Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Preparation and photocatalytic ability of highly defective carbon nanotubes

The highly defective carbon nanotubes (CNTs) were prepared using a heat-treatment technique and their photocatalytic ability was reported for the first time. The results showed that the highly defective CNTs had the photocatalytic ability in the range of visible light. The results also indicated that the electrical properties of CNTs were dependent not only on the diameter and helicity but also on the defect number of tubes. The defects of CNTs might be produced from vacancies, local lattice reordering and intertube reorientation during the course of the desorption of oxygen atoms, which could initiate defect states in the band gap. Absorption of visible light led to the formation of electron/hole pairs and hence caused photocatalytic oxidation. Consequently, the highly defective CNTs having the photocatalytic ability would be promising as a new photocatalytic material in the visible light. - Graphical abstract: The highly defective carbon nanotubes (CNTs) were prepared using a heat-treatment technique. The results showed that the highly defective CNTs had the photocatalytic ability in the range of visible light.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The effect of structural vacancies on the thermoelectric properties of (Cu₂Te){sub 1–x}(Ga₂Te₃) x

We have studied the effects of structural vacancies on the thermoelectric properties of the ternary compounds (Cu₂Te) 1–x (Ga₂Te₃) x (x=0.5, 0.55, 0.571, 0.6, 0.625, 0.667 and 0.75), which are solid solutions found in the pseudo-binary phase diagram for Cu₂Te and Ga₂Te₃, and possesses tunable structural vacancy concentrations. This materials system is not suitable due to the cost and scarcity of the constituent elements, but the vacancy behavior is well understood and will provide a valuable test case for other systems more suitable from the standpoint of cost and abundance of raw materials, which also possesses these vacancy features, but whose structural characterization is lacking at this stage. We find that the nominally defect free phase CuGaTe₂ possess the highest ZT (ZT=S²T/ρκ, where S is the Seebeck coefficient and ρ is the electrical resistivity κ is the thermal conductivity and T is the absolute temperature) which approaches 1 at 840 K and seems to continuously increase above this temperature. This result is due to the unexpectedly low thermal conductivity found for this material at high temperature. The low thermal conductivity was caused by strong Umklapp (thermally resistive scattering processes involving three phonons) phonon scattering. We find that due to the coincidentally strong scattering of carriers by the structural defects that higher concentrations of these features lead to poor electrical transport properties and decreased ZT. - Graphical abstract: Thermal conductivity and zT as a function of temperature for a series of compounds of the type (Cu₂Te) 1–x (Ga₂Te₃)x (x=0.5, 0.55, 0.571, 0.6, 0.625, 0.667 and 0.75). Highlights: • All the samples show p-type semiconducting behavior in the temperature dependence of the Seebeck and Hall coefficients. • The increased carrier concentration and the introduction of vacancies diminish the carrier mobility and power factor. • The low temperature k decreases significantly as the Ga₂Te₃ content increases due to increasing point defects. • The highest ZT ~ 1.0 at 840 K among the samples in this study was found in CuGaTe₂, which contains no vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single crystal structure and SHG of defect pyrochlores CsB{sup V}MoO{sub 6} (B{sup V}=Nb,Ta)

The crystal structure and non-linear optical properties of CsNbMoO{sub 6} and CsTaMoO{sub 6} defect pyrochlores have been studied. The single crystals of these compounds grown by the flux method possess an octahedral faceting and reach up to 50 µm in size. The crystal structures of CsB{sup V}MoO{sub 6} (B{sup V}=Nb, Ta) were investigated by X-ray diffraction method. Both compounds crystallize in the cubic symmetry with noncentrosymmetric space group F-43m. The second harmonic generation of CsNbMoO{sub 6} and CsTaMoO{sub 6}was found to be 1.6×10{sup −2} and 8.5×10{sup −4} of lithium niobate, correspondingly. It has been determined that distortions of [MO{sub 6}] polyhedra (M=Nb, Ta, Mo) as well as polarizability and covalency of Nb–O and Ta–O bonds have a great effect on the second harmonic generation. - Highlights: • CsNbMoO{sub 6} and CsTaMoO{sub 6} homogeneous single crystals have been grown. • The crystal structure of CsTaMoO{sub 6} has been studied. • Nonlinear optical properties of CsNbMoO{sub 6} and CsTaMoO{sub 6} have been found. • The microscopic origin of the second harmonic generation (SHG) response have been identified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural transition in rare earth doped zirconium oxide: A positron annihilation study

