Search NASA⌕ Search

SEARCH · Search NASA

Results for “laser simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Multi-atmosphere picosecond CO 2 amplifier optically pumped at 4.3 μm

The possibility of the amplification of picosecond 10 μmpulses to GW powers in an optically pumped 20 atmosphere CO 2 laser is shown using numerical simulations. Here, multi-mJ 4.3 μm pulses generated by a tunable Fe:ZnSe laser are considered for pumping.

43 PARTICLE ACCELERATORS↗

Proposed hole-target for improving maximum proton energy driven by a short intense laser pulse

By using particle-in-cell simulations, a new method for energetic collimated proton generation via intense short pulse laser-thin foil interactions is presented. To enhance the electron heating efficiency, a small hole is bored at the center of a thin foil target. The small hole combines target heating mechanisms effectively, which results in a high proton maximum energy. While an ultraintense, ultrashort laser pulse propagates through a small hole (diameter<laser spot size), the laser pulse drives electrons pulled out from the hole inner wall effectively inside the hole. When these electrons leave the target, a strong sheath field is formed between the electrons and the target rear surface and this accelerates protons from the rear surface of the target. The effective combination of the laser longitudinal ponderomotive force with the transverse heating (by E field) mechanism results in highly efficient electron heating of the hole target. When the rear part of the hole is filled with a proton-electron contamination layer, energetic collimated protons are produced. The scaling of the maximum proton energy of a hole target over a wide range of laser pulse intensities is presented and compared with that of a simple planar target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Regions for Brillouin seed pulse growth in relativistic laser-plasma interaction

Parametric plasma processes received renewed interest in the context of generating ultraintense and ultrashort laser pulses up to the exawatt-zetawatt regime. For Brillouin scattering and seed pulse amplification at high intensities, the strong coupling regime is of special interest. The intensity-driven low-frequency modes depend on the amplitudes of the laser fields. It is investigated here how these modes develop in the relativistic regime. Then, a unified treatment of Raman and Brillouin processes becomes necessary. Assuming circular polarization, it is shown that with increasing intensity an overlap of the originally different Raman, Brillouin, and modulational instability branches occurs. Numerical simulations with a linearized Maxwell-fluid code confirm the analytically predicted behavior.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of ultra-high-pressure shocks by collision of a fast plasma projectile driven in the laser-induced cavity pressure acceleration scheme with a solid target

A novel, efficient method of generating ultra-high-pressure shocks is proposed and investigated. In this method, the shock is generated by collision of a fast plasma projectile (a macro-particle) driven by laser-induced cavity pressure acceleration (LICPA) with a solid target placed at the LICPA accelerator channel exit. Using the measurements performed at the kilojoule PALS laser facility and two-dimensional hydrodynamic simulations, it is shown that the shock pressure ∼ Gbar can be produced with this method at the laser driver energy of only a few hundred joules, by an order of magnitude lower than the energy needed for production of such pressure with other laser-based methods known so far.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Binaural Simulation Experiments in the NASA Langley Structural Acoustics Loads and Transmission Facility

A location and positioning system was developed and implemented in the anechoic chamber of the Structural Acoustics Loads and Transmission (SALT) facility to accurately determine the coordinates of points in three-dimensional space. Transfer functions were measured between a shaker source at two different panel locations and the vibrational response distributed over the panel surface using a scanning laser vibrometer. The binaural simulation test matrix included test runs for several locations of the measuring microphones, various attitudes of the mannequin, two locations of the shaker excitation and three different shaker inputs including pulse, broadband random, and pseudo-random. Transfer functions, auto spectra, and coherence functions were acquired for the pseudo-random excitation. Time histories were acquired for the pulse and broadband random input to the shaker. The tests were repeated with a reflective surface installed. Binary data files were converted to universal format and archived on compact disk.

Grosveld, Ferdinand W.↗

Modification of Photovoltaic Laser-Power (λ = 808 nm) Converters Grown by LPE

Laser-power converters for the wavelength λ = 808 nm are fabricated by liquid-phase epitaxy (LPE) on the basis of n-Al{sub 0.07}GaAs–p-Al{sub 0.07}GaAs–p-Al{sub 0.25}GaAs single-junction heterostructures. The converters are tested with uniform (pulse simulator) and partly nonuniform (laser beam) illumination distribution over the photoreceiving surface. In the former case, a monochromatic efficiency of η = 53.1% is achieved for samples with an area of S = 4 cm{sup 2} at a power of 1.2 W. At S = 10.2 mm{sup 2} the efficiency is 58.3% at a laser power of 0.7 W.

