Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Development of a vacuum compatible rotary dynamic seal for cryogenic liquids

Liquid nitrogen is commonly circulating through radiative panels which cover satellite supporting structure inside thermal vacuum test chamber. In the Large Space Simulator (LSS) located in the ESA* ESTEC** Test Centre, there is the need to move the satellite specimen inside the vacuum chamber to modify its relative orientation vis-à-vis the artificial sun beam. Re-orientation of the radiative panels is then required. ESA is currently developing a New Motion System (NMS) allowing dynamic motion from Gimbal to the Yoke Stand without any reconfiguration of the test. To do so, a nitrogen supply is required which can follow the rotation of the thermal shrouds under vacuum. Nitrogen flexible hoses are not anymore suitable due to their volume and mass constraints and due to the limitation in the rotation range. This paper describes the design, manufacturing and tests of a new compact multi-turn Rotary Nitrogen Joint (RNJ) compliant with thermal vacuum conditions used for spacecraft thermal testing. This prototype development is funded by the ESA Technology and Research Program. *European Space Agency **European Space Research and Technology Centre.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Benchmark calculations on the lowest-energy singlet, triplet, and quintet states of the four-electron harmonium atom

For a wide range of confinement strengths ω, explicitly-correlated calculations afford approximate energies E(ω) of the ground and low-lying excited states of the four-electron harmonium atom that are within few μhartree of the exact values, the errors in the respective energy components being only slightly higher. This level of accuracy constitutes an improvement of several orders of magnitude over the previously published data, establishing a set of benchmarks for stringent calibration and testing of approximate electronic structure methods. Its usefulness is further enhanced by the construction of differentiable approximants that allow for accurate computation of E(ω) and its components for arbitrary values of ω. The diversity of the electronic states in question, which involve both single- and multideterminantal first-order wavefunctions, and the availability of the relevant natural spinorbitals and their occupation numbers make the present results particularly useful in research on approximate density-matrix functionals. The four-electron harmonium atom is found to possess the {sup 3}P{sub +} triplet ground state at strong confinements and the {sup 5}S{sub −} quintet ground state at the weak ones, the energy crossing occurring at ω ≈ 0.0240919.

74 ATOMIC AND MOLECULAR PHYSICS↗

Study on the characteristics of a two gap capillary discharge

The paper presents a new two-gap capillary (TGC) discharge structure. The prominent innovation is the introduction of the middle electrode, which divides the capillary into the trigger gap and the main gap. The discharge circuit of the TGC comprises the trigger circuit and the main circuit. The two circuits are used for the pre-ionization of the trigger gap and providing energy of 450 J for the main gap arc discharging, respectively. When the discharge initiates, the trigger gap is pre-ionized under high voltage pulse produced by trigger circuit, and meanwhile, the weakly ionized plasma is generated. The main circuit then maintains the expansion of the plasma, which is called soft capillary discharge. Afterwards, the main gap is shorted and discharges under a relatively low voltage. With the optimization of the circuit parameter, both the energy deposition ratio in main gap and the degree of plasma ionization are enhanced. The efficiency of the energy deposition is almost twice higher compared with that of the conventional capillary structure. The life performance test indicates that the erosion of the middle electrode and the trigger gap carbonization are the key factors that limit the life performance of the TGC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nitrogen ion implantation into various materials using 28 GHz electron cyclotron resonance ion source

The installation of the 28 GHz electron cyclotron resonance ion source (ECRIS) ion implantation beamline was recently completed at the Korea Basic Science Institute. The apparatus contains a beam monitoring system and a sample holder for the ion implantation process. The new implantation system can function as a multipurpose tool since it can implant a variety of ions, ranging hydrogen to uranium, into different materials with precise control and with implantation areas as large as 1–10 mm{sup 2}. The implantation chamber was designed to measure the beam properties with a diagnostic system as well as to perform ion implantation with an in situ system including a mass spectrometer. This advanced implantation system can be employed in novel applications, including the production of a variety of new materials such as metals, polymers, and ceramics and the irradiation testing and fabrication of structural and functional materials to be used in future nuclear fusion reactors. In this investigation, the first nitrogen ion implantation experiments were conducted using the new system. The 28 GHz ECRIS implanted low-energy, multi-charged nitrogen ions into copper, zinc, and cobalt substrates, and the ion implantation depth profiles were obtained. SRIM 2013 code was used to calculate the profiles under identical conditions, and the experimental and simulation results are presented and compared in this report. The depths and ranges of the ion distributions in the experimental and simulation results agree closely and demonstrate that the new system will enable the treatment of various substrates for advanced materials research.

