Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Enhanced dielectric, impedance and magnetic characteristics of Co doped multiferroic Bi{sub 2}Fe{sub 4}O{sub 9}

Multiferroic Bi{sub 2}Fe{sub 4(1-x)}Co{sub 4x}O{sub 9} (x = 0, 0.05) were prepared by conventional solid state reaction route. X-ray diffraction (XRD) result indicated the decrease in lattice parameters due to 5% Co doping. Grain growth in the doped composition was confirmed from surface morphology characterization. Frequency dependent real part of dielectric constant (ε′) at room temperature showed an enhancement of ~70% in doped sample at 1 kHz. A decrease in peak height with doping was noticed from the modulus study. Lastly, room temperature M-H measurement upto 9 T showed induced ferromagnetism in Bi{sub 2}Fe{sub 4}O{sub 9} due to 5% Co doping. The values of remnant magnetization (M{sub r}) and coercive field (H{sub c}) in Bi{sub 2}Fe{sub 3.8}Co{sub 0.2}O{sub 9} was found to be 0.007 µ{sub B}/f.u. and 0.295 kOe respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Voltammetric and impedance behaviours of surface-treated nano-crystalline diamond film electrodes

The electrochemical performances of hydrogen- and oxygen-terminated nano-crystalline diamond film electrodes were investigated by cyclic voltammetry and AC impedance spectroscopy. In addition, the surface morphologies, phase structures, and chemical states of the two diamond films were analysed by scanning probe microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy, respectively. The results indicated that the potential window is narrower for the hydrogen-terminated nano-crystalline diamond film than for the oxygen-terminated one. The diamond film resistance and capacitance of oxygen-terminated diamond film are much larger than those of the hydrogen-terminated diamond film, and the polarization resistances and double-layer capacitance corresponding to oxygen-terminated diamond film are both one order of magnitude larger than those corresponding to the hydrogen-terminated diamond film. The electrochemical behaviours of the two diamond film electrodes are discussed.

36 MATERIALS SCIENCE↗

Probabilistic Inference of Low-Surface-Brightness Galaxy Morphological Parameters Using Simulation-Based Inference

Low-surface-brightness galaxies (LSBGs) are diffuse, often dark-matter-dominated systems whose faintness makes their structural parameters difficult to measure reliably in wide-field imaging surveys. Robust parameter inference, including uncertainty quantification, is important for population studies and for comparisons with models of galaxy formation, as future surveys are expected to produce increasingly large samples of diffuse galaxies. In practice, LSBG profile modeling is sensitive to sky- background errors, masking choices, contaminating background sources, and the computational cost of obtaining posterior-level uncertainties for large samples. Motivated by these questions, we develop a simulation-based inference (SBI) framework for estimating posterior distributions of LSBG morphological parameters from simulated galaxy images. Using PyImfit, we generate DES-like single-Sersic profile LSBG images with known position angle, ellipticity, Sersic index, effective surface brightness, and effective radius. We then train a normalizing-flow-based neural posterior estimator using the sbi package to infer these parameters from the simulated images. For isolated simulated galaxies, the SBI posterior recovers the true input parameters, produces posterior predictive residuals consistent with the assumed noise model, and shows good empirical calibration in a DES-motivated test regime. We also compare SBI with PyImfit-based MCMC inference and find broadly comparable posterior constraints, while SBI enables substantially faster posterior sampling after training. Finally, we test robustness to compact background contaminants. A model trained only on isolated galaxies produces undercovered posteriors on contaminated images, whereas training on simulations with variable contaminant positions and fluxes improves calibration across contaminated test sets. These results demonstrate the promise of SBI for scalable, uncertainty-aware LSBG morphology inference, while emphasizing that posterior reliability strongly depends on whether training simulations include relevant observational complications.

