Search NASA⌕ Search

SEARCH · Search NASA

Results for “AFM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Role of laser energy density on growth of highly oriented topological insulator Bi{sub 2}Se{sub 3} thin films

Topological insulators (TIs) are very promising in the field of nanoelectronics due to their exotic properties. Bismuth Selenide, a 3D Topological insulator is considered as reference TI owing to its simple band structure and large bandgap. However, the presence of unintentional doping, which masks the metallic surface states, is still a major concern. In this work, we report the effect of laser energy density on the growth of highly oriented and stoichiometric thin films of Bi{sub 2}Se{sub 3} by pulsed laser deposition (PLD). Structural characterizations by X-ray diffraction (XRD) and Raman Spectroscopy confirms the c-axis orientation and good crystallinity of films. Atomic force microscopy (AFM) study shows the increase in average grain size and rms roughness (from 3.1 nm to 5.1 nm) with the decrease in laser energy density. Compositional study by X-Ray Reflectivity (XRR) measurement is found to be in agreement with AFM results. Energy dispersive x-ray spectroscopy (EDS) measurements confirm the desired stoichiometry of the samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelectric properties of CuS/Ag{sub 2}S nanocomposites synthesed by modified polyol method

This is the report on successful synthesis of Ag doped CuS nanostructures by modified polyol method. The resulting samples were characterized by powder X-ray diffraction (XRD), energy dispersive X-ray (EDX), atomic force microscopy (AFM) and dynamic light scattering (DLS). Particle size of pure CuS nanoparticles (NPs) was 17 nm, 38 nm and 97 nm as determined from Scherrer formula, AFM and DLS, respectively. Introduction of Ag led to formation of CuS/Ag{sub 2}S composites. A transition at 55 K in thermopower is ascribed to structural transformation from hexagonal to orthorhombic structure. Further, their thermoelectric properties exhibit remarkable change owing to Ag doping in CuS nanostructures. The power factor improves with increasing Ag content. They reveal that CuS/Ag{sub 2}S nanocomposites are some of the potential candidates for generation of thermoelectricity in future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of annealing temperature on the morphology and optical properties of PMMA films by spin-coating method

Poly(methyl methacrylate) (PMMA) films were deposited on glass substrate by sol-gel spin-coating method. The films were annealed for 10 minutes in furnace at different annealing temperature of room temperature, 50, 100, 150 and 200 °C. The effect of annealing temperatures to the surface and optical properties of PMMA films spin-coated on the substrate were investigated by Atomic Force Microscope (AFM) and Ultraviolet-Visible (UV-Vis) Spectroscopy. It was observed in AFM analysis all the annealed films show excellent smooth surface with zero roughness. All the samples demonstrate a high transmittance of 80% in UV region as shown in UV-Vis measurement. Highly transparent films indicate the films are good optical properties and could be applied in various optical applications and also in non-linear optics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stimulated Raman spectroscopy and nanoscopy of molecules using near field photon induced forces without resonant electronic enhancement gain

We report on stimulated Raman spectroscopy and nanoscopy of molecules, excited without resonant electronic enhancement gain, and recorded using near field photon induced forces. Photon-induced interaction forces between the sharp metal coated silicon tip of an Atomic Force Microscope (AFM) and a sample resulting from stimulated Raman excitation were detected. We controlled the tip to sample spacing using the higher order flexural eigenmodes of the AFM cantilever, enabling the tip to come very close to the sample. As a result, the detection sensitivity was increased compared with previous work on Raman force microscopy. Raman vibrational spectra of azobenzene thiol and l-phenylalanine were measured and found to agree well with published results. Near-field force detection eliminates the need for far-field optical spectrometer detection. Recorded images show spatial resolution far below the optical diffraction limit. Further optimization and use of ultrafast pulsed lasers could push the detection sensitivity towards the single molecule limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation on nanoscale processes on the BaF{sub 2}(111) surface in various solutions by frequency modulation atomic force microscopy

