Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coating processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Electrodialysis through nafion membranes coated with polyelectrolyte multilayers yields >99% pure monovalent ions at high recoveries

Separation of monovalent and multivalent ions is important in processes ranging from water softening to recycling of Li. Previous studies show that cation-exchange membranes coated with multilayer polyelectrolyte films exhibit monovalent/divalent ion selectivities as high as 1000 in electrodialysis (ED) under ideal conditions with low ion recoveries. This work shows that even at 60-80% monovalent-ion recoveries, ED through Nafion membranes coated with protonated poly(allylamine)/poly(4-styrenesulfonate) multilayers can separate equimolar K + and Mg 2+ or Li + and Mg 2+ to give 99.5% pure monovalent ion. Moreover, the use of a low-volume receiving phase allows ED to concentrate the monovalent ion. Typical current efficiencies are around 70% for these separations. Selectivities appear to increase when the membrane-coating procedure uses a higher polyelectrolyte concentration in the deposition solution. Because the limiting current declines with ED time due to depletion of the monovalent ion in the source phase, use of a gradually decreasing applied current enhances current efficiency compared to ED at a constant high current. Further, the membranes also show Li + /Mg 2+ selectivities around 100 when Mg 2+ is in a 20-fold excess in the source phase at an ionic strength of 0.6 M, but selectivity decreases at even higher ionic strengths.

15 GEOTHERMAL ENERGY↗

Freestanding high-aspect-ratio gold masks for low-energy, phase-based x-ray microscopy

High-resolution, x-ray phase contrast microscopy, a key technique with promising potential in biomedical imaging and diagnostics, is based on narrow-slit high-aspect-ratio gold gratings. Here we present the development, fabrication details, and experimental testing of the freestanding 10 μm thick gold membrane masks with an array of 0.9–1.5 μm void slit apertures for a novel low-energy x-ray microscope. The overall mask size is 4 mm × 4 mm, with a grating pitch of 7.5 μm, 6.0–6.6 μm wide gold bars are supported by 3 μm wide crosslinks at 400 μm intervals. The fabrication process is based on gold electroplating into a silicon mold coated with various thin films to form a voltage barrier, plating base, and sacrificial layer, followed by the mold removal to obtain the freestanding gold membrane with void slit apertures. We discuss key aspects for the materials and processes, including gold structures homogeneity, residual stresses, and prevention of collapsing of the grid elements. We further demonstrate the possibility to obtain high-resolution, high contrast 2D images of biological samples using an incoherent, rotating anode x-ray tube.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanical Properties and Characterization of Coated SiC Fuel Cladding

SiC fiber-reinforced SiC matrix (SiC{sub f}-SiC) composites continue to undergo process modifications to address remaining concerns for Light Water Reactor (LWR) fuel cladding. The critical concerns include the radiolysis-assisted hydrothermal corrosion and the loss of hermeticity during normal operation. Coating technologies are being developed to provide a solution to both problems with no or minimum modification to the SiC{sub f}-SiC clad structures. Several barrier coating options have been considered and examined for these purposes. A comprehensive screening program is being developed to determine their feasibility in LWR environments before the coated fuel claddings are further advanced toward the ideal 'drop-in' replacements for the aging LWR fleet. There have been several coating technologies proposed. All are based on chromium and zirconium interacting with the coolant because they have a proven performance history. However, it is difficult to deposit these elements in reduced form (Zr{sup 0}, Cr{sup 0}) due to the high enthalpy associated with the stable oxide. The Cr chemical deposition techniques use electrochemical 'hard chrome' reduction of Cr{sup 3+/6+} protected by chelating ligands in solution. The collaborative partner for this endeavor is NEO Knoxville, LLC, and two types of hard chrome systems (trivalent and hard chrome) are being investigated. There are also two feasible vapor techniques previously demonstrated: commercial physical vapor deposition (PVD) methods and an experimental, proprietary vacuum plasma spray (VPS) by Plasma Processes, LLC. Both of these use Zr{sup 0} and Cr{sup 0} in high vacuum systems. In total, eight coatings and four bond coats are being evaluated. In mid-2016, these were inserted into a reactor and a characterization program is underway. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

D and D decision model and mobile application for selection of fixative, strippable coating, and decontamination gel products - 15696

