Search NASA⌕ Search

SEARCH · Search NASA

Results for “Catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Impact of Catalyst Ink Dispersing Methodology on Fuel Cell Performance Using in-Situ X-ray Scattering

This work presents a study of the effects of ultrasonic dispersing methodology and time on catalyst agglomerate size in polymer electrolyte membrane fuel cell catalyst ink dispersions. Cathode catalyst inks were prepared and characterized to elucidate the influences of ultrasonic dispersing method and time on catalyst ink particle size and CCL electrochemical properties. In situ ultra-small-, small-, and wide-angle X-ray scattering analyses were used to study the impact of ultrasonication time and methodology on changes in the agglomerate, aggregate, and particle size and distribution during the dispersing process. Ex-situ transmission electron microscopy was also used to investigate the particle size of these inks. Fuel cell membrane electrode assemblies (MEAs) were prepared and tested to determine the influence of ink properties on CCL electrochemical properties, including the electrochemical active surface area, mass activity, H2/air polarization curves, and oxygen mass-transport resistances. It was found that a combination of brief tip sonication followed by bath sonication was most effective at breaking up agglomerates, leading to maximum catalyst activity and MEA performance. Extended tip sonication was found to be too aggressive and resulted in detachment of the platinum nanoparticles from the carbon black support, which decreased electrochemical surface area and MEA performance. Quantification of oxygen mass transport resistance showed that electrodes with large catalyst agglomerates due to insufficient sonication had a higher non-Fickian (pressure independent) than properly dispersed catalyst. Through correlation of the performance with catalyst particle size, the desired CCL structure was proposed, which will provide insight into dispersion strategies for lab-scale spray coating and other processing techniques, as well as for large-scale manufacturing.

30 DIRECT ENERGY CONVERSION↗

Deciphering the Mechanistic Role of Individual Oxide Phases and Their Combinations in Supported Mn–Na 2 WO 4 Catalysts for Oxidative Coupling of Methane

Oxidative coupling of methane (OCM) is an attractive direct route for upgrading methane to valuable chemicals. In this study, Temporal Analysis of Products (TAP) and steady state experiments are conducted to understand the role of individual oxide phases and their combinations in supported Mn-Na 2 WO 4 /SiO 2 catalysts for OCM. The results from TAP transient kinetic studies indicate that Mn plays an important role in promoting gas phase oxygen activation, while NaO x /SiO 2 and WO x /SiO 2 are relatively inert towards gas phase oxygen and methane activation. However, the supported catalyst combining Na and W in the form Na 2 WO 4 show enhanced gas phase oxygen activation exhibiting a much lower oxygen activation energy (148 kJ/mol) and enhanced activity toward methane activation as compared to the individual supported oxide catalysts. Addition of Mn to Na 2 WO 4 /SiO 2 further decreases the oxygen activation energy by 40 kJ/mol. Moreover, methane activation is also enhanced with CH 3 as the main intermediate but, with increasing Mn content, more CH 2 intermediates are observed. Different forms of oxygen (both dioxygen and atomic) are detected on the catalyst surface using isotopic pump/probe pulsing and their distribution is found to depend on the catalyst composition. An optimal Mn content in the Na 2 WO 4 /SiO 2 catalyst system is needed to enhance the amount of dioxide surface species (e.g., superoxide 16 O 2 - or peroxide 16 O 2 2- ) associated with the Na 2 WO 4 leading to high C 2 selectivity for OCM. When the Mn content is too high, the larger MnOx domains are shown to contribute to the formation of higher concertation of monoxide surface species that lead to nonselective OCM pathways. This insight from transient kinetic characterization using TAP combined with conventional steady state studies, provides a deeper understanding of the role of individual oxide phases and their combination on supported catalysts toward the formation of intermediate surface species and their impact on the OCM reaction mechanism. This knowledge is critical toward designing superior catalyst formulations for OCM.

