Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Exchange bias mediated by interfacial nanoparticles (invited)

The objective of this study on the iconic exchange-bias bilayer Permalloy/CoO has been to identify those elements of the interfacial microstructure and accompanying magnetic properties that are responsible for the exchange-bias and hysteretic properties of this bilayer. Both epitaxial and polycrystalline samples were examined. X-ray and neutron reflectometry established that there existed an interfacial region, of width ∼1 nm, whose magnetic properties differed from those of Py or CoO. A model was developed for the interfacial microstructure that predicts all the relevant properties of this system; namely; the temperature and Permalloy thickness dependence of the exchange-bias, H{sub EX}, and coercivity, H{sub C}; the much smaller measured values of H{sub EX} from what was nominally expected; the different behavior of H{sub EX} and H{sub C} in epitaxial and polycrystalline bilayers. A surprising result is that the exchange-bias does not involve direct exchange-coupling between Permalloy and CoO, but rather is mediated by CoFe{sub 2}O{sub 4} nanoparticles in the interfacial region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combined crystal plasticity and grain boundary modeling of creep in ferritic-martensitic steels: II. The effect of stress and temperature on engineering and microstructural properties

This paper describes a series of physically-based crystal plasticity finite element method (CPFEM) simulations of long-term creep and creep rupture of Grade 91 steel. It is Part 2 of a two part series of papers. Part 1 describes the simulation framework; this part focuses on specific simulations and on how the predicted long-term creep properties of Grade 91 compare to the assumptions used in current high temperature design practices. This work extends the model developed in Part 1 to look at creep properties at different temperatures, principal stresses, and multiaxial stress states. The simulations show that empirically extrapolating creep rupture stresses from short-term experimental data may substantially over predict the actual long-term creep properties of Grade 91. Additionally, the CPFEM calculations predict a transition from notch strengthening creep behavior for high values of maximum principal stress and moderate notch severity to notch weakening behavior for low principal stresses and more severe notches. The latter regime better categorizes conditions in engineering components designed for long term elevated temperature use, which implies Grade 91 may be a notch weakening material in actual service. This would have a significant impact on high temperature design practices, though confirmatory test data on long-life, low stress notched specimens is difficult to obtain. Finally, one advantage of the physically-based modeling approach adopted here is that the simulation results also elucidate the microstructural mechanisms causing the macroscopic trends in engineering properties predicted by the simulations. This paper shows that the detailed micromechanical mechanisms predicted by the CPFEM simulations can be abstracted with a simple micromechanical model that can be used to both explain the detailed results and make improved predictions of engineering properties from experimental data.

36 MATERIALS SCIENCE↗

Accelerate microstructure evolution simulation using graph neural networks with adaptive spatiotemporal resolution

Abstract Surrogate models driven by sizeable datasets and scientific machine-learning methods have emerged as an attractive microstructure simulation tool with the potential to deliver predictive microstructure evolution dynamics with huge savings in computational costs. Taking 2D and 3D grain growth simulations as an example, we present a completely overhauled computational framework based on graph neural networks with not only excellent agreement to both the ground truth phase-field methods and theoretical predictions, but enhanced accuracy and efficiency compared to previous works based on convolutional neural networks. These improvements can be attributed to the graph representation, both improved predictive power and a more flexible data structure amenable to adaptive mesh refinement. As the simulated microstructures coarsen, our method can adaptively adopt remeshed grids and larger timesteps to achieve further speedup. The data-to-model pipeline with training procedures together with the source codes are provided.

36 MATERIALS SCIENCE↗

Microstructure in the extreme environment: understanding and predicting dynamic damage processes

The future of materials science: strategic application for functionally controlled materials properties is emphasized by the need to control material performance in extreme environments. To this end, this study examines the separate effects of kinetics (in the form of dynamic loading rate and shock wave shape) from that of length-scale effects (in the form of microstructural defect distributions). Recently available mesoscale modeling techniques are being used to capture a physical link between kinetic and length-scale influences on dynamic loading. This work contributes innovative new tools in the form of shock-wave shaping techniques in dynamic experimentation, materials characterization, lending insight into 3D damage field analysis at micron resolution, and the physics necessary to provide predictive capabilities for dynamic damage evolution. Experimental results tailored for the discreet understanding of length-scale and kinetic effects during dynamic loading are obtained to provide the basis for the development of process-aware material performance models. The understanding of length-scale and kinetic effects in extreme environments of dynamic loading advances the understanding of current emerging issues relevant to phenomena such as inclusion related failure in metals, grain size dependence on ejecta, and benefits of interfaces in mitigating defect development specifically driven by the need to tailor material response. Finally, the coupling of experimental techniques with theory and simulation is aimed at advancing process-aware damage modeling as well as transitioning materials science from observation to property control.