Deactivation and decommissioning (D and D) is the process of taking an active/excess/abandoned facility to a final disposition end state. D and D presents unique hazards that must be addressed from a safety, programmatic, environmental, and technological standpoint. This definition is especially applicable to Savannah River Site's 235-F facility. The facility was constructed in the 1950's as part of the weapons complex materials production and fabrication. The most significant quantities of residual contamination remaining in 235-F building is in the form of Plutonium-238. A Decision Model was created using MatLab to work hand-in-hand with a product list containing commercially available D and D products. This model was created to further enhance and accelerate the decontamination process. It is envisioned that D and D engineers will be able to use this Decision Model in the field via a mobile device. It allows the user to select four inputs to match their situation. The model searches the database and returns the products that fit the criteria selected by the user. This Decision Model will be made available in a web-based application and as a mobile application to ensure end users can access it when needed. The MatLab code recognizes what position in the text box is selected and then this input is converted to the corresponding string. The string is then compared with the information in the product list in the specified column in order to reduce processing time. Then the products that contain the string inputted are displayed on the table and are separated by category. The web-based version of the model will receive three specified criteria and sub-criteria from the user and update the table with products that fit each criteria. A web-based version of this Decision Model is under way and will be set up on the D and D KM-IT platform. There will be two versions of this mobile application: for devices with internet connection and for those that do not have internet connection. This will ensure end users have access to the Decision application at any time or place during the D and D process. A mobile version of the model will also be developed in the near future.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Integrated laser ablation-dropletProbe-mass spectrometry for absolute drug quantitation, metabolite detection, and distribution in tissue

Rationale: Spatially resolved and accurate quantitation of drug-related compounds in tissue is a much-needed capability in drug discovery research. In this work, application of an integrated laser ablation-dropletProbe-mass spectrometry surface sampling system (LADP-MS) is reported, which achieved absolute quantitation of propranolol measured from <500 × 500 μm thin tissue samples. Methods: Mouse liver and kidney thin tissue sections were coated with parylene C and analyzed for propranolol by a laser ablation/liquid extraction workflow. Non-coated adjacent sections were microdissected for validation and processed using standard bulk tissue extraction protocols. High-performance liquid chromatography with positive ion mode electrospray ionization tandem mass spectrometry was applied to detect the drug and its metabolites. Results: Absolute propranolol concentration in ~500 × 500 μm tissue regions measured by the two methods agreed within ±8% and had a relative standard deviation within ±17%. Quantitation down to ~400 × 400 μm tissue regions was shown, and this resolution was also used for automated mapping of propranolol and phase II hydroxypropranolol glucuronide metabolites in kidney tissue. Conclusions: This study exemplifies the capabilities of integrated laser ablation-dropletProbe-mass spectrometry (LADP-MS) for high resolution absolute drug quantitation analysis of thin tissue sections. This capability will be valuable for applications needing to quantitatively understand the spatial distribution of small molecules in tissue.

47 OTHER INSTRUMENTATION↗

Oxidation of glucose to glycolic acid using oxygen and pyrolyzed spent Li-ion battery electrode material as catalyst

A search for non-noble catalysts for biomass processing led to the discovery that pyrolyzed electrode coating of spent Li-ion batteries can be used as an excellent catalyst for oxidation of D-glucose to glycolic acid. New no/low-cost catalyst was prepared by pyrolyzing black electrode coatings of 18,650 Li-ion cells from a spent DELL 1525 laptop battery at 600 ºC. Catalyst was characterized using SEM, EDX and X-ray and was shown to contain lithium nickel manganese cobalt oxide (Li a Ni b Mn c Co d O e ) on carbon with Ni: Mn: Co 4.12: 2.10: 1.50. Here, the catalytic activity of this material was evaluated for oxidation of D-glucose in aq. NaOH and water; glycolic, tartaric, malic, succinic and 2-hydroxybutaric acid were identified as key degradation products. The highest glycolic acid yield of 94% was obtained for oxidation of D-glucose under 3.4 Atm. oxygen, 120 °C, 2.0 h in 0.5 M aq. NaOH using 10 g catalyst/mol glucose.