In this study, we have directly observed nanoscale processes that occur on BaF{sub 2}(111) surfaces in various solutions using liquid-environment frequency modulation atomic force microscopy (FM-AFM) with a true atomic resolution. In addition, to investigate atomic-scale mechanisms of crystal growth process of BaF{sub 2}, we determined a suitable solution for atomic-resolution FM-AFM imaging of the BaF{sub 2}(111) surface. For undersaturated solutions, the surface is roughened by barium hydroxo complexes in the case of high pH, whereas by dissolution and proton or water molecule adsorption throughout the surface in the case of low pH. On the other hand, for supersaturated solutions, the surface shows two-dimensional nucleation and growth (σ = 0.1) and three-dimensional crystal growth with tetrahedral structures (σ = 1), where σ is the degree of supersaturation. The atomic-resolution imaging of the BaF{sub 2}(111) surface has been demonstrated in potassium fluoride (KF) and the supersaturated (σ = 0.1 and 1) solutions, wherein atomically flat terraces are shown at least for about 30 min.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Realizing stable fully spin polarized transport in SiC nanoribbons with dopant

Intrinsic half-metallicity recently reported in zigzag edged SiC nanoribbons is basically undetectable due to negligible energy difference between the antiferromagnetic (AFM) and ferromagnetic (FM) configurations. In this Letter, by density functional theory calculations, we demonstrate a scheme of N doping at the carbon edge to selectively close the edge state channel at this edge and achieve 100% spin filtering, no matter whether it is in an AFM state or FM state. This turns SiC nanoribbon into a promising material for obtaining stable and completely spin polarized transport and may find application in spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multimode resistive switching in nanoscale hafnium oxide stack as studied by atomic force microscopy

The nanoscale resistive switching in hafnium oxide stack is investigated by the conductive atomic force microscopy (C-AFM). The initial oxide stack is insulating and electrical stress from the C-AFM tip induces nanometric conductive filaments. Multimode resistive switching can be observed in consecutive operation cycles at one spot. The different modes are interpreted in the framework of a low defect quantum point contact theory. The model implies that the optimization of the conductive filament active region is crucial for the future application of nanoscale resistive switching devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface termination structure of α-Ga{sub 2}O{sub 3} film grown by mist chemical vapor deposition

The surface structure of α-Ga{sub 2}O{sub 3}(0001) grown on an α-Al{sub 2}O{sub 3}(0001) substrate by mist chemical vapor deposition was studied by coaxial impact-collision ion scattering spectroscopy (CAICISS) and atomic force microscopy (AFM). The minimum step height observed in the AFM image was 0.21 ± 0.01 nm, coinciding with the height of three atomic layers of α-Ga{sub 2}O{sub 3}(0001). It was revealed by CAICISS analysis that the surface of α-Ga{sub 2}O{sub 3}(0001) is terminated by a Ga layer followed by an O layer, which is consistent with the surface termination of α-Al{sub 2}O{sub 3}(0001). A structural model taking surface relaxation into account was also constructed by fitting the simulated curve for the azimuth angle dependence of the Ga intensity to the experimental dependence. The resultant structural model is similar to the model of an α-Al{sub 2}O{sub 3}(0001) surface, which indicates analogous behavior in corundum crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure and metallization of cubic GdH{sub 3} under pressure: Ab initio many-body GW calculations