Batbayar, Bilguun [U. Chicago (main)]↗

Influences of elevated thermal decomposition of ammonia gas on indium nitride grown by sol–gel spin coating method

Highlights: • A study on indium nitride growth via sol-gel spin coating and nitridation. • Thermal decomposition effects of ammonia gas on films properties are investigated. • Chemical processes describing InN crystal growth are revealed. • Thermal etching effect and metallic indium are observed at increasing temperature. • New insights in synthesizing InN thin films with a simple and low cost method. - Abstract: Indium nitride (InN) thin films grown on aluminum nitride on p-type silicon (111) [AlN/p-Si(111)] substrates are prepared via sol–gel spin coating method followed by nitridation. The thermal decomposition effects of ammonia (NH{sub 3}) gas on the structural properties and surface morphologies of the deposited films are investigated. X-ray diffraction results reveal that the crystalline quality of InN degrades markedly as thermal decomposition of NH{sub 3} gas increases from 700 to 850 °C, at which indium oxide (In{sub 2}O{sub 3}) forms in the deposited films. The thermal etching effect and formation of indium droplet on the film are observed at 850 °C. These findings are consistent with those of elementary and cross-sectional analysis obtained through energy dispersive spectroscopy and field-emission scanning electron microscopy. The findings deduced that InN thin films with densely packed grains can be grown at NH{sub 3} decomposition temperature of 700 °C.

36 MATERIALS SCIENCE↗

Investigation of Mixed-Type Craters and the Role of Bifluoride Additives to Produce Zirconia-Toughened Alumina-Based PEO Coating

Al{sub 2}O{sub 3}-ZrO{sub 2} composite ceramic coatings were prepared on Al6061 aluminum alloy by plasma electrolytic oxidation in Na{sub 3}PO{sub 4}-K{sub 2}ZrF{sub 6}-Na{sub 2}SiF{sub 6}-based alkaline electrolyte. Optimum processing time for the coating formation was found to be ~ 50 min. Cross section and surface morphology of the coatings were analyzed using scanning electron microscope. From the phase and elemental composition analysis, the presence of m-ZrO{sub 2} and t-ZrO{sub 2} phases was confirmed. It was further observed that the peak intensities of t-ZrO{sub 2} and α-Al{sub 2}O{sub 3} phases increased with processing time, which was attributed to the enhanced crystallinity caused by the efficient sintering conditions. Corrosion properties were investigated by potentiodynamic polarization test in 3.5 wt.% NaCl solution. The results showed high improvement in corrosion rate with minimum recorded value ~ 0.25 mmy (mm/year) and corrosion current ~ 0.15 × 10{sup −6} A/cm{sup 2}.

36 MATERIALS SCIENCE↗

Structural, optical and gas sensing properties of vertically well-aligned ZnO nanowires grown on graphene/Si substrate by thermal evaporation method

Highlights: • Vertically well-aligned ZnO NW arrays with high aspect ratio and extremely large-surface-volume ratio were synthesized on graphene/Si substrate without the aid of metal catalyst by a simple thermal evaporation. • The gas sensor based on the vertical ZnO NW arrays-graphene structure exhibited high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200oC, and could be used to detect NO{sub 2} gas at very low levels (2, 6, 10 ppm). • The excellent sensing performance is mainly because of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. • The common defects and optical properties of the ZnO NW arrays-graphene structure were studied in detail. • The possible growth mechanism of vertically well-aligned ZnO NWs on graphene and the gas-sensing mechanism of sensors were proposed. - Abstract: We report catalyst-free vertical growth of high-density ZnO nanowire (NW) arrays on Si substrate with a graphene buffer layer by thermal evaporation method. Structural, surface morphology, chemical composition and optical properties of ZnO NWs were studied by Field emission scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL) and Raman spectroscopy. The results indicate that the grown ZnO NWs are single-crystalline and exhibit the hexagonal wurtzite crystal structure with a preferred orientation along the [0001] direction; all of the ZnO NWs vertically grow on the graphene/Si substrate. The majority of the as-grown NWs have diameters in the range of 250–300 nm and length up to several tens of micrometers, whereas a small portion of NWs have a diameter of approximately of 9–12 nm. Room temperature PL spectrum of the ZnO NWs exhibits a sharp and strong ultraviolet emission at 380 nm and a weak visible emission at around 516 nm. The role of graphene buffer layer in the vertical-aligned ZnO NW arrays growth and its improved optical properties is demonstrated. Importantly, the gas sensor based on these ZnO NWs exhibits high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200 °C, and can detect NO{sub 2} concentration as low as 2, 6 and 10 ppm. The excellent sensing performance is mainly due to the combination of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. Such a ZnO NW/graphene structure is very promising for various applications, such as photonic, optoelectronic and sensor devices. In addition, the possible growth mechanism and the NO{sub 2} sensing gas mechanism of the ZnO NWs-graphene structure have been discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, optical and photo-catalytic activity of nanocrystalline NiO thin films