25 ENERGY STORAGE↗

Influence of annealing conditions on the formation of hollow Al{sub 2}O{sub 3} microspheres studied by in situ ESEM

The transformation of Al microparticles into hollow and broken Al{sub 2}O{sub 3} microspheres was investigated by in situ environmental scanning electron microscopy (ESEM) up to 1150 °C under different heating rates and 120 Pa of gas atmospheres. Slow heating rates (2 °C min{sup −1}) resulted in a better coverage of the particles shell than with fast heating rates (20 °C min{sup −1}) that delayed the threshold temperature at which the particles opened. Above this threshold, the amount of opened spheres increased with heating rate, with the coarser particles opening more than the small ones. It appeared that inert atmospheres (He–4%H{sub 2}) increased the temperature at which the particles transformed, while air and pure oxygen tended to lower it. In contrast, the temperature interval was larger and was size-dependent when using water vapour. Irrespective of the gas atmosphere, opening of the spheres allowed molten Al to flow out from the core and aluminise the substrate while leaving behind a top coat of hollow alumina spheres. - Graphical abstract: (a) Effect of the increasing of oxidizing power of the gas atmosphere and of the heating rate. The former provokes in a better surface coverage of the Al microparticles while the latter results in thinner alumina shells. (b) The supply of Al to the substrate and the interdiffusion mechanisms result in an aluminised layer underneath the top coat of Al microparticles. - Highlights: • Transformations of Al microparticles with temperature demonstrated by in-situ SEM • The gas atmospheres changed the temperature of transformation of the Al microparticles. • The Al supply from the microparticles aluminized the superalloy substrate. • A potential thermal barrier coating was thus obtained in a single step process.

36 MATERIALS SCIENCE↗

In Situ Surface Reconstruction via Lithium Residue Regulation for Direct Recycling of Ni-Rich Cathodes

Surface stability is crucial for the long cycling performance of Ni-rich cathodes, as it dictates and governs side reactions, preserves crystal integrity, and mitigates capacity degradation during cycling. For spent Ni-rich cathodes targeted for one-step direct recycling, constructing a robust and stable surface is particularly challenging because prior cycling induces severe structural and morphological degradation. Here, in this study, we introduce an in situ surface reconstruction strategy that converts surface lithium residues into a protective layer via a direct liquid-phase coating with ammonium dihydrogen phosphate (ADP). During the process, residual lithium remaining after the hydrothermal relithiation is removed, while a conformal lithium phosphate (Li 3 PO 4 , LPO) layer is formed to act as both a chemical barrier and a structural stabilizer. This dual function enhances cycling stability and rate capability in regenerated cathodes, and the approach is applicable to various Ni-rich compositions including spent LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) and scrap LiNi 0.866 Mn 0.066 Co 0.05 Al 0.018 O 2 (NCMA). Its scalability and compositional versatility make it a promising route for sustainable regeneration of high-performance cathode materials.

36 MATERIALS SCIENCE↗

Organic photovoltaic cells with controlled polarization sensitivity

In this study, we demonstrate linearly polarized organic photovoltaic cells with a well-controlled level of polarization sensitivity. The polarized devices were created through the application of a large uniaxial strain to the bulk heterojunction poly(3-hexylthiophene):Phenyl-C61-butyric acid methyl ester (P3HT:PCBM) film and printing the plastically deformed active layer onto a PEDOT:PSS and indium tin oxide coated glass substrate. The P3HT:PCBM layer is processed such that it is able to accommodate high strains (over 100%) without fracture. After printing the strained films, thermal annealing is used to optimize solar cell performance while maintaining polarization sensitivity. A dichroic ratio and short circuit current ratio of ≈6.1 and ≈1.6 were achieved, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of vertically aligned α−MoO{sub 3} nanoflakes by using a facile PVD route

In this report, we synthesize vertically aligned molybdenum trioxide (α−MoO{sub 3}) nanoflakes (NFs) with high aspect ratio (height/thickness >15) on the cobalt coated glass substrates by the plasma assisted sublimation process, employing Mo metal strip as a sublimation source. The effect of substrate temperature, nature of substrate as well as the geometry of the sublimation source (Mo-strip) have been investigated on the morphological, structural and optical properties of the grown NFs, keeping plasma parameters as fixed. The surface morphology, crystalline structure and optical properties of MoO{sub 3} NFs have been studied systematically by using scanning electron microscope (SEM), transmission electron microscope (TEM) with selected area electron diffraction (SAED), X-ray diffractometer, and IR- spectroscopy. The experimental observations endorse that the characteristics of MoO{sub 3} NFs are strongly depend on substrate temperature, substrate nature as well as geometry of Mo-strip. All the observed results are well in consonance with each other.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoelectrochemical and photosensing behaviors of hydrothermally grown ZnO nanorods