10 SYNTHETIC FUELS↗

Design and modification of zeolite capsule catalyst, a confined reaction field, and its application in one-step isoparaffin synthesis from syngas

Four kinds of zeolite capsule catalyst with different crystallization conditions were prepared and utilized for the middle isoparaffin direct synthesis via Fischer-Tropsch synthesis (FTS) reaction. Characterization results exhibited that these capsule catalysts had a compact, integral H-ZSM-5 shell. In FTS reactions on these zeolite capsule catalysts, hydrocarbons of C11+ were totally suppressed, accompanied by a sharp anti-Anderson-Schultz-Flory (ASF) law product distribution. The selectivity of light isoparaffin was improved obviously, but with the increase of the olefin's selectivity. Two-stage isoparaffin synthesis reaction, using the combination of zeolite capsule catalyst with hydrogenation catalyst of Pd/SiO{sub 2} in a single reactor as dual-bed catalyst, was also conducted for converting the residual olefins produced by the single zeolite capsule catalyst. Dependent on the palladium role of hydrogenation and hydrogen spillover, almost all the olefins effused from the first stage of zeolite capsule catalyst were hydrogenated, mostly converted to isoparaffin. The selectivity of isoparaffin in the final products was increased markedly as expected. 10 refs., 7 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

The Effect of Time dealumination and Solvent Concentration in Synthesis of Zeolite Catalyst and Catalytic Test for DiEthyl Ether Production Process

Ethanol is an alternative energy, but its has three distinct disadvantages as a transportation fuel. Its availability is currently limited, and it has a lower volumetric heating value and a lower Reid vapour pressure (RVP) than gasoline. This paper focuses for this disadvantages and to solve this problem can do with converts ethanol to DiEthyl Ether product. This research produced DiEthyl Ether by ethanol dehydration process with zeolite as catalyst. The catalyst synthesis from natural material from District Gunung Kidul, Indonesia. The catalyst produced with dealumination, neutralization, drying and calcination processes. The zeolite catalyst was analysed of Si/Al, X-ray Diffraction and specific surface area. The catalyst product then used for ethanol dehydration to produce DiEthyl Ether. The results shown the biggest surface area is 184,52 m{sup 2}/gram at catalyst production at 10 hours for time dealumination. The crystallite of catalyst product is similar like shown at diffractogram of XRD analysis. The ratio Si/Al biggest is 313.7 that obtaining at catalyst production with 7 hours for time dealumination. The catalytic test use fixed bed reactor with 1 inci diameter and ethanol fermentation both as feed. The operation condition is 150 deg. C at temperature and atmosphere pressure. The compounds product in liquid phase are diethyl ether, methanol and water.

36 MATERIALS SCIENCE↗

Catalytic decomposition of tar derived from wood waste pyrolysis using Indonesian low grade iron ore as catalyst

Low grade iron ore can be used as an alternative catalyst for bio-tar decomposition. Compared to other catalysts, such as Ni, Rd, Ru, Pd and Pt, iron ore is cheaper. The objective of this research was to investigate the effect of using low grade iron ore as catalyst for tar catalytic decomposition in fixed bed reactor. Tar used in this experiment was pyrolysis product of wood waste while the catalyst was Indonesian low grade iron ore. The variables studied were temperatures between 500 – 600 °C and catalyst weight between 0 – 40 gram. The first step, tar was evaporated at 450 °C to produce tar vapor. Then, tar vapor was flowed to fixed bed reactor filled low grade iron ore. Gas and tar vapor from reactor was cooled, then the liquid and uncondensable gas were analyzed by GC/MS. The catalyst, after experiment, was weighed to calculate total carbon deposited into catalyst pores. The results showed that the tar components that were heavy and light hydrocarbon were decomposed and cracked within the iron ore pores to from gases, light hydrocarbon (bio-oil) and carbon, thus decreasing content tar in bio-oil and increasing the total gas product. In conclusion, the more low grade iron ore used as catalyst, the tar content in the liquid decrease, the H{sup 2} productivity increased and calorimetric value of bio-oil increased.