Highlights: • Synthesis of nanocrystalline NiO thin films with different thicknesses using DC magnetron sputtering technique. • Effect of film thickness and particle size on photo-catalytic degradation of methyl green dye under UV light was studied. • The deposited NiO thin films are efficient, stable and possess high photo-catalytic activity upon reuse. - Abstract: Physical deposition of nanocrystalline nickel oxide (NiO) thin films with different thickness 30, 50 and 80 nm have been done on glass substrate by DC magnetron sputtering technique and varying the deposition time from 600, 900 to 1200 s. The results of surface morphology and optical characterization of these films obtained using different characterization techniques such as X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), photoluminescence (PL) and UV–vis spectrophotometry provide important information like formation of distinct nanostructures in different films and its effect on their optical band gap which has decreased from 3.74 to 3.37 eV as the film thickness increases. Most importantly these films have shown very high stability and a specialty to be recycled without much loss of their photo-catalytic activity, when tested as photo-catalysts for the degradation of methyl green dye (MG) from the wastewater under the exposure of 18 W energy of UV lamp.

36 MATERIALS SCIENCE↗

Evolution of nanoripples on silicon by gas cluster-ion irradiation

Si wafers of (100), (110) and (111) orientations were bombarded by gas cluster ion beam (GCIB) of 3000 Ar-atoms/cluster on average at a series of angles. Similar surface morphology ripples developed in different nanoscales. A simple scaling functional satisfactorily describe the roughness and wavelength of the ripple patterns as a function of dosage and angle of incidence. The ripples are formed orthogonal to the incident cluster-ions at large off-normal angles. An ellipsoidal pattern was created by two consecutive irradiations incident in mutually orthogonal directions with unequal exposure times between each irradiation, from 7:1 to 10:1, beyond which the original ripple imprints would be over-written. This work was inspired by use of the ripples to seed growth of controlled nanostructures without patterning by lithography or predeposition of catalysts.

36 MATERIALS SCIENCE↗

Structural, dielectric and ferroelectric studies of (x) Mg{sub 0.25}Cu{sub 0.25}Zn{sub 0.5}Fe{sub 2}O{sub 4} + (1-x) BaTiO{sub 3} magnetoelectric nano-composites

The Particulate nano-composites of ferrite and ferroelectric phases having the general formula (x) Mg{sub 0.25}Cu{sub 0.25}Zn{sub 0.5}Fe{sub 2}O{sub 4} + (1-x) BaTiO{sub 3} (x=15%, 30% and 45%) were synthesized by sintering mixtures of highly ferroelectric BaTiO{sub 3} (BT) and highly magneto-strictive magnetic component Mg{sub 0.25}Cu{sub 0.25}Zn{sub 0.5}Fe{sub 2}O{sub 4}(MCZF). The presence of constituent phases of ferrite, ferroelectric and their composites were probed and confirmed by X-ray diffraction (XRD) studies. Surface morphology of the samples has been investigated using Field Emission Scanning Electron Microscope (FESEM). The variation of dielectric constant and dissipation factor as a function of frequency from 100 Hz to 1 MHz at room temperature were carried out using a Hioki LCR Hi-Tester. The dielectric constant and dielectric loss were found to decrease rapidly in the low frequency region and became almost constant in the high frequency region. The electrical conductivity deduced from the measured dielectric data has been thoroughly analyzed and found that the conduction mechanism in these composites is in conformity with small polaron hopping model. The ferroelectric properties of synthesized magneto-electric nano-composites were measured using P-E loop tracer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of silver particles on copper substrates using ethanol-based solution for surface-enhanced Raman spectroscopy

The displacement reaction of AgNO{sub 3} and copper metal is an effective and economical way to fabricate Ag-Cu surface enhanced Raman scattering (SERS) substrates. Aqueous solutions of AgNO{sub 3} are usually used for substrate preparation. In this work, a new method for Ag-Cu SERS substrate preparation is proposed, which uses an ethanol solution rather than an aqueous AgNO{sub 3} solution. Analysis of the surface morphologies of sample substrates by field emission scanning electron microscopy (FESEM) showed that the silver nanoparticles prepared by this new method were more regular than those prepared in the traditional aqueous solution. The SERS spectra of Rhodamine 6G (R6G) adsorbed on these Ag-Cu substrates were then investigated and compared. It was found that the Ag-Cu substrates prepared by this method provide significant improvements in Raman signal sensitivity and large-area uniformity. The enhancement factor of this new substrate is about 330 times higher than that prepared using an aqueous AgNO{sub 3} solution under identical experimental conditions. It was also found that 70% of the original sensitivity of the substrate remains after 15 days of exposure to air.

