Various methods have been applied for customizing the properties of geopolymers and improving their commercial viability. One of the promising methods for refining the properties of geopolymers such as their toughness is the use of short fibers. The effectiveness of a high-strength short fiber in the geopolymer matrix is largely dependent on the interfacial bonding between the fiber and its surrounding matrix. While the importance of this interfacial chemistry is highlighted in the literature, the characteristics of this bonding structure have not been fully understood. In this paper, we aim to investigate the bonding mechanism between the carbon fiber and metakaolin-based geopolymer matrix. For the first time, the existence and nature of the chemical bonding at the interfacial region (interphase) between carbon fiber and geopolymer matrix has been revealed. X-ray pair distribution function computed tomography (PDF-CT), field emission-scanning electron microscopy imaging, and nanoindentation techniques are employed to discern the chemo-mechanical properties of the interphase. PDF-CT results show the emergence of a new atom-atom correlation at the interfacial region (around 1.82 angstrom). This correlation is a characteristic of interfacial bonding between the fiber and its surrounding matrix, where the existence of chemical linkages (potentially Al-V-O-C) between fibers and the matrix contributes to the adhesion between the two constituents making up the composite. Due to such chemical bonding, the nanomechanical properties of the interfacial region fall between that of the carbon fiber and geopolymer. The combination of advanced techniques is proved useful for enhancing our understanding of the interfacial chemistry between fibers and the binding matrix. This level of knowledge facilitates the engineering of composite systems through the manipulation of their nanostructure.

36 MATERIALS SCIENCE↗

Structure of the Regulator of G Protein Signaling 8 (RGS8)-Gα q Complex: Molecular Basis for Gα Selectivity

Regulator of G protein signaling (RGS) proteins interact with activated Gα subunits via their RGS domains and accelerate the hydrolysis of GTP. Although the R4 subfamily of RGS proteins generally accepts both Gα i/o and Gα q/11 subunits as substrates, the R7 and R12 subfamilies select against Gα q/11 . In contrast, only one RGS protein, RGS2, is known to be selective for Gαq/11. The molecular basis for this selectivity is not clear. Previously, the crystal structure of RGS2 in complex with Gα q revealed a non-canonical interaction that could be due to interfacial differences imposed by RGS2, the Gα subunit, or both. To resolve this ambiguity, the 2.6 Å crystal structure of RGS8, an R4 subfamily member, was determined in complex with Gα q . RGS8 adopts the same pose on Gα q as it does when bound to Gα i3 , indicating that the non-canonical interaction of RGS2 with Gα q is due to unique features of RGS2. Here, based on the RGS8-Gα q structure, residues in RGS8 that contact a unique α-helical domain loop of Gα q were converted to those typically found in R12 subfamily members, and the reverse substitutions were introduced into RGS10, an R12 subfamily member. Although these substitutions perturbed their ability to stimulate GTP hydrolysis, they did not reverse selectivity. Instead, selectivity for Gα q seems more likely determined by whether strong contacts can be maintained between α6 of the RGS domain and Switch III of Gα q , regions of high sequence and conformational diversity in both protein families.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bespoke Liquid/Liquid Interfaces (Final Technical Report)

The goal of DE-SC0001815 was to advance the basic science of liquid:liquid interface formation, to develop a deeper understanding of the mechanisms of phase separation and the essential relationships between solution composition, organization and dynamics that underlie the kinetic regime of solvent extraction. This included learning how interfacial organization and dynamics alters the properties of the primary coordination sphere of ions and the free energy of transport of ions complexes across a phase boundary. We relied primarily upon classical molecular dynamics studies to determine the equilibrium ensembles of these complex systems, but also utilized ab-initio MD and cluster-based density functional theory (DFT) calculations when more detailed investigation of the electronic structure was needed. We continued development of graph-theory based analyses to elucidate hierarchical correlations and expanded into geometric topology methods to quantify the collectively organized structures that can organize at a liquid/liquid interface during solute transport. One of the main conclusions was from the observation of two distinct mechanisms for solute transport - those that derive from amplifications of interfacial heterogeneity and surface roughness, and those wherein surface roughness has been dampened and instead collectively organized macrostructures work to bring solutes into the organic phase. It was our aim to create a concrete chemical model of the underlying driving forces behind interfacial primary and secondary structure formation and to map out the energetic features of solute transport so that tailored liquid/liquid can be developed that have characteristic kinetic features associated with mass transport.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Three-dimensional mesostructures as high-temperature growth templates, electronic cellular scaffolds, and self-propelled microrobots