09 BIOMASS FUELS↗

Co-Pt core-shell nanostructured catalyst prepared by selective chemical vapor pulse deposition of Pt on Co as a cathode in polymer electrolyte fuel cells

A new type of PtCo/C catalyst for use as a cathode in polymer electrolyte fuel cells was prepared by selective chemical vapor pulse deposition (CVPD) of Pt on the surface of Co. The activity of the prepared catalyst for oxygen reduction was higher than that of a catalyst prepared by sequential impregnation (IMP) with the two metallic components. This catalytic activity difference occurs because the former catalyst has smaller Pt crystallites that produce stronger Pt-Co interactions and have a larger Pt surface area. Consequently, the CVPD catalyst has a great number of Co particles that are in close contact with the added Pt. The Pt surface was also electronically modified by interactions with Co, which were stronger in the CVPD catalyst than in the IMP catalyst, as indicated by X-ray diffraction, X-ray photoemission spectroscopy, and cyclic voltammetry measurements of the catalysts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transition Metal Catalyzed Hydroarylation of Multiple Bonds: Exploration of Second Generation Ruthenium Catalysts and Extension to Copper Systems

Catalysts provide foundational technology for the development of new materials and can enhance the efficiency of routes to known materials. New catalyst technologies offer the possibility of reducing energy and raw material consumption as well as enabling chemical processes with a lower environmental impact. The rising demand and expense of fossil resources has strained national and global economies and has increased the importance of accessing more efficient catalytic processes for the conversion of hydrocarbons to useful products. The goals of the research are to develop and understand single-site homogeneous catalysts for the conversion of readily available hydrocarbons into useful materials. A detailed understanding of these catalytic reactions could lead to the development of catalysts with improved activity, longevity and selectivity. Such transformations could reduce the environmental impact of hydrocarbon functionalization, conserve energy and valuable fossil resources and provide new technologies for the production of liquid fuels. This project is a collaborative effort that incorporates both experimental and computational studies to understand the details of transition metal catalyzed C-H activation and C-C bond forming reactions with olefins. Accomplishments of the current funding period include: (1) We have completed and published studies of C-H activation and catalytic olefin hydroarylation by TpRu{l_brace}P(pyr){sub 3}{r_brace}(NCMe)R (pyr = N-pyrrolyl) complexes. While these systems efficiently initiate stoichiometric benzene C-H activation, catalytic olefin hydroarylation is hindered by inhibition of olefin coordination, which is a result of the steric bulk of the P(pyr){sub 3} ligand. (2) We have extended our studies of catalytic olefin hydroarylation by TpRu(L)(NCMe)Ph systems to L = P(OCH{sub 2}){sub 3}CEt. Thus, we have now completed detailed mechanistic studies of four systems with L = CO, PMe{sub 3}, P(pyr){sub 3} and P(OCH{sub 2}){sub 3}CEt, which has provided a comprehensive understanding of the impact of steric and electronic parameters of 'L' on the catalytic hydroarylation of olefins. (3) We have completed and published a detailed mechanistic study of stoichiometric aromatic C-H activation by TpRu(L)(NCMe)Ph (L = CO or PMe{sub 3}). These efforts have probed the impact of functionality para to the site of C-H activation for benzene substrates and have allowed us to develop a detailed model of the transition state for the C-H activation process. These results have led us to conclude that the C-H bond cleavage occurs by a {sigma}-bond metathesis process in which the C-H transfer is best viewed as an intramolecular proton transfer. (4) We have completed studies of Ru complexes possessing the N-heterocyclic carbene IMes (IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene). One of these systems is a unique four-coordinate Ru(II) complex that catalyzes the oxidative hydrophenylation of ethylene (in low yields) to produce styrene and ethane (utilizing ethylene as the hydrogen acceptor) as well as the hydrogenation of olefins, aldehydes and ketones. These results provide a map for the preparation of catalysts that are selective for oxidative olefin hydroarylation. (5) The ability of TpRu(PMe{sub 3})(NCMe)R systems to activate sp{sup 3} C-H bonds has been demonstrated including extension to subsequent C-C bond forming steps. These results open the door to the development of catalysts for the functionalization of more inert C-H bonds. (6) We have discovered that Pt(II) complexes supported by simple nitrogen-based ligands serve as catalysts for the hydroarylation of olefins. Given the extensive studies of Pt-based catalytic C-H activation, we believe these results will provide an entry point into an array of possible catalysts for hydrocarbon functionalization.

