Search NASA⌕ Search

SEARCH · Search NASA

Results for “parametric modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Experimental study of compaction localization in carbonate rock and constitutive modeling of mechanical anisotropy

Abstract Sedimentary rocks are inherently anisotropic and prone to strain localization. While the influence of rock anisotropy on the brittle/dilative regime has been studied extensively, its influence on the ductile/compactive regime is much less explored. This paper discusses the anisotropic behavior of a high‐porosity carbonate rock from central Europe (the Maastricht Tuffeau). A set of triaxial tests with concurrent x‐ray tomography has been performed at different confining pressures. The anisotropic characteristics of this rock have been investigated by testing samples cored at different inclinations of the bedding, thus revealing non‐negligible effects of the coring direction on yielding and compaction behavior. Specifically, samples cored perpendicular to bedding display higher strength and longer stages of post‐yielding deformation before manifesting re‐hardening. Despite such alterations of the inelastic response, Digital Image Correlation has revealed that the strain localization mode is independent of the coring direction, thus being primarily affected by the confinement level. To capture the observed interaction between material anisotropy and compaction behavior at the continuum‐scale, an elastoplastic constitutive law has been proposed. For this purpose, a set of tensorial bases has been introduced to replicate how the oriented rock fabric modulates the yielding and plastic flow characteristics of the material. The analyses show that the impact of the coring direction on yield function and plastic flow rule is fundamentally different, thus requiring the use of distinct projection strategies (a strategy here defined heterotopic mapping). The performance of the model, studied through parametric analyses and by calibrating the experimental results, illustrates the improved capability of the proposed constitutive approach when applied to strongly anisotropic porous rocks.

Shahin, Ghassan↗

Evaluating commercial feasibility of a new tall wind tower design concept using a stochastic levelized cost of energy model

Wind power generation has seen a dramatic increase in the 21st century and the Department of Energy (DOE) envisions that wind energy will become a much larger part of overall power generation in the U.S. by 2050. Wind turbines have continued to grow in size during the last few decades with towers commonly built at a height of 80 m for typical utility-scale turbines in the Unites States, and this is accompanied by certain transportation and logistics challenges. The newly proposed tall tower technology has been designed to be cost-effective in assembling towers as high as 140 m from precast concrete module components that are capable of transport on the U.S. road system. This paper presents an alternative wind tower design with potential for reducing the overall levelized cost of energy (LCOE); it evaluates a hexagonal precast concrete wind tower solution that facilitates use of a taller wind turbine generator for harvesting stronger, steadier, and more frequent wind resources to increase wind energy production and lower the overall LCOE. An integrated team of industry experts was consulted to support development of a stochastic life cycle cost model using a parametric estimate of the cost and fabrication and assembly schedules of this new wind tower design concept as well as forecasting the projected revenue to be created by the new technology. The study concludes that this new design concept is a commercially viable solution, with an estimated LCOE savings ranging from 2% to 4% compared with the typical 80 m turbine deployed in the United States, and it also provides wind power potential to previously untapped regions in the country. This article helps to inform energy developers, manufacturers, and policy makers, both regionally and nationally, of a possible economically feasible wind tower design solution.

17 WIND ENERGY↗

The importance of Ion Interactions on Electrolyte Solution Viscosities Determined by Comparing Concentrated Sodium Carbonate and Nitrate Solutions

Sodium carbonate is a common electrolyte in high pH aqueous solution, and its contribution to the viscosity of those electrolytes solutions is of practical importance. Nitrite is isostructural with carbonate, and has nearly identical ionic radius. The relative importance of ionic size versus interactions with water on electrolyte solution viscosity at moderate and high electrolyte concentrations has been ambiguous in the literature for a long time. Comparing the viscosity of sodium carbonate and sodium nitrate solution showed that carbonate solutions are considerably more viscous than nitrate solutions at constant sodium molality even though there is half as many anions in the carbonate solution as nitrate solution. This clearly shows that interactions with water are more important than ion size for the viscosity of these solutions because these two electrolytes with nearly identical ion size have very large differences in viscosity. This comparison was aided by new data on the viscosity of sodium carbonate solutions, which was also used to parametrize the Laliberté model of electrolyte solution viscosities between 20 and 98 °C.