ZnO nanorods have been grown on indium-tin-oxide coated glass substrates by a low cost chemical process. Current-voltage characteristics have been studied using ZnO nanorods as photoanode in an electrochemical cell. The flat band voltage shift and depletion width of ZnO nanorods/electrolyte interface have been estimated from Mott-Schottky (MS) characteristics. The electrochemical impedance measurements have been carried out to study the charge transport mechanism at the semiconductor-electrolyte interface under dark and white light (100 mW/cm{sup 2}) illumination. The doping concentration of nanorods has been extracted from MS plot. Photoresponse behavior of ZnO nanorods is found to be enhanced than seed layers with the incident of white light. Spectral dependent photovoltage of ZnO nanorods has been carried out using monochromatic light of wavelength 250–600 nm. The photopotential recovery time has been estimated for nanorods and seed layers. The stability of ZnO nanorods as a photoanode has been investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Collection strategy, inner morphology, and size distribution of dust particles in ASDEX Upgrade

The dust collection and analysis strategy in ASDEX Upgrade (AUG) is described. During five consecutive operation campaigns (2007–2011), Si collectors were installed, which were supported by filtered vacuum sampling and collection with adhesive tapes in 2009. The outer and inner morphology (e.g. shape) and elemental composition of the collected particles were analysed by scanning electron microscopy. The majority of the ~50?000 analysed particles on the Si collectors of campaign 2009 contain tungsten—the plasma-facing material in AUG—and show basically two different types of outer appearance: spheroids and irregularly shaped particles. By far most of the W-dominated spheroids consist of a solid W core, i.e. solidified W droplets. A part of these particles is coated with a low-Z material; a process that seems to happen presumably in the far scrape-off layer plasma. In addition, some conglomerates of B, C and W appear as spherical particles after their contact with plasma. By far most of the particles classified as B-, C- and W-dominated irregularly shaped particles consist of the same conglomerate with varying fraction of embedded W in the B–C matrix and some porosity, which can exceed 50%. The fragile structures of many conglomerates confirm the absence of intensive plasma contact. Both the ablation and mobilization of conglomerate material and the production of W droplets are proposed to be triggered by arcing. The size distribution of each dust particle class is best described by a log-normal distribution allowing an extrapolation of the dust volume and surface area. The maximum in this distribution is observed above the resolution limit of 0.28 µm only for the W-dominated spheroids, at around 1 µm. The amount of W-containing dust is extrapolated to be less than 300 mg on the horizontal areas of AUG.

99 GENERAL AND MISCELLANEOUS↗

Characterization and Optimization of Skipper CCDs for the SOAR Integral Field Spectrograph

We present results from the characterization and optimization of Skipper charge-coupled devices (CCDs) for use in a focal plane prototype for the Southern Astrophysical Research Integral Field Spectrograph (SIFS). We tested eight Skipper CCDs and selected six for SIFS based on performance results. The Skipper CCDs are 6k × 1k, 15 μm pixels, thick, fully depleted, p-channel devices that have been thinned to ~250 μm, backside processed, and treated with an anti-reflective coating. We demonstrate a single-sample readout noise of <4.3 e - rms pixel -1 in all amplifiers. We optimize the readout sequence timing to achieve a readout noise of 0.5 e - rms pixel -1 after 74 non-destructive measurements, which can be accomplished in a region covering 5% of the detector area in a readout time of <4 minutes. We demonstrate single-photon-counting in all 24 amplifiers (four amplifiers per detector) with a readnoise of σ N ~ 0.18 e - rms pixel -1 after N samp = 400 samples, and we constrain the degree of nonlinearity to be ≲1% at low signal levels (0 e - to 50 e - ). Clock-induced charge (CIC) remains an important issue when the Skipper CCD is configured to provide a large full-well capacity. We achieve a CIC rate of <1.45 × 10 -3 e - pixel -1 frame -1 for a full-well capacity of ~900 e - , which increases to a CIC rate of ~3 e - pixel -1 frame -1 for full-well capacities ~40,000-65,000 e - . We also perform conventional CCD characterization measurements such as charge transfer inefficiency (3.44 × 10 -7 on average), dark current (~2 × 10 -4 e - pixel -1 s -1 ), photon transfer curves, cosmetic defects (<0.45% “bad” pixels), and charge diffusion (point-spread function < 7.5 μm) to verify that these properties are consistent with expectations from conventional p-channel CCDs used for astronomy. Furthermore, we provide the first measurements of the brighter-fatter effect and absolute quantum efficiency (≳80% between 450 and 980 nm; ≳90% between 600 and 900 nm) using Skipper CCDs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Field electron emission from a carbon-covered iridium tip

