Search NASA⌕ Search

SEARCH · Search NASA

Results for “interrupt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

A geometry package for generation of input data for a three-dimensional potential-flow program

The preparation of geometric data for input to three-dimensional potential flow programs was automated and simplified by a geometry package incorporated into the NASA Langley version of the 3-D lifting potential flow program. Input to the computer program for the geometry package consists of a very sparse set of coordinate data, often with an order of magnitude of fewer points than required for the actual potential flow calculations. Isolated components, such as wings, fuselages, etc. are paneled automatically, using one of several possible element distribution algorithms. Curves of intersection between components are calculated, using a hybrid curve-fit/surface-fit approach. Intersecting components are repaneled so that adjacent elements on either side of the intersection curves line up in a satisfactory manner for the potential-flow calculations. Many cases may be run completely (from input, through the geometry package, and through the flow calculations) without interruption. Use of the package significantly reduces the time and expense involved in making three-dimensional potential flow calculations.

Halsey, N. D.↗

An anemometer for measuring velocities on the .25 to 4.25 M/sec range

A vane type anemometer was developed as a secondary standard for the on site calibration of wind velocity sensors. The instrument outputs an electrical pulse for each interruption of a light source by an eight vane fan. The pulse rate is proportional to the fan's angular speed and linearly related to wind velocity over the range 0.25 to 4.27 m/sec.

Carpini, T. D.↗

A fail safe laser activated switch used as an emergency control link at the Langley Vortex Research Facility

A fail safe light activated switch was used as an emergency control link at the Langley Vortex Research Facility. In this facility aircraft models were towed through a still air test chamber by a gasoline powered vehicle which was launched from one end of a 427-meter track and attained velocities to 31 m/sec in the test chamber. A 5 mW HeNe laser with a mechanical copper provided a connecting link with the moving tow vehicle on which a silicon photodiode receiver with a specially designed amplifier provided a fail safe switching action. This system provided an emergency means of stopping the vehicle by turning off the laser to interrupt the power to the vehicle ignition and brake release systems.

Kassel, P. C., Jr.↗

Helicopter internal noise control: Three case histories

Case histories are described in which measurable improvements in the cabin noise environments of the Bell 214B, 206B, and 222 were realized. These case histories trace the noise control efforts followed in each vehicle. Among the design approaches considered, the addition of a fluid pulsation damper in a hydraulic system and the installation of elastomeric engine mounts are highlighted. It is concluded that substantial weight savings result when the major interior noise sources are controlled by design, both in altering the noise producing mechanism and interrupting the sound transmission paths.

Edwards, B. D.↗

Effects of uncertainty on manual tracking performance

Transient phenomena and target acquisition modes associated with interrupted observations during ground-to-air AA tracking were investigated. Using a two-axes control stick, the subjects tracked a computer-generated airplane image on a CRT display. The airplane image excuted a low-level straight pass. At certain pseudo-random times during each 25-second run, the screen was blanked for a period of one second. When the target image reappeared, the subjects reacquired it and continued tracking, attempting to minimize vector RMS error for the entire run (including the blanked period). The results reveal an increase both in tracking error and in error variance during the blanked period, only when the target disappears while in the crossover region. Blanking at other times effected increased variance but had no effect on the mean error. A blanking period just before crossover produced an increase lag while a blanking just after crossover resulted in a lead and thus made the error curve more symmetric.

Ephrath, A. R.↗

Seismic vibration source

A system for vibrating the earth in a location where seismic mapping is to take place is described. A relatively shallow hole formed in the earth, such as a hole 10 feet deep, placing a solid propellant in the hole, sealing a portion of the hole above the solid propellant with a device that can rapidly open and close to allow a repeatedly interrupted escape of gas. The propellant is ignited so that high pressure gas is created which escapes in pulses to vibrate the earth.

Dowler, W. L.↗

Review of coaxial flow gas core nuclear rocket fluid mechanics

Almost all of the fluid mechanics research associated with the coaxial flow gas core reactor ended abruptly with the interruption of NASA's space nuclear program because of policy and budgetary considerations in 1973. An overview of program accomplishments is presented through a review of the experiments conducted and the analyses performed. Areas are indicated where additional research is required for a fuller understanding of cavity flow and of the factors which influence cold and hot flow containment. A bibliography is included with graphic material.

