Search NASA⌕ Search

SEARCH · Search NASA

Results for “substrate interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Dissecting the Division of Labor in Microbial Consortia for the Production of Biofuels and Chemicals (Final Technical Report)

The overarching objective of this project is to elucidate the fundamental design rules for microbial division of labor (DOL), the core of ecosystem organization, in the context of artificial yeast—lactic acid bacteria consortia that produce advanced biofuel and chemical from cellulosic biomass. Over the course of four years, we have successfully achieved the objective through three lines of research that combines experiment with mathematical modeling. Specifically, we have shown that compositional and temporal DOL is effective in modulating mixed sugar fermentation by an engineered consortium and uncovered general quantitative criteria for conditions under which microbial DOL outperforms single superbugs for simultaneous utilization of mixed substrates. We also demonstrated, in synthetic consortia of yeast and lactic acid bacteria, that partitioning the labor for substrate breakdown and end-product synthesis can allow an efficient production of 2-butanol that is difficult otherwise for a single yeast strain. Additionally, by systematically probing the stability of an engineered cooperative consortium, we found that the stability of microbial symbiosis is governed by the topological structure of the underlying cellular interactions rather than specific microbial species and that rational modulation of the interactions may facilitate the restoration of collapsed consortia as well as the intervention of target communities. Together, this project has advanced the fundamental knowledge of microbial DOL in terms of its strength in mixed substrate fermentation, production of complex chemicals, and ecological system stability in the context of microbial consortia. It also provides valuable insights into the design, construction and optimization of artificial consortia for the utilization of cellulosic biomass and economic production of biofuel and chemicals.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Area-selective atomic layer deposition enabled by competitive adsorption

In this work, we investigate the atomic layer deposition (ALD) of ZrO2 thin films on Cu and SiO2 substrates, using Zr[N(C2H5CH3)]4 as the thin-film precursor, and H2O or O2 as the coreactants. Here, we introduce 3-hexyne as a coadsorbate molecule during the thin-film precursor half-cycle and examine its effect on the selectivity of growth. We find that 3-hexyne strongly inhibits growth on Cu, while having essentially no effect on the growth on SiO2. Calculations using dispersion-inclusive density functional theory verify that 3-hexyne undergoes sp → sp2 rehybridization on Cu, which results in strong chemisorption on the metal surface, while only binding weakly to SiO2 via nonbonded van der Waals/dispersion interactions. After 10 cycles of ALD using 3-hexyne as the coadsorbate, we observed the deposition of ∼1.5 nm of ZrO2 on SiO2. On a Cu substrate, we only detected <0.15 nm of ZrO2 after the same number of cycles of ALD. At this point in the process, we find evidence of the formation of cuprous oxide (Cu2O) from in situ x-ray photoelectron spectroscopy and a significant increase in the roughness of the Cu substrate. We conclude that both factors likely contribute to the loss of selectivity due to the formation of sites (e.g., Cu2O) that bind 3-hexyne less strongly and/or an increase in the density of highly reactive sites (e.g., steps, kinks) that promote dissociative chemisorption of the thin-film precursor.

Suh, Taewon (ORCID:0000000163823811)↗
DOE OSTI2025

Illuminating the Role of Alcohol Substrate in Nickel Photoredox Catalysis via Ground State and Transient Absorption Spectroscopy

Direct excitation of nickel photocatalysts has gained popularity over the last several years following the successful activation of nickel by Ir and Ru photosensitizers. The ability to pair these photosensitizers with Ni catalysts facilitates the formation of crucial chemical bonds under relatively mild conditions. However, there are still gaps in our understanding of what influences the performance of these Ni photocatalysts. Previous work from our group identified a nickel photocatalyst supported by a tridentate pyridinophane ligand that undergoes wavelength-dependent cross-coupling reactivity. Herein, we report detailed studies of the wavelength dependence of the C–O cross-coupling reactivity, illustrating that the catalytic activity has an optimal wavelength, and excitation on both the blue and red sides of this optimal wavelength leads to a reduction in product yield. We also reveal a crucial catalyst-alcohol preirradiation interaction that drastically alters the catalyst’s optical properties. Furthermore, we investigate both wavelength dependency and alcohol dependency via optical transient absorption spectroscopy and reveal a substrate binding process responsible for the observed wavelength-dependent cross-coupling catalysis.

