Search NASA⌕ Search

SEARCH · Search NASA

Results for “variability study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Study of heavy-ion collisions in the PHENIX experiment: Survey of the most recent results

The first experimental results obtained at the Relativistic Heavy Ion Collider (RHIC) over the period between 2000 and 2005 are indicative of the production of dense and hot partonic matter in relativistic heavy-ion collisions. Investigations performed in recent years make it possible to extend the list of measured signatures and to study their dependence on the greater number of variables. The most recent results obtained in the PHENIX experiment by studying proton-proton and nucleus-nucleus collisions are surveyed. Particular attention is given to studying the properties of the initial state, dynamical evolution of the product medium, and its response to the propagation of high-energy partons through it. The aforementioned effects are studied via measuring the properties of identified hadrons and leptons over a broad region of transverse momenta at various rapidities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Increasing methane emissions from natural land ecosystems due to sea-level rise

Because methane (CH4) is currently the second most important greenhouse gas, it is important to accurately quantify CH4 emissions from terrestrial ecosystems. Different from many current modelling studies which focus on how CH4 emissions respond to a variety of environmental factors in land ecosystems, we analyzed how methane emitted from lands responded to sea-level increase (SLR) in this study. To do so, a large-scale surface water routing module was incorporated into our existing CH4 model and we designed an efficient simulation protocol to capture small variations in inundation extent due to SLR. Both the annual maximum inundation extent and CH4 emissions showed a steadily growing trend, increasing 1.21 × 105 km2 and 3.13 Tg CH4 /yr globally, respectively, in a 22-year SLR experiment during 1993-2014. Most of new inundation and methane source areas were located near rivers’ deltas and along the downstream reaches of rivers. The increase in inundation extent is primarily influenced by precipitation, channel geomorphic characteristics and topography of riverside area. The growth of CH4 emissions due to the SLR is largely determined by inundation extent but other factors such as temperature and carbon storage also played the important roles. Although the current SLR-induced increases in inundation extent and CH4 emissions only accounted for 1.0% and 1.3% of their global totals, they took 7.0% and 17.3% of the mean annual variability in both, respectively, during the study period. Considering SLR has a long-term but stable increasing trend, future SLR under potential climate change could play a more important role in evaluating dynamic of CH4 emissions.

Lu, Xiaoliang↗

Southern Himalayas rainfall as a key driver of interannual variation of pre-monsoon aerosols over the Tibetan Plateau

The Tibetan Plateau (TP) is one of the most climate-sensitive regions around the world. Aerosols imported from adjacent regions reach their peak during the pre-monsoon season and play a vital role in the TP environment. However, the strong interannual variation in aerosols transported to the TP has not been fully understood. Here, we show that the interannual variability of pre-monsoon aerosols transported to the TP is influenced more by rainfall over the southern Himalayas than near-surface wind. Rainfall modulates fire events and biomass burning emissions and reduces aerosols over the TP by wet scavenging. Contrary to the role of wind in increasing aerosol transport, the positive correlation between wind and aerosols in the TP reported in previous studies is contributed by the negative interannual correlations between wind and rainfall and between rainfall and fire events over the southern Himalayas. This study highlights the co-variability of wind and rainfall and their confounding impacts on aerosols in the southern Himalayas and over the TP. With pre-monsoon rainfall projected to increase in adjacent regions of southern TP, aerosol transport to the TP may be mitigated in the future.