Recent work demonstrates that processes of stress release in prestrained elastomeric substrates can guide the assembly of sophisticated 3D micro/nanostructures in advanced materials. Reported application examples include soft electronic components, tunable electromagnetic and optical devices, vibrational metrology platforms, and other unusual technologies, each enabled by uniquely engineered 3D architectures. A vast disadvantage of these systems is that the elastomeric substrates, while essential to the assembly process, can impose significant engineering constraints in terms of operating temperatures and levels of dimensional stability; they also prevent the realization of 3D structures in freestanding forms. In this work, we introduce concepts in interfacial photopolymerization, nonlinear mechanics, and physical transfer that bypass these limitations. The results enable 3D mesostructures in fully or partially freestanding forms, with additional capabilities in integration onto nearly any class of substrate, from planar, hard inorganic materials to textured, soft biological tissues, all via mechanisms quantitatively described by theoretical modeling. Illustrations of these ideas include their use in 3D structures as frameworks for templated growth of organized lamellae from AgCl–KCl eutectics and of atomic layers of WSe 2 from vapor-phase precursors, as open-architecture electronic scaffolds for formation of dorsal root ganglion (DRG) neural networks, and as catalyst supports for propulsive systems in 3D microswimmers with geometrically controlled dynamics. Taken together, these methodologies establish a set of enabling options in 3D micro/nanomanufacturing that lie outside of the scope of existing alternatives.

36 MATERIALS SCIENCE↗

Octahedral rotations in strained LaAlO{sub 3}/SrTiO{sub 3} (001) heterostructures

Many complex oxides display an array of structural instabilities often tied to altered electronic behavior. For oxide heterostructures, several different interfacial effects can dramatically change the nature of these instabilities. Here, we investigate LaAlO{sub 3}/SrTiO{sub 3} (001) heterostructures using synchrotron x-ray scattering. We find that when cooling from high temperature, LaAlO{sub 3} transforms from the Pm3{sup ¯}m to the Imma phase due to strain. Furthermore, the first 4 unit cells of the film adjacent to the substrate exhibit a gradient in rotation angle that can couple with polar displacements in films thinner than that necessary for 2D electron gas formation.

36 MATERIALS SCIENCE↗

Understanding and Strategies for Controlled Interfacial Phenomena in Lithium-Ion Batteries and Beyond

Electrolyte chemistry and properties and electrode structure and chemical properties particularly at the interfaces are crucial for the development of advanced battery components. This project focused on elucidating the roles of the electrolyte and electrode on the formation and evolution of the SEI layer and cell electrochemical performance on silicon and on Li metal anodes. For Si nano/microstructures we evaluated lithiation, volume changes, reactivity, and chemo-mechanical transformations as functions of nanoparticle size, shape, presence of coatings, electrolyte composition, electron leakage to the electrolyte, and cycling. For Li metal anodes we provided detailed analyses of the electrode and electrolyte effects on interfacial reactivity and as a function of microstructural evolution and underlying stochasticity as dendrites nucleate and grow. We thoroughly investigated and simulated how the chemistry of the various components of the electrolyte and the electrode architecture may affect the electrochemical reactions as well as cell degradation. A multiscale modeling approach was utilized, where atomistic simulations informed about the microscopic behavior of the system, and intermediate time and length scales were investigated with mesoscopic models. Results were also tested against selected experiments from our collaborators. The combined theoretical-experimental strategy saves costs by utilizing predictions from computational analyses to guide experimentation.