Graphical abstract: New microstructural analysis and phase transition of rare earth doped mixed oxide compounds such as: Sm{sub 2−x}Dy{sub x}Zr{sub 2}O{sub 7} (where x = 0.0 ≤ x ≥ 2.0) that are potentially useful as solid oxide fuels, ionic conductors, optoelectronic materials and most importantly as radiation resistant host for high level rad-waste disposal, structural transition in the system is reported through positron annihilation spectroscopy as there is an indication in the X-ray diffraction analysis. Highlights: ► Zirconium oxide material doped with rare earth ions. ► The method of positron annihilation spectroscopy suggests a phase transition in the system. ► The crystal structure transformation from pure pyrochlore to defect fluorite type of structure is shown by X-ray diffraction results. -- Abstract: A series of compounds with the general composition Sm{sub 2−x}Dy{sub x}Zr{sub 2}O{sub 7} (where 0 ≤ x ≥ 2.0) were synthesized by chemical route and characterized by powder X-ray diffraction (XRD) analysis. The rare earth ion namely Sm{sup +3} in the compound was gradually replaced with another smaller and heavier ion, Dy{sup +3} of the 4f series, there by resulting in order–disorder structural transition, which has been studied by positron annihilation lifetime and Doppler broadening spectroscopy. This study reveals the subtle electronic micro environmental changes in the pyrochlore lattice (prevalent due to the oxygen vacancy in anti-site defect structure of the compound) toward its transformation to defect fluorite structure as found in Dy{sub 2}Zr{sub 2}O{sub 7}. A comparison of the changes perceived with PAS as compared to XRD analysis is critically assayed.

36 MATERIALS SCIENCE↗

High-frequency detection of the formation and stabilization of a radiation-induced defect cluster in semiconductor structures

The processes of the formation and stabilization of a radiation-induced defect cluster upon the arrival of a fast neutron to the space-charge region of a semiconductor diode are analyzed. The current pulse formed by secondary electrons is calculated and the spectrum of the signal generated by the diode (detector) under the action of an instantaneous neutron flux of the fission spectrum is determined. The possibility of experimental detection of the picosecond radiation-induced transition processes is discussed.

36 MATERIALS SCIENCE↗

Segregation of liquid crystal mixtures in topological defects

The structure and physical properties of liquid crystal (LC) mixtures are a function of composition, and small changes can have pronounced effects on observables, such as phase-transition temperatures. Traditionally, LC mixtures have been assumed to be compositionally homogenous. The results of chemically detailed simulations presented here show that this is not the case; pronounced deviations of the local order from that observed in the bulk at defects and interfaces lead to significant compositional segregation effects. More specifically, two disclination lines are stabilized in this work by introducing into a nematic liquid crystal mixture a cylindrical body that exhibits perpendicular anchoring. Here, it is found that the local composition deviates considerably from that of the bulk at the interface with the cylinder and in the defects, thereby suggesting new assembly and synthetic strategies that may capitalize on the unusual molecular environment provided by liquid crystal mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Specific features of formation of radiation defects in the silicon layer in 'silicon-on-insulator' structures

Specific features of formation of radiation defects in thin silicon layer of silicon-on-insulator (SOI) structures have been studied. It is shown that there are differences between variations in the structural and electrical properties of the thin silicon layer and those in bulk silicon crystals (with similar electrical characteristics) subjected to the same radiation effect. It is established that the embedded insulator in the SOI structure represents a barrier for motion of radiation-induced intrinsic interstitial silicon atoms, which brings about an increase in the dose of bombarding ions, which leads to the loss of single-crystallinity of the silicon layer in a SOI structure. It is shown that {gamma}-ray irradiation with doses unaffecting the electrical conductivity of bulk silicon crystals appreciably affects the conductivity of the silicon layer in the SOI structures. In addition, variation in the conductivity of silicon layer is related to variation in the density of surface states at the interface between the silicon layer and the built-in insulator, rather than to generation of conventional radiation-induced structural defects in silicon.

36 MATERIALS SCIENCE↗

First-Principles Analysis of Defect-Mediated Li Adsorption on Graphene

To evaluate the possible utility of single layer graphene for applications in Li ion batteries, an extensive series of periodic density functional theory (DFT) calculations are performed on graphene sheets with both point and extended defects for a wide range of lithium coverages. Consistent with recent reports, it is found that Li adsorption on defect-free single layer graphene is not thermodynamically favorable compared to bulk metallic Li. However, graphene surfaces activated by defects are generally found to bind Li more strongly, and the interaction strength is sensitive to both the nature of the defects and their densities. Double vacancy defects are found to have much stronger interactions with Li as compared to Stone–Wales defects, and increasing defect density also enhances the interaction of the Stone–Wales defects with Li. Li interaction with one-dimensional extended defects on graphene is additionally found to be strong and leads to increased Li adsorption. A rigorous thermodynamic analysis of these data establishes the theoretical Li storage capacities of the defected graphene structures. In some cases, these capacities are found to approach, although not exceed, those of graphite. The results provide new insights into the fundamental physics of adsorbate interactions with graphene defects and suggest that careful defect engineering of graphene might, ultimately, provide anode electrodes of suitable capacity for lithium ion battery applications.