Liu, Weichien↗

Multi-Timescale Integrated Dynamics and Scheduling for Solar (MIDAS-Solar) (Final Technical Report)

Solar photovoltaic (PV) installations have experienced unprecedented growth in the United States. PV will become not only an energy producer but also a necessary provider of ancillary services at multiple timescales. Conventional methods to simulate power systems operations - such as long-term production simulation (which typically considers schedules from hours to minutes by using an optimization framework) and short-term transient studies (which simulate dynamics from seconds to sub-seconds using state variables and differential equations) - are not sufficient for studying the multiple-timescale variation of solar generation and its impact on system reliability. Long-term system economics and short-term system dynamics are highly coupled, particularly when the penetration level of renewable generation is extremely high, because the uncertainty and variability of solar generation will impact both power system steady-state and dynamic performance. This project helps meet and exceed the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Solar Energy Technologies Office goal of systems integration by directly addressing this stability and reliability challenge for power grid planning and operation. We have developed a temporally comprehensive, closed-loop simulation model, named Multi-timescale Integrated Dynamics and Scheduling (MIDAS), that seamlessly simulates power system operations from economic scheduling (day-ahead to hours) to dynamic response analysis (seconds to sub-seconds). For schedules with very high levels of inverter-based resources (IBRs), up to and including 100%, the stability of grid controls has been evaluated through electromagnetic transient (EMT) simulations and power-hardware-in-the-loop (PHIL) simulations of key transient events at key schedule points. Specifically, MIDAS provides: 1) a closed-loop simulation framework for simulating timescales from economic scheduling to dynamic stability analysis; 2) machine learning-based stability assessment; 3) EMT modeling and analysis for large-scale power systems; 4) MIDAS PHIL test bed. We worked with Hawaii Electric Companies to apply the MIDAS study framework to a Maui grid study. The entire island's transmission system was modeled in detail - from a yearly scheduling model, to a second-level frequency dynamic model, down to a sub-second-scale EMT model to address critical stability issues. The project demonstrated how MIDAS can help system planners and operators assess system reliability and stability while the power grid is marching toward a high-renewable, high-IBR future. In this Maui grid study, we found that 100% instantaneous IBR operation is achievable in EMT simulation and PHIL testing, and grid planners and operators might need new analysis/simulation tools to assess grid reliability and stability in the scheduling stage. MIDAS will bring Maui and other systems closer to 100% clean and stable energy futures. (In this study, we examined transient stability. Other topics necessary for 100% IBR operation, such as protection and resource adequacy, were not examined.)

100% Renewables↗

Parameter-Varying Hydrodynamic Model of a Single Vane in a Variable-Geometry Oscillating Surge Wave Energy Converter: Preprint

This paper presents a study on the time-varying hydrodynamic modeling of an individual flap of a variable geometry oscillating surge wave energy converter (VGOSWEC). The WEC design incorporates controlled surfaces that can modify their orientation relative to the wave motion, reducing hydrodynamic pressure and related loads. This research focuses on characterizing the behavior of the oscillating WEC using a simplified model and three methods for achieving a continuous time-variant model: discrete hydrodynamic parameters, interpolation of hydrodynamic parameters, and a fitting function. The results of this study contribute to the understanding of time-varying hydrodynamic effects in variable geometry oscillating WECs. The findings provide insights into the potential for reducing structural loads and improving the overall performance of such devices. Further research and development in this area could lead to advancements in WEC technologies, enabling their integration into the competitive energy market.

HYDRO ENERGY,TIDAL AND WAVE POWER↗

Stable accretion in young stars: the cases of EX Lupi and TW Hya

ABSTRACT We examine the long-term spectroscopic and photometric variability of EX Lupi and TW Hya, studying the presence of stable accretion and the role it plays in the observed variability. Analysing the velocity modulations of the emission lines with star-melt, we obtain information on the structure of the accretion columns and the disc–star connection. The emission-line radial velocities reveal that TW Hya, like EX Lupi, has a remarkably stable or slow-varying accretion column footprint, locked to the star for several years. The line-emitting regions are non-polar for both EX Lupi and TW Hya, and species with different energies differ in position. In contrast, the continuum emission as observed in the photometry is very variable and can be modelled by hotspot(s) that change over time in phase, shape, temperature, size, and location with respect to the emission-line region. The continuum emission region may not be limited to the stellar surface, especially during episodes of high accretion. The broad-line emission observed in EX Lupi during episodes of increased accretion reveals a further structure, which can be fitted by non-axisymmetric disc in Keplerian rotation inwards of the corotation radius. Since the radial velocity modulation due to accretion footprints is so stable, we used it to search for further velocity modulations. While no residual modulation (other than caused by stellar rotation) is found in these objects, a similar analysis could help to identify young planets/companions. Therefore, determining whether stable accretion footprints are common among young stars is a key to detect young planets.

