Search NASA⌕ Search

SEARCH · Search NASA

Results for “Comparative visualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Designing Unmanned Aerial Survey Monitoring Program to Assess Floating Litter Contamination

Monitoring marine contamination by floating litter can be particularly challenging since debris are continuously moving over a large spatial extent pushed by currents, waves, and winds. Floating litter contamination have mostly relied on opportunistic surveys from vessels, modeling and, more recently, remote sensing with spectral analysis. This study explores how a low-cost commercial unmanned aircraft system equipped with a high-resolution RGB camera can be used as an alternative to conduct floating litter surveys in coastal waters or from vessels. The study compares different processing and analytical strategies and discusses operational constraints. Collected UAS images were analyzed using three different approaches: (i) manual counting (MC), using visual inspection and image annotation with object counts as a baseline; (ii) pixel-based detection, an automated color analysis process to assess overall contamination; and (iii) machine learning (ML), automated object detection and identification using state-of-the-art convolutional neural network (CNNs). Our findings illustrate that MC still remains the most precise method for classifying different floating objects. ML still has a heterogeneous performance in correctly identifying different classes of floating litter; however, it demonstrates promising results in detecting floating items, which can be leveraged to scale up monitoring efforts and be used in automated analysis of large sets of imagery to assess relative floating litter contamination.

Almeida, Sílvia (ORCID:0000000320636826)↗

Investigation of the Kline-Fogleman airfoil section for rotor blade applications

Wind tunnel tests of a wedgeshaped airfoil with sharp leading edge and a spanwise step were conducted. The airfoil was tested with variations of the following parameters: (1) Reynolds number, (2) step location, (3) step shape, (4) apex angle, and (5) with the step on either the upper or lower surface. The results are compared with a flat plate and with wedge airfoils without a step having the same aspect ratio. Water table tests were conducted for flow visualization and it was determined that the flow separates from the upper surface at low angles of attack. The wind tunnel tests show that the lift/drag ratio of the airfoil is lower than for a flat plate and the pressure data show that the airfoil derives its lift in the same manner as a flat plate.

Lumsdaine, E.↗

Validation of the Passenger Ride Quality Apparatus (PRQA) for simulation of aircraft motions for ride-quality research

The NASA passenger ride quality apparatus (PRQA), a ground based motion simulator, was compared to the total in flight simulator (TIFS). Tests were made on PRQA with varying stimuli: motions only; motions and noise; motions, noise, and visual; and motions and visual. Regression equations for the tests were obtained and subsequent t-testing of the slopes indicated that ground based simulator tests produced comfort change rates similar to actual flight data. It was recommended that PRQA be used in the ride quality program for aircraft and that it be validated for other transportation modes.

Bigler, W. B., II↗

LAPR: An experimental aircraft pushbroom scanner

A three band Linear Array Pushbroom Radiometer (LAPR) was built and flown on an experimental basis by NASA at the Goddard Space Flight Center. The functional characteristics of the instrument and the methods used to preprocess the data, including radiometric correction, are described. The radiometric sensitivity of the instrument was tested and compared to that of the Thematic Mapper and the Multispectral Scanner. The radiometric correction procedure was evaluated quantitatively, using laboratory testing, and qualitatively, via visual examination of the LAPR test flight imagery. Although effective radiometric correction could not yet be demonstrated via laboratory testing, radiometric distortion did not preclude the visual interpretation or parallel piped classification of the test imagery.

Wharton, S. W.↗

LAPR - An experimental pushbroom scanner

A three-band Linear Array Pushbroom Radiometer (LAPR) was built and flown on an experimental basis by NASA, at the Goddard Space Flight Center. The functional characteristics of the instrument and the methods used to preprocess the data, including radiometric correction, are described. The radiometric sensitivity of the instrument was tested and compared to that of the Thematic Mapper and the Multispectral Scanner. The radiometric correction procedure was evaluated quantitatively, using laboratory testing, and qualitatively, by visual examination of the LAPR test flight imagery. Although effective radiometric correction could not yet be demonstrated by laboratory testing, radiometric distortion did not preclude the visual interpretation or classification of the test imagery.