Weinstein, H.↗

Effects of space environment on composites: An analytical study of critical experimental parameters

A generalized methodology currently employed at JPL, was used to develop an analytical model for effects of high-energy electrons and interactions between electron and ultraviolet effects. Chemical kinetic concepts were applied in defining quantifiable parameters; the need for determining short-lived transient species and their concentration was demonstrated. The results demonstrates a systematic and cost-effective means of addressing the issues and show qualitative and quantitative, applicable relationships between space radiation and simulation parameters. An equally important result is identification of critical initial experiments necessary to further clarify the relationships. Topics discussed include facility and test design; rastered vs. diffuse continuous e-beam; valid acceleration level; simultaneous vs. sequential exposure to different types of radiation; and interruption of test continuity.

Gupta, A.↗

Forecast of Future Aviation Fuels. Part 1: Scenarios

A preliminary set of scenarios is described for depicting the air transport industry as it grows and changes, up to the year 2025. This provides the background for predicting the needs for future aviation fuels to meet the requirements of the industry as new basic sources, such as oil shale and coal, which are utilized to supplement petroleum. Five scenarios are written to encompass a range of futures from a serious resource-constrained economy to a continuous and optimistic economic growth. A unique feature is the choice of one immediate range scenario which is based on a serious interruption of economic growth occasioned by an energy shortfall. This is presumed to occur due to lags in starting a synfuels program.

English, J. M.↗

A catalog of jovian decameter-wave radio observations from 1957 - 1978

Data from over 200,000 hours of observation of Jupiter radio emission in the decameter-wavelength band, were collected from 13 observing sites and are available on magnetic tape. Observations were made at 14 fixed frequencies from 5 to 30 MHz. The characteristics of the tape recording technique and the data format are described. The combination of overlapping data from observing sites scattered world-wide lessens the effect of the earth's daily interruption of the ground-received signal. A power spectral analysis of the data shows no evidence of periodicities within the data other than the well-known influences of Jupiter, Io, and the earth. The dependence of the occurrence probability of emission on System 3 longitude and the phase of Io varies smoothly with frequency down to 15 MHz and then appears quite different at 10 MHz. The morphology of the radio sources is both complex and stable for periods of at least months and probably much longer.

Thieman, J. R.↗

Nitric oxide mixing ratios near the stratopause measured by a rocket-borne chemiluminescent detector

The nitric oxide mixing ratio between 43 km and 61 km was directly measured with a rocket-borne chemiluminescent detector. The ozone-generated background signal was monitored throughout the flight (in 1976) by periodically interrupting the atmospheric sample flow with a pure-N2 bias-supply gas. An error analysis of the 1976 results showed the need to correct results obtained from an earlier flight (in 1975). The corrected 1975 results are reported and compared with the 1976 results.

Horvath, J. J.↗

Contribution of tidal dissipation to lunar thermal history

Possible contributions of tidal heating to the thermal history of the moon are investigated, and conditions under which such heating would have been an important factor in the evolution of the moon are defined as precisely as possible within the bounds of the uncertainties. The tidal dissipation is defined as a function of position in the moon and of the earth-moon separation for a homogeneous incompressible moon. Results for the dissipation are given for eccentricities of zero and 0.055 as well as for the lunar obliquity as determined by the equilibrium Cassini states. Possible orbital resonances which interrupt the assumed simplified expansion of the lunar orbit are considered, along with radial variations in rigidity. The dissipation in a two-layer model moon with a molten inner core and an outer mantle with the moon's present rigidity is determined, and implications of the results for the role of tidal heating in the history of the moon are discussed.

Peale, S. J.↗

Single frequency RF powered ECG telemetry system

It has been demonstrated that a radio frequency magnetic field can be used to power implanted electronic circuitry for short range telemetry to replace batteries. A substantial reduction in implanted volume can be achieved by using only one RF tank circuit for receiving the RF power and transmitting the telemetered information. A single channel telemetry system of this type, using time sharing techniques, was developed and employed to transmit the ECG signal from Rhesus monkeys in primate chairs. The signal from the implant is received during the period when the RF powering radiation is interrupted. The ECG signal is carried by 20-microsec pulse position modulated pulses, referred to the trailing edge of the RF powering pulse. Satisfactory results have been obtained with this single frequency system. The concept and the design presented may be useful for short-range long-term implant telemetry systems.

