Search NASA⌕ Search

SEARCH · Search NASA

Results for “Acceleration methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Aerospace plane guidance using time-scale decomposition - A geometric approach

A method is proposed for developing the necessary guidance logic to steer single-stage vehicles into orbit. The minimum-fuel ascent problem is first considered to analyze the effects of dynamic pressure, acceleration, and heating constraints on guidance systems to thereby develop the guidance logic. The optimal solution consists of behavior with two time scales, and the control law is used to develop near-optimal guidance. The solution uses the slow manifold to delineate the control for minimum-fuel reduced-order trajectory and a separate control for tracking the optimal reduced-order trajectory. A family of fast manifolds is then employed to resolve the tracking problem via the feedback linearization methodology from nonlinear geometric control theory. The two-time-scale decomposition is found to produce a near-optimal ascent by tracking the applicable state-constraint boundary, as well as to simplify the control-design task.

Van Buren, Mark A.↗

Explosive component acceptance tester using laser interferometer technology

Acceptance testing of explosive components requires a reliable and simple to use testing method that can discern less than optimal performance. For hot-wire detonators, traditional techniques use dent blocks or photographic diagnostic methods. More complicated approaches are avoided because of their inherent problems with setup and maintenance. A recently developed tester is based on using a laser interferometer to measure the velocity of flying plates accelerated by explosively actuated detonators. Unlike ordinary interferometers that monitor displacement of the test article, this device measures velocity directly and is commonly used with non-spectral surfaces. Most often referred to as the VISAR technique (Velocity Interferometer System for Any Reflecting Surface), it has become the most widely-accepted choice for accurate measurement of velocity in the range greater than 1 mm/micro-s. Traditional VISAR devices require extensive setup and adjustment and therefore are unacceptable in a production-testing environment. This paper describes a new VISAR approach which requires virtually no adjustments, yet provides data with accuracy comparable to the more complicated systems. The device, termed the Fixed-Cavity VISAR, is currently being developed to serve as a product verification tool for hot-wire detonators and slappers. An extensive data acquisition and analysis computer code was also created to automate the manipulation of raw data into final results.

Wickstrom, Richard D.↗

A three dimensional multigrid multiblock multistage time stepping scheme for the Navier-Stokes equations

A general multiblock method for the solution of the three-dimensional, unsteady, compressible, thin-layer Navier-Stokes equations has been developed. The convective and pressure terms are spatially discretized using Roe's flux differencing technique while the viscous terms are centrally differenced. An explicit Runge-Kutta method is used to advance the solution in time. Local time stepping, adaptive implicit residual smoothing, and the Full Approximation Storage (FAS) multigrid scheme are added to the explicit time stepping scheme to accelerate convergence to steady state. Results for three-dimensional test cases are presented and discussed.

Elmiligui, Alaa↗

Massively Parallel and Scalable Implicit Time Integration Algorithms for Structural Dynamics

Explicit codes are often used to simulate the nonlinear dynamics of large-scale structural systems, even for low frequency response, because the storage and CPU requirements entailed by the repeated factorizations traditionally found in implicit codes rapidly overwhelm the available computing resources. With the advent of parallel processing, this trend is accelerating because of the following additional facts: (a) explicit schemes are easier to parallelize than implicit ones, and (b) explicit schemes induce short range interprocessor communications that are relatively inexpensive, while the factorization methods used in most implicit schemes induce long range interprocessor communications that often ruin the sought-after speed-up. However, the time step restriction imposed by the Courant stability condition on all explicit schemes cannot yet be offset by the speed of the currently available parallel hardware. Therefore, it is essential to develop efficient alternatives to direct methods that are also amenable to massively parallel processing because implicit codes using unconditionally stable time-integration algorithms are computationally more efficient when simulating the low-frequency dynamics of aerospace structures.

Farhat, Charbel↗

Ground Test of the Urine Processing Assembly for Accelerations and Transfer Functions

This viewgraph presentation gives an overview of the ground test of the urine processing assembly for accelerations and transfer functions. Details are given on the test setup, test data, data analysis, analytical results, and microgravity assessment. The conclusions of the tests include the following: (1) the single input/multiple output method is useful if the data is acquired by tri-axial accelerometers and inputs can be considered uncorrelated; (2) tying coherence with the matrix yields higher confidence in results; (3) the WRS#2 rack ORUs need to be isolated; (4) and future work includes a plan for characterizing performance of isolation materials.