alcohol↗
DOE OSTI2016

A COMPREHENSIVE STUDY OF HYDROGEN ADSORBING TO AMORPHOUS WATER ICE: DEFINING ADSORPTION IN CLASSICAL MOLECULAR DYNAMICS

Gas–grain and gas–phase reactions dominate the formation of molecules in the interstellar medium (ISM). Gas–grain reactions require a substrate (e.g., a dust or ice grain) on which the reaction is able to occur. The formation of molecular hydrogen (H{sub 2}) in the ISM is the prototypical example of a gas–grain reaction. In these reactions, an atom of hydrogen will strike a surface, stick to it, and diffuse across it. When it encounters another adsorbed hydrogen atom, the two can react to form molecular hydrogen and then be ejected from the surface by the energy released in the reaction. We perform in-depth classical molecular dynamics simulations of hydrogen atoms interacting with an amorphous water-ice surface. This study focuses on the first step in the formation process; the sticking of the hydrogen atom to the substrate. We find that careful attention must be paid in dealing with the ambiguities in defining a sticking event. The technical definition of a sticking event will affect the computed sticking probabilities and coefficients. Here, using our new definition of a sticking event, we report sticking probabilities and sticking coefficients for nine different incident kinetic energies of hydrogen atoms [5–400 K] across seven different temperatures of dust grains [10–70 K]. We find that probabilities and coefficients vary both as a function of grain temperature and incident kinetic energy over the range of 0.99–0.22.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Carbon-dependent chromate toxicity mechanism in an environmental Arthrobacter isolate

Arthrobacter spp. are widespread in soil systems and well-known for their Cr(VI) reduction capabilities making them attractive candidates for in situ bioremediation efforts. Cellulose drives carbon flow in soil systems; yet, most laboratory studies evaluate Arthrobacter-Cr(VI) interactions solely with nutrient-rich media or glucose. This work aims to determine how various cellulose degradation products and biostimulation substrates influence Cr(VI) toxicity, reduction, and microbial growth of an environmental Arthrobacter sp. isolate. Laboratory culture-based studies suggest there is a carbon-dependent Cr(VI) toxicity mechanism that affects subsequent Cr(VI) reduction by strain LLW01. Strain LLW01 could only grow in the presence of, and reduce, 50 μM Cr(VI) when glucose or lactate were provided. Compared to lactate, Cr(VI) was at least 30-fold and 10-fold more toxic when ethanol or butyrate was the sole carbon source, respectively. The addition of sulfate mitigated toxicity somewhat, but had no effect on the extent of Cr(VI) reduction. Cell viability studies indicated that a small fraction of cells were viable after 8 days suggesting cell growth and subsequent Cr(VI) reduction may resume. These results suggest when designing bioremediation strategies with Arthrobacter spp. such as strain LLW01, carbon sources such as glucose and lactate should be considered over ethanol and butyrate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

An Examination of Water-Related Melt Processes in Arctic Snow on Tundra and Sea-Ice

From April through June in 2019 and 2022, we monitored snow melt at three sites near Utqiaġvik, Alaska. Along 200-m lines we measured snow depth, density, stratigraphy, snow-covered area, and spectral albedo. Site 1 (ARM) was sloped tundra drained by water tracks. Site 2 (BEO) was flat polygonal tundra. Site 3 (ICE) was on undeformed landfast sea ice. All three sites were within a 6 km radius. Despite similar pre-melt snow distributions and weather, the melt progression differed markedly between sites. In 2019, by mid-melt, there was 40% less snow-covered area at ARM versus ICE, and 34% less snow-covered area at ARM versus BEO. The 2022 melt started 2 weeks later than in 2019 and was rapid, so smaller differences in snow-covered areas developed. In both years meltout dates varied by up to 25 days between sites, and more than 20 days within sites, with melt rates at locations only meters apart differing by up to a factor of seven. This melt diachroneity led to highly heterogeneous meltout patterns at all three sites. Our measurements and observations indicate that, in addition to reductions in snow reflective properties and wind-driven heat advection, the fate of meltwater plays a key role in producing melt diachroneity. We identify seven snow-water mechanisms that can enhance or inhibit melt rates, all largely controlled by the local topography and the nature of the substrate. These mechanisms are important because the most rapid changes in albedo coincide with the peak of water-snow melt interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Polarity governs atomic interaction through two-dimensional materials