36 MATERIALS SCIENCE↗

Quantitative spectromicroscopy from inelastically scattered photoelectrons in the hard X-ray range

We demonstrate quantitative, highly bulk-sensitive x-ray photoelectron emission microscopy by analysis of inelastically scattered photoelectrons in the hard X-ray range, enabling elemental depth distribution analysis in deeply buried layers. We show results on patterned structures used in electrical testing of high electron mobility power transistor devices with an epitaxial Al{sub 0.25}Ga{sub 0.75}N channel and a Ti/Al metal contact. From the image series taken over an energy range of up to 120 eV in the Ti 1s loss feature region and over a typical 100 μm field of view, one can accurately retrieve, using background analysis together with an optimized scattering cross-section, the Ti depth distribution from 14 nm up to 25 nm below the surface. The method paves the way to multi-elemental, bulk-sensitive 3D imaging and investigation of phenomena at deeply buried interfaces and microscopic scales by photoemission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of electrode material on characteristics of non-volatile resistive memory consisting of Ag{sub 2}S nanoparticles

In this study, Ag{sub 2}S nanoparticles are synthesized and used as the active material for two-terminal resistance switching memory devices. Sintered Ag{sub 2}S films are successfully crystallized on plastic substrates with synthesized Ag{sub 2}S nanoparticles, after a relatively low-temperature sintering process (200 °C). After the sintering process, the crystallite size is increased from 6.8 nm to 80.3 nm. The high ratio of surface atoms to inner atoms of nanoparticles reduces the melting point temperature, deciding the sintering process temperature. In order to investigate the resistance switching characteristics, metal/Ag{sub 2}S/metal structures are fabricated and tested. The effect of the electrode material on the non-volatile resistive memory characteristics is studied. The bottom electrochemically inert materials, such as Au and Pt, were critical for maintaining stable memory characteristics. By using Au and Pt inert bottom electrodes, we are able to significantly improve the memory endurance and retention to more than 10{sup 3} cycles and 10{sup 4} sec, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development and experimental evaluation of new building air leakage measurement methods: measurement of interior air leaks and comparison to conventional methods

Building air leaks (both through exterior and interior surfaces) can have a significant impact on energy consumption, indoor air quality, fire safety, and moisture accumulation affecting structural durability. Blower door testing has been used to measure leaks in buildings, but commonly used testing methods do not directly measure interior leaks. In this paper, new testing methods (guarded interior test and zonal multipoint pressure testing method) are presented that directly measure these interior leaks, utilizing common blower door equipment for both single and multi-point testing. Furthermore, these new methods are compared to conventional methods in terms of the information provided, limitations and time/effort needed. In addition, building leak measurement results are analyzed to reveal a) coupling between power law model values (exponent and coefficient) for an ensemble of buildings, b) the error in using single point testing when estimating low pressure leakage, and c) how building power law models vary from low to high pressure ranges.

99 GENERAL AND MISCELLANEOUS↗

Efficient algorithm for locating and sizing series compensation devices in large power transmission grids: I. Model implementation

We explore optimization methods for planning the placement, sizing and operations of Flexible Alternating Current Transmission System (FACTS) devices installed to relieve transmission grid congestion. We limit our selection of FACTS devices to Series Compensation (SC) devices that can be represented by modification of the inductance of transmission lines. Our master optimization problem minimizes the l 1 norm of the inductance modification subject to the usual line thermal-limit constraints. We develop heuristics that reduce this non-convex optimization to a succession of Linear Programs (LP) which are accelerated further using cutting plane methods. The algorithm solves an instance of the MatPower Polish Grid model (3299 lines and 2746 nodes) in 40 seconds per iteration on a standard laptop—a speed up that allows the sizing and placement of a family of SC devices to correct a large set of anticipated congestions. We observe that our algorithm finds feasible solutions that are always sparse, i.e., SC devices are placed on only a few lines. In a companion manuscript, we demonstrate our approach on realistically-sized networks that suffer congestion from a range of causes including generator retirement. In this manuscript, we focus on the development of our approach, investigate its structure on a small test system subject to congestion from uniform load growth, and demonstrate computational efficiency on a realistically-sized network.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Flat tree-level inflationary potentials in the light of cosmic microwave background and large scale structure data