Wharton, S. W.↗

Space Shuttle Orbiter - Reusable surface insulation subsystem thermal performance

The thermal performance of the reusable surface insulation (RSI) subsystem consisting of silica tiles, silicone coated nylon felt insulation, and ceramic cloth gap fillers and thermal barriers is discussed. Thermal response predictions for the components are compared with measured flight data, which indicates that the RSI thermal performance can meet or exceed design requirements for the majority of the RSI. Visual inspections and the maximum temperature conditions observed in structural components after data acquisition suggest that the flight environment was not as severe as the worst case preflight prediction.

Dotts, R. L.↗

Synchronized voltage contrast display analysis system

An apparatus and method for comparing internal voltage potentials of first and second operating electronic components such as large scale integrated circuits (LSI's) in which voltage differentials are visually identified via an appropriate display means are described. More particularly, in a first embodiment of the invention a first and second scanning electron microscope (SEM) are configured to scan a first and second operating electronic component respectively. The scan pattern of the second SEM is synchronized to that of the first SEM so that both simultaneously scan corresponding portions of the two operating electronic components. Video signals from each SEM corresponding to secondary electron signals generated as a result of a primary electron beam intersecting each operating electronic component in accordance with a predetermined scan pattern are provided to a video mixer and color encoder.

Johnston, M. F.↗

On the evolution of accretion disc flow in cataclysmic variables. III - Outburst properties of constant and uniform-alpha model discs

Attention is given to the stability and evolution of some simple accretion disk models in which the viscosity is prescribed by an ad hoc, uniform-alpha model. Emphasis is placed on systems in which the mass input rate from the secondary to the disk around the primary is assumed to be constant, although initial calculations with variable mass input rates are also performed. Time-dependent visual magnitude light curves constructed for cataclysmic binaries with a range of disk size, primary mass and mass input rate, and viscosity magnitude, are compared with the observed properties of various cataclysmic variable subclasses. The results obtained indicate that the observational differences between novae and dwarf novae may be due to mass input rate differences. The present models can reproduce the gross observational features of U-Gem-type dwarf nova outbursts.

Lin, D. N. C.↗

A generic expert system for materials processing in space

A generic expert system is described for inspecting materials processed in space (MPS). The system may be applied, with the appropriate knowledge base, to any of the nondestructive testing methods (NDT) which are appropriate to MPS. Regardless of the method being used, the inspection process consists of three tasks: (1) signal or image processing of the NDT output and feature extraction, (2) interpretation of features in terms of MPS discontinuities, and (3) evaluation of the quality of the MPS based upon industry standards. In contrast to rule based systems, this system represents its knowledge as multidimensional vectors and appropriate functions on them. Currently, the expert system accepts manual input of observed features. Once the expert system has been tested and compared to human expert inspectors, a vision front-end will be developed to complete automation of the expert MPS inspection system, based on visual discontuities. Then the data base will be extended to include a variety of other NDT methods. In addition to functional performance, ease of use was established through menu window driven input as well as flexibility in building, using and modifying data bases for different applications.

Andersen, Kristinn↗

Spectral element simulations of laminar and turbulent flows in complex geometries

Spectral element methods are high-order weighted residual techniques based on spectral expansions of variables and geometry for the Navier-Stokes (NS) and transport equations. Here, practical aspects of these methods and their efficient implementation are examined, and several examples of flows in truly complex geometries are presented. The spectral element discretization for NS equations is introduced, and the convergence of the method is addressed. An efficient data management scheme is discussed in the context of parallel processing computations. The method is validated by comparing the spectral element solutions with the exact eigensolutions for the Orr-Sommerfeld equations in two and three dimensions. Computer-aided flow visualizations are presented for an impulsive flow past a sharp edge wedge. Three-dimensional states of channel flow disrupted by an array of cylindrical eddy promoters are studied, and the results of a direct simulation of the turbulent flow in a plane channel are presented.