36 MATERIALS SCIENCE↗

Aging effects of the precursor solutions on the properties of spin coated Ga-doped ZnO thin films

In this study, gallium doped zinc oxide thin films (GZO) were grown on a glass substrate by a simple sol-gel process and spin coating technique using zinc acetate and gallium nitrate (3at%) as precursors for Zn and Ga ions respectively. The effects of aging time of the precursor solution on the structural and optical properties of the GZO films were investigated. The surface morphology, grain size, film thickness and optical properties of the GZO films were found to depend directly on the sol aging time. XRD studies reveal that the films are polycrystalline with a hexagonal wurtzite structure and show the c-axis grain orientation. Optical transmittance spectra of all the films exhibited transmittance higher than about 82% within the visible wavelength region. A sharp fundamental absorption edge with a slight blue shifting was observed with an increase in sol aging time which can be explained by Burstein-Moss effect. The result indicates that an appropriate aging time of the sol is important for the improvement of the structural and optical properties of GZO thin films derived from sol-gel method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-Organization of Phase Clusters in Homogeneously Disordered Polymer Composite Materials

The surface morphologies of homogeneously disordered polymer composite films and coatings prepared using mixtures of components with limited or negligible mutual solubility are studied by electron microscopy. We elaborate on the characteristic self-organization of phase clusters in our samples, in which one phase gives rise to the structural scaffold of the composite, an internal percolation cluster of particles. The cluster cavities filled with discrete particle aggregates of the other phase are characterized by a relatively narrow Gaussian-like size distribution. This topological structure arises if composites are prepared by observing specific concentration conditions or using structure modifiers that affect particle aggregation. Self-organization of phase clusters minimizes the entropy production when the components are mixed and gives rise to local ordering in spatial alternation of particle aggregates. The local order transforms into cellular disorder as the length scale increases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Pt and Pd Modified WO{sub 3} and ZnO Based Thin Film Sensors for Ethanol Sensing

Ethanol sensors based on different WO{sub 3} and ZnO structures are studied in the present work. The XRD and SEM processes are used to characterize the sensing layer’s surface morphology which reveals the presence of nanoparticle in sensing layer. Further reducing the nanoparticle diameter by the addition of palladium (Pd) and platinum (Pt) for both the sensors (ZnO and WO{sub 3}) gives good results on sensitivity, operating temperature, response time and recovery time. Nanoparticle diameter for undoped WO{sub 3}, Pd-modified WO{sub 3} and Pt-modified WO{sub 3} based sensors is 11.8, 6 and 5.4 nm, whereas nanoparticle diameter for undoped, Pd-modified and Pt-modified ZnO based sensors is 20, 14 and 11 nm, respectively. Analysis of dynamic response of the sensors when exposed to different concentrations of ethanol vapour (from 500 to 10,000 ppm) and various temperatures indicate the improvement in sensitivity up to 77.2% for WO{sub 3} and 74.6% for ZnO based sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Engineering strain, densification, order parameter and magnetic properties of FePt thin films by dense electronic excitations

FePt films prepared by DC sputtering on Si 〈100〉 substrates when annealed at 600 °C for 1 h exhibited a structurally ordered and magnetically hard L1{sub 0} phase. These FePt films were exposed to dense electronic excitations by using 100 MeV oxygen ions as a function of increasing fluences. Such excitations induce pressure and result in the enhancement of order parameter by increasing strain on the FePt films. Apart from this, the surface morphological images from field emission scanning electron microscopy reveal a densification of the films consequent to irradiation and are correlated with the details obtained from Rutherford back scattering analysis. The variation in the values of coercivity correlates well with the change in volume percentage of face centered tetragonal and face centered cubic phase. A coercivity of 14.7 kOe with order parameter 0.92 is achieved at a fluence of 5 × 10{sup 12} ions/cm{sup 2}. The theoretical simulation of the demagnetization curve shows a strong correlation of coercivity and order parameter between the experimentally obtained values with that of simulation. The effect of irradiation induced strain, the structural ordering and coercivity of FePt films as a function of fluences have been discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoparticles at liquid interfaces: Rotational dynamics and angular locking