36 MATERIALS SCIENCE↗

Topologically trivial gap-filling in superconducting Fe(Se,Te) by one-dimensional defects

Abstract Structural distortions and imperfections are a crucial aspect of materials science, on the macroscopic scale providing strength, but also enhancing corrosion and reducing electrical and thermal conductivity. At the nanometre scale, multi-atom imperfections, such as atomic chains and crystalline domain walls have conversely been proposed as a route to topological superconductivity, whose most prominent characteristic is the emergence of Majorana Fermions that can be used for error-free quantum computing. Here, we shed more light on the nature of purported domain walls in Fe(Se,Te) that may host 1D dispersing Majorana modes. We show that the displacement shift of the atomic lattice at these line-defects results from sub-surface impurities that warp the topmost layer(s). Using the electric field between the tip and sample, we manage to reposition the sub-surface impurities, directly visualizing the displacement shift and the underlying defect-free lattice. These results, combined with observations of a completely different type of 1D defect where superconductivity remains fully gapped, highlight the topologically trivial nature of 1D defects in Fe(Se,Te).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Breatherlike defects and their dynamics in the one-dimensional roll structure of twisted nematics

The dynamics of the nonsingular defects in the periodic structures of the rolls that appear in π/2-twisted nematic liquid crystals during electroconvection is studied experimentally and theoretically. The roll structures in twisted nematics are characterized by the presence of an axial component of the hydrodynamic flow velocity with opposite directions in neighboring rolls. The critical oscillation frequency of structural defects is quantitatively estimated using a nonlinear equation of motion for roll displacements. It is found that a pair of edge dislocations with topological charges of +1 and–1 nucleates and annihilates periodically during the oscillations of a defect with a nonsingular core. Oscillating defects with a zero topological charge is shown to correspond to the solution of the sine-Gordon equation in the form of standing breathers. Asymmetry is detected in the full oscillation cycle of a breather defect, and it is related to the twist symmetry of a twist nematic. This asymmetry is taken into account as effective anisotropic friction. The behavior of a breather on a trap, namely, a classical defect (dislocation), is investigated. Dislocation motion is shown to be anisotropic in the oscillation cycle: in one direction, a dislocation moves regularly; in the second phase, the transition into the initial state proceeds via the decay of the breather into a dipole pair of dislocations of opposite signs followed by their annihilation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface Defect Chemistry and Electronic Structure of Pr 0.1 Ce 0.9 O 2-δ Revealed in Operando

Understanding the surface defect chemistry of oxides under functional operating conditions is important for providing guidelines for improving the kinetics of electrochemical reactions. Ceria-based oxides have applications in solid oxide fuel/electrolysis cells, thermo-chemical water splitting, catalytic convertors, and red-ox active memristive devices. The surface defect chemistry of doped ceria in the regime of high oxygen pressure, pO 2 , approximating the operating conditions of fuel cell cathodes at elevated temperatures, has not yet been revealed. In this paper, we investigated the Pr 0.1 Ce 0.9 O 2-δ (PCO) surface by in operando X-ray photoelectron and absorption spectroscopic methods. We quantified the concentration of reduced Pr 3+ , at the near-surface region of PCO as a function of electrochemical potential, corresponding to a wide range of effective pO 2 . We found that the Pr 3+ concentration at the surface was significantly higher than the values predicted from bulk defect chemistry. This finding indicates a lower effective defect formation energy at the surface region compared with that in the bulk. Finally, in addition, the Pr 3+ concentration has a weaker dependence on pO 2 compared to that in the bulk.

36 MATERIALS SCIENCE↗

Influence of Superlattice Structure on V-Defect Distribution, External Quantum Efficiency and Electroluminescence for Red InGaN Based µLEDs on Silicon

Achieving high quantum efficiency in long-wavelength LEDs has posed a significant challenge to the solid-state lighting and display industries. In this article, we use V-defect engineering as a technique to achieve higher efficiencies in red InGaN LEDs on (111) Si through lateral injection. We investigate the effects of superlattice structure on the V-defect distribution, the electroluminescence properties, and the external quantum efficiency. Increasing the relative thickness of In in the InGaN/GaN superlattice and the total superlattice thickness correlate with a reduction of active region defects and increased external quantum efficiencies. The highest measured on-chip EQE was 0.15% and based on Monte-Carlo ray tracing simulations for light extraction we project this would correspond to a flip-chip EQE of ~2.5%.