Houston, Janice↗

Stiffness and Damping Coefficient Estimation of Compliant Surface Gas Bearings for Oil-Free Turbomachinery

Foil gas bearings are a key technology in many commercial and emerging Oil-Free turbomachinery systems. These bearings are non-linear and have been difficult to analytically model in terms of performance characteristics such as load capacity, power loss, stiffness and damping. Previous investigations led to an empirically derived method, a rule-of-thumb, to estimate load capacity. This method has been a valuable tool in system development. The current paper extends this tool concept to include rules for stiffness and damping coefficient estimation. It is expected that these rules will further accelerate the development and deployment of advanced Oil-Free machines operating on foil gas bearings

DellaCorte, Christopher↗

Accelerated Monte Carlo Simulation for Safety Analysis of the Advanced Airspace Concept

Safe separation of aircraft is a primary objective of any air traffic control system. An accelerated Monte Carlo approach was developed to assess the level of safety provided by a proposed next-generation air traffic control system. It combines features of fault tree and standard Monte Carlo methods. It runs more than one order of magnitude faster than the standard Monte Carlo method while providing risk estimates that only differ by about 10%. It also preserves component-level model fidelity that is difficult to maintain using the standard fault tree method. This balance of speed and fidelity allows sensitivity analysis to be completed in days instead of weeks or months with the standard Monte Carlo method. Results indicate that risk estimates are sensitive to transponder, pilot visual avoidance, and conflict detection failure probabilities.

Thipphavong, David↗

Three-Dimensional Modeling of the Solar Wind: From the Coronal Base to the Outer Heliosphere

We have developed a global fully three-dimensional magnetohydrodynamic solar wind model for the region that extends from the coronal base to 100 AU. The simulation domain consists of tree spherical shell subdomains with computational boundaries between them placed at 20 solar radii and 0.3 AU. The location of the first boundary ensures that the flow at the boundary is both supersonic and super-Alfvenic. A steady-state solution in the innermost (coronal) region is obtained by the time-relaxation method. The solution uses a tilted dipole model or solar magnetograms as the boundary condition at the coronal base and includes a flux of Alfven waves in the WKB approximation which provide additional acceleration for the coronal outflow in the open field regions. The intermediate region solution is constructed by the integration of steady-state equations along radius using a marching scheme. The outer region solution (0.3-100 AU) is obtained again by the time relaxation and takes into account turbulence transport and heating as well as heating, flow deceleration, and other effects due to the interstellar pickup protons treated as a separate fluid. We use the model to simulate the global steady-state structure of the solar wind from the coronal base to the heliospheric boundary and compare the results with Ulysses and Voyager observations.

Usmanov, A. V↗

Stiffness and Damping Coefficient Estimation of Compliant Surface Gas Bearings for Oil-Free Turbomachinery

Foil gas bearings are a key technology in many commercial and emerging oilfree turbomachinery systems. These bearings are nonlinear and have been difficult to analytically model in terms of performance characteristics such as load capacity, power loss, stiffness, and damping. Previous investigations led to an empirically derived method to estimate load capacity. This method has been a valuable tool in system development. The current work extends this tool concept to include rules for stiffness and damping coefficient estimation. It is expected that these rules will further accelerate the development and deployment of advanced oil-free machines operating on foil gas bearings.

Della-Corte, Christopher↗

Modeling and Impact of Solar Energetic Particles in the Heliosphere and Geospace

Understanding the radiation environment due to solar energetic particles in the heliosphere and the Earth’s magnetosphere is a challenging and practically important task. Exposure to energetic particles often leads to malfunctions and unexpected failures of electronics onboard spacecraft. The most vulnerable are exploratory missions when outside of the Earth’s magnetosphere. Geomagnetic field deflects Solar Energetic Particles (SEPs) moving through geospace though some of these particles propagate to LEO and have a high penetrating capability, thus producing significant radiation hazards for human spaceflight. Solar energetic particles also have an essential effect on the composition and dynamics of the Earth’s atmosphere. Precipitating SEPs enhance the atmospheric concentration of NOx and HOx, which play a crucial role in the ozone balance in the middle atmosphere by destroying odd oxygen through catalytic reactions. Numerical modeling of the radiation environment due to SEPs in the inner heliosphere and geospace is a multifold problem. That includes simulating 1) solar wind dynamics and the interplanetary magnetic field, 2) global modeling of the Earth’s magnetosphere, and 3) modeling transport and acceleration of SEPs in the inner heliosphere and geospace. The lecture will outline the key physical processes that control the behavior of SEPs in the heliosphere and geospace, along with the contemporary numerical methods used for their modeling. It will primarily focus on describing the SEP population in geospace across different altitudes, ranging from Low Earth Orbit (LEO) through Medium Earth Orbit (MEO) and Geostationary Orbit (GEO), up to the magnetopause, while considering the realistic geomagnetic field. Additionally, the lecture will cover how the SEP population in geospace varies in response to geomagnetic activity. This includes the temporal trapping of SEPs in geospace and the reduction of the rigidity cutoff during geomagnetic storms.

solar energetic particles↗

Improved Creep Measurements for Ultra-High Temperature Materials

Our team has developed a novel approach to measuring creep at extremely high temperatures using electrostatic levitation (ESL). This method has been demonstrated on niobium up to 2300 C, while ESL has melted tungsten (3400 C). This method has been extended to lower temperatures and higher stresses and applied to new materials, including a niobium-based superalloy, MASC. High-precision machined spheres of the sample are levitated in the NASA MSFC ESL, a national user facility and heated with a laser. The samples are rotated with an induction motor at up to 30,000 revolutions per second. The rapid rotation loads the sample through centripetal acceleration, producing a shear stress of about 60 MPa at the center, causing the sample to deform. The deformation of the sample is captured on high-speed video, which is analyzed by machine-vision software from the University of Massachusetts. The deformations are compared to finite element models to determine the constitutive constants in the creep relation. Furthermore, the non-contact method exploits stress gradients within the sample to determine the stress exponent in a single test.