25 ENERGY STORAGE↗

Understanding the Static Interfacial Polymer Layer by Exploring the Dispersion States of Nanocomposites

The dynamic and static properties of the interfacial region between polymer and nanoparticles have wide-ranging consequences on performances of nanomaterials. The thickness and density of the static layer are particularly difficult to assess experimentally due to superimposing nanoparticle interactions. Here, we tune the dispersion of silica nanoparticles in nanocomposites by preadsorption of polymer layers in the precursor solutions, and by varying the molecular weight of the matrix chains. Nanocomposite structures ranging from ideal dispersion to repulsive order or various degrees of aggregation are generated and observed by small-angle scattering. Preadsorbed chains are found to promote ideal dispersion, before desorption in the late stages of nanocomposite formation. The microstructure of the interfacial polymer layer is characterized by detailed modeling of X-ray and neutron scattering. Only in ideally well-dispersed systems a static interfacial layer of reduced polymer density over a thickness of ca. 2 nm is evidenced based on the analysis with a form-free density profile optimized using numerical simulations. This interfacial gradient layer is found to be independent of the thickness of the initially adsorbed polymer, but appears to be generated by out-of-equilibrium packing and folding of the preadsorbed layer. The impact of annealing is investigated to study the approach of equilibrium, showing that initially ideally well-dispersed systems adopt a repulsive hard-sphere structure, while the static interfacial layer disappears. Furthermore, this study thus promotes the fundamental understanding of the interplay between effects which are decisive for macroscopic material properties: polymer-mediated interparticle interactions, and particle interfacial effects on the surrounding polymer.

36 MATERIALS SCIENCE↗

Growth, structural, and magnetic properties of single-crystal full-Heusler Co 2 TiGe thin films

This paper presents the growth, structural characterization, and measurement of magnetic properties of Co 2 TiGe thin films grown by molecular beam epitaxy on insulating MgO (001) substrates and conductive lattice matched InAlAs/InGaAs/InAlAs epitaxial layers grown on n-InP (001) substrates. A GdAs diffusion barrier was used to minimize interfacial reactions during Co 2 TiGe growth on InAlAs. The surface morphology, structural quality, and magnetic behavior were examined by reflection high-energy electron diffraction, scanning tunneling microscopy, X-ray diffraction, and superconducting quantum interference device magnetometry. The results reveal high quality Co 2 TiGe thin films with a saturation magnetization of ~1.8 μ B /formula unit and a Curie temperature of ~375 K. Finally, the magnetic easy axis was found to lie in the [110] direction but magnetometry also reveals that there is only a small difference in energy between the [110] and [010] magnetization directions.

36 MATERIALS SCIENCE↗

Single molecule insights into interfacial molecular recognition for model electrochemical DNA biosensors

Electrochemical sensors that use surface-immobilized DNA to bind analytes and transduce the binding into electrochemical signals, have the potential for rapid, specific, and sensitive detection of bioanalytes via a compact and portable platform. However, accessing the structure of these surfaces/interfaces at the relevant spatial scale (< 10 nm), which determines the interfacial interactions and ultimately sensing performance, remains an unsolved challenge. Here, we review studies that have used high resolution atomic force microscope imaging and spatial statistical analysis tools to understand crowding interactions between thiolated DNA probes immobilized on gold electrodes and how such interactions impact target binding. We also review related studies that attempt to control the nanoscale spatial arrangement of the immobilized recognition elements to optimize sensing performance. Furthermore, these efforts have led to new advances in understanding of the structure-function relationships of DNA-based electrochemical biosensors to move the field toward rational engineering of these biosensing interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

2D nanoconfinement distorts the solvation structure of hydroxide but not of hydronium

Understanding ion-specific behavior in nanoconfined water is essential for controlling charge transport and selectivity in two-dimensional membranes. Motivated by recent experiments revealing anomalous dielectric and transport behavior of water confined between hBN sheets, we use machine-learning-accelerated first-principles molecular dynamics to investigate the interfacial propensities of hydronium and hydroxide ions under similar confinement. We find that hydronium remains interfacial across all confinement regimes, whereas hydroxide shifts toward the interior as the environment becomes more bulk-like. This contrasting behavior reflects the combined influence of hydrogen bonding, interfacial water layering, and the polarization of hBN, which collectively stabilize hydronium at the surface while making hydroxide slightly more favorable within the structured interior. These findings expose an asymmetry in ion-surface coupling and establish a microscopic origin for hydronium’s enhanced interfacial affinity. The results provide mechanistic insight into ion partitioning in two-dimensional channels and highlight the collective structuring of confined water as a key determinant of interfacial ion thermodynamics.

organic↗

Interfacial behaviours between lithium ion conductors and electrode materials in various battery systems