08 HYDROGEN↗

IN SITU Device for Real-Time Catalyst Deactivation Measurements

SCR catalyst management has become an important operations and maintenance activity for coal-fired utility boilers in the United States. To facilitate this activity, a method to determine Catalyst Activity in situ is being developed. This report describes the methodology and presents the results of a two ozone season demonstration conducted at Alabama Power Company's Gorgas Unit 10 during the 2005 and 2006 ozone seasons. The results showed that the in situ measurements are in good agreement with the laboratory measurements and the technique has some advantages over the traditional laboratory method of determining Catalyst Activity and Reactor Potential. SCR Performance is determined by the overall Reactor Potential (the product of the Catalyst Activity and the available surface area per unit of flue gas). The in situ approach provides a direct measurement of Reactor Potential under actual operating conditions, whereas laboratory measurements of Catalyst Activity need to be coupled with estimates of catalyst pluggage and flue gas flowrate in order to assess Reactor Potential. The project also showed that the in situ activity results can easily be integrated into catalyst management software to aid in making informed catalyst decisions.

01 COAL, LIGNITE, AND PEAT↗

Characterization of MoVTeNbO x catalysts during oxidation reactions using in situ/operando techniques: A review

The domestic fossil feedstock in recent years is shifting towards light hydrocarbons due to abundance of shale gas from hydraulic fracturing. This shift induces a need for greater flexibility in both new and existing processing plants to produce consumer products (polymers, paints, lubricants, etc.) from new feedstocks. The oxidative catalytic reactions operate at milder conditions than the processing of feedstocks through steam cracking. The conversion of light feedstocks (C3 and shorter hydrocarbons) to high value chemicals through highly selective catalysts in the presence of oxygen plays a crucial role in eliminating wastes, reducing greenhouse gas emissions and lowering market prices. Among all catalysts for light hydrocarbon processing through oxidation reactions, bulk mixed metal oxides such as MoVTe(Sb)NbO x catalysts are the most promising due to their performance under favorable reaction conditions (temperature, pressure, etc). Here, state-of-the-art in situ/operando techniques along with transient kinetics can revolutionize the development of catalysts by providing information about the nature of active sites, intermediates and kinetics under realistic industrial conditions. Only through detailed understanding of these catalyst behaviors can new synthesis methods be developed that will improve reactivity, selectivity and lifetimes of these catalysts. In this review, dynamic changes of this mixed oxide catalyst during the reaction (such as changes in surface composition, oxidation states, acidity, etc) are discussed mainly from knowledge and insights obtained from these in situ/operando approaches. The most common oxidation reactions driven by the MoVTeNbO x catalysts and studied under operando/in situ conditions to be discussed here are: (1) oxidative dehydrogenation of light alkanes (ethane and propane), (2) propane ammoxidation to acrylonitrile and (3) selective oxidation of propane to acrylic acid.

03 NATURAL GAS↗

In Situ UV-Visible Assessment of Iron-Based High-Temperature Water-Gas Shift Catalysts Promoted with Lanthana: An Extent of Reduction Study

Here, the extent of reduction of unsupported iron-based high-temperature water-gas shift catalysts with small (<5 wt %) lanthana contents was studied using UV-visible spectroscopy. Temperature- programmed reduction measurements showed that lanthana content higher than 0.5 wt % increased the extent of reduction to metallic Fe, while 0.5 wt % of lanthana facilitated the reduction to Fe 3 O 4 . In situ measurements on the iron oxide catalysts using mass and UV-visible spectroscopies permitted the quantification of the extent of reduction under temperature-programmed reduction and high-temperature water-gas shift conditions. The oxidation states were successfully calibrated against normalized absorbance spectra of visible light using the Kubelka-Munk theory. The normalized absorbance relative to the fully oxidized Fe 2 O 3 increased as the extent of reduction increased. XANES suggested that the average bulk iron oxidation state during the water-gas shift reaction was Fe +2.57 for the catalyst with no lanthana and Fe +2.54 for the catalysts with 1 wt % lanthana. However, the UV-vis spectra suggest that the surface oxidation state of iron would be Fe +2.31 for the catalyst with 1 wt % lanthana if the oxidation state of iron in the catalyst with 0 wt % lanthana were Fe +2.57 . The findings of this paper emphasize the importance of surface sensitive UV-visible spectroscopy for determining the extent of catalyst reduction during operation. Furthermore, the paper highlights the potential to use bench-scale UV-visible spectroscopy to study the surface chemistry of catalysts instead of less-available synchrotron X-ray radiation facilities.