Viscosity, Hanford, Sodium Carbonate↗

An Estimation of Hybrid Quantum Mechanical Molecular Mechanical Polarization Energies for Small Molecules Using Polarizable Force-Field Approaches

Here in this work, we report two polarizable molecular mechanics (polMM) force field models for estimating the polarization energy in hybrid quantum mechanical molecular mechanical (QM/MM) calculations. These two models, named the potential of atomic charges (PAC) and potential of atomic dipoles (PAD), are formulated from the ab initio quantum mechanical (QM) response kernels for the prediction of the QM density response to an external molecular mechanical (MM) environment (as described by external point charges). The PAC model is similar to fluctuating charge (FQ) models because the energy depends on external electrostatic potential values at QM atomic sites; the PAD energy depends on external electrostatic field values at QM atomic sites, resembling induced dipole (ID) models. To demonstrate their uses, we apply the PAC and PAD models to 12 small molecules, which are solvated by TIP3P water. The PAC model reproduces the QM/MM polarization energy with a R 2 value of 0.71 for aniline (in 10,000 TIP3P water configurations) and 0.87 or higher for other eleven solute molecules, while the PAD model has a much better performance with R 2 values of 0.98 or higher. The PAC model reproduces reference QM/MM hydration free energies for 12 solute molecules with a RMSD of 0.59 kcal/mol. The PAD model is even more accurate, with a much smaller RMSD of 0.12 kcal/mol, with respect to the reference. Lastly, this suggests that polarization effects, including both local charge distortion and intramolecular charge transfer, can be well captured by induced dipole type models with proper parametrization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

General Acid-Type Catalysis in the Dehydrative Aromatization of Furans to Aromatics in H-[Al]-BEA, H-[Fe]-BEA, H-[Ga]-BEA, and H-[B]-BEA Zeolites

Al, Ga, Fe, and B metal substituents have been examined for their ability to change the Brønsted acid strength of BEA zeolite and inhibit undesired hydrolysis in the production of aromatics from furan, 2-methylfuran, and 2,5-dimethylfuran. We employed electronic structure calculations to examine this series of furans in H-[Al]-, H-[Fe]-, H-[Ga]-, and H-[B]-BEA zeolites. These calculations were used to parametrize a microkinetic model to make direct comparisons to experiments run with furan and DMF in the weakest and strongest acid zeolites, H-[B]-BEA and H-[Al]-BEA, respectively. Electronic structure calculations revealed that the Diels–Alder reaction remains unaffected by changes to the Brønsted acid strength of the zeolite, whereas the dehydration and hydrolysis reactions are affected in a fashion reminiscent of general acid catalysis. Interestingly, despite its significantly lower acid strength, H-[B]-BEA was experimentally shown to have an activity similar to that of H-[Al]-BEA for the production of both benzene and p-xylene from furan and 2,5-dimethylfuran, respectively. Analysis with the microkinetic model revealed that, even with this weaker heterogeneous acid site, the dehydration reaction is sufficiently catalyzed, activating the aromatic production pathway. Finally, the use of a weaker, heterogeneous Brønsted-acidic zeolite did not have a significant effect on the product selectivity, however, indicating that the same reaction pathways are active with both catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solution-Phase Conformation and Dynamics of Conjugated Isoindigo-Based Donor–Acceptor Polymer Single Chains

Conjugated polymers are the key material in thin-film organic optoelectronic devices due to the versatility of these molecules combined with their semiconducting properties. A molecular-scale understanding of conjugated polymers is important to the optimization of the thin-film morphology. We examine the solution-phase behavior of conjugated isoindigo-based donor–acceptor polymer single chains of various chain lengths using atomistic molecular dynamics simulations. Our simulations elucidate the transition from a rod-like to a coil-like conformation from an analysis of normal modes and persistence length. In addition, we find another transition based on the solvent environment, contrasting the coil-like conformation in a good solvent with a globule-like conformation in a poor solvent. Altogether, our results provide valuable insights into the transition between conformational regimes for conjugated polymers as a function of both the chain length and the solvent environment, which will help to accurately parametrize higher level models.

36 MATERIALS SCIENCE↗

Non-additive microbial community responses to environmental complexity

Environmental composition is a major, though poorly understood, determinant of microbiome dynamics. Here we ask whether general principles govern how microbial community growth yield and diversity scale with an increasing number of environmental molecules. By assembling hundreds of synthetic consortia in vitro, we find that growth yield can remain constant or increase in a non-additive manner with environmental complexity. Conversely, taxonomic diversity is often much lower than expected. To better understand these deviations, we formulate metrics for epistatic interactions between environments and use them to compare our results to communities simulated with experimentally-parametrized consumer resource models. We find that key metabolic and ecological factors, including species similarity, degree of specialization, and metabolic interactions, modulate the observed non-additivity and govern the response of communities to combinations of resource pools. Our results demonstrate that environmental complexity alone is not sufficient for maintaining community diversity, and provide practical guidance for designing and controlling microbial ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗

Optical properties of amorphous and crystalline Sb-doped SnO{sub 2} thin films studied with spectroscopic ellipsometry: Optical gap energy and effective mass

We investigated the optical properties of amorphous and crystalline antimony (Sb)-doped tin dioxide (SnO{sub 2}) thin films grown using the co-sputtering deposition method at room temperature. We used undoped and Sb-doped (8 wt. %) SnO{sub 2} targets. Varying the relative power ratio of the two targets, we controlled the Sb-composition of the SnO{sub 2}:Sb thin films up to 2.3 at. % of Sb contents. Through annealing, the as-grown amorphous SnO{sub 2}:Sb thin films were transformed to crystalline thin films. Dielectric functions were obtained from the measured ellipsometry angles, Ψ and Δ, using the Drude and parametric optical constant models. We determined the absorption coefficients and optical gap energies of the SnO{sub 2}:Sb thin films from the dielectric functions. We found increasing optical gap energy with increasing Sb composition. Increases in the Drude tail amplitudes, a signature of free carrier concentrations, were found in annealed, crystalline thin films with increasing Sb composition. The increase in the optical gap energy with increasing Sb composition was mainly attributed to the Burstein-Moss effect. Using Hall effect measurements, we obtained Hall carrier concentrations (N{sub Hall}) and electron Hall mobilities (μ{sub Hall}). The carrier concentrations and mobilities increased from 2.6 × 10{sup 19 }cm{sup −3} and 1.0 cm{sup 2}/(V s) to 2.0 × 10{sup 20 }cm{sup −1} and 7.2 cm{sup 2}/(V s), respectively, with increasing Sb contents. This result suggests that the nominally undoped SnO{sub 2} films are unintentionally n-type doped. Assuming that the N{sub Hall} and optical carrier concentrations (N{sub opt}) were the same, we obtained the effective masses of the SnO{sub 2}:Sb thin films with increasing Sb compositions. The effective masses of the SnO{sub 2}:Sb thin films increased from 0.245 m{sub 0} to 0.4 m{sub 0} with increasing Sb doping contents, and the nonparabolicity of the conduction band was estimated. We discussed the relation between the optical (μ{sub opt}) and Hall (μ{sub Hall}) mobilities as a function of Sb contents and grain sizes.

36 MATERIALS SCIENCE↗

Transit timing variations for planets co-orbiting in the horseshoe regime

Although not yet detected, pairs of exoplanets in 1:1 mean motion resonance probably exist. Low eccentricity, near-planar orbits, which in the comoving frame follow horseshoe trajectories, are one of the possible stable configurations. Here we study transit timing variations (TTVs) produced by mutual gravitational interaction of planets in this orbital architecture, with the goal to develop methods that can be used to recognize this case in observational data. In particular, we use a semi-analytic model to derive parametric constraints that should facilitate data analysis. We show that characteristic traits of the TTVs can directly constrain the (1) ratio of planetary masses and (2) their total mass (divided by that of the central star) as a function of the minimum angular separation as seen from the star. In an ideal case, when transits of both planets are observed and well characterized, the minimum angular separation can also be inferred from the data. As a result, parameters derived from the observed transit timing series alone can directly provide both planetary masses scaled to the central star mass.

79 ASTRONOMY AND ASTROPHYSICS↗

ELEMENTAL DEPLETIONS IN THE MAGELLANIC CLOUDS AND THE EVOLUTION OF DEPLETIONS WITH METALLICITY

We present a study of the composition of gas and dust in the Large and Small Magellanic Clouds (LMC and SMC) using UV absorption spectroscopy. We measure P ii and Fe ii along 84 spatially distributed sightlines toward the MCs using archival Far Ultraviolet Spectroscopic Explorer observations. For 16 of those sightlines, we also measure Si ii, Cr ii, and Zn ii from new Hubble Space Telescope Cosmic Origins Spectrograph observations. We analyze these spectra using a new spectral line analysis technique based on a semi-parametric Voigt profile model. We have combined these measurements with H i and H{sub 2} column densities and reference stellar abundances from the literature to derive gas-phase abundances, depletions, and gas-to-dust ratios (GDRs). Of our 84 P and 16 Zn measurements, 80 and 13, respectively, are depleted by more than 0.1 dex, suggesting that P and Zn abundances are not accurate metallicity indicators at and above the metallicity of the SMC. Si, Cr, and Fe are systematically less depleted in the SMC than in the Milky Way (MW) or LMC. The minimum Si depletion in the SMC is consistent with zero. We find GDR ranges of 190–565 in the LMC and 480–2100 in the SMC, which is broadly consistent with GDRs from the literature. These ranges represent actual location to location variation and are evidence of dust destruction and/or growth in the diffuse neutral phase of the interstellar medium. Where they overlap in metallicity, the gas-phase abundances of the MW, LMC, and SMC and damped Lyα systems evolve similarly with metallicity.