36 MATERIALS SCIENCE↗

Numerical analysis of the influence of scale effects and microstructure on hydrogen diffusion in polycrystalline aggregates

Predicting resistance to environmental degradation, especially hydrogen embrittlement (HE) has become a major concern for life assessment and risk analysis of structural materials. The microstructure of the materials plays a significant role in HE. Despite the large documentation about the subject, the contribution of hydrogen diffusion on this process stays unclear. In this work, we analyze the effects of the microstructure on hydrogen diffusion, especially the influence of grain boundaries considered as high diffusivity paths and possible sites of damage occurrence. Electrochemical permeation was simulated using finite elements method (FEM). Scale effects between the RVE (Representative Volume Element) and the size of the membrane are discussed. Domains of applicability for standard homogenization methods, especially Hashin Shtrikman model are studied using results from microstructural based FEM. Domains of invariance of diffusion behavior and concentration profiles for grain shapes and the size of the membrane are also analyzed. Thus, the difficulty to extract diffusion properties by permeation test for heterogeneous microstructures is highlighted and discussed.

hydrogen, permeation, diffusion, microstructure, g↗

An Implicit Approach to Phase Field Modeling of Solidification for Additively Manufactured Alloys [Slides]

We are leveraging modern algorithms and computational science to provide a route to predictive simulation of microstructure evolution on emerging exascale architectures. We are utilizing the fastest supercomputers in the world for modeling and simulation of microstructure evolution for generation of data under AM conditions. Solidification conditions in AM can be tailored for the reliable design of materials to specific performance requirements. Developing computational tools to further characterize alloys and correlate the processing-structure-properties-performance (PSPP) relationship.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of 21-6-9 Stainless Steel Electron Beam Welds

Welds can either be stronger or weaker than the base metals that they join depending on the microstructures that form in the fusion and heat-affected zones of the weld. In this paper, weld strengthening in the fusion zone of annealed 21-6-9 stainless steel is investigated using cross-weld tensile samples, hardness testing, and microstructural characterization. Due to the stronger nature of the weld, the cross-weld tensile tests failed in the base metal and were not able to generate true fusion zone mechanical properties. Nanoindentation with a spherical indenter was instead used to predict the tensile behavior for the weld metal. Extrapolation of the nanoindentation results to higher strains was performed using the Steinberg–Guinan and Johnson–Cook strength models, and the results can be used for weld strength modeling purposes. The results illustrate how microstructural refinement and residual ferrite formation in the weld fusion zone can be an effective strengthener for 21-6-9 stainless steel.

36 MATERIALS SCIENCE↗

Water Management In PEM Fuel Cell -“ A Lattice-Boltzmann Modeling Approach

In Proton Exchange Membrane Fuel Cells (PEMFCs), water management and the effective transport of water through the gas-diffusion-layer (GDL) are key issues for improved performance at high power density and for durability during freeze-thaw cycles. The diffusion layer is a thin (~150-350{micro}m), porous material typically composed of a web of carbon fibers and particles, and is usually coated with hydrophobic Teflon to remove the excess water through capillary action. In-situ diagnostics of water movement and gas-reactant transport through this thin opaque substrate is challenging. Numerical analyses are typically based on simplified assumptions, such as Darcy's Law and Leverett functions for the capillary pressure. The objective of this work is to develop a high fidelity CFD modeling and analysis tool to capture the details of multiphase transport through the porous GDL. The tool can be utilized to evaluate GDL material design concepts and optimize systems based on the interactions between cell design, materials, and operating conditions. The flow modeling is based on the Lattice Boltzmann Method (LBM). LBM is a powerful modeling tool to simulate multiphase flows. Its strength is in its kinetic theory based foundation, which provides a fundamental basis for incorporating intermolecular forces that lead to liquid-gas phase separation and capillary effects without resorting to expensive or ad-hoc interface reconstruction schemes. At the heart of the solution algorithm is a discrete form of the well-known Boltzmann Transport Equation (BTE) for molecular distribution, tailored to recover the continuum Navier-Stokes flow. The solution advances by a streaming and collision type algorithm, mimicking actual molecular physics, which makes it suitable for porous media involving complex boundaries. We developed a numerical scheme to reconstruct various porous GDL microstructures including Teflon loading. Single and multiphase LBM models are implemented to compute permeability. Predicted values are in good agreement with measured data. The present modeling approach resolves the GDL microstructures and captures the influence of fiber orientation on permeability and the influence of Teflon loading on the development of preferential flow paths through the GDL. These observations can potentially guide the development of novel GDL materials designed for efficient removal of water.