14 SOLAR ENERGY↗

The Influence of the Hall Term on the Development of Magnetized Laser-Produced Plasma Jets

We present 2D axisymmetric simulation results describing the influence of the Hall term on laser-produced plasma jets and their interaction with an applied magnetic field parallel to the laser axis. Bending of the poloidal B-field lines produces an MHD shock structure surrounding a conical cavity, and a jet is produced from the convergence of the shock envelope. Both the jet and the conical cavity underneath it are bound by fast MHD shocks. We compare the MHD results generated using the extended-MHD code Physics as an Extended-MHD Relaxation System with an Efficient Upwind Scheme (PERSEUS) with MHD results generated using GORGON and find reasonable agreement. We then present extended-MHD results generated using PERSEUS, which show that the Hall term has several effects on the plasma jet evolution. A hot low-density current-carrying layer of plasma develops just outside the plume, which results in a helical rather than a purely poloidal B-field, and reduces magnetic stresses, resulting in delayed flow convergence and jet formation. The flow is partially frozen into the helical field, resulting in azimuthal rotation of the jet. The Hall term also produces field-aligned current in strongly magnetized regions. In particular, we find the influence of Hall physics on this problem to be scale-dependent. In conclusion, this points to the importance of mitigating the Hall effect in a laboratory setup, by increasing the jet density and system dimensions, in order to avoid inaccurate extrapolation to astrophysical scales.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hot-electron production and suprathermal heat flux scaling with laser intensity from the two-plasmon-decay instability

The fully kinetic reduced-description particle-in-cell (RPIC) method has been applied to simulations of two-plasmon-decay (TPD) instability, driven by crossed laser beams, in an inhomogeneous plasma for parameters consistent with recent direct-drive experiments related to laser-driven inertial fusion. The nonlinear saturated state is characterized by very spiky electric fields, with Langmuir cavitation occurring preferentially inside density channels produced by the ponderomotive beating of the crossed laser beams and the primary TPD Langmuir waves (LWs). The heated electron distribution function is, in all cases, bi-Maxwellian, with instantaneous hot-electron temperatures in the range 60-100 keV. The net hot-electron energy flux out of the system is a small fraction ({approx}1% to 2%) of the input laser intensity in these simulations. Scalings of the hot-electron temperature and suprathermal heat flux as functions of the laser intensity are obtained numerically from RPIC simulations. These simulations lead to the preliminary conclusion that Langmuir cavitation and collapse provide dissipation by producing suprathermal electrons, which stabilize the system in saturation and drive the LW spectrum to the small dissipation scales at the Landau cutoff. The Langmuir turbulence originates at an electron density 0.241 Multiplication-Sign the laser's critical density, where the crossed laser beams excite a 'triad' mode-a common forward LW plus a pair of backward LWs. Remnants of this 'triad' evolve in k-space and dominate the time-averaged energy spectrum. At times exceeding 10 ps, the excited Langmuir turbulence spreads toward lower densities. Comparisons of RPIC simulations with the extended Zakharov model are presented in appropriate regimes, and the necessary requirements for the validity of a quasi-linear Zakharov model (where the spatially averaged electron-velocity distribution is evolved) are verified by RPIC simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pathways towards break even for low convergence ratio direct-drive inertial confinement fusion

Following indirect-drive experiments which demonstrated promising performance for low convergence ratios (below 17), previous direct-drive simulations identified a fusion-relevant regime which is expected to be robust to hydrodynamic instability growth. This paper expands these results with simulated implosions at lower energies of 100 and 270 kJ, and ‘hydrodynamic equivalent’ capsules which demonstrate comparable convergence ratio, implosion velocity and in-flight aspect ratio without the need for cryogenic cooling, which would allow the assumptions of one-dimensional-like performance to be tested on current facilities. A range of techniques to improve performance within this regime are then investigated, including the use of two-colour and deep ultraviolet laser pulses. Finally, further simulations demonstrate that the deposition of electron energy into the hotspot of a low convergence ratio implosion through auxiliary heating also leads to significant increases in yield. Results include break even for 1.1 MJ of total energy input (including an estimated 370 kJ of short-pulse laser energy to produce electron beams for the auxiliary heating), but are found to be highly dependent upon the efficiency with which electron beams can be created and transported to the hotspot to drive the heating mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uniformity of spherical shock wave dynamically stabilized by two successive laser profiles in direct-drive inertial confinement fusion implosions