The formation of a carbon coating on an iridium field-emission electron emitter by benzene vapor pyrolysis has been studied. Processes on an emitting tip differ from those studied earlier on flat metal surfaces. The resulting coating either represents a monoatomic graphene film on the flat faces of the emitter or consists of graphene clusters. The field electron emission is localized on the edges and in the corners of a faceted graphite outgrowth. After alkali metals are adsorbed on the carbon coating, emissions from the flat faces anomalously grows and localizes on graphene-coated faces with alkali atoms present on the surface and under the graphene film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Dipole Polarization of an Emitting Surface on Autoemission Thresholds of a Multitip Silicon Cathode Matrices

Regularities of changes in the structural-phase composition and morphological and field-emission characteristics of surface-structured silicon wafers with various types of conductivity have been studied. It is shown that the use of a fluorocarbon plasma in the process of structuring, along with a carbon mask coating, allows obtaining preset autoemission currents of silicon cathode matrices when the external electric-field strength varies in a wide range irrespectively of the change of the gain factors of the fields of the emitting protrusions. The dominant role of dipole polarization in autoemission of electrons in surface-modified silicon structures has been established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Addressing Spacer Channel Resistances in MCDI Using Porous and Pliable Ionic Conductors

Membrane capacitive deionization (MCDI) is a unique electrochemical separations platform that allows for energy recovery during electrode regeneration. Similar to other electrochemical separation technologies producing deionized water (e.g. electrodialysis), ohmic resistances in the spacer channel significantly hampers the performance and energy efficiency of the process. This work devised a series of ionomer coated nylon mesh nets to address spacer channel resistances in MCDI. Under constant current operation, the ionomer coated nylon meshes displayed a 300 mV lower cell voltage rise during deionization while sustaining the same deionization rate. Furthermore, energy recovery was improved by 1.4x to 5.5x depending on the saline feed concentration. The lower cell voltage rise during deionization combined with the greater energy recovery with ionomer coated meshes resulted in energy normalized adsorbed salt (ENAS) values that were 2x to 3x greater. Addressing the spacer channel resistances in MCDI allowed for 8% to 19% increase in current density without the cell voltage exceeding 1.6 V—the upper bound set for mitigating parasitic reactions. Operating at higher current density leads to smaller MCDI units for a given deionization requirement and has implications for reducing the capital costs of the MCDI unit.

Palakkal, Varada Menon (ORCID:0000000317038323)↗

Role of defects in laser-induced modifications of silica coatings and fused silica using picosecond pulses at 1053 nm: II Scaling laws and the density of precursors

Here, we investigate the role of defects in laser-induced damage of fused silica and of silica coatings produced by e-beam and PIAD processes which are used in damage resistant, multi-layer dielectric, reflective optics. We perform experiments using 1053 nm, 1–60 ps laser pulses with varying beam size, number of shots, and pulse widths in order to understand the characteristics of defects leading to laser-induced damage. This pulse width range spans a transition in mechanisms from intrinsic material ablation for short pulses to defect-dominated damage for longer pulses. We show that for pulse widths as short as 10 ps, laser-induced damage properties of fused silica and silica films are dominated by isolated absorbers. The density of these precursors and their fluence dependence of damage initiation suggest a single photon process for initial energy absorption in these precursors. Higher density precursors that initiate close to the ablation threshold at shorter pulse widths are also observed in fused silica, whose fluence and pulse width scaling suggest a multiphoton initiation process. We also show that these initiated damage sites grow with subsequent laser pulses. We show that scaling laws obtained in more conventional ways depend on the beam size and on the definition of damage for ps pulses. For this reason, coupling scaling laws with the density of precursors are critical to understanding the damage limitations of optics in the ps regime.

36 MATERIALS SCIENCE↗