Search NASA⌕ Search

SEARCH · Search NASA

Results for “AIRFOILS - CASCADES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

A comparison of computer-generated lift and drag polars for a Wortmann airfoil to flight and wind tunnel results

Computations of drag polars for a low-speed Wortmann sailplane airfoil are compared to both wind tunnel and flight results. Excellent correlation is shown to exist between computations and flight results except when separated flow regimes were encountered. Wind tunnel transition locations are shown to agree with computed predictions. Smoothness of the input coordinates to the PROFILE airfoil analysis computer program was found to be essential to obtain accurate comparisons of drag polars or transition location to either the flight or wind tunnel results.

Bowers, A. H.↗

Impact of airfoil profile on the supersonic aerodynamics of delta wings

A nonlinear flow model was employed to predict the flowfield, pressure and force data for delta wings at supersonic speeds. The goal of the study was to investigate the influence the airfoil profiles has on the wing aerodynamics. The analysis covers wing aspect ratios from 0.5-3.0 with leading edge sweep of 0.5-4.0 on diamond, circular arc and NACA modified 4-digit airfoils. Nonlinear aerodynamics are approximated with nonlinear zero-lift wave drag curves, yielding results significantly different from those obtained from linear calculations. The analytical technique, useful in preliminary design studies, indicates in all cases that 90 percent of wave drag is generated at the wing apex and trailing edge.

Wood, R. M.↗

Conference on Low Reynolds Number Airfoil Aerodynamics, Notre Dame, IN, June 16-18, 1985, Proceedings

Topics of interest in the design, flow modeling and visualization, and turbulence and flow separation effects for low Reynolds number (Re) airfoils are discussed. Design methods are presented for Re from 50,000-500,000, including a viscous-inviscid coupling method and by using a constrained pitching moment. The effects of pressure gradients, unsteady viscous aerodynamics and separation bubbles are investigated, with particular note made of factors which most influence the size and location of separation bubbles and control their effects. Attention is also given to experimentation with low Re airfoils and to numerical models of symmetry breaking and lift hysteresis from separation. Both steady and unsteady flow experiments are reviewed, with the trials having been held in wind tunnels and the free atmosphere. The topics discussed are of interest to designers of RPVs, high altitude aircraft, sailplanes, ultralights and wind turbines.

Mueller, T. J.↗

Airfoil design for Reynolds numbers between 50,000 and 500,000

The design of airfoils for flows with Re of 50,000-500,000 requires consideration of laminar separation bubbles. A design approach is discussed which specifies the angle of attack at which the potential flow velocity is to be constant at each segment of the airfoil. The velocity gradient is controlled by introducing a pressure recovery function at the trailing edge. Boundary layer stability decreases with rising Re, although an upper Re value can be identified, below which the boundary layer will be stable. Adverse pressure gradients are associated with the shape parameter of the velocity profile, whose rise in value decreases stability. Transition displays similar relationships to the shape parameter. The most frequent feature of separation is the appearance of a separation bubble.

R Eppler↗

A direct-inverse method for the prediction of transonic and separated flows about airfoils at high angles of attack

A direct-inverse technique and computer program called TAMSEP that can be used for the analysis of the flow about airfoils at subsonic and low transonic freestream velocities is presented. The method is based upon a direct-inverse nonconservative full potential inviscid method, a Thwaites laminar boundary layer technique, and the Barnwell turbulent momentum integral scheme; and it is formulated using Cartesian coordinates. Since the method utilizes inverse boundary conditions in regions of separated flow, it is suitable for predicting the flowfield about airfoils having trailing edge separated flow under high lift conditions. Comparisons with experimental data indicate that the method should be a useful tool for applied aerodynamic analyses.

Carlson, L. A.↗

Application of laser-velocimetry to the study of the flow around a two-dimensional airfoil

The experimental techniques employed by NASA researchers to obtain a high volume throughput of data in a study of high-lift multielement airfoils using a laser velocimeter (LV) are detailed. The two-dimensional LV system recorded mean velocity, turbulence intensities, Re shear stresses, skewness and kurtosis of the flow. A computer-controlled positioning mount for the LV allowed automated surveys of the flows with a 0.001 in. positioning accuracy. The flow was seeded with oil droplets and additional refinement of the wind tunnel controls permitted rapid speedup at selected areas of the flowfield over specific regions of the airfoil. Surface pressure taps furnished data for selecting regions for more detailed investigation. The data processing capabilities processed 30-40 samples every 10 min in an automated mode. Profiles of the data were computed automatically to furnish graphical displays on demand. Numerous samples of the data displays generated are provided.