The electronic structures of the cubic GdH{sub 3} are extensively investigated using the ab initio many-body GW calculations treating the Gd 4f electrons either in the core (4f-core) or in the valence states (4f-val). Different degrees of quasiparticle (QP) self-consistent calculations with the different starting points are used to correct the failures of the GGA/GGA + U/HSE03 calculations. In the 4f-core case, GGA + G{sub 0}W{sub 0} calculations give a fundamental band gap of 1.72 eV, while GGA+ GW{sub 0} or GGA + GW calculations present a larger band gap. In the 4f-val case, the nonlocal exchange-correlation (xc) functional HSE03 can account much better for the strong localization of the 4f states than the semilocal or Hubbard U corrected xc functional in the Kohn–Sham equation. We show that the fundamental gap of the antiferromagnetic (AFM) or ferromagnetic (FM) GdH{sub 3} can be opened up by solving the QP equation with improved starting point of eigenvalues and wave functions given by HSE03. The HSE03 + G{sub 0}W{sub 0} calculations present a fundamental band gap of 2.73 eV in the AFM configuration, and the results of the corresponding GW{sub 0} and GW calculations are 2.89 and 3.03 eV, respectively. In general, for the cubic structure, the fundamental gap from G{sub 0}W{sub 0} calculations in the 4f-core case is the closest to the real result. By G{sub 0}W{sub 0} calculations in the 4f-core case, we find that H or Gd defects can strongly affect the band structure, especially the H defects. We explain the mechanism in terms of the possible electron correlation on the hydrogen site. Under compression, the insulator-to-metal transition in the cubic GdH{sub 3} occurs around 40 GPa, which might be a satisfied prediction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Colossal magnetodielectric effect and spin flop in magnetoelectric Co{sub 4}Nb{sub 2}O{sub 9} crystal

We have investigated the detailed magnetic, magnetoelectric (ME), magnetodielectric (MD) and thermal expansion properties in Co{sub 4}Nb{sub 2}O{sub 9} crystal. A magnetic-field-induced spin flop was observed below antiferromagnetic (AFM) transition temperature T{sub N}. Dielectric constant at applied magnetic field nearly diverges around the AFM transition, giving rise to a colossal MD effect as high as ∼138% around T{sub N}. Theoretical analysis of the ME and MD data revealed a major contribution of critical spin fluctuation to the colossal MD effect in Co{sub 4}Nb{sub 2}O{sub 9}. These results suggest that linear ME materials with large ME coupling might be potentially used to realize large MD effect for future application.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface roughness estimation of MBE grown CdTe/GaAs(211)B by ex-situ spectroscopic ellipsometry

Spectroscopic ellipsometry (SE) ranging from 1.24 eV to 5.05 eV is used to obtain the film thickness and optical properties of high index (211) CdTe films. A three-layer optical model (oxide/CdTe/GaAs) was chosen for the ex-situ ellipsometric data analysis. Surface roughness cannot be determined by the optical model if oxide is included. We show that roughness can be accurately estimated, without any optical model, by utilizing the correlation between SE data (namely the imaginary part of the dielectric function, <ε{sub 2} > or phase angle, ψ) and atomic force microscopy (AFM) roughness. <ε{sub 2} > and ψ values at 3.31 eV, which corresponds to E{sub 1} critical transition energy of CdTe band structure, are chosen for the correlation since E{sub 1} gives higher resolution than the other critical transition energies. On the other hand, due to the anisotropic characteristic of (211) oriented CdTe surfaces, SE data (<ε{sub 2} > and ψ) shows varieties for different azimuthal angle measurements. For this reason, in order to estimate the surface roughness by considering these correlations, it is shown that SE measurements need to be taken at the same surface azimuthal angle. Estimating surface roughness in this manner is an accurate way to eliminate cumbersome surface roughness measurement by AFM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on aggregation and electric properties in the micro-region of functionalized dithieno[2, 3-b: 3′, 2′-d]thiophene (DTT) oligomers

Three kinds of 2,5,-diphenyl-dithienol[2, 3-b: 3′, 2′-d]thiophene (DP-DTT), 2,5,-distyryl-dithienol[2, 3-b: 3′, 2′-d]thiophene (DEP-DTT) and 2,5,-thienyl-dithienol[2, 3-b: 3′, 2′-d]thiophene (DET-DTT) micro-region structure and electronic properties were studied. Thin films of these functionalized DTT oligomers were prepared in a one-step drop-casting deposition onto highly oriented pyrolytic graphite substrates. The surface structure of these films was characterized by atomic force microscopy (AFM). Conducting probe atomic force microscope (C-AFM) and Kelvin probe force microscope (KFM) were both used to characterize the electronic transport behavior and surface potential distribution. The substituents of DTT oligomers can greatly affect their aggregation and the hopping conductance mechanism was used to explain the Au-DTTs-HOPG junctions. KFM investigation revealed that these oligomers with different substituents have different highest occupied molecular orbital energy levels. The corresponding theoretical analysis reveals similar result to KFM characterization. The I-V results indicated that the aggregates of molecules were the dominating factor to their micro-region electrical transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magneto-electric coupling in antiferromagnet/ferroelectric Mn{sub 2}Au/BaTiO{sub 3} interface