36 MATERIALS SCIENCE↗

Relating FTS Catalyst Properties to Performance

During the reporting period June 23, 2011 to August 31, 2013, CAER researchers carried out research in two areas of fundamental importance to the topic of cobalt-based Fischer-Tropsch Synthesis (FTS): promoters and stability. The first area was research into possible substitute promoters that might be used to replace the expensive promoters (e.g., Pt, Re, and Ru) that are commonly used. To that end, three separate investigations were carried out. Due to the strong support interaction of γ-Al2O3 with cobalt, metal promoters are commonly added to commercial FTS catalysts to facilitate the reduction of cobalt oxides and thereby boost active surface cobalt metal sites. To date, the metal promoters examined have been those up to and including Group 11. Because two Group 11 promoters (i.e., Ag and Au) were identified to exhibit positive impacts on conversion, selectivity, or both, research was undertaken to explore metals in Groups 12 - 14. The three metals selected for this purpose were Cd, In, and Sn. At a higher loading of 25%Co on alumina, 1% addition of Cd, In, or Sn was found to-on average-facilitate reduction by promoting a heterogeneous distribution of cobalt consisting of larger lesser interacting cobalt clusters and smaller strongly interacting cobalt species. The lesser interacting species were identified in TPR profiles, where a sharp low temperature peak occurred for the reduction of larger, weakly interacting, CoO species. In XANES, the Cd, In, and Sn promoters were found to exist as oxides, whereas typical promoters (e.g., Re, Ru, Pt) were previously determined to exist in an metallic state in atomic coordination with cobalt. The larger cobalt clusters significantly decreased the active site density relative to the unpromoted 25%Co/Al2O3 catalyst. Decreasing the cobalt loading to 15%Co eliminated the large non-interacting species. The TPR peak for reduction of strongly interacting CoO in the Cd promoted catalyst occurred at a measurably lower temperature than in the unpromoted catalyst. Nevertheless, the Co clusters remained slightly larger, on average, in comparison with the unpromoted 15%Co/Al2O3 reference catalyst. None of the promoted catalysts (i.e., with Cd, In, or Sn) exhibited surface Co0 site densities higher than that of the unpromoted catalyst. In activity testing, the activities were even much lower than what was expected from the H2-TPD results. Two possible explanations were proposed: (1) the promoters may be located on the surfaces of cobalt particles, blocking surface Co0 but being able to desorb hydrogen or (2) the promoters may facilitate Co oxidation during FTS, as previously observed by Huffman and coworkers when K was added to cobalt catalysts.

Zirconia↗

A simple synthesis method of sulfur-free Fe-N-C catalyst witih high ORR activity

To try to deconvolute which factors affect the activity and durability of metal-nitrogen-carbon (M-N-C) type non-precious catalysts for oxygen reduction reaction (ORR), M-N-C catalysts based on ion chloride, polyaniline (PANI) and Ketjen Black carbon support were synthesized using different synthetic conditions. The catalysts were characterized electrochemically and tested as cathodes for Hydrogen fuel cells. PANI is usually chemically oxidative polymerized using ammonium persulfate (APS) as oxidant. To eliminate sulfur in the synthesized catalysts, a simple synthesis method using ion chloride as oxidant for aniline polymerization was developed. Two different aniline polymerization conditions led to very different product morphologies. Synthesized at low initial proton concentration, the final product was composed of dense micrometer sized particles. A decomposable salt was found to be able to prohibit PANI cross linking during the drying and annealing process and thus led to porous product. The porous catalyst has much higher ORR activity than the dense product due to more accessible active sites. Synthesized at high proton concentration, the catalyst appeared to be porous. The decomposable salt treatment did not make too much improvement in the porous structure and electrochemical activity. However, fuel cell testing using air as cathode feeder indicates that the salt treatment improves mass transfer in the cathode layer. Catalyst synthesized using this simple method has performance comparable to our state-of-the art catalyst synthesized in a much more complicated procedure. The factor that sulfur sources are completely eliminated in the synthesis suggests that sulfur is not necessary for the ORR catalysis activity.