The objective of this project is to develop two-dimensional material-based layer transfer (2DLT) for high-efficiency, low-cost III-V solar cells. More specifically, in short term, the team will develop 2DLT for cost-cost, high-throughput GaAs single-junction solar cells. The team will develop ultraclean high yield graphene transfer on GaAs and optimize the remote homoepitaxy process to obtain dislocation-free single-crystalline GaAs on graphene whose crystalline quality is identical to that of the GaAs wafer [1,2]. The team will develop the 2DLT process for a solar cell with highest achievable efficiency. The team will also strive to target GaAs solar cells with efficiency of 25~29% before and after the transfer, and reuse the substrate multiple times without CMP by damage-free transfer process enabled by 2DLT. Our team is partnered with industrial collaborators to obtain World record efficiency of flexible GaAs solar cells. Once the concept is fully realized for the GaAs solar cells, the team will expand the concept for multiple-junction solar cell targeting 35% efficiency with the 2DLT process in other projects.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Microbiomes of Velloziaceae from phosphorus-impoverished soils of the campos rupestres, a biodiversity hotspot

The rocky, seasonally-dry and nutrient-impoverished soils of the Brazilian campos rupestres impose severe growth-limiting conditions on plants. Species of a dominant plant family, Velloziaceae , are highly specialized to low-nutrient conditions and seasonal water availability of this environment, where phosphorus (P) is the key limiting nutrient. Despite plant-microbe associations playing critical roles in stressful ecosystems, the contribution of these interactions in the campos rupestres remains poorly studied. Here we present the first microbiome data of Velloziaceae spp. thriving in contrasting substrates of campos rupestres . We assessed the microbiomes of Vellozia epidendroides , which occupies shallow patches of soil, and Barbacenia macrantha , growing on exposed rocks. The prokaryotic and fungal profiles were assessed by rRNA barcode sequencing of epiphytic and endophytic compartments of roots, stems, leaves and surrounding soil/rocks. We also generated root and substrate (rock/soil)-associated metagenomes of each plant species. We foresee that these data will contribute to decipher how the microbiome contributes to plant functioning in the campos rupestres , and to unravel new strategies for improved crop productivity in stressful environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Electrical and Optical Characteristics of Si-Nanoparticle Films Deposited onto Substrates by High-Voltage Electrospraying from Ethanol Sols

The optical and electrical characteristics of films consisting of nanocrystalline silicon (nc-Si) deposited onto substrates by the high-voltage electrospraying of nc-Si sols in ethanol are investigated. It is found that the interaction of ethanol droplets carrying Si nanoparticles with a corona-discharge electric field leads to the polymerization of ethanol and the formation of a polymer layer on the Si-nanoparticle surface. A high-voltage facility for depositing the films using an additional focusing electrode allows one to change the geometry of the electric field and intensity in the region of the ethanol droplet flow. As a result, nc-Si films with qualitatively different properties of the polymer on the nanoparticle surface are formed, specifically, nc-Si-A and nc-Si-B, obtained without a focusing electrode and with it, respectively. Upon annealing at temperatures of up to 400°С, the optical band gap E{sub g} of the nc-Si-A films increases from ~1.9 to ~2.2 eV, while the E{sub g} value of the nc-Si-B films remains constant and amounts to 1.85 eV. The constant E{sub g} value of the nc-Si-B films is explained by the properties of the polymer on the Si-nanoparticle surface and the more effective blocking of oxygen penetration from the surrounding environment upon annealing at temperatures of up to 400°C than in the case of a polymer in nc-Si-A films. The temperature dependences of the dark and photoinduced conductivity of nc-Si-A films are approximated with good accuracy by two activation-type exponential functions and the dark activation energies are ~0.75 and 0.1 eV, respectively. The conductivity of the nc-Si-A films noticeably decreases under irradiation of the samples at wavelengths of 460–470 nm. The temperature dependences of the conductivity of the nc-Si-B films are approximated with good accuracy by exponential functions with activation energies of 0.73 (in the dark) and 0.59 eV (under photoexcitation). In contrast to the case of nc-Si-A films, the photoconductivity of nc-Si-B films grows more than fourfold relative to the dark conductivity under analogous illumination. The nc-Si-B films are photoactive and sandwich-like Al/nc-Si-B/Al structures can generate a voltage. The dark conductivity and photoconductivity of the nc-Si-A films in the voltage range of V > 2 V are determined by the two-center Poole–Frenkel effect; the concentration of the centers affecting the Poole–Frenkel conductivity is ~3 × 10{sup 17} cm{sup –3}. In nc-Si-B films in the voltage range of 2–5 V, electron transport is determined by space-charge-limited currents and, at high voltages, by the two-center Poole–Frenkel effect. The concentration of traps contributing to the space-charge-limited currents is ~4 × 10{sup 16} cm{sup –3}. The concentration of Poole–Frenkel centers affecting the conductivity decreases according to the activation law with an activation energy of 0.7 eV from 3 × 10{sup 16} to 2 × 10{sup 14} cm{sup –3} with a decrease in temperature from 120°C to 40°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1976