Braden, J. A.↗

The performance characteristics of simulated ice on rotorcraft airfoils

Attention is given to the results of NASA-sponsored rotorcraft icing research which was aimed at the formulation of a predictive method for the computation of performance penalties due to rotor and airfoil icing. Parametric simulated ice test results obtained in wind tunnels are compared with those of other investigations. These comparisons indicate that proper design of simulated ice shapes can adequately represent ice on airfoil sections, with incremental lift, drag, and pitching moments matching those generated in icing wind tunnels.

Flemming, R. J.↗

Calculation of helicopter airfoil characteristics for high tip-speed applications

In this paper, we have applied a new aerodynamic tool to the study of helicopter airfoil characteristics. We have shown that the computed airloads reproduce completely the experimental behavior of representative airfoils across the transonic regime. In addition, the computational details of the flow fields, the surface pressure distributions, and the viscous-layer characteristics enable us to trace the evolution of the physical changes that occur as m infinity or Re increases. Descriptions of the complicated development of shock waves, shock-induced separation supplement the information that has been obtained heretofore in wind tunnels. In validating our calculations and assessing the accuracy of the results, including extensive grid-refinement studies and comparisons with data from numerous wind tunnels, we have defined the capabilities and limitations of the code ARC2D more precisely. This important aspect of the investigations can complement wind-tunnel tests, by providing flow-field details that are difficult to measure and by extending the range of low parameters beyond the capabilities of existing wind tunnels. The code has now progressed from a purely research stage to almost a production stage, where it can be run by specialists in the helicopter industry.

Mccroskey, W. J.↗

Transonic airfoil calculations including wind tunnel wall-interference effects

The results of Reynolds-averaged time-dependent inviscid and turbulent compressible Navier-Stokes computations using the implicit finite-difference approach of Steger (1978), modified by incorporating a pressure boundary condition, (PBC) to account for wall interference are compared with experimental data on a NACA 64A010 airfoil (Johnson and Bachalo, 1980) in graphs and briefly characterized. The computational approach is the same as that used by King and Johnson (1980), but a 137 x 50 mesh is used instead of a 97 x 35 mesh, and special care is taken in resolving the nose, shock, and trailing-edge regions. Imposition of PBC is shown to improve significantly the accuracy of the computations for the flowfield on the upper surface of the airfoil, shifting the shock forward to its experimentally measured position in the case of turbulent flow. The failure of the method, even with PBC, to match the experimental shock location in the case of a flow with a separation bubble is attributed to inadequacies in the algebraic turbulence model employed (Baldwin and Lomax, 1978).

King, L. S.↗

High-Lift, Low-Pitching-Moment Airfoils

Two families of airfoil shapes improve rotor performance. Improvements enhance performances of helicopters and other rotorcraft but also applicable to aircraft propellers. Airfoil shapes best suited for inboard segment of rotor blade.

Noonan, Kevin W.↗

Development of heat flux sensors in turbine airfoils

The objective is to develop heat flux sensors suitable for use on turbine airfoils and to verify the operation of the heat flux measurement techniques through laboratory experiments. The requirements for a program to investigate the measurement of heat flux on airfoils in areas of strong non-one-dimensional flow were also identified.

Atkinson, W. H.↗

A verification of unsteady Navier-Stokes solutions around oscillating airfoils

A finite difference solution code for the two dimensional Navier-Stokes equations was combined with a moving-grid system. The thin layer Navier-Stokes equations with a turbulence model are solved in a time-accurate manner in order to study the unsteady aerodynamics around airfoils undergoing small amplitude pitching or heaving motions in the transonic regime. The accuracy of the solutions obtained by the use of the present moving-grid technqiue is investigated. The effects of the minimum grid size and the integrating time-step size on the solutions are also checked. Some of the solutions obtained by the present method are compared with experimental results. It is demonstrated that the unsteady aerodynamics around oscillating airfoils can be predicted fairly well by the present code for cases in which the dynamic angle of attack or displacement is small.

Nakamichi, J.↗

TRANDESNF: A computer program for transonic airfoil design and analysis in nonuniform flow

The use of a transonic airfoil code for analysis, inverse design, and direct optimization of an airfoil immersed in propfan slipstream is described. A summary of the theoretical method, program capabilities, input format, output variables, and program execution are described. Input data of sample test cases and the corresponding output are given.