30 DIRECT ENERGY CONVERSION↗

Corrosion of Al-Fe self-pierce riveting joints with multiphysics-based modeling and experiments

Self-piercing riveting (SPR) is an extensively used joining technique to assemble dissimilar materials. However, this joining of the dissimilar materials can generate galvanic/crevice corrosion, which can drastically impact the mechanical properties and the service life of the joint. In this study, a multiphysics-based hybrid modeling approach is developed for the galvanic corrosion of the Al-Fe SPR joints, which can consider the corrosion initiation and corrosion evaluation jointly. Experimental studies are first performed to extract information regarding the corrosion initiation sites, corrosion evolution and overall corrosion induced material loss in SPR joints. The initiation information is then passed onto the multiphysics FE model thus making it a hybrid model. This model can help understand the influences of metal microstructure on the corrosion propagation while the morphology changes can also be analyzed. Using the developed hybrid modeling approach, thorough parametric studies can be performed to explore the coupled impacts of multiple corrosion factors on the corrosion behavior of the joints. The developed hybrid model is validated on the prediction of galvanic corrosion for the SPR joints by comparing with experimental observations.

36 MATERIALS SCIENCE↗

Effects of ternary alloy additions on the microstructure of highly immiscible Cu alloys subjected to severe plastic deformation: An evaluation of the effective temperature model

Phase evolution in dilute, strongly immiscible Cu-Mo, Cu-Mo-Ni, and Cu-Mo-Ag alloys during severe plastic deformation at low-temperature has been experimentally investigated. For the Cu95Mo05 alloy, Mo nanoparticles are formed, ~10 nm in diameter, as part of a steady state microstructure, with less than ~1 at.% Mo dissolved in the matrix. Addition of 10 or 20 at.% Ni to this binary alloy results in a significant increase in the Mo solubility, whereas comparable additions of Ag has a corresponding little effect. The steady state microstructures of alloys during ball milling of elemental powders are very similar to those during HPT processing of initially homogeneous solutions. The results are discussed in terms of an effective temperature model. Model MD simulations are presented to help relate the predictions of the effective temperature model to atomistic mechanisms.

36 MATERIALS SCIENCE↗

On the pressure effect in energetic deposition of Cu thin films by modulated pulsed power magnetron sputtering: A global plasma model and experiments

The modulated pulsed power magnetron sputtering (MPPMS) discharge processes are numerically modeled and experimentally investigated, in order to explore the effect of the pressure on MPPMS discharges as well as on the microstructure of the deposited thin films. A global plasma model has been developed based on a volume-averaged global description of the ionization region, considering the loss of electrons by cross-B diffusion. The temporal variations of internal plasma parameters at different pressures from 0.1 to 0.7 Pa are obtained by fitting the model to duplicate the experimental discharge data, and Cu thin films are deposited by MPPMS at the corresponding pressures. The surface morphology, grain size and orientation, and microstructure of the deposited thin films are investigated by scanning electron microscopy, transmission electron microscopy, and x-ray diffraction. By increasing the pressure from 0.1 to 0.7 Pa, both the ion bombardment energy and substrate temperature which are estimated by the modeled plasma parameters decrease, corresponding to the observed transition of the deposited thin films from a void free structure with a wide distribution of grain size (zone T) into an underdense structure with a fine fiber texture (zone 1) in the extended structure zone diagram (SZD). The microstructure and texture transition of Cu thin films are well-explained by the extended SZD, suggesting that the primary plasma processes are properly incorporated in the model. The results contribute to the understanding of the characteristics of MPPMS discharges, as well as its correlation with the microstructure and texture of deposited Cu thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fracture modes in tubular LSFCO ceramic membranes under graded reducing conditions