Design automation for complex CMOS/SOS LSI hybrid substrates

A design automated approach used to develop thick-film hybrid packages is described. The hybrid packages produced combine thick-film and silicon on sapphire (SOS) laser surface interaction technologies to bring the on-chip performance level of SOS to the subsystem level. Packing densities are improved by a factor of eight over ceramic dual in-line packing; interchip wiring capacitance is low. Due to significant time savings, the design automated approach presented can be expected to yield a 3:1 reduction in cost over the use of manual methods for the initial design of a hybrid.

Ramondetta, P. W.↗
NASA NTRS1980

Blanket technology workshop report

The solar array blanket, defined as a substrate covered with interconnected and glassed solar cells, but excluding the necessary support structure, deployment, and orientation devices is considered. The interactions between the blanket and the structure that is used to package, deploy, support and, if necessary restow it, are addressed along with systems constraints such as spacecraft configuration, size, and payload requirements. The influence on blanket design is emphasized. The three main mission classes considered are low Earth orbital (LEO), intermediate, or LEO to GEO transfer, and geosynchronous (GEO). Although interplanetary missions could be considered to be a separate class, their requirements, primarily power per unit mass, are generally close enough to geosynchronous missions to allow this mission class to be included within the third type. Examination of the critical elements of each class coupled with considerations of the shuttle capabilities is used to define the type of blanket technology most likely required to support missions that will be flown starting in 1990.

Scott-Monck, J. A.↗
NASA NTRS1991

Microwave properties of high transition temperature superconducting thin films

Extensive studies of the interaction of microwaves with YBa2Cu3O(7-delta), Bi-based, and Tl-based superconducting thin films deposited in several microwave substrates were performed. The data were obtained by measuring the microwave power transmitted through the film in the normal and the superconducting state and by resonant cavity techniques. The main motives were to qualify and understand the physical parameters such as the magnetic penetration depth, the complex conductivity, and the surface impedance, of high temperature superconducting (HTS) materials at microwave frequencies. Based on these parameters, the suitability of these HTS thin films is discussed for microwave applications.