Ko, W. H.↗

Weight control and restraint of laboratory rats

The use of restrained and confined rats in some procedures used in combustion toxicology introduces the problems of obtaining rats of the appropriate size for the apparatus, and of identifying any artifacts resulting from the use of restraint alone. Feeding studies indicate that controlled feeding of fast-growing strains such as the Sprague-Dawley can hold rat size essentially constant for significant periods of time. The undesirable aspects are the need to cage the animals individually, with resultant psychological as well as metabolic effects. Restraint studies of slow-growing strains such as the Fischer 344 indicate that denying access to food and water for periods of several hours at a time interrupts normal gain only temporarily.

Hilado, C. J.↗

Simulations of the monthly mean atmosphere for February 1976 with the GISS model

Three monthly mean simulations of the global atmosphere were computed for February 1976 with the GISS model from observed initial conditions on the first day of the month. In a replication experiment, two of these computations generated slightly different monthly mean states, apparently due to the schedule of interruptions on the computer. The root-mean-square errors of replication over the Northern Hemisphere were found to be about 2 mb, 20 m and 1 K for sea level pressure, 500 mb height and 850 mb temperature, respectively. The monthly mean 500 mb forecast results for February 1976 over the Northern Hemisphere are consistent with those from earlier GISS model experiments and again indicate some predictive skill at that level. Use of the observed monthly mean sea surface temperature (SST) field for February 1976 in place of the climatological SST field for February resulted in slightly improved simulations over the globe and Northern Hemisphere,

Spar, J.↗

Mineralogy, textures and mode of formation of a hibonite-bearing Allende inclusion

The origin of a Type A, hibonite-rich, coarse-grained inclusion is investigated with the electron microprobe and petrographic and scanning electron microscopes. The primary phases are hibonite, rhonite, Ti-Al-pyroxene, spinel, perovskite and melilite. Evidence for the crystallization of the bulk of the primary phases, hibonite and melilite, from a melt is lacking, suggesting that they may have condensed directly from a solar nebular gas instead. Primary phases were intensely altered during a later condensation event which deposited grossular, anorthite, nepheline and wollastonite in veins and cavities. Four or five condensate rims were deposited as successive layers on the outside of the inclusion. From inside to outside, they consist of perovskite + spinel, nepheline + anorthite, Ti-Al-pyroxene + diopside, hedenbergite + or - wollastonite + or - andradite and, finally, prisms of diopside and hedenbergite with wollastonite and andradite. Reverse zoning in melilite; alteration phases and rim phases, which are not stable condensates from a gas of solar composition; and details of the sequence of rim condensates all suggest that the entire condensation history of this inclusion was interrupted by changes in pressure and/or temperature and/or gas phase composition.

Allen, J. M.↗

Performance and economy of a fault-tolerant multiprocessor

The FTMP (Fault-Tolerant Multiprocessor) is one of two central aircraft fault-tolerant architectures now in the prototype phase under NASA sponsorship. The intended application of the computer includes such critical real-time tasks as 'fly-by-wire' active control and completely automatic Category III landings of commercial aircraft. The FTMP architecture is briefly described and it is shown that it is a viable solution to the multi-faceted problems of safety, speed, and cost. Three job dispatch strategies are described, and their results with respect to job-starting delay are presented. The first strategy is a simple First-Come-First-Serve (FCFS) job dispatch executive. The other two schedulers are an adaptive FCFS and an interrupt driven scheduler. Three failure modes are discussed, and the FTMP survival probability in the face of random hard failures is evaluated. It is noted that the hourly cost of operating two FTMPs in a transport aircraft can be as little as one-to-two percent of the total flight-hour cost of the aircraft.

Lala, J. H.↗

High-acceleration mass drivers

High-acceleration mass drivers are discussed including the MD2 model of axial geometry, with individually powered drive coils of 13.1 cm diameter. Timing is derived through the interruption of light beams by the moving armature (bucket). Electric power is provided by the resonant discharge of sector capacitor banks through silicon-controlled rectifiers in a two-phase, quadrature circuit. The bucket flies in vacuum, guided by passive dynamic eddy-current magnetic forces, those currents flowing in strip conductors lining the inside of a nonconducting vacuum pipe. Quantitative measurements are obtained with a solid bucket carrying two superconducting coils with a current density of 25 kA/sq cm. A cryogenic station for cooling the bucket to liquid helium temperature is connected to the vacuum pipe.

Oneill, G. K.↗