Nanoparticles with different surface morphologies that straddle the interface between two immiscible liquids are studied via molecular dynamics simulations. The methodology employed allows us to compute the interfacial free energy at different angular orientations of the nanoparticle. Due to their atomistic nature, the studied nanoparticles present both microscale and macroscale geometrical features and cannot be accurately modeled as a perfectly smooth body (e.g., spheres and cylinders). Under certain physical conditions, microscale features can produce free energy barriers that are much larger than the thermal energy of the surrounding media. The presence of these energy barriers can effectively “lock” the particle at specific angular orientations with respect to the liquid-liquid interface. This work provides new insights on the rotational dynamics of Brownian particles at liquid interfaces and suggests possible strategies to exploit the effects of microscale features with given geometric characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis of highly nitrogen-doped few-layer graphene via solid–gas reaction

Highlights: • A novel approach to synthesis of N-doped few-layer graphene has been developed. • The high doping levels of N in products are achieved. • XPS and XANES results reveal a thermal transformation of N bonding configurations. • The developed method is cost-effective and eco-friendly. - Abstract: Nitrogen-doped (N-doped) graphene sheets with high doping concentration were facilely synthesized through solid–gas reaction of graphene oxide (GO) with ammonia vapor in a self-designed hydrothermal system. The morphology, surface chemistry and electronic structure of N-doped graphene sheets were investigated by TEM, AFM, XRD, XPS, XANES and Raman characterizations. Upon hydrothermal treatment, up to 13.22 at% of nitrogen could be introduced into the crumpled few-layer graphene sheets. Both XPS and XANES analysis reveal that the reaction between oxygen functional groups in GO and ammonia vapor produces amide and amine species in hydrothermally treated GO (HTGO). Subsequent thermal annealing of the resultant HTGO introduces a gradual transformation of nitrogen bonding configurations in graphene sheets from amine N to pyridinic and graphitic N with the increase of annealing temperature. This study provides a simple but cost-effective and eco-friendly method to prepare N-doped graphene materials in large-scale for potential applications.

36 MATERIALS SCIENCE↗

Characterization of niobium-doped titania epitaxial films deposited by metalorganic chemical vapor deposition

Highlights: • The undoped and Nb-doped TiO{sub 2} films were deposited on SrTiO{sub 3} (100) substrates. • The epitaxial growth relationship between TiO{sub 2} film and the substrate was confirmed. • The microstructures of the films were explored. • The electrical and optical properties of the films were revealed. - Abstract: Titania (TiO{sub 2}) films with different niobium (Nb) doping concentrations were deposited on SrTiO{sub 3} (STO) (100) substrates by metalorganic chemical vapor deposition (MOCVD). The crystal structures, surface morphologies, electrical and optical properties of the Nb-doped TiO{sub 2} (TiO{sub 2}:Nb) films varying with Nb content were investigated. The single crystal TiO{sub 2} films with anatase structure were obtained at low Nb doping levels. The highest Hall mobility of the prepared films reached as high as 16.50 cm{sup 2} V{sup −1} s{sup −1}. The lowest resistivity of 5.75 × 10{sup −2} Ω cm with a Hall mobility of 7.40 cm{sup 2} V{sup −1} s{sup −1} and a carrier concentration of 1.47 × 10{sup 19} cm{sup −3} were obtained from the 1.20% Nb-doped TiO{sub 2} film. This resistivity was about 6 orders of magnitude lower than the undoped TiO{sub 2} film. Moreover, all the deposited films exhibited high average transmittances of over 88% in the visible wavelength range.

36 MATERIALS SCIENCE↗

Photoluminescence Characterization of ZnO Thin Films Grown by RF- Sputtering

This article presents photoluminescence (PL) characterization of ZnO thin films deposited by radio-frequency magnetron sputtering method on sapphire and n-type Si (100) substrates. PL measurements were carried out at room temperature to investigate the energy band gaps and optical quality of the ZnO thin films. In order to draw a specific picture of surface morphology of ZnO thin films, atomic force microscope images were taken. All the results were compared to the results obtained from the bulk ZnO sample. The results revealed that the energy band gap of ZnO thin films grown on n-type Si (100) is higher than ZnO on sapphire. However, energy band gap of bulk ZnO is higher compared to both ZnO on n-type Si (100) and sapphire (Al{sub 2}O{sub 3}). This is probably due to the crystalline quality because good crystallinity increases the radiation recombination and hence increase the intensity of the NBE emission.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