Gordon, W. L.↗
DOE OSTI2017

Radioactive Contamination Tenacity on Building Substrate – 17417

Radiological decontamination is an essential enterprise that has become more important over the last four decades due to unfortunate accidents and the threat of terrorist actions. Decontamination can be an effective, beneficial alternative for the cleanup of radiological contamination events; however, the costs and benefits need to be balanced against those for complete removal and demolition of contaminated areas or facilities. Demolition and removal are often the first options considered in such circumstances as decontamination may be thought of as slow and costly. Decontamination has advantages, including significant waste reduction over demolition. In areas with buildings of cultural or societal importance, demolition may not be an option. Three decontamination evaluation test series are the focus of this article: SIMCON 1 and 2 (i.e., simulated contamination), and Urban RDD (radiological dispersal device, i.e., a dirty bomb detonation). These test series revealed that different contaminants respond differently during decontamination. This was found to be true with both SIMCON and Urban RDD simulant tests. SIMCON 2 especially demonstrated that chemically different contaminants respond differently to different decontamination methods: cesium appears to be less tenacious (more easily removed) than zirconium using chemical methods. These differences were underscored by the Urban RDD tests where americium and cobalt tended to precipitate on high pH surfaces (such as concrete), making them easier to remove, while cesium and strontium were essentially unaffected by surface pH and were imbibed more strongly into the substrate pore structure. While authorities argue over the contributions of contaminant chemistry and substrate morphology, the clear answer is that each has a contribution to the tenacity of a contaminant. Knowing how these characteristics interact will make us better at decontamination in the field. This knowledge refutes the efforts of perhaps well-meaning marketers to define our decontamination problems by what products they are trying to sell; often a “one size fits all” type approach. Knowing even a little bit about the character of the decontamination problem will save time and money and increase the efficacy of decontamination.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Radioactive Contamination Tenacity on Building Substrate - 17417

Radiological decontamination is an essential enterprise that has become more important over the last four decades due to unfortunate accidents and the threat of terrorist actions. Decontamination can be an effective, beneficial alternative for the cleanup of radiological contamination events; however, the costs and benefits need to be balanced against those for complete removal and demolition of contaminated areas or facilities. Demolition and removal are often the first options considered in such circumstances as decontamination may be thought of as slow and costly. Decontamination has advantages, including significant waste reduction over demolition. In areas with buildings of cultural or societal importance, demolition may not be an option. Three decontamination evaluation test series are the focus of this article: SIMCON 1 and 2 (i.e., simulated contamination), and Urban RDD (radiological dispersal device, i.e., a dirty bomb detonation). These test series revealed that different contaminants respond differently during decontamination. This was found to be true with both SIMCON and Urban RDD simulant tests. SIMCON 2 especially demonstrated that chemically different contaminants respond differently to different decontamination methods: cesium appears to be less tenacious (more easily removed) than zirconium using chemical methods. These differences were underscored by the Urban RDD tests where americium and cobalt tended to precipitate on high pH surfaces (such as concrete), making them easier to remove, while cesium and strontium were essentially unaffected by surface pH and were imbibed more strongly into the substrate pore structure. While authorities argue over the contributions of contaminant chemistry and substrate morphology, the clear answer is that each has a contribution to the tenacity of a contaminant. Knowing how these characteristics interact will make us better at decontamination in the field. This knowledge refutes the efforts of perhaps well-meaning marketers to define our decontamination problems by what products they are trying to sell; often a 'one size fits all' type approach. Knowing even a little bit about the character of the decontamination problem will save time and money and increase the efficacy of decontamination. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

B-family subunits of protein phosphatase 2A are necessary for pollen development but not for female gametophyte development in Arabidopsis

Highlights: • A knockout of PP2A B-family subunit genes causes pollen lethality in Arabidopsis. • The knockout decreased pollen enzyme activities and pollen germination rates. • The Arabidopsis B-family subunits physically interact with a PP2A A subunit. Protein phosphatase 2A (PP2A) is a heterotrimeric protein complex conserved among eukaryotes. The B subunit of PP2A determines the substrate specificity of the PP2A holoenzyme, and is classified into the B, B′, B″ and B‴ families. Arabidopsis thaliana has two isoforms of the B-family subunit (ATBA and ATBB). A double knockout of their genes is lethal, but which developmental process is primarily impaired by the double knockout is unclear. Identifying such a process helps understand PP2A-mediated signaling more deeply. Here, genetic characterization of new knockout mutants for these genes shows that they are necessary for pollen development but not for female gametophyte development. Compared to wild-type pollen grains, the mutant pollen grains exhibited lower enzyme activities, germinated less frequently on stigmas, and exhibited the aberrant numbers of sperm cell nuclei, suggesting that ATBA and ATBB play pleiotropic roles in pollen development. The amino acids stabilizing the interaction between the human PP2A A and B-family subunits are conserved in an Arabidopsis A subunit (AtPP2AA2), ATBA and ATBB. His-tagged AtPP2AA2 co-immunoprecipitated with either Myc-tagged ATBA or Myc-tagged ATBB in vitro, confirming their interactions. Proteins that regulate pollen development and that undergo dephosphorylation are likely primary targets of ATBA and ATBB.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Visualizing Size-Dependent Dynamics of CeO 2-δ {100}-Supported CoO x Nanoparticles Under CO 2 Hydrogenation Conditions