The implosion uniformity of a directly driven spherical inertial confinement fusion capsule is considered within the context of the Laser Mégajoule configuration. Two-dimensional (2D) hydrodynamic simulations have been performed assuming irradiation with two laser beam cones located at 49° and 131° with respect to the axis of symmetry. The laser energy deposition causes an inward shock wave whose surface is tracked in time, providing the time evolution of its non-uniformity. The illumination model has been used to optimize the laser intensity profiles used as input in the 2D hydro-calculations. It is found that a single stationary laser profile does not maintain a uniform shock front over time. To overcome this drawback, it is proposed to use two laser profiles acting successively in time, in order to dynamically stabilize the non-uniformity of the shock front.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of a two-frequency cw chemical HF-HBr laser

An autonomous cw chemical HF-HBr laser emitting simultaneously at {approx}2.7 {mu}m (HF molecules) and {approx}4.2 {mu}m (HBr molecules) is studied numerically by using complete Navier-Stokes equations. It is shown that the output power of the HBr laser per unit area of the nozzle array can achieve {approx}20 W cm{sup -2} for the laser region length {approx}20 cm. The relation between the radiation intensities emitted by HF and HBr molecules is controlled by diluting the secondary fuel by bromine. (lasers)

74 ATOMIC AND MOLECULAR PHYSICS↗

Estimation of Timing Performance with Pulsed Laser Links for Small Satellite PNT

Satellite constellations are growing in size and in utility for applications as diverse as providing reliable, low-latency internet service to rural areas orEarth science missions.This expansion of satellite constellations brings attention to the need for responsive and reliable satellite communication.Current research in the PrecisionSpace Systems Laboratory at the University of Florida focuses on using pulsed laser communications as the method of relaying time signals instead of the radio frequency (RF)signals.The upcoming CLICK (CubeSat Laser Infrared CrosslinK) missions (Massachusetts Institute of Technology, University of Florida, NASA Ames Research Center) will demonstrate a spacecraft-to-spacecraft laser communication link and time-transfer.For pre-flight technology assessment of missions such as CLICK, a simulation of a spacecraft constellation in Earth orbit has been created to estimate clock synchronization and precision orbit determination based on measured instrumentation performance.We have developed a novel MATLAB-based numerical simulator to model spacecraft-to-spacecraft laser time-transfer and estimate the offset between the spacecraft clocks over time.This simulation includes timing errors associated with laser pulse generation and detection, as well as non-Gaussian clock drift models.The two on-board clocks modeled are a cesium-based Chip-Scale Atomic Clock (CSAC) and a rubidium-based Miniature Atomic Clock (MAC), both produced by Microchip.An example case of two spacecraft in a circular, low-Earth orbit receiving GPS position, GPS timing, and laser pulse time-of-flight measurements is simulated.The positions and velocities of the two spacecraft at a reference epoch and the constant clock model coefficients are estimated.Polynomial models of different orders were used as clock models. The effect of clock model order on the root-mean-square (RMS) of the clock error is apparent in the case using GPS and lasing measurements, showing that the clock model improves with increasing clock model order. Results compare the estimated clock model of a mission operation that only uses GPS measurements and a mission operation that uses both GPS and laser pulse time-of-flight measurements between spacecraft referenced to their on-board CSACs or on-board MACs. Including lasing measurements reduces the RMS clock model error by approximately 80% of the RMS of the cases with only GPS measurements.This simulation tool can be used to optimize the lasing operations schedule based on mission timing performance objectives. During this presentation, I will discuss the details of the simulation and clock model estimation, as well as discuss the results.I will compare the results of incorporating lasing timing measurements to using only GPS measurements and the outcomes of using different orders of polynomials.