79 ASTRONOMY AND ASTROPHYSICS↗

Low-frequency Raman active modes of twisted bilayer MoS 2

Abstract We study the low-frequency Raman active modes of twisted bilayer MoS 2 for several twist angles using a force-field approach and a parametrized bond polarizability model. We show that twist angles near high-symmetry stacking configurations exhibit stacking frustration that leads to significant buckling of the moiré superlattice. We find that atomic relaxation due to the twist is of prime importance. The periodic displacement of the Mo atoms shows the realization of a soliton network, and in turn, leads to the emergence of a number of frequency modes not seen in the high-symmetry stacking systems. Some of the modes are only seen in the XZ Raman polarization setup while others are seen in the XY setup. The symmetry of the normal modes, and how this affects the Raman tensors is examined in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The path integral for the statistical sum of the microcanonical ensemble in cosmology

The path integral is calculated for the statistical sum of the microcanonical ensemble in a generic time-parametrization invariant gravitational model with the Friedman-Robertson-Walker (FRW) metric. This represents the first example of a systematic calculation of the Faddeev-Popov gauge-fixed path integral in the minisuperspace sector of quantum cosmology. The gauge fixing procedure, together with gauging out local diffeomorphisms, also handles the residual symmetries associated with the conformal Killing vector of the FRW metric and incorporates the Batalin-Vilkovisky quantization technique for gauge theories with linearly dependent generators. For a subset of saddle-point instantons, characterized by a single oscillation of the FRW scale factor, this technique is designed to obtain the one-loop statistical sum in the recently suggested model of cosmological initial conditions generated by a conformal field theory with a large number of quantum species.

79 ASTRONOMY AND ASTROPHYSICS↗

Signatures of anisotropic sources in the trispectrum of the cosmic microwave background

Soft limits of N-point correlation functions, in which one wavenumber is much smaller than the others, play a special role in constraining the physics of inflation. Anisotropic sources such as a vector field during inflation generate distinct angular dependence in all these correlators, and introduce a fix privileged direction in our sky. In this paper we focus on the four-point correlator (the trispectrum T). We adopt a parametrization motivated by models in which the inflaton φ is coupled to a vector field through a I{sup 2}(φ)F{sup 2} interaction, namely T{sub ζ}(k{sub 1},k{sub 2},k{sub 3},k{sub 4})≡∑{sub n}d{sub n}[P{sub n}( k-circumflex {sub 1}⋅ k-circumflex {sub 3})+P{sub n}( k-circumflex {sub 1}⋅ k-circumflex {sub 12})+P{sub n}( k-circumflex {sub 3}⋅ k-circumflex {sub 12})]P{sub ζ}(k{sub 1})P{sub ζ}(k{sub 3})P{sub ζ}(k{sub 12})+(23perm), where P{sub n} denotes the Legendre polynomials. This shape is enhanced when the wavenumbers of the diagonals of the quadrilateral are much smaller than the sides, k{sub i}. The coefficient of the isotropic part, d{sub 0}, is equal to τ{sub NL}/6 discussed in the literature. A I{sup 2}(φ)F{sup 2} interaction generates d{sub 2} = 2d{sub 0} which is, in turn, related to the quadrupole modulation parameter of the power spectrum, g{sub *}, as d{sub 2} ≈ 14|g{sub *}|N{sup 2} with N ≈ 60. We show that d{sub 0} and d{sub 2} can be equally well-constrained: the expected 68% CL error bars on these coefficients from a cosmic-variance-limited experiment measuring temperature anisotropy of the cosmic microwave background up to ℓ{sub max} = 2000 are δd{sub 2} ≈ 4δd{sub 0} = 105. Therefore, we can reach |g{sub *}| = 10{sup −3} by measuring the angle-dependent trispectrum. The current upper limit on τ{sub NL} from the Planck temperature maps yields |g{sub *}| < 0.02 (95% CL)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Red nuggets grow inside-out: evidence from gravitational lensing