36 MATERIALS SCIENCE↗

Strain effects on oxygen transport in tetragonal zirconium dioxide

Temperature accelerated dynamics and molecular dynamics simulations are used to investigate the strain effects on oxygen interstitial and vacancy migration in tetragonal zirconium dioxide. At zero external strain, the anisotropic migration mechanisms of oxygen defects are characterized. At non-zero strains, both the crystal structure and defect migration barriers are modified by strain. Under compressive strains, the defect migration barrier increases with the increasing strain for both interstitials and vacancies. The crystal structure transforms from a tetragonal to a nearly cubic fluorite structure. Accordingly, the defect migration becomes nearly isotropic. Under dilative strains, the migration barrier first decreases then increases with increasing strain for both types of defects. The tetragonal phase transforms to a lower symmetry structure that is close to the orthorhombic phase. In turn, the defect migration becomes highly anisotropic. Under both compressive and dilative strains, interstitials respond to strain more strongly than vacancies. At small dilative strains, an oxygen interstitial has comparable diffusivity to a vacancy, suggesting that both types of defects can contribute to oxygen transport, if they are present. Although currently no previous result is available to validate oxygen interstitial diffusion behavior, the trend of strain effects on oxygen vacancy diffusion is in good agreement with available experimental and theoretical studies in the literature.

36 MATERIALS SCIENCE↗

RE/ZrO{sub 2} (RE = Sm, Eu) composite oxide nano-materials: Synthesis and applications in photocatalysis

Graphical abstract: - Highlights: • RE/ZrO{sub 2} (RE = Sm, Eu) nano-materials have been successfully synthesized. • Defect and electron structures determine the absorption properties on visible light. • Nano-sized Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} has good visible-light-responsive photocatalytic activities. • In the future, it can be used in wastewater treatment and environmental protection. - Abstract: Zirconia modified by Samarium/Europium, RE/ZrO{sub 2} (RE = Sm, Eu), composite oxide nano-materials have been successfully synthesized by improved sol–gel method. Characterization results show that X-ray diffraction (XRD) peaks of products gradually shift to the lower angle with the increase of rare earth which implies that the lattice distances of RE/ZrO{sub 2} nano-materials are gradually enlarged. Moreover, the molar ratios between zirconium and rare earth are consistent with the chemical formula and both of them are uniformly distributed in samples. Optical properties indicate that defect structures and electron configurations of RE/ZrO{sub 2} (RE = Sm, Eu) with single phase determine their absorption properties on visible light. Photocatalytic experiments indicate Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} nano-crystals have excellent visible-light-responsive photocatalytic activities on Methylene blue and Rhodamine B which results from the special defect structure, suitable electronic configuration, and larger specific surface area. It follows that Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} nano-crystals are new visible-light-responsive photocatalysts which can be applied in dye wastewater treatment and environmental protection in the future.

36 MATERIALS SCIENCE↗

Interplay of electronic structure, magnetism, strain, and defects in carbide $\mathrm{MX}$enes

We report the two-dimensional (2D) magnetic and semiconducting materials, including carbide MXenes, are in high demand for magneto-electronic devices and applications. Here, we report a first-principles study of electronic structure and magnetism of a Ti 2 C MXene, its derivatives Ti 2 CT 2 (T = -F, -O, -OH, -H), and the effect of single vacancy defects (25% C, 12.5% O, and 12.5% and 5.5% Ti) and transition metal (V, Cr, Mn, and Co) dopings. The MAX phase Ti 2 AlC is a non-magnetic (NM) metal which upon removal of Al layer forms a pristine Ti 2 C MXene with A-type antiferromagnetic (AFM) semiconductor having reliable transition temperature (T N = 41K) predicted by the Heisenberg model. All the functionalized MXenes are stable as NM metal except for Ti 2 CO 2 which remains semiconducting with NM ground state. The significant effect of spin–orbit coupling (SOC) is evident in the band structure forming Dirac-like cones and band inversions near the Fermi level. Depending upon the type of vacancy defects Ti 2 CO 2 is NM metal and ferromagnetic (FM) metal. The transition metal (TM) doped MXenes fulfill FM Stoner criterion. The V- and Co-doped MXenes are metals, whereas Cr- and Mn-doped are half-metal and semiconductor.

2D magnetism↗