In recent years room temperature Li+ ion conductors have been intensively revisited in order to develop safe lithium ion (Li-ion) batteries and beyond that can be deployed in the electrical vehicles. Through careful modification on materials synthesis, promising solid Li+ conductors with high ionic conductivity, competitve with liquid electrolytes, have been demonstrated. However, the integration of those highly conductive solid electrolytes into the whole system is still very challenging mainly due to the high impedance existing in the different interfaces throughout the entire battery structure. Herein , this review paper focuses on the overview of the interfacial behaviors between Li+ conductors and cathode/anode materials. The origin, evolution and potential solutions to reuce these interfacial impedances are reviewed for various battery systems spanning from Li-ion, lithium sulfur (Li-S), lithium oxygen (Li-O2) batteries to lithium metal protection. The predicted gravimetric and volumetric energy densities at different scenarios are also discussed along with the prospectives for further development of solid state batteries.

Wu, Bingbin↗

Composite Structured Surfaces for Durable Dropwise Condensation

Condensation heat transfer is a vital process for a plethora of industrial application. Dropwise condensation of steam on hydrophobic polymers, typified by the formation of discrete water droplets which shed and clear the surface for re-nucleation, has a 10X higher heat transfer coefficient when compared to filmwise condensation on bare metallic surfaces. However, 8 decades of research have conclusively demonstrated a lack of durability of the hydrophobic coatings during dropwise condensation to quantify industrial implementation. They key bottleneck is the coating conundrum, which states that thick hydrophobic coatings (> 10 µm) are required for higher durability, while thin hydrophobic coatings (< 1 µm) are required for low parasitic thermal resistance due to the low intrinsic thermal conductivity of polymeric materials (k ~ 0.1 W/m·K). Here, we attempt to solve the conundrum by developing rationally-designed metal-polymer composite coatings to increase the effective thermal conductivity of the hydrophobic coating, thereby enabling thicker coatings for higher durability. We study nanowire, inverse opal, and sintered sphere metallic structures infilled with hydrophobic polymers. To quantify the heat transfer performance, we analyze the vapor-to-coolant and vapor-to-surface heat transfer coefficients of composite coated flat surfaces having varying wire/sphere diameters (D = 100 nm, 1 μm, 10 μm) and coating thickness (10 nm < t < 100 μm) using three-dimensional (3D), steady state, Comsol simulations. We show that analytical models such as Maxwell or effective medium theory fail to predict the composite thermal conductivity. By conducting simulation with two independent sets of boundary conditions; isothermal surfaces and convection, as well as by varying the interfacial metal fractions, we demonstrate the importance of 3D heat spreading near the coating-vapor and coating-substrate interface. To predict the wetting characteristics to ensure stable dropwise condensation, we coupled our 3D heat transfer simulations to a unified model for contact angle hysteresis on heterogeneous surfaces. Our wetting predictions identify the key tradeoff between low spreading resistance (high k, filmwise condensation) and low contact angle hysteresis (low k, dropwise condensation) on high and low surface metal fractions, respectively, and identify the optimum metallic structure, volume fraction, interfacial solid fraction, and thickness for enhanced durability. Our work provides a novel approach to utilize rational metallic nanostructuring to create composite hydrophobic coatings which promise enhanced durability.

Chang, Ho Chan↗

Preparing Li-garnet electrodes with engineered structures by phase inversion and high shear compaction processes

We report solid-state lithium batteries are promising for safety and energy density com-pared with traditional lithium-ion batteries. However, the large interfacial resistance between the electrode and electrolyte is a bottleneck to achieving high-performance solid-state batteries. Engineered electrode structures with a porous scaffold of the solid electrolyte material are promising to lower the interfacial resistance and provide a mechanical support for a thin solid electrolyte layer. In this work, two ceramic processing techniques are used to fabricate porous/dense bilayer architectures based on a Li 6.25 Al 0.25 La 3 Zr 2 O 12 (LLZO) Li-garnet material. Finger-like vertically aligned pores are created by the phase inversion (PI) process. A water bath presaturated with Li salt prevents Li loss during the PI solvent exchange step. Pore size and porosity can be optimized by adjusting the bath temperature. The high shear compaction process was used to prepare LLZO tapes with 40, 60, and 80 vol% poreformer. The porosity of the tapes after sintering is 39.5%, 58.4%, and 75.4%, respectively. Microtomography exhibits the porosity, pore shape, and pore distribution of the tapes. A typical cathode material LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC) is filled into the pores via vacuum infiltration, and a dense cathode layer is formed within the garnet scaffold.