Sicilia-Aguilar, A.↗

High-Resolution Tropical Channel Model Simulations of Tropical Cyclone Climatology and Intraseasonal-to-Interannual Variability

We tailored a tropical channel configuration of the Weather Research and Forecasting (WRF) Model to study tropical cyclone (TC) activity and associated climate variabilities. This tropical channel model (TCM) covers from 30°S to 50°N at 27-km horizontal resolution, with physics parameterizations carefully selected to achieve more realistic simulations of TCs and large-scale climate mean states. In this work we performed 15-member ensembles of retrospective simulations from 1982 to 2016 hurricane seasons. A thorough comparison with observations demonstrates that the TCM yields significant skills in simulating TC activity climatology and variabilities in each basin, as well as TC physical structures. The correlation of the ensemble averaged accumulated cyclone energy (ACE) with observations in the western North Pacific (WNP), eastern North Pacific (ENP), and North Atlantic (NAT) is 0.80, 0.64, and 0.61, respectively, but is insignificant in the north Indian Ocean (NIO). Moreover, the TCM-simulated modulations of El Niño–Southern Oscillation (ENSO) and the Madden–Julian oscillation (MJO) on the large-scale environment and TC genesis also agree well with observations. To examine the TCM’s potential for seasonal TC prediction, the model is used to forecast the 2017 and 2018 hurricane seasons, using bias-corrected sea surface temperatures (SSTs) from the CFSv2 seasonal prediction results. The TCM accurately predicts the hyperactive 2017 NAT hurricane season and near-normal WNP and ENP hurricane seasons when initialized in May. In addition, the TCM accurately predicts TC activity in the NAT and WNP during the 2018 season, but underpredicts ENP TC activity, in association with a poor ENSO forecast.

54 ENVIRONMENTAL SCIENCES↗

Exploration of Preterm Birth Rates Using the Public Health Exposome Database and Computational Analysis Methods

Recent advances in informatics technology has made it possible to integrate, manipulate, and analyze variables from a wide range of scientific disciplines allowing for the examination of complex social problems such as health disparities. This study used 589 county-level variables to identify and compare geographical variation of high and low preterm birth rates. Data were collected from a number of publically available sources, bringing together natality outcomes with attributes of the natural, built, social, and policy environments. Singleton early premature county birth rate, in counties with population size over 100,000 persons provided the dependent variable. Graph theoretical techniques were used to identify a wide range of predictor variables from various domains, including black proportion, obesity and diabetes, sexually transmitted infection rates, mother’s age, income, marriage rates, pollution and temperature among others. Dense subgraphs (paracliques) representing groups of highly correlated variables were resolved into latent factors, which were then used to build a regression model explaining prematurity (R-squared = 76.7%). Two lists of counties with large positive and large negative residuals, indicating unusual prematurity rates given their circumstances, may serve as a starting point for ways to intervene and reduce health disparities for preterm births

Environmental Sciences & Ecology↗

Cylinder-to-Cylinder Variations in Power Production in a Dual Fuel Internal Combustion Engine Leveraging Late Intake Valve Closings