Highlights: ► Microstructural evolution in LSFCO membranes under graded environment is reported. ► The role of chemically induced stresses and oxygen deficiency is evaluated. ► The stress distribution is modeled by a point defect model. - Abstract: Chromium (III) oxide (Cr{sub 2}O{sub 3})-doped LaSrFeO{sub 3} perovskite, La{sub 0.2}Sr{sub 0.8}Fe{sub 0.8}Cr{sub 0.2}O{sub 3−δ} (LSFCO), is being considered as a potential material for applications in solid oxide fuel cells, gas separation membranes, and electrochemical reactors because of its high electro-catalytic activity. Similar to other perovskites, the performance and mechanical strength of LSFCO materials are significantly affected by environment and temperature. Here, we report a fracture gradient phenomenon in tubular C-ring-shaped LSFCO ceramic membranes under graded reducing conditions. The graded reducing condition was produced by flushing N{sub 2} on the outer side of the C-ring membranes at 1000 °C while keeping the inner side untreated. The rings were then diametrically compressed to fracture, and the resultant fracture morphology was analyzed with a scanning electron microscope (SEM). A fracture gradient with three distinct regions across the thickness of the membranes was identified on the split surfaces. In the outer region of the C-ring specimen exposed to N{sub 2}, a mixed inter/transgranular fracture with a predominant intergranular pattern was observed. In the middle section of the fracture surface, a characteristic transgranular fracture of the perovskite grains was found. At the inner region of the ring, a mixed inter/transgranular fracture with a predominant transgranular pattern occurred. The mechanism of gradient fractures was attributed both to chemically induced stresses caused by oxygen diffusion and to the formation of a separate phase of oxygen-deficient perovskite in the parent perovskite. The stresses generated were modeled by a point defect model. This work provides significant information on microstructure evolutions of tubular LSFCO membranes under graded reducing atmospheres.

36 MATERIALS SCIENCE↗

Combining synchrotron X-ray diffraction, mechanistic modeling and machine learning for in situ subsurface temperature quantification during laser melting

Laser melting, such as that encountered during additive manufacturing, produces extreme gradients of temperature in both space and time, which in turn influence microstructural development in the material. Qualification and model validation of the process itself and the resulting material necessitate the ability to characterize these temperature fields. However, well established means to directly probe the material temperature below the surface of an alloy while it is being processed are limited. To address this gap in characterization capabilities, a novel means is presented to extract subsurface temperature-distribution metrics, with uncertainty, from in situ synchrotron X-ray diffraction measurements to provide quantitative temperature evolution data during laser melting. Temperature-distribution metrics are determined using Gaussian process regression supervised machine-learning surrogate models trained with a combination of mechanistic modeling (heat transfer and fluid flow) and X-ray diffraction simulation. The trained surrogate model uncertainties are found to range from 5 to 15% depending on the metric and current temperature. The surrogate models are then applied to experimental data to extract temperature metrics from an Inconel 625 nickel superalloy wall specimen during laser melting. The maximum temperatures of the solid phase in the diffraction volume through melting and cooling are found to reach the solidus temperature as expected, with the mean and minimum temperatures found to be several hundred degrees less. The extracted temperature metrics near melting are determined to be more accurate because of the lower relative levels of mechanical elastic strains. However, uncertainties for temperature metrics during cooling are increased due to the effects of thermomechanical stress.

36 MATERIALS SCIENCE↗

Microstructure and Fission Product Distribution Examination in the UCO kernel of TRISO Fuel Particles

The effect of irradiation and fabrication process on the UCO fuel kernel, kernel-buffer interlayer and fission products, has not been fully studied for UCO fuel kernels of TRISO coated particles. Specifically, the potential correlation(s) with fission product retention, composition and distribution within these structures for the tristructural isotropic (TRISO) fuel performance at normal and accident conditions, are not well reported in literature. Structural and chemical information in the irradiated UCO fuel kernel, e.g., the stoichiometry variations, may further contribute to fuel performance modeling under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. The microstructural and micro-chemical evolution of selected irradiated UCO fuel kernels, kernel buffer interfaces and recoil zones were characterized using Scanning Transmission Electron Microscopy (STEM) and Energy Dispersive Spectroscopy (EDS) elemental mapping. The fuel kernel of particles from Advanced Gas Reactor (AGR)-2 irradiated to 10.8% fissions per initial metal atom (FIMA), were examined with the following main findings: (1) large fission gas bubbles were mainly identified in the zirconium and molybdenum enriched but oxygen depleted phases in the center of fuel kernel, (2) significant inter-diffusion between the UCO fuel kernel and pyro-carbon buffer layer was observed as a high density of sub-micron sized carbon inclusions was identified at near the interface in the kernel side and some isolated UCO particles were located in the buffer layer, (3) pores filled with free carbon were also observed in the recoil zone specimen. Fuel kernels from two AGR-1 compacts irradiated to 11.4 and 17.4% FIMA respectively, were examined with the following main findings: (1) two primary phases consisting of a “high-Z (atomic mass)” UC(O) phase (rocksalt; a=0.496 nm) that also contained Zr, Mo, and/or Ru and a “low-Z” UO2(C) phase (fluorite structure; a = 0.547nm) in which trace amounts of I, Nd, Pr, and/or Er could be detected. This latter phase contained many precipitates of the “high-Z” phase. Conversely, this latter phase did not contain precipitates of the UO2-type material, (2) Xe bubbles were found almost exclusively in the “high-Z” phase and in the particular example shown, the Zr-containing variant. Further work in this area should address whether this potential Xe preference for just one of the high-Z phases is indeed a real effect.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interplay of strain and phase evolution of laser powder bed fusion Ti–6Al–4V

