Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

An MPI-IO Interface to HPSS

This paper describes an implementation of the proposed MPI-IO standard for parallel I/O. Our system uses third-party transfer to move data over an external network between the processors where it is used and the I/O devices where it resides. Data travels directly from source to destination, without the need for shuffling it among processors or funneling it through a central node. Our distributed server model lets multiple compute nodes share the burden of coordinating data transfers. The system is built on the High Performance Storage System (HPSS), and a prototype version runs on a Meiko CS-2 parallel computer.

Parallel Processing↗

NASA Aeronautics Sustainable Aviation Overview

We live in challenging but exciting times for aviation as the sector continues to emerge from the unprecedented impact of a global pandemic while addressing its contribution to global warming. This perfect storm provides opportunity and the drivers that can lead to the most substantial changes the aviation sector has seen since the convergence of jet engines and swept wings over 60 years ago. The reality is we are entering the dawn of a new era of sustainable aviation full of opportunities and challenges that must economically address the health and transportation needs of society with unprecedentedly low impact on local, regional, and global environments. Today, commercial aviation physically connects countries across the globe and is an integral, critical part of today’s expanding global economy. Commercial aviation relies almost entirely on subsonic transport aircraft to constantly move people and goods from one place to another across the globe. While an effective means of transportation providing an unmatched combination of payload, speed, and range, future subsonic aircraft must continue to improve to meet efficiency, environmental, and economic goals established around the world to sustain the substantial growth projected in this well-established market. Commercial supersonic transports have come and gone in the global market, but they are on the verge of reemerging. Vertical lift vehicles leveraging breakthroughs in autonomous systems and electrified propulsion are positioned for massive growth in local and regional markets leading to daily flights within metropolitan areas that may exceed that across countries. To succeed, these new aircraft must be sustainable from day 1. NASA Aeronautics has a long history of contributions to aviation, and today it continues to address the challenge of sustainable growth of the traditional air transportation system through the research and development of systems and technologies for future aircraft and airspace operations. Research programs over the last decade have set the stage to demonstrate key technologies offering step-change performance and environmental impact. Through a Sustainable Flight National Partnership, NASA will partner with industry, academia, and other government agencies to demonstrate the most promising technologies during the 2020s to enable revolutionary systems in the early 2030s. In parallel, NASA will explore systems and technologies for further benefits approaching zero environmental impact beyond the 2030s. Similarly, NASA programs are addressing the challenges of emerging markets enabled by vertical take-off/landing and low-boom supersonic cruise. This oral-only presentation will focus on opportunities and challenges in the traditional subsonic transport while touching on emerging vertical lift and supersonic commercial aviation markets. NASA’s recent contributions, ongoing research, and plans for sustainable aviation will be discussed, including airframe, propulsion, and integrated vehicle systems and technologies.

James A. Kenyon↗

High Reliability at Minimum Cost

This paper investigates the minimum cost of improving the reliability of complex technical systems. The two major methods to improve reliability are redesigning the system for higher reliability or providing redundant components to replace failed elements. The costs of redesign for reliability or adding redundancy are estimated. The most cost-effective combination for high reliability can be identified. The cost of increasing the intrinsic reliability of a system can be modeled as cost proportional to 1/(system failure rate) a , where the exponent “a” measures the difficulty of increasing reliability. The “a” exponent can vary from 0.25 to about 2.5. Operational reliability can also be increased by using redundant systems. The failure rate for N parallel redundant units is (system failure rate) N . The cost of redundancy is N times the system cost. The total redundant system cost is proportional to N/(system failure rate) a . The cost of redundancy increases as N gets larger, but larger N allows a higher system failure rate, which reduces the system design cost. There is a certain N, a certain level of redundancy, that has the minimum cost to achieve the required overall redundant system failure rate. The minimum cost for the redundant system is achieved at the optimum level of redundancy. The N for minimum cost is equal to -a ln (redundant system failure rate). The minimum cost of the N redundant systems is proportional to N * (original system failure rate) a . The optimum redesigned individual system failure rate is proportional to exp (-1/a), so the greater the difficulty, the higher the optimum individual system failure rate. Increasing the intrinsic reliability of a system encounters diminishing returns and at some point it becomes more cost-effective to add redundancy. The difficulty of increasing intrinsic system reliability determines the optimum design for high reliability at minimum cost.

reliability↗

High Reliability at Minimum Cost

This paper investigates the minimum cost of improving the reliability of complex technical systems. The two major methods to improve reliability are redesigning the system for higher reliability or providing redundant components to replace failed elements. The costs of redesign for reliability or adding redundancy are estimated. The most cost-effective combination for high reliability can be identified. The cost of increasing the intrinsic reliability of a system can be modeled as cost proportional to 1/(system failure rate) a , where the exponent “a” measures the difficulty of increasing reliability. The “a” exponent can vary from 0.25 to about 2.5. Operational reliability can also be increased by using redundant systems. The failure rate for N parallel redundant units is (system failure rate) N . The cost of redundancy is N times the system cost. The total redundant system cost is proportional to N/(system failure rate) a . The cost of redundancy increases as N gets larger, but larger N allows a higher system failure rate, which reduces the system design cost. There is a certain N, a certain level of redundancy, that has the minimum cost to achieve the required overall redundant system failure rate. The minimum cost for the redundant system is achieved at the optimum level of redundancy. The N for minimum cost is equal to -a ln (redundant system failure rate). The minimum cost of the N redundant systems is proportional to N * (original system failure rate) a . The optimum redesigned individual system failure rate is proportional to exp (-1/a), so the greater the difficulty, the higher the optimum individual system failure rate. Increasing the intrinsic reliability of a system encounters diminishing returns and at some point it becomes more cost-effective to add redundancy. The difficulty of increasing intrinsic system reliability determines the optimum design for high reliability at minimum cost.