Chang, J. F.↗

Highlights of unsteady pressure tests on a 14 percent supercritical airfoil at high Reynolds number, transonic condition

Steady and unsteady pressures were measured on a 2-D supercritical airfoil in the Langley Research Center 0.3-m Transonic Cryogenic Tunnel at Reynolds numbers from 6 x 1,000,000 to 35 x 1,000,000. The airfoil was oscillated in pitch at amplitudes from plus or minus .25 degrees to plus or minus 1.0 degrees at frequencies from 5 Hz to 60 Hz. The special requirements of testing an unsteady pressure model in a pressurized cryogenic tunnel are discussed. Selected steady measured data are presented and are compared with GRUMFOIL calculations at Reynolds number of 6 x 1,000,000 and 30 x 1,000,000. Experimental unsteady results at Reynolds numbers of 6 x 1,000,000 and 30 x 1,000,000 are examined for Reynolds number effects. Measured unsteady results at two mean angles of attack at a Reynolds number of 30 x 1,000,000 are also examined.

Hess, Robert W.↗

Two-dimensional aerodynamic characteristics of the AMES HI-120, HI-8, and LOW-12 airfoils

During the period between June and September 1986, the Aeronautical and Astronautical Engineering Research Laboratory (AARL) at the Ohio State University (OSU) in Columbus, Ohio, conducted tests in the 6"X22" Transonic Blowdown Wind Tunnel to determine the two-dimensional lift, drag, and pitching moment coefficients for three airfoils designated AMES HI-120, AMES LOW-12, and AMES HI-8. These tests covered a Mach number range of 0.20 to 0.86, Reynolds numbers between 2 x 10 to the 6th and 6 x 10 to the 6th powers, and angles of attack between 0 and 13 degs as directed by the NASA Project Engineer; each model was not run at every condition. This work was performed under NASA Grant NAG-2-401, Analysis of Two Advanced Transonic Airfoils.

Gregorek, G. M.↗

Acoustic effects on profile drag of a laminar flow airfoil

A two-dimensional laminar flow airfoil (NLF-0414) was subjected to high-intensity sound (pure tones and white noise) over a frequency range of 2 to 5 kHz, while immersed in a flow of 240 ft/sec (Rn of 3 million) in a quiet flow facility. Using a wake-rake, wake dynamic pressures were determined and the deficit in momentum was used to calculate a two dimensional drag coefficient. Significant increases in drag were observed when the airfoil was subjected to the high intensity sound at critical sound frequencies. However, the increased drag was not accompanied by movement of the transition location.

Shearin, John G.↗

Highlights of unsteady pressure tests on a 14 percent supercritical airfoil at high Reynolds number, transonic condition

Steady and unsteady pressures were measured on a two-dimensional supercritical airfoil in the Langley 0.3-m Transonic Cryogenic Tunnel at Reynolds numbers (6-35) x 10 to the 6th. The airfoil was oscillated in pitch at amplitudes from + or - .25 degrees to + or - 1.0 degrees at frequencies from 5 Hz to 60 Hz. The special requirements of testing an unsteady pressure model in a pressurized cryogenic tunnel are discussed. Selected steady measured data are presented and are compared with GRUMFOIL calculations at Reynolds number 6 x 10 to the 6th and 30 x 10 to the 6th. Experimental unsteady results at the same Reynolds numbers are examined for Reynolds-number effects. Measured unsteady results at two mean angles of attack at Reynolds number of 30 x 10 to the 6th are also examined.

Hess, Robert W.↗

Numerical analysis of a NACA0012 airfoil with leading edge ice accretions

Analysis of a NACA0012 airfoil with leading edge ice has been performed using a Navier-Stokes code coupled with a grid generation code. The computed results were compared to experimental information obtained for an airfoil with a well defined artificial ice shape. The computations were performed at angles of attack ranging from zero to ten degrees. This range is sufficient to show the development of the separation bubble aft of the ice shape on both the upper and lower surfaces. Velocity profile plots in the separation bubble are examined in order to determine if recirculation patterns are predicted properly and if separation and reattachment points are found within the resolution of the experimental information. Also, the massive separation near the point of stall is examined in order to more accurately evaluate the lift coefficient curve in that region. Lift, drag, and moment coefficients are computed and compared to experiment.

Potapczuk, Mark G.↗