We use cosmic microwave background (CMB) and large scale structure (LSS) data to test a broad and physically well-motivated class of inflationary models: those with flat tree-level potentials (typical in supersymmetry). The non-trivial features of the potential arise from radiative corrections which give a simple logarithmic dependence on the inflaton field, making the models very predictive. We also consider a modified scenario with new physics beyond a certain high energy cut-off showing up as non-renormalizable operators (NRO) in the inflaton field. We find that both kinds of models fit CMB and LSS data remarkably well, with very few free parameters. Besides, many of these models naturally predict a reasonable number of e-folds. A robust feature of these scenarios is the smallness of tensor perturbations (r{approx}<10{sup -3}). The NRO case can give a sizable running of the spectral index while achieving a sufficient number of e-folds. We use Bayesian model comparison tools to assess the relative performance of the models. We believe that these scenarios can be considered as a standard physical class of inflationary models, on a similar footing to monomial potentials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Higher moments of primordial non-Gaussianity and N-body simulations

We perform cosmological N-body simulations with non-Gaussian initial conditions generated from two independent fields. The dominant contribution to the perturbations comes from a purely Gaussian field, but we allow the second field to have local non-Gaussianity that need not be weak. This scenario allows us to adjust the relative importance of non-Gaussian contributions beyond the skewness, producing a scaling of the higher moments different from (and stronger than) the scaling in the usual single field local ansatz. We compare semi-analytic prescriptions for the non-Gaussian mass function, large scale halo bias, and stochastic bias against the simulation results. We discuss applications of this work to large scale structure measurements that can test a wider range of models for the primordial fluctuations than is usually explored.

79 ASTRONOMY AND ASTROPHYSICS↗

The EBLM project – IX. Five fully convective M-dwarfs, precisely measured with CHEOPS and TESS light curves

ABSTRACT Eclipsing binaries are important benchmark objects to test and calibrate stellar structure and evolution models. This is especially true for binaries with a fully convective M-dwarf component for which direct measurements of these stars’ masses and radii are difficult using other techniques. Within the potential of M-dwarfs to be exoplanet host stars, the accuracy of theoretical predictions of their radius and effective temperature as a function of their mass is an active topic of discussion. Not only the parameters of transiting exoplanets but also the success of future atmospheric characterization relies on accurate theoretical predictions. We present the analysis of five eclipsing binaries with low-mass stellar companions out of a subsample of 23, for which we obtained ultra-high-precision light curves using the CHEOPS satellite. The observation of their primary and secondary eclipses are combined with spectroscopic measurements to precisely model the primary parameters and derive the M-dwarfs mass, radius, surface gravity, and effective temperature estimates using the PYCHEOPS data analysis software. Combining these results to the same set of parameters derived from TESS light curves, we find very good agreement (better than 1 per cent for radius and better than 0.2 per cent for surface gravity). We also analyse the importance of precise orbits from radial velocity measurements and find them to be crucial to derive M-dwarf radii in a regime below 5 per cent accuracy. These results add five valuable data points to the mass–radius diagram of fully convective M-dwarfs.