30 DIRECT ENERGY CONVERSION↗

Decontamination of Tritiated-Water Using Super-hydrophobic Pt-Catalyst Synthesized with Water-in-Supercritical CO{sub 2}

Tritium, {sup 3}H, is one of the hydrogen isotopes, created in coolant of a fission reactor and to be utilized as fuel for nuclear fusion reactors. Since a large amount of tritium will be contained in a fusion reactor or in a fission reactor, a small fraction of the tritiated chemical species, in most cases, tritiated water, may leak to the environment. Tritium is, however, a radioactive isotope whose specific radioactivity is 4 x 10{sup 17} Bq kg{sup -1}, and easy to transfer in human body, its confinement is very important from the safety aspect. One of the problems of tritium confinement and decontamination of tritiated chemical species is related with necessity of its isotope separation from lighter hydrogen isotopes, {sup 2}H and {sup 1}H. Most of principles for the isotope separations are based on fractionations of isotopes in different chemical species. A large fractionation for hydrogen isotopes is observed in a chemical exchange of hydrogen atoms between water, Q{sub 2}O, and hydrogen gas, Q{sub 2}, where 'Q' denotes one of the hydrogen isotopes. Heavier isotopes are enriched significantly into Q{sub 2}O rather than Q{sub 2}. Therefore practical method of tritium removal would be established by hydrogen isotope separation with chemical exchange of water and hydrogen gas. At first, we prepared a catalyst, by reducing Pt{sup 4+} in reversed micelles where the reducing agent, aqueous solution of sodium tetra borohydrate, NaBH{sub 4} was also contained in reversed micelles prepared separately. In this situation, micelles containing Pt{sup 4+} and reducing reagent collided and produced Pt nanoparticles, which were expected to be impregnated in the hydrophobic structure after depressurization. After this type of earlier experiment we determined a mass of impregnated Pt by total dissolution of gauze with aqua regia followed by concentration measurement of Pt with ICP-AES. We performed several trials, unfortunately, however, the mass of Pt deposited on the gauze was very small to detect, and this approach turns to be not successful. As the second approach, we utilize CO{sub 2} soluble Pt precursor, CODMe{sub 2}Pt purchased from Sigma-Aldrich Co. and H{sub 2} gas as reducing agent, which could be completely mixed with SC-CO{sub 2}. This system was well-known for Pt particle formation by auto-catalytic growth. The second approach was aiming at increasing Pt amount deposited in the gauze. This approach was successful in increasing Pt amount, but the Pt particle size also increased to be more than 50 nm, which was not suitable for catalyst. Finally, we synthesized the catalyst by the following procedure: firstly, a reducing agent of NaBH{sub 4} was deposited on the nano-textured hydrophobic layer on the gauze. This step was realized by forming reversed micelles of aqueous NaBH{sub 4} solution using a surfactant AOT and a co-surfactant 2,2,3,3,4,4,5,5,-octafluoro-1-pentanol (F-pentanol) in SC-CO{sub 2}. This system of surfactant combination of AOT and F-pentanol has been found to work successfully in recent studies. In the second step, the gauze was contacted with CODMe{sub 2}Pt dissolved in SC-CO{sub 2} to synthesize seeds of Pt particles for the auto-catalytic reaction proceeding by CODMe{sub 2}Pt with hydrogen. The seeds were formed by the reaction between deposited NaBH{sub 4} and CODMe{sub 2}Pt in SC-CO{sub 2}. The physical characterization of this catalyst was performed by SEM-EDS. By this procedure, the Pt hydrophobic catalyst where Pt nanoparticle of 10 nm in diameter was locally deposited in the nano-textured layer was successfully prepared. Hydrophobicity after the chemical Pt deposition was tested by measurement of water absorbed on the gauze and the catalyst performance was evaluated by {sup 1}H{sup 2}H formation through the scrambling reaction from {sup 1}H{sub 2} and {sup 2}H{sub 2} and the reaction was successfully observed. We demonstrated a new hydrophobic catalyst preparation using SC-CO{sub 2} effectively. We can conclude that the approach of creating Pt nanoparticles in SC-CO{sub 2} and depositing them in the super-hydrophobic structure on the metal surface is useful for synthesizing hydrophilic catalysts for the hydrogen isotope separation.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Mercury oxidation over a vanadia-based selective catalytic reduction catalyst