While additive manufacturing (AM) provides a method of producing geometrically complex and highly detailed structures, the generation of residual strain in AM processes like laser powder bed fusion (L-PBF) can negatively impact performance-enabling properties. In applications such as orthopedic implants, specific performance windows require optimized microstructures in order to obtain desirable properties from multi-phase alloys like Ti–6Al–4V. This research aims to quantify the microscale origins of strain in L-PBF manufactured Ti–6Al–4V by understanding how strain is distributed at the grain and sub-grain scale, the interplay between phase evolution and strain, and examining post-processing strain relief strategies to control these features. Model spinal cage implants were manufactured from Ti–6Al–4V powder via L-PBF and then subjected to strain relieving heat treatment cycles above and below the Ti–6Al–4V β transus as a function of time and cooling rate. Residual strain was then studied via high resolution electron backscatter diffraction (HR-EBSD), and 2D strain maps with sub-micron resolution were generated for each post-processing state. It was found that macroscale thermal strains decreased with heat treatment time, but additional contributions from phase stabilizing residual strains retained primarily in the α' grains as lattice distortive strain remained. Additionally, the retention of β phase significantly changed the strain and dislocation distribution while reducing overall residual strain. In conclusion, these results were validated and reinforced with 3D mesoscopic micromechanical modeling of strain behavior across simulated microstructures, confirming that the local lattice dilation of α’ martensite is a primary contributor of microscale strain generation and retention in L-PBF Ti–6Al–4V.

36 MATERIALS SCIENCE↗

Crystallinity and microstructure in Si films grown by plasma-enhanced chemical vapor deposition: A simple atomic-scale model validated by experiments

A joint theoretical and experimental analysis of the crystalline fraction in nanocrystalline films grown by low-energy plasma enhanced chemical vapor deposition is presented. The effect of key growth parameters such as temperature, silane flux, and hydrogen dilution ratio is analyzed and modeled at the atomic scale, introducing an environment-dependent crystallization probability. A very good agreement between experiments and theory is found, despite the use of a single fitting parameter.

36 MATERIALS SCIENCE↗

A data-driven framework for permeability prediction of natural porous rocks via microstructural characterization and pore-scale simulation

Understanding the microstructure–property relationships of porous media is of great practical significance, based on which macroscopic physical properties can be directly derived from measurable microstructural informatics. However, establishing reliable microstructure–property mappings in an explicit manner is difficult, due to the intricacy, stochasticity, and heterogeneity of porous microstructures. In this paper, a data-driven computational framework is presented to investigate the inherent microstructure–permeability linkage for natural porous rocks, where multiple techniques are integrated together, including microscopy imaging, stochastic reconstruction, microstructural characterization, pore-scale simulation, feature selection, and data-driven modeling. A large number of 3D digital rocks with a wide porosity range are acquired from microscopy imaging and stochastic reconstruction techniques. A broad variety of morphological descriptors are used to quantitatively characterize pore microstructures from different perspectives, and they compose the raw feature pool for feature selection. Here high-fidelity lattice Boltzmann simulations are conducted to resolve fluid flow passing through porous media, from which reliable permeability references are obtained. The optimal feature set that best represents permeability is identified through a performance-oriented feature selection process, upon which a cost-effective surrogate model is rapidly fitted to approximate the microstructure-permeability mapping via data-driven modeling. This surrogate model exhibits great advantages over empirical/analytical formulas in terms of prediction accuracy and generalization capacity, which can predict reliable permeability values spanning four orders of magnitude. Besides, feature selection also greatly enhances the interpretability of the data-driven prediction model, from which new insights into the mechanism of how microstructural characteristics determine intrinsic permeability are obtained.

58 GEOSCIENCES↗