Sebastian, D. (ORCID:0000000222149258)↗

The extended Baryon Oscillation Spectroscopic Survey: testing a new approach to measure the evolution of the structure growth

We report that the extended Baryon Oscillation Spectroscopic Survey (eBOSS) is one of the first of a new generation of galaxy redshift surveys that will cover a large range in redshift with sufficient resolution to measure the baryon acoustic oscillations signal. For surveys covering a large redshift range we can no longer ignore cosmological evolution, meaning that either the redshift shells analysed have to be significantly narrower than the survey, or we have to allow for the averaging over evolving quantities. Both of these have the potential to remove signal: analysing small volumes increases the size of the Fourier window function, reducing the large-scale information, while averaging over evolving quantities can, if not performed carefully, remove differential information. It will be important to measure cosmological evolution from these surveys to explore and discriminate between models. We apply a method to optimally extract this differential information to mock catalogues designed to mimic the eBOSS quasar sample. By applying a set of weights to extract redshift-space distortion measurements as a function of redshift, we demonstrate an analysis that does not invoke the problems discussed above. Finally, we show that our estimator gives unbiased constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

Attachment site recognition and regulation of directionality by the serine integrases

Serine integrases catalyze the integration of bacteriophage DNA into a host genome by site-specific recombination between ‘attachment sites’ in the phage ( attP ) and the host ( attB ). The reaction is highly directional; the reverse excision reaction between the product attL and attR sites does not occur in the absence of a phage-encoded factor, nor does recombination occur between other pairings of attachment sites. A mechanistic understanding of how these enzymes achieve site-selectivity and directionality has been limited by a lack of structural models. Here, we report the structure of the C-terminal domains of a serine integrase bound to an attP DNA half-site. The structure leads directly to models for understanding how the integrase-bound attP and attB sites differ, why these enzymes preferentially form attP × attB synaptic complexes to initiate recombination, and how attL × attR recombination is prevented. In these models, different domain organizations on attP vs. attB half-sites allow attachment-site specific interactions to form between integrase subunits via an unusual protruding coiled-coil motif. These interactions are used to preferentially synapse integrase-bound attP and attB and inhibit synapsis of integrase-bound attL and attR . The results provide a structural framework for understanding, testing and engineering serine integrase function.

59 BASIC BIOLOGICAL SCIENCES↗

X-ray imaging of vortex cores in confined magnetic structures

Cores of magnetic vortices in micron-sized NiFe disk structures, with thicknesses between 150 and 50 nm, were imaged and analyzed by high-resolution magnetic soft x-ray microscopy. A decrease of the vortex-core radius was observed from approximately 38 to 18 nm with decreasing disk thickness. By comparing with full three-dimensional micromagnetic simulations showing the well-known barrel structure, we obtained excellent agreement, taking into account instrumental broadening and a small perpendicular anisotropy. The proven magnetic spatial resolution of better than 25 nm was sufficient to identify a negative dip close to the vortex core, originating from stray fields of the core. Magnetic vortex structures can serve as test objects for evaluating sensitivity and spatial resolution of advanced magnetic microscopy techniques.

36 MATERIALS SCIENCE↗

Neutron star cooling: A challenge to the nuclear mean field

The two recent density-dependent versions of the finite-range M3Y interaction (CDM3Yn and M3Y-Pn) have been probed against the bulk properties of asymmetric nuclear matter (NM) in the nonrelativistic Hartree-Fock (HF) formalism. The same HF study has also been done with the famous Skyrme (SLy4) and Gogny (D1S and D1N) interactions that were well tested in the nuclear structure calculations. Our HF results are compared with those given by other many-body calculations like the Dirac-Brueckner Hartree-Fock approach or ab initio variational calculations using free nucleon-nucleon interaction and by both the nonrelativistic and relativistic mean-field studies using different model parameters. Although the two considered density-dependent versions of the M3Y interaction were proven to be quite realistic in the nuclear structure or reaction studies, they give two distinct behaviors of the NM symmetry energy at high densities, like the Asy-soft and Asy-stiff scenarios found earlier with other mean-field interactions. As a consequence, we obtain two different behaviors of the proton fraction in the {beta}-equilibrium that in turn can imply two drastically different mechanisms for the neutron star cooling. While some preference of the Asy-stiff scenario was found based on predictions of the latest microscopic many-body calculations or empirical NM pressure and isospin diffusion data deduced from heavy-ion collisions, a consistent mean-field description of nuclear structure database is more often given by some Asy-soft type interaction like the Gogny or M3Y-Pn ones. Such a dilemma poses an interesting challenge to the modern mean-field approaches.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