Advanced internal combustion engines, although generally more efficient than conventional combustion engines, often encounter limitations in multi-cylinder applications due to variations in the combustion process. This study leverages experimental data from an inline 6-cylinder heavy-duty dual fuel engine equipped with a fully-flexible variable intake valve actuation system to study cylinder-to-cylinder variations in power production. The engine is operated with late intake valve closure timings in a dual-fuel combustion mode featuring a port-injection and a direct-injection fueling system in order to improve fuel efficiency and engine performance. Experimental results show increased cylinder-to-cylinder variation in IMEP as IVC timing moves from 570°ATDC to 610°ATDC, indicating an increasingly uneven fuel distribution between cylinders. These observations along with engine simulation models developed using GT-Power have been used to better understand the distribution of the port-injected fuel across cylinders under various operating conditions. This study revealed that the fuel distribution across cylinders in this dual fuel application is significantly affected by changes in the effective compression ratio as determined by the intake valve close timing as well as the design of the intake system (specifically the length of the intake runners). Late intake valve closures allow a portion of the trapped air and port injected fuel to flow back out of the cylinders into the intake manifold. The fuel that is pushed back in the intake manifold is then unevenly redistributed across the cylinders largely due to the dominating direction of the flow in the intake manifold. Experimental and simulation results discussing the impact of operating parameters on the fuel distribution are presented.

Kassa, Mateos↗

The Importance of Addressing Disagreements Between Nominal and Effective Treatments During Bat Mortality Minimization Validation Studies

As the wind energy industry grows, so too does our need for effective and low-cost bat mortality minimization solutions. Despite knowledge gaps in our understanding of what drives bats to collide with spinning turbines, minimization solutions have shown success during validation studies. Curtailment has been consistently effective, reducing bat mortality from 33%-79%, depending on the curtailment scenario and species present. Several validation studies have demonstrated deterrent solutions, specifically ultrasonic deterrents, to be effective, but overall, more variable compared to curtailment solutions. Further, a study combining curtailment with ultrasonic deterrents produced encouraging results, finding that adding ultrasonic deterrents to turbines that were designated to curtail, significantly reduced mortality rates compared to curtailment only turbines. Despite positive results, the strength of inference achieved with validation studies is limited by methodological constraints associated with appropriately assigning fatalities to treatments. Because of the temporal separation between when a bat collides with a turbine and when it is discovered during a ground-based carcass survey, we must assign carcasses to a treatment that ran during the prior night(s). This process may introduce errors at multiple stages. First, for studies that rotate treatments among turbines, mortality surveyors must be confident that carcasses are 'fresh' such that mortalities are correctly assigned to the treatment from the previous night(s). Second, we must reconcile any misalignments between how we assign treatments and how we implement treatments (e.g., turbines assigned with a deterrent treatment may be implemented as another treatment when deterrent devices are not operating as designed). Finally, for curtailment solutions, it is critical to recognize that measured effects are a function of not just the treatment as implemented but the proportion of the night the treatment is realized (e.g., if wind speeds are greater than the curtailment treatment cut-in speed for the entire night, we cannot expect there to me any differences in mortality reduction relative to control turbines). Using a dataset collected between June and October 2017, that rotated 3 treatments (Deterrent Only, 5 m/s Curtail only, and 5 m/s Curtail & Deterrent) and 1 control condition across 16 turbines each night, we explored the importance and implications of accounting for potential errors in assigning fatalities to treatments. We present preliminary results comparing the mortality associated with error-corrected treatments and control conditions highlighting how the measured effect of a treatment (mortality) greatly depends on site specific implementation.

bats↗

LOW-STATE MAGNETIC STRUCTURES IN POLARS: NATURE OR NURTURE?

We present an orbit-resolved study of the magnetic cataclysmic variable (MCV) BL Hyi in its low state, and we explore the origin of its H{alpha} emission line components, their properties, and their possible formation mechanism. We tentatively associate one of the line components with a high-velocity component also seen in the high state. We propose a scenario in which streaming prominence-like magnetic loops (super-prominences) are kept in place by magnetic field interactions between the white dwarf and the donor star and are responsible for the high-velocity line components in the Balmer lines. We also discuss how this is in accord with the standard scenario of the secular evolution for MCVs. Finally, we offer an observational test of our ideas and present challenges for future theoretical studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Systematic Approach to Better Understanding Integration Costs: Preprint