The process of the reaction among elemental mercury (Hg{sup 0}) and reactive flue gas components across the selective catalytic reduction (SCR) catalyst was studied in a laboratory-scale reactor. Prepared vanadia-based SCR catalysts were characterized and analyzed to understand the potential reaction pathways. Mercury oxidation was observed when pro-exposure of the SCR catalyst to HCl, followed by passing through Hg{sup 0}/N{sub 2} in the absence of gas-phase HCl. At testing conditions, Hg{sup 0} was found to desorb from the catalyst surface by adding HCl to the gas stream, which implies that HCl adsorption onto the SCR catalyst is strong relative to the mercury. Surface analysis verified the absorption of HCl onto the SCR catalysts, and the potential reaction pathways were proposed. Indeed, the monomeric vanadyl sites on the catalyst surface were found to be responsible for the adsorption of both Hg{sup 0} and HCl, which means they are active for mercury oxidation. Furthermore, the detailed Langmuir-Hinshelwood mechanism was proposed to explain the mercury oxidation on the SCR catalyst, where reactive Cl generated from adsorbed HCl reacts with adjacent Hg{sup 0}. 44 refs., 10 figs.

01 COAL, LIGNITE, AND PEAT↗

Theoretical Studies in Heterogenous Catalysis: Towards a Rational Design of Novel Catalysts for Hydrodesulfurization and Hydrogen Production

Traditionally, knowledge in heterogeneous catalysis has come through empirical research. Nowadays, there is a clear interest to change this since millions of dollars in products are generated every year in the chemical and petrochemical industries through catalytic processes. To obtain a fundamental knowledge of the factors that determine the activity of heterogeneous catalysts is a challenge for modern science since many of these systems are very complex in nature. In principle, when a molecule adsorbs on the surface of a heterogeneous catalyst, it can interact with a large number of bonding sites. It is known that the chemical properties of these bonding sites depend strongly on the chemical environment around them. Thus, there can be big variations in chemical reactivity when going from one region to another in the surface of a heterogeneous catalyst. A main objective is to understand how the structural and electronic properties of a surface affect the energetics for adsorption processes and the paths for dissociation and chemical reactions. In recent years, advances in instrumentation and experimental procedures have allowed a large series of detailed works on the surface chemistry of heterogeneous catalysts. In many cases, these experimental studies have shown interesting and unique phenomena. Theory is needed to unravel the basic interactions behind these phenomena and to provide a general framework for the interpretation of experimental results. Ideally, theoretical calculations based on density-functional theory have evolved to the point that one should be able to predict patterns in the activity of catalytic surfaces. As in the case of experimental techniques, no single theoretical approach is able to address the large diversity of phenomena occurring on a catalyst. Catalytic surfaces are usually modeled using either a finite cluster or a two-dimensionally periodic slab. Many articles have been published comparing the results of these two approaches. An important advantage of the cluster approach is that one can use the whole spectrum of quantum-chemical methods developed for small molecules with relatively minor modifications. On the other hand, the numerical effort involved in cluster calculations increases rather quickly with the size of the cluster. This problem does not exist when using slab models. Due to the explicit incorporation of the periodicity of the crystal lattice through the Bloch theorem, the actual dimension of a slab calculation depends only on the size of the unit cell. In practical terms, the slab approach is mainly useful for investigating the behavior of adsorbates at medium and high coverages. Very large unit cells are required at the limit of low to zero coverage, or when examining the properties and chemical behavior of isolated defect sites in a surface. In these cases, from a computational viewpoint, the cluster approach can be much more cost effective than the slab approach. Slab and cluster calculations can be performed at different levels of sophistication: semi-empirical methods, simple ab initio Hartree-Fock, ab initio post-Hartree-Fock (CI, MP2, etc), and density functional theory. Density-functional (DF) based calculations frequently give adsorption geometries with a high degree of accuracy and predict reliable trends for the energetics of adsorption reactions. This article provides a review of recent theoretical studies that deal with the behavior of novel catalysts used for hydrodesulfurization (HDS) reactions and the production of hydrogen (i.e. catalytic processes employed in the generation of clean fuels). These studies involve a strong coupling of theory and experiment. A significant fraction of the review is focused on the importance of size-effects and correlations between the electronic and chemical properties of catalytic materials. The article begins with a discussion of results for the desulfurization of thiophene on metal carbides and phosphides, systems which have the potential to become the next generation of industrial HDS catalysts. Then, systematic studies concerned with the hydrogen-evolution reaction (HER) on extended surfaces, organometallic complexes and enzymes are presented. Finally, the reasons for the high catalytic activity of Au-CeO{sub 2} and Cu-CeO{sub 2} in the production of hydrogen through the water-gas shift reaction (CO + H{sub 2}O {yields} H{sub 2} + CO{sub 2}) are analyzed. It is shown that theoretical methods are very valuable tools for helping in the rational design of heterogeneous catalysts.