Within the crucial issue of the electric field control of magnetism, the use of antiferromagnets (AFMs) coupled to ferroelectrics is much less explored than the ferromagnets counterpart, although the first choice might lead to better performances and larger stability with respect to external perturbations (such as magnetic fields). Here, we explore the possibility to control the magnetic anisotropy of a Mn{sub 2}Au layer by reversing the ferroelectric polarization of BaTiO{sub 3} in Mn{sub 2}Au/BaTiO{sub 3} interfaces. By means of a thorough exploration of many possible geometry configurations, we identify the two most stable, corresponding to compressive and tensile strain at the interface. The first appears to be easy-axis, while the second—easy-plane—with a large induced moment on the interface Ti atom. The reversal of ferroelectric polarization changes the anisotropy by approximately 50%, thus paving the way to the control of AFM properties with an electric field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic properties of Mn{sub 1.9}Cu{sub 0.1}Sb under high pressure

Magnetization measurements were carried out for polycrystalline Mn{sub 1.9}Cu{sub 0.1}Sb in magnetic fields up to 5 T in the 10-300 K temperature range under high pressures up to 1 GPa in order to investigate the magnetic properties and the thermal transformation arrest (TTA) phenomenon under high pressures. The spin-reorientation temperature increased from 202 K for 0.1 MPa to 244 K for 1 GPa, whereas the transition temperature from the ferrimagnetic (FRI) to antiferromagnetic (AFM) state did not drastically change at ∼116 K. The magnetic relaxation behavior from the FRI to AFM state was observed in 10 < T ≤ 70 K, which was analyzed using the Kohlrausch-Williams-Watts model. Obtained results indicated that the TTA phenomenon of Mn{sub 1.9}Cu{sub 0.1}Sb was suppressed by the application of high pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of electrocatalytic Ta nanoparticles by reactive sputtering and ion soft landing

About 40 years ago, it was shown that tungsten carbide exhibits similar catalytic behavior to Pt for certain commercially relevant reactions, thereby suggesting the possibility of cheaper and earth-abundant substitutes for costly and rare precious metal catalysts. In this work, reactive magnetron sputtering of Ta in the presence of three model hydrocarbons (2-butanol, heptane, and m-xylene) combined with gas aggregation and ion soft landing was employed to prepare organic-inorganic hybrid nanoparticles (NPs) on surfaces for evaluation of catalytic activity and durability. The electro-catalytic behavior of the NPs supported on glassy carbon was evaluated in acidic aqueous solution by cyclic voltammetry. The Ta-heptane and Ta-xylene NPs were revealed to be active and robust toward promotion of the oxygen reduction reaction, an important process occurring at the cathode in fuel cells. In comparison, pure Ta and Ta-butanol NPs were essentially unreactive. Characterization techniques including atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) were applied to probe how different sputtering conditions such as the flow rates of gases, sputtering current, and aggregation length affect the properties of the NPs. AFM images reveal the focused size of the NPs as well as their preferential binding along the step edges of graphite surfaces. In comparison, TEM images of the same NPs on carbon grids show that they bind randomly to the surface with some agglomeration but little coalescence. The TEM images also reveal morphologies with crystalline cores surrounded by amorphous regions for NPs formed in the presence of 2-butanol and heptane. In contrast, NPs formed in the presence of m-xylene are amorphous throughout. XPS spectra indicate that while the percentage of Ta, C, and O in the NPs varies depending on the sputtering conditions and hydrocarbon employed, the electron binding energies of the elements are similar for all of the NPs. Here, the difference in reactivity between the NPs is attributed to their Ta/C ratios. Collectively, the findings presented herein indicate that reactive magnetron sputtering and gas aggregation combined with ion soft landing offer a promising physical approach for the synthesis of organic-inorganic hybrid NPs that have potential as low-cost durable substitutes for precious metals in catalysis