Timing Performance↗

Simulation of experimental investigations of X-ray spectral path lengths on Iskra-5 laser facility

We describe an improved Slater average-ion model employed in the numerical-theoretical analysis of experimental data, which were obtained in the investigation of X-ray spectral path lengths performed on the Iskra-5 laser facility at the All-Russian Scientific Research Institute of Experimental Physics (VNIIEF). The proposed model permits determining the spectral characteristics of the X-ray radiation with an accuracy of a few electronvolts. We outline the results of simulations of experiments with X-ray radiation-heated aluminium and germanium specimens of initial thickness of {approx}0.1 mm, in which absorption lines arising from 1s-2p transitions in Al and the absorption band arising from 2p-3d transitions in Ge were recorded.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vortex mode excitation in a multimode fiber by the Laguerre-Gaussian laser beams

The coupling of Laguerre-Gaussian (LG) vortex modes into the Bessel vortex modes in a multimode fiber was analyzed using the vector form of LG beams. A formula for estimating the transmission coefficients of the excited vortex modes was developed. Analytical calculation results show that the coupling coefficients are affected by the focus size. With proper beam waist radius most the power of incident vortex mode can couple into single vortex mode. The numerical simulation was also carried out, and the simulation results are in good agreement with those from the analytical model.

42 ENGINEERING↗

Autofocused, enhanced proton acceleration from a nanometer-scale bulged foil

We report an autofocused, enhanced proton acceleration by the interaction of an intense laser pulse with a bulged target. These results are obtained from two-dimensional particle-in-cell simulations using a real Gaussian laser pulse, normally incident on a bulged/planar, 60 nm thick foil (C:H=1:1). When the laser pulse hits the precurved target, energetic protons are converged on the axis automatically. For the bulged foil, due to oblique incidence at the wing region, the efficient vacuum heating at larger incidence angles will result in more energetic hot electrons than from the flat foil. The enhancement of hot electron temperature and density will result in a larger longitudinal field, which contributes to an enhancement of proton energy. The maximum proton energy of 124 MeV is attained from a bulged target irradiated by a linear polarized laser pulse at an intensity of 1.3x10{sup 20} W/cm{sup 2}, which is two times higher than from the planar target (61 MeV).

43 PARTICLE ACCELERATORS↗

Enhanced electron acceleration by high-intensity lasers in extended (confined) preplasma in cone targets

Here we report on experimental results from a high-intensity laser interaction with cone targets that increase the number (×3) and temperature (×3) of the measured hot electrons over a traditional planar target. This increase is caused by a substantial increase in the plasma density within the cone target geometry, which was induced by 17 ± 9 mJ prepulse that arrived 1.5 ns prior to the main high intensity (>10 19 W/cm 2 ). Three-dimensional hydrodynamic simulations are conducted using hydra which show that the cone targets create substantially longer and denser plasma than planar targets due to the geometric confinement of the expanding plasma. The density within the cone is a several hundred-micron plasma “shelf” with a density of approximately 10 20 n e /cc. The HYDRA simulated plasma densities are used as the initial conditions for two-dimensional particle-in-cell simulations using EPOCH. These simulations show that the main acceleration mechanism is direct-laser-acceleration, with close agreement between experimentally measured and simulated electron temperatures. Further analysis is conducted to investigate the acceleration of the electrons within the long plasma generated within a compound parabolic concentrator by the prepulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Absolute laser energy absorption measurement of relativistic 0.7 ps laser pulses in nanowire arrays

Laser absorption is one of the most important parameters governing laser–matter interactions. The laser energy absorption on nanowire array targets is measured for the first time in the relativistic regime at intensities of 10 19 W=cm 2 and compared to foil targets. The results show that the laser energy absorption of 0.7 ps frequency doubled (527 nm) pulses on Au nanowire targets varies widely with nanowire parameters, reaching laser energy absorption values up to 71% of the incident energy, significantly exceeding those of solid flat targets obtained in similar irradiation conditions. The analysis shows that the increase in absorption strongly correlates with larger effective target surface area over a broad range of nanowire parameters explored. These direct absorption measurements provide valuable data to benchmark simulations of the relativistic laser pulse interactions with nanostructures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