When someone mentions integration costs, thoughts of the costs of integrating renewable generation into an existing system come to mind. We think about how variability and uncertainty can increase power system cycling costs as increasing amounts of wind or solar generation are incorporated into the generation mix. However, seldom do we think about what happens to system costs when new baseload generation is added to an existing system or when generation self-schedules. What happens when a highly flexible combined-cycle plant is added? Do system costs go up, or do they go down? Are other, non-cycling, maintenance costs impacted? In this paper we investigate six technologies and operating practices--including VG, baseload generation, generation mix, gas prices, self-scheduling, and fast-start generation--and how changes in these areas can impact a system's operating costs. This paper provides a working definition of integration costs and four components of variable costs. It describes the study approach and how a production cost modeling-based method was used to determine the cost effects, and, as a part of the study approach section, it describes the test system and data used for the comparisons. Finally, it presents the research findings, and, in closing, suggests three areas for future work.

17 WIND ENERGY↗

Assessment of Lignite Quality Variables: A Practical Approach with Sequential Gaussian Simulation

Traditional mine planning methods based on block models built with interpolation techniques such as inverse distance and kriging are inadequate in assessing the uncertainty associated with the technological parameters of coal deposit variables, which are modeled for short-range mine planning because of smoothing effects. However, simulation methods aim at reproducing in situ quality variability and spatial continuity of the attributes of interest. This study outlines the spatial distribution and uncertainty of quality variables at the Tufanbeyli (Adana-Turkey) lignite deposit using a probabilistic approach. A practical approach was based on geostatistical sequential Gaussian simulation (SGS) used to yield a series of conditional images characterized by equally probable spatial distributions of the quality parameters across the deposit. Post processing of many simulations allowed the mapping of maximum/minimum limits for quality values and provided a model for the uncertainty in the spatial distribution of the quality parameters. SGS was validated by a number of tests such as descriptive statistics, histogram, and variogram reproductions. The advantages of SGS were practically illustrated through the case study. The simulated models can be incorporated into mine planning and scheduling.

01 COAL, LIGNITE, AND PEAT↗

Computational multiphysics modeling of radioactive aerosol deposition in diverse human respiratory tract geometries

The evaluation of aerosol exposure relies on generic mathematical models that assume uniform particle deposition profiles over the human respiratory tract and do not account for subject-specific characteristics. Here we introduce a hybrid-automated computational workflow that generates personalized particle deposition profiles in 3D reconstructed human airways from computed tomography scans using Computational Fluid and Particle Dynamics simulations. This is the first large-scale study to consider realistic airways variability, where 380 lower and 40 upper human respiratory tract 3D geometries are reconstructed and parameterized. The data is clustered into nine groups using random forest regression. Computational fluid and particle dynamics simulations are conducted on these representative geometries using a realistic heavy-breathing respiratory cycle and radioactive iodine-131 as a source term. Monte Carlo radiation transport simulations are performed to obtain detailed energy deposition maps. Our findings emphasize the importance of personalized studies, as minor respiratory tract variations notably influence deposition patterns rather than global parameters of the lower airways, observing more than 30% variance in the mass deposition fraction.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Citizen and machine learning-aided high-resolution mapping of urban heat exposure and stress

Abstract Through conversion of land cover to more built-up, impervious surfaces, cities create hotter environments than their surroundings for urban residents, with large differences expected between different parts of the city. Existing measurements of ambient air temperature and heat stress, however, are often insufficient to capture the intra-urban variability in heat exposure. This study provides a replicable method for modeling air temperature, humidity, and moist heat stress over the urban area of Chapel Hill while engaging citizens to collect high-temporal and spatially-resolved air temperature and humidity measurements. We use low-cost, consumer-grade sensors combined with satellite remote sensing data and machine learning to map urban air temperature and relative humidity over various land-cover classes to understand intra-urban spatial variability of ambient heat exposure at a relatively high resolution (10 m). Our findings show that individuals may be exposed to higher levels of air temperature and moist heat stress than weather station data suggest, and that the ambient heat exposure varies according to land cover type, with tree-covered land the coolest and built-up areas the warmest, and time of day, with higher air temperatures observed during the early afternoon. Combining our resulting dataset with sociodemographic data, policymakers and urban planners in Chapel Hill can use data output from this method to identify areas exposed to high temperature and moist heat stress as a first step to design effective mitigation measures.