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain control of the Néel vector in Mn-based antiferromagnets

Control of the Néel vector in antiferromagnetic (AFM) materials is one of the challenges preventing their use as active device components. Several methods have been investigated such as exchange bias, electric current, and spin injection, but little is known about strain-mediated anisotropy. This study of the AFM L1 0 -type MnX alloys MnIr, MnRh, MnNi, MnPd, and MnPt shows that a small amount of strain effectively rotates the direction of the Néel vector by 90° for all of the materials. For MnIr, MnRh, MnNi, and MnPd, the Néel vector rotates within the basal plane. For MnPt, the Néel vector rotates from out-of-plane to in-plane under tensile strain. The effectiveness of strain control is quantified by a metric of efficiency and by direct calculation of the magnetostriction coefficients. The values of the magnetostriction coefficients are comparable with those from ferromagnetic materials. Finally, these results indicate that strain is a mechanism that can be exploited for control of the Néel vectors in this family of antiferromagnets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In situ multimodal imaging for nanoscale visualization of tribofilm formation

A third of the energy from fuel combustion in passenger car gasoline engines is lost due to friction. Carefully designed engine lubricants can recover some of these losses by reducing friction and wear by forming a nanometer-scale chemico-physico tribofilm between surfaces. Accordingly, attention has focused on developing oil formulations that form low-friction tribofilms. However, analyses of resultant tribofilms are typically conducted after tribo-tests with conventional characterization tools and do not offer insights into tribofilm formation and evolution, precluding information critical to tuning tribofilm properties. In this work, we developed a unique multimodal methodology based on Atomic Force Microscopy (AFM) with local probe heating for in situ tribological studies that activates friction modifiers and simultaneously captures the evolution of friction and surface roughness, with nanometer resolution. As a platform to demonstrate the ability of this methodology to visualize dynamics of tribofilm formation in situ, we apply it to molybdenum-based friction modifiers to distinguish key factors in their functionality and correlate nanoscale AFM and Friction Force Microscopy data to bench tribo-tests used in the industry. To decode the formation mechanisms observed in situ and underlying chemistry of tribofilms, we performed ab initio Molecular Dynamics (AIMD) simulations at comparable conditions. AIMD simulations confirmed both nanoscale and bench tribo-test results and showed deviations in molecular organization in tribofilms that are formed from different molybdenum-based friction modifiers that corroborates with surface functionality. With this innovative methodology, we demonstrate proof-of-principle in situ formation of molybdenum-based tribofilms directly on steel surfaces that could be applied generally to studying tribofilm formation.

36 MATERIALS SCIENCE↗

High quality epitaxial thin films and exchange bias of antiferromagnetic Dirac semimetal FeSn

FeSn is a topological semimetal (TSM) and kagome antiferromagnet (AFM) composed of alternating Fe 3 Sn kagome planes and honeycomb Sn planes. This unique structure gives rise to exotic features in the band structures such as the coexistence of Dirac cones and flatbands near the Fermi level, fully spin-polarized 2D surface Dirac fermions, and the ability to open a large gap in the Dirac cone by reorienting the Néel vector. In this paper, we report the synthesis of high-quality epitaxial (0001) FeSn films by magnetron sputtering. Using FeSn/Py heterostructures, we show a large exchange bias effect that reaches an exchange field of 220 Oe at 5 K, providing unambiguous evidence of antiferromagnetism and strong interlayer exchange coupling in our films. Field cycling studies show steep initial training effects, highlighting the complex magnetic interactions and anisotropy. Importantly, our work provides a simple, alternative means to fabricate FeSn films and heterostructures, making it easier to explore the topological physics of AFM TSMs and develop FeSn-based spintronics.

36 MATERIALS SCIENCE↗