Hyers, Robert W.↗

LIFT CONTROL DURING ATMOSPHERE ENTRY FROM SUPERCIRCULAR VELOCITY

This paper presents an analysis of a guidance method which uses a reference trajectory. The four state variables needed to prescribe the trajectory are used as follows : Velocity is made the independent variable, and the errors in the rate-of-climb, acceleration, and range variables away from the reference are used to govern the lift. A linearized form of the motion equations is used to show that this represents a third-order control system. First- and second- order control terms (rate of climb and acceleration inputs) are shown to determine the entry corridor depth by stabilizing the trajectory so that the vehicle does not skip back out of the atmosphere or does not exceed a specified acceleration limit. The destabilizing effect that range input (the third-order control term) can have is illustrated and the results indicate that a low value of range input gain must be used at the high supercircular velocities while larger values of range input gain can be used at lower velocities. The usable corridor depth and range capability with this guidance system are demonstrated for a lifting capsule (L/D = 0.5). The practical applications of this system are illustrated with a fixed trim configuration wherein roll angle is used to command the desired lift. The results show that the guidance system requires only one reference trajectory for abort entry conditions as well as for entry conditions near the design values.

Atmosphere↗

An engineering optimization method with application to STOL-aircraft approach and landing trajectories

An optimization method has been developed that computes the optimal open loop inputs for a dynamical system by observing only its output. The method reduces to static optimization by expressing the inputs as series of functions with parameters to be optimized. Since the method is not concerned with the details of the dynamical system to be optimized, it works for both linear and nonlinear systems. The method and the application to optimizing longitudinal landing paths for a STOL aircraft with an augmented wing are discussed. Noise, fuel, time, and path deviation minimizations are considered with and without angle of attack, acceleration excursion, flight path, endpoint, and other constraints.

Jacob, H. G.↗

Unified nonlinear approach to both weak and strong-interaction problems

The numerical results are obtained for heat transfer, skin-friction, and viscous interaction induced pressure for a step-wise accelerated flat plate in hypersonic flow. In the unified approach here the results are presented for both weak and strong-interaction problems without employing any linearization scheme. With the help of the numerical method used in this work an accurate prediction of wall shear can be made for the problems with plate velocity changes of 1% or larger. The obtained results indicate that the transient contribution to the induced pressure for helium is greater than that for air.

Gupta, R. N.↗

Space processing convection evaluation - G-jitter convection of confined fluids in low gravity

G-jitter convection, caused by time-varying accelerations imparted on a heated container of fluid in low gravity, is investigated analytically. The mathematical model used is constructed from the Navier-Stokes equations which are solved with a finite-difference method on a digital computer. Results are presented for typical space processing configurations and anticipated g-jitter levels, with emphasis on sounding rocket applications. The calculations indicate that g-jitter can cause significant temperature oscillations, increase or decrease local heat transfer and produce oscillatory convective flow patterns. These factors can have significant effects on important processes such as crystal growth (banding, for example) and separation techniques.

Spradley, L. W.↗

Alternate approaches to vibration and shock analysis using NASTRAN

A method that derives an approximate equivalent static load to a base excitation shock analysis is described. The transient analysis in the current level of NASTRAN, level 16, does not directly provide for either input acceleration forcing functions or enforced boundary displacement. In the suggested alternate analysis format, equivalent force input functions are applied to the constrained locations by using the artifice of placing a large mass, with respect to the total system mass, at the desired acceleration input points. This shortcut static analysis approach is presented to approximate the expensive and time consuming dynamics analysis approach to the base excitation shock analysis.

Denver, R. E.↗

Use of adaptive walls in 2D tests

A new method for computing the wall effects gives precise answers to some questions arising in adaptive wall concept applications: length of adapted regions, fairings with up and downstream regions, residual misadjustments effects, reference conditions. The acceleration of the iterative process convergence and the development of an efficient technology used in CERT T2 wind tunnels give in a single run the required test conditions. Samples taken from CAST 7 tests demonstrate the efficiency of the whole process to obtain significant results with considerations of tridimensional case extension.

Archambaud, J. P.↗

Observing large-scale temporal variability of ocean currents by satellite altimetry - With application to the Antarctic circumpolar current

A new method is developed for studying large-scale temporal variability of ocean currents from satellite altimetric sea level measurements at intersections (crossovers) of ascending and descending orbit ground tracks. Using this method, sea level time series can be constructed from crossover sea level differences in small sample areas where altimetric crossovers are clustered. The method is applied to Seasat altimeter data to study the temporal evolution of the Antarctic Circumpolar Current (ACC) over the 3-month Seasat mission (July-October 1978). The results reveal a generally eastward acceleration of the ACC around the Southern Ocean with meridional disturbances which appear to be associated with bottom topographic features. This is the first direct observational evidence for large-scale coherence in the temporal variability of the ACC. It demonstrates the great potential of satellite altimetry for synoptic observation of temporal variability of the world ocean circulation.

Fu, L.-L.↗