Carbon dioxide is a major greenhouse gas. In order to optimize processes focused on its chemical valorization, one needs detailed information about the effects of CO 2 and/or CO 2 /H 2 mixtures on the structure and morphology of metal/oxide catalysts. Here, in this study, the evolution of a catalyst with cobalt supported on CeO 2 -cube nanostructures under CO 2 hydrogenation conditions was investigated by using a set of in situ characterization techniques (X-ray absorption fine structure, X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, and environmental transmission electron microscopy (TEM)). The {100} facets of the ceria support displayed an unexpectedly high stability due to strong interactions with the aggregates of cobalt oxide. A significant influence of interfacial bonding between CoO x and CeO 2-δ {100} is evident through a clear preference in the orientation of CoO x nanoparticles (NPs) with respect to the substrate. For initially reduced Co/CeO 2 -cube nanostructures, a kinetically controlled oxidation of cobalt upon the introduction of CO 2 was observed during the early stages of CO 2 hydrogenation. Environmental TEM revealed the size-dependent morphological behavior of cobalt oxide NPs due to strong interactions with the CeO 2 {100} surface. When the environment was switched from H 2 to a mixture of H 2 and CO 2 at 250 °C, small CoO x NPs (in the largest dimension < 2.5 nm) rapidly transformed from a pyramidal three-dimensional (3D) form to a planar, monatomic layer attached to the concurrently oxidized CeO 2-δ {100} surface. This maximizes the number of sites available for the binding of CO 2 or reaction intermediates. The shape transformation reflected the oxophilic character of cobalt and strong metal–support interactions. The removal of CO 2 from the gas phase led to a reduction of the cobalt oxide NPs by hydrogen and a reversible two-dimensional → 3D transformation. In contrast, no significant morphological changes, apart from further oxidation, were observed for big CoO x NPs (in the largest dimension > 3 nm). These trends are not seen for nanoparticles of noble metals. The observed morphological and structural changes in the small CoO x NPs affected the stability of reaction intermediates and modified the selectivity of the CoO x /CeO 2 catalyst system for methane production.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A topological superconductor tuned by electronic correlations

A topological superconductor, characterized by either a chiral order parameter or a topological surface state in proximity to bulk superconductivity, is foundational to topological quantum computing. A key open challenge is whether electron-electron interactions can tune such topological superconducting phases. Here, we provide experimental signatures of a unique topological superconducting phase in competition with electronic correlations in 10-unit-cell thick FeTe x Se 1-x films grown on SrTiO 3 substrates. When the Te content x exceeds 0.7, we observe a topological transition marked by the emergence of a superconducting surface state. Near the FeTe limit, the system undergoes another transition where the surface state disappears, and superconductivity is suppressed. Theory suggests that electron-electron interactions in the odd-parity xy− band drives this second topological transition. The flattening and eventual decoherence of d xy -derived bands track the superconducting dome, linking correlation effects directly to superconducting coherent transport. Our work establishes many-body electronic correlations as a sensitive knob for tuning topology and superconductivity, offering a pathway to engineer new topological phases in correlated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Weak interactions between water and clathrate-forming gases at low pressures

Using scanning probe microscopy and temperature programed desorption we examined the interaction between water and two common clathrate-forming gases, methane and isobutane, at low temperature and low pressure. Water co-deposited with up to 10-1 mbar methane or 10-5 mbar isobutane at 140 K onto a Pt(111) substrate yielded pure crystalline ice, i.e., the exposure to up to ~107 gas molecules for each deposited water molecule did not have any detectable effect on the growing films. Exposing metastable, less than 2 molecular layers thick, water films to 10-5 mbar methane does not alter their morphology, suggesting that the presence of the Pt(111) surface is not a strong driver for hydrate formation. This weak water-gas interaction at low pressures is supported by our thermal desorption measurements from amorphous solid water and crystalline ice where 1 ML of methane desorbs near ~43 K and isobutane desorbs near ~100 K. Similar desorption temperatures were observed for desorption from amorphous solid water.

Clathrates↗