54 ENVIRONMENTAL SCIENCES↗

Fe–K LINE TIME VARIABILITY AND Ni ABUNDANCE OF DISTANT REFLECTORS IN SEYFERT GALAXIES

We have performed systematic studies of narrow Fe–K line (6.4 keV) flux variability and Ni–K line intensity for Seyfert galaxies, using Suzaku and XMM-Newton archival data. Significant Fe–K line variability of several tens of percent was detected for a pair of observations separated by 1000–2000 days (Cen A, IC 4329 A, NGC 3516, and NGC 4151) and 158 days (NGC 3516). These timescales are larger by a factor of 10–100 than the inner radius of the torus, consistent with the view that X-ray reflection by a torus is a main origin for a narrow Fe–K line. The Ni–K line was detected with a >2σ level for the Circinus galaxy, Cen A, MRK 3, NGC 4388, and NGC 4151. A mean and variance of the Ni–Kα to Fe–Kα line intensity ratios are 0.066 and 0.026, respectively. Comparing this with the Monte-Carlo simulation of reflection, the Ni to Fe abundance ratio is 1.9 ± 0.8 solar. We discuss the results and the possibility of Ni abundance enhancement.

79 ASTRONOMY AND ASTROPHYSICS↗

Precision determination of invisible-particle masses at the CERN LHC

We develop techniques to determine the mass scale of invisible particles pair-produced at hadron colliders. We employ the constrained mass variable m{sub 2C}, which provides an event-by-event lower bound to the mass scale given a mass difference. We complement this variable with a new variable m{sub 2C,UB} which provides an additional upper bound to the mass scale and demonstrate its utility with a realistic case study of a supersymmetry model. These variables together effectively quantify the 'kink' in the function max m{sub T2} which has been proposed as a mass-determination technique for collider-produced dark matter. An important advantage of the m{sub 2C} method is that it does not rely simply on the position at the end point, but it uses the additional information contained in events which lie far from the end point. We found the mass by comparing the HERWIG generated m{sub 2C} distribution to ideal distributions for different masses. We find that for the case studied, with 100 fb{sup -1} of integrated luminosity (about 400 signal events), the invisible particle's mass can be measured to a precision of 4.1 GeV. We conclude that this technique's precision and accuracy is as good as, if not better than, the best known techniques for invisible-particle mass determination at hadron colliders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Controlled Shifts of X-ray Emission Lines Measured with Transition Edge Sensors at the Advanced Photon Source

The measurement of shifts in the energy of X-ray emission lines is important for understanding the electronic structure and physical properties of materials. In this study, we demonstrate a method using a synchrotron source to introduce controlled eV-scale shifts of a narrow line in between fixed-energy fluorescence lines. We use this to characterize the ability of a hard X-ray superconducting Transition Edge Sensor (TES) array to measure line shifts. Fixed fluorescence lines excited by higher harmonics of the monochromatic X-ray beam are used for online energy calibration, while elastic scattering from the primary harmonic acts as the variable energy emission line under study. We use this method to demonstrate the ability to track shifts in the energy of the elastic scattering line of magnitude smaller than the TES energy resolution, and find we are ultimately limited by our calibration procedure. The method can be applied over a wide X-ray energy range and provides a robust approach for the characterization of the ability of high-resolution detectors to detect X-ray emission line shifts, and the quantitative comparison of energy calibration procedures.

Guruswamy, Tejas (ORCID:0000000241656765)↗