25 ENERGY STORAGE↗

Phase-field simulations of fission gas bubbles in high burnup UO2 during steady-state and LOCA transient conditions

To improve the economics of commercial nuclear energy generation, U.S. utilities are currently seeking licensing approval to operate UO2 fuel to higher burnups. One significant safety issue that must be addressed to obtain approval is the potential for fine fragmentation/pulverization of the fuel during a loss-of-coolant accident (LOCA). It has been hypothesized this is caused by the rapid increase of pressure in fission gas bubbles in the high burnup region of the fuel. To better understand this phenomenon, a novel phase-field model of the fission gas bubble microstructure in UO2 has been developed and implemented in Idaho National Laboratory's Marmot application for phase-field simulation of nuclear materials. Simulations of bubble growth in the high burnup region during steady-state conditions showed that initially overpressurized bubbles decreased in pressure during growth, but still remained above equilibrium pressure. During a LOCA transient, simulations of bubbles in the high burnup region showed that bubble size did not change significantly, and the pressure increase due to the transient was calculated and passed to a phase-field model of fracture.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Anisotropic Hot Spot Formation at a Grain Boundary in Shock-Compressed TATB High Explosive Crystal

Secondary high explosives (HEs) exhibit rich microstructure that promotes the formation of hot spots responsible for detonation initiation, but the role of microstructural interfaces remains poorly quantified. To this end, we develop extensions for the generalized crystal-cutting method (GCCM) to prepare molecular dynamics (MD) simulation cells containing grain boundaries (GBs) and other crystal–crystal interfaces with prescribed tilt and twist orientations. Using the GCCM, we perform MD simulations of shock interactions with a GB between the (001) and (100) crystal facets in the secondary HE TATB (1,3,5-triamino-2,4,6-trinitrobenzene). Our MD simulations reveal a strong directional dependence to the formation of a hot spot at the GB interface. In particular, transmission of the shock from the (001) grain to the (100) grain yields a hot spot in the (100) grain at the GB interface, whereas no hot spot is produced when an equivalent shock transits the GB in the opposite direction. We trace the origin of this GB anisotropy to three dominant factors: (1) the intrinsic differences in shock-deformation mechanisms and wave structures for the bulk (100) and (001) grains, which leads to distinct geometries and mechanical impedances upon shock arrival to the GB depending on which grains are donor or acceptor for the transmitted shock; (2) the different time intervals separating the initial shock rise and the formation of steady wave structures in the respective donor–acceptor configurations; and (3) the differences in time scales required to re-establish local thermal equilibrium. Interfacial hot spots form when these factors combine to impede development of a steady two-wave structure and instead induce a localized, pseudosingly shocked region that undergoes a higher rate of work production (resulting in a higher temperature) compared to when the steady two-wave structure develops further from the interface. The extensions to the GCCM approach presented here are anticipated to facilitate a wide range of MD studies that focus on understanding the role of crystal–crystal interfaces in molecular materials.

organic↗

In situ study on the effect of thermomigration on intermetallic compounds growth in liquid-solid interfacial reaction

Synchrotron radiation real-time imaging technology was carried out in situ to observe and characterize the effect of thermomigration on the growth behavior of interfacial intermetallic compounds (IMCs) in Cu/Sn/Cu solder joint during soldering. The thermomigration resulted in asymmetrical formation and growth of the interfacial IMCs. Cu{sub 6}Sn{sub 5} and Cu{sub 3}Sn IMCs formed at the cold end and grew rapidly during the whole soldering process. However, only Cu{sub 6}Sn{sub 5} IMC formed at the hot end and remained relatively thin until solidification. The IMCs at the cold end were nearly seven times thicker than that at the hot end after solidification. The Cu dissolution at the cold end was significantly restrained, while that at the hot end was promoted, which supplied Cu atoms to diffuse toward the cold end under thermomigration to feed the rapid IMC growth. Moreover, the thermomigration also caused asymmetrical morphology of the interfacial IMCs at the cooling stage, i.e., the Cu{sub 6}Sn{sub 5} IMC at the cold end transformed into facet structure, while that at the hot end remained scallop-type. The asymmetrical growth behavior of the interfacial IMCs was analyzed from the view point of kinetics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