Here, we present a new sample of strong gravitational lens systems where both the foreground lenses and background sources are early-type galaxies. Using imaging from Hubble Space Telescope (HST)/Advanced Camera for Studies (ACS) and Keck/NIRC2, we model the surface brightness distributions and show that the sources form a distinct population of massive, compact galaxies at redshifts 0.4 ≲ z ≲ 0.7, lying systematically below the size–mass relation of the global elliptical galaxy population at those redshifts. These may therefore represent relics of high-redshift red nuggets or their partly evolved descendants. We exploit the magnifying effect of lensing to investigate the structural properties, stellar masses and stellar populations of these objects with a view to understanding their evolution. We model these objects parametrically and find that they generally require two Sérsic components to properly describe their light profiles, with one more spheroidal component alongside a more envelope-like component, which is slightly more extended though still compact. This is consistent with the hypothesis of the inside-out growth of these objects via minor mergers. Lastly, we also find that the sources can be characterized by red-to-blue colour gradients as a function of radius which are stronger at low redshift – indicative of ongoing accretion – but that their environments generally appear consistent with that of the general elliptical galaxy population, contrary to recent suggestions that these objects are pre-dominantly associated with clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Multimode model for projective photon-counting measurements

We present a general model to account for the multimode nature of the quantum electromagnetic field in projective photon-counting measurements. We focus on photon-subtraction experiments, where non-Gaussian states are produced conditionally. These are useful states for continuous-variable quantum-information processing. We present a general method called mode reduction that reduces the multimode model to an effective two-mode problem. We apply this method to a multimode model describing broadband parametric down-conversion, thereby improving the analysis of existing experimental results. The main improvement is that spatial and frequency filters before the photon detector are taken into account explicitly. We find excellent agreement with previously published experimental results, using fewer free parameters than before, and discuss the implications of our analysis for the optimized production of states with negative Wigner functions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancement of correlated photon-pair generation from a positive-negative index material heterostructure

The generation efficiency of correlated photon pairs from a positive-negative index material heterostructure has been investigated by using a rigorous quantum model of spontaneous parametric down-conversion. The mean number of output photon pairs and the signal-field energy spectrum have been calculated. It is shown that the strong confinements of both the pump and signal fields around the resonance state result in a giant enhancement of the correlated photon-pair generation. The generation rate of the correlated photon pair can be improved by several orders of magnitude in the present structure in comparison with those in the corresponding conventional resonant cavity. This means that the present structure can be applied as a highly efficient potential source for entangled photon pairs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatial properties of entangled photon pairs generated in nonlinear layered structures

A spatial quantum model of spontaneous parametric down-conversion in nonlinear layered structures is developed expanding the interacting vectorial fields into monochromatic plane waves. A two-photon spectral amplitude depending on the signal- and idler-field frequencies and propagation directions is used to derive transverse profiles of the emitted fields as well as their spatial correlations. Intensity spatial profiles and their spatial correlations are mainly determined by the positions of transmission peaks formed in these structures with photonic bands. A method for geometry optimization of the structures with respect to efficiency of the nonlinear process is suggested. Several structures composed of GaN/AlN layers are analyzed as typical examples. They allow the generation of photon pairs correlated in several emission directions. Photon-pair generation rates increasing better than the second power of the number of layers can be reached. Also, structures efficiently generated photon pairs showing antibunching and anticoalescence can be obtained. Three reasons for splitting the correlated area in photonic-band-gap structures are revealed: zig-zag movement of photons inside the structure, spatial symmetry, and polarization-dependent properties. Also, spectral splitting can be observed in these structures.

74 ATOMIC AND MOLECULAR PHYSICS↗

Phase diagram of Rydberg atoms with repulsive van der Waals interaction

We report a quantum Monte Carlo calculation of the phase diagram of bosons interacting with a repulsive inverse sixth power pair potential, a model for assemblies of Rydberg atoms in the local van der Waals blockade regime. The model can be parametrized in terms of just two parameters, the reduced density and temperature. Solidification happens to the fcc phase. At zero temperature, the transition density is found with the diffusion Monte Carlo method at density {rho}=3.9 (({Dirac_h}/2{pi}){sup 2}/mC{sub 6}){sup 3/4}, where C{sub 6} is the strength of the interaction. The solidification curve at nonzero temperature is studied with the path-integral Monte Carlo approach and is compared with transitions in corresponding harmonic and classical crystals. Relaxation mechanisms are considered in relation to present experiments.

74 ATOMIC AND MOLECULAR PHYSICS↗