reliability↗

Fabrication Status of ITER Central Solenoid Modules

The fabrication of the modules for the ITER Central Solenoid (CS) is in progress at General Atomics (GA) in Poway, California, USA. This purpose built facility has been established with the requisite tools and machines to fabricate the seven 110 tonne CS modules (six required plus one spare). GA’s project responsibility is completing the fabrication design, developing and qualifying the fabrication processes and tools, fabricating the seven modules, and testing the modules at 4.5 K with full current. The current schedule has the first module’s completing fabrication in 2018 followed by electrical and full current testing. Upon completion of testing, the modules will be shipped to the ITER site for assembly into the CS stack. GA has co mpleted the fabrication of a qualification coil, simulating all of the processes and exercising all of the tooling required to fabricate a production module. After completion, the qualification coil underwent a cool down cycle to 4.5K which served as the final commissioning step of the helium cooling system on the parallel flow paths of a module. In addition, other final test station systems and procedures were simulated to verify their functionality including simulated critical current sharing temperature (Tcs) measurements, DC switch operation to dump the energy from the coil, and a helium leak test on the coil at <10K. After warming the coil, Paschen tests were repeated prior to the coil being dissected to evaluate the quality of the vacuum pressure impregnation (VPI). Dissection is scheduled for early spring 2018 and the results showed full resin impregnation of all areas. In the production and testing of the qualification coil, many lessons were learned and the improvements incorporated into the module fabrication processes. GA currently has five production modules in fabrication, at different stages in the process. The first module is nearly ready for vacuum pressure impregnation. The second and third modules are currently in the insulation process and the 7 pancakes of the forth module are being joined together into a 110 tonne module. Module 5 is currently being wound. The qualification coil has been completed and dissected to evaluate the VPI. A description of the VPI process is provided. To verify the turn insulation of a module, unique impulse testing methods were developed to test the insulation between the 560 turns of a module. These methods are reported in this paper.

Smith, J.↗

Temporal data system

A method for processing data is provided. Data is identified by a computer system. The data is processed in parallel by the computer system using temporal transformations to form pieces of temporal data. The pieces of temporal data are placed by the computer system in an order as the pieces of temporal data are generated by the temporal transformations to form a sequence of temporal data. The order of the sequence is based on a priority of when the pieces of temporal data should be processed, enabling performing an action.

Naegle, John H.↗

Massively parallel, multiple-organ perfusion control system

A fluidic cartridge comprises a fluidic disk having a plurality of alignment openings; a fluidic chip comprising a body, one or more channels formed in the body in fluidic communications with input ports and output ports for transferring one or more fluids between the input ports and the output ports, and a plurality of protrusions formed on the body and received in the alignment openings of the fluidic disk for aligning the fluidic chip to the fluidic disk; an actuator operably engaging with the one or more channels for selectively and individually transferring the one or more fluids through the one or more channels from at least one of the input ports to at least one of the output ports at desired flow rates; and a tube member defining a cylindrical housing for accommodating the fluidic disk, the fluidic chip and the actuator therein.

Reiserer, Ronald S.↗

Learning control system design based on 2-D theory - An application to parallel link manipulator

An approach to iterative learning control system design based on two-dimensional system theory is presented. A two-dimensional model for the iterative learning control system which reveals the connections between learning control systems and two-dimensional system theory is established. A learning control algorithm is proposed, and the convergence of learning using this algorithm is guaranteed by two-dimensional stability. The learning algorithm is applied successfully to the trajectory tracking control problem for a parallel link robot manipulator. The excellent performance of this learning algorithm is demonstrated by the computer simulation results.

Geng, Z.↗

Algorithm for solving the linear Cauchy problem for large systems of ordinary differential equations with the use of parallel computations

An algorithm for solving the linear Cauchy problem for large systems of ordinary differential equations is presented. The algorithm for systems of first-order differential equations is implemented in the EDELWEISS code with the possibility of parallel computations on supercomputers employing the MPI (Message Passing Interface) standard for the data exchange between parallel processes. The solution is represented by a series of orthogonal polynomials on the interval [0, 1]. The algorithm is characterized by simplicity and the possibility to solve nonlinear problems with a correction of the operator in accordance with the solution obtained in the previous iterative process.

74 ATOMIC AND MOLECULAR PHYSICS↗

Parallel methods for dynamic simulation of multiple manipulator systems

In this paper, efficient dynamic simulation algorithms for a system of m manipulators, cooperating to manipulate a large load, are developed; their performance, using two possible forms of parallelism on a general-purpose parallel computer, is investigated. One form, temporal parallelism, is obtained with the use of parallel numerical integration methods. A speedup of 3.78 on four processors of CRAY Y-MP8 was achieved with a parallel four-point block predictor-corrector method for the simulation of a four manipulator system. These multi-point methods suffer from reduced accuracy, and when comparing these runs with a serial integration method, the speedup can be as low as 1.83 for simulations with the same accuracy. To regain the performance lost due to accuracy problems, a second form of parallelism is employed. Spatial parallelism allows most of the dynamics of each manipulator chain to be computed simultaneously. Used exclusively in the four processor case, this form of parallelism in conjunction with a serial integration method results in a speedup of 3.1 on four processors over the best serial method. In cases where there are either more processors available or fewer chains in the system, the multi-point parallel integration methods are still advantageous despite the reduced accuracy because both forms of parallelism can then combine to generate more parallel tasks and achieve greater effective speedups. This paper also includes results for these cases.

Mcmillan, Scott↗