02 PETROLEUM↗

Oxygen evolution co-catalysts at fuel cell cathodes for degradation mitigation during simulated start up shut down procedures

We herein report a methodology which uses an oxygen evolution reaction (OER) co-catalyst, such as Ru and RuO2 together with a highly active ORR catalyst. The co-catalyst is applied in the cathode layer with loadings of 0.035 - 0.04 mgRu/cm2 and is uniformly mixed with the ORR catalyst prior to electrode preparation. Oxygen evolution catalysts (OER) like Ru/C and RuO2/C mixed with ORR catalysts enhance the oxidation of water/OH- to oxygen and therefore provide significant protection of other redox active species at high cathode potentials Our measurements indicate that loss in ECSA, carbon support and activity for ORR catalyst combined with OER was significantly reduced as compared to an unprotected catalyst layer.

30 DIRECT ENERGY CONVERSION↗

Low‐PGM and PGM‐Free Catalysts for Proton Exchange Membrane Fuel Cells: Stability Challenges and Material Solutions

Abstract Fuel cells as an attractive clean energy technology have recently regained popularity in academia, government, and industry. In a mainstream proton exchange membrane (PEM) fuel cell, platinum‐group‐metal (PGM)‐based catalysts account for ≈50% of the projected total cost for large‐scale production. To lower the cost, two materials‐based strategies have been pursued: 1) to decrease PGM catalyst usage (so‐called low‐PGM catalysts), and 2) to develop alternative PGM‐free catalysts. Grand stability challenges exist when PGM catalyst loading is decreased in a membrane electrode assembly (MEA)—the power generation unit of a PEM fuel cell—or when PGM‐free catalysts are integrated into an MEA. More importantly, there is a significant knowledge gap between materials innovation and device integration. For example, high‐performance electrocatalysts usually demonstrate undesired quick degradation in MEAs. This issue significantly limits the development of PEM fuel cells. Herein, recent progress in understanding the degradation of low‐PGM and PGM‐free catalysts in fuel cell MEAs and materials‐based solutions to address these issues are reviewed. The key factors that degrade the MEA performance are highlighted. Innovative, emerging material concepts and development of low‐PGM and PGM‐free catalysts are discussed.

Du, Lei↗

Surface Engineering of 3D Gas Diffusion Electrodes for High‐Performance H 2 Production with Nonprecious Metal Catalysts

Abstract In this work, a methodology is demonstrated to engineer gas diffusion electrodes for nonprecious metal catalysts. Highly active transition metal phosphides are prepared on carbon‐based gas diffusion electrodes with low catalyst loadings by modifying the O/C ratio at the surface of the electrode. These nonprecious metal catalysts yield extraordinary performance as measured by low overpotentials (51 mV at −10 mA cm −2 ), unprecedented mass activities (>800 A g −1 at 100 mV overpotential), high turnover frequencies (6.96 H 2 s −1 at 100 mV overpotential), and high durability for a precious metal‐free catalyst in acidic media. It is found that a high O/C ratio induces a more hydrophilic surface directly impacting the morphology of the CoP catalyst. The improved hydrophilicity, stemming from introduced oxyl groups on the carbon electrode, creates an electrode surface that yields a well‐distributed growth of cobalt electrodeposits and thus a well‐dispersed catalyst layer with high surface area upon phosphidation. This report demonstrates the high‐performance achievable by CoP at low loadings which facilitates further cost reduction, an important part of enabling the large‐scale commercialization of non‐platinum group metal catalysts. The fabrication strategies described herein offer a pathway to lower catalyst loading while achieving high efficiency and promising stability on a 3D electrode.

Sanchez, Joel↗