Karniadakis, George EM↗

Fin Buffeting Features of an Early F-22 Model

Fin buffeting is an aeroelastic phenomenon encountered by high performance aircraft, especially those with twin vertical tails that must operate at high angles of attack. This buffeting is a concern from fatigue and inspection points of view. To date, the buffet (unsteady pressures) and buffeting (structural response) characteristics of the F-15 and F/A-18 fins have been studied extensively using flow visualization, flow velocity measurements, pressure transducers, and response gages. By means of windtunnel and flight tests of the F-15 and F/A-18, this phenomenon is well studied to the point that buffet loads can be estimated and fatigue life can he increased by structural enhancements to these airframes. However, prior to the present research, data was not available outside the F-22 program regarding fin buffeting on the F-22 configuration. During a test in the Langley Transonic Dynamics Tunnel, flow visualization and unsteady fin surface pressures were recorded for a 13.3%-scale F-22 model at high angles of attack for the purpose of comparing with results available for similar aircraft configurations. Details of this test and fin buffeting are presented herein.

Moses, Robert W.↗

Analytic Guided-Search Model of Human Performance Accuracy in Target- Localization Search Tasks

Current models of human visual search have extended the traditional serial/parallel search dichotomy. Two successful models for predicting human visual search are the Guided Search model and the Signal Detection Theory model. Although these models are inherently different, it has been difficult to compare them because the Guided Search model is designed to predict response time, while Signal Detection Theory models are designed to predict performance accuracy. Moreover, current implementations of the Guided Search model require the use of Monte-Carlo simulations, a method that makes fitting the model's performance quantitatively to human data more computationally time consuming. We have extended the Guided Search model to predict human accuracy in target-localization search tasks. We have also developed analytic expressions that simplify simulation of the model to the evaluation of a small set of equations using only three free parameters. This new implementation and extension of the Guided Search model will enable direct quantitative comparisons with human performance in target-localization search experiments and with the predictions of Signal Detection Theory and other search accuracy models.

Eckstein, Miguel P.↗

Results of International Space Station Vehicle Materials Exposed on MISSE-7B

Materials samples were exposed to the low Earth orbit (LEO) environment as part of the MISSE-7B flight experiment for 18 months. Optical properties, thickness/mass loss, surface elemental analysis, visual and microscopic analysis for surface change are some of the techniques employed in this investigation. Where possible, the MISSE-7B results are compared to analyses from other LEO experiments. ISS materials currently flying on MISSE-8 are also discussed.

Finckenor, Miria M.↗

Comparison of Sedoanalgesia Versus Ultrasound-Guided Supraclavicular Brachial Plexus Block for the Prevention of the Pain During Endovascular Treatment of Dysfunctional Hemodialysis Fistulas

Purpose: Although intravenous sedation and analgesia have been widely used as a first choice to relieve pain during treatment of dysfunctional hemodialysis fistulas by interventional radiology, the sedoanalgesic drugs have a considerable risk of respiratory depression, especially in hemodialysis patients. In this study, we compared the utility and efficiency of ultrasound-guided supraclavicular brachial plexus block versus sedoanalgesia for the prevention of pain during endovascular treatment of dysfunctional hemodialysis fistulas Materials and Methods: Patients were randomized into two groups: ultrasound-guided supraclavicular brachial plexus block (n = 34) or sedoanalgesia group (n = 34). A visual analogue scale from no pain (= 0) to worst pain possible (= 10) was used to assess the pain intensity. Patient and operator satisfaction were graded from 0 to 2: 0, not satisfied at all; 1, partially satisfied; 2, satisfied (very well or complete satisfaction). Both groups were compared in terms of pain scores, patient and operator satisfaction as well as complications. Results: The median pain score was significantly lower in the block group compared to the sedoanalgesia group, 0 (0–4) versus 6 (2–10), p = 0.0001. Patient satisfaction and operator satisfaction were significantly higher in the block group than in the sedoanalgesia group (p = 0.0001). Severe oxygen desaturation occurred in five (14.7%) patients following the administration of sedoanalgesia. No side effects or complications related to block procedure occurred in any patient. Conclusion: Ultrasound-guided supraclavicular brachial plexus block has advantages over the sedoanalgesia during endovascular treatment of dysfunctional hemodialysis fistulas. It can provide safe and efficient analgesia with excellent procedural satisfaction in adult hemodialysis patients. Level of Evidence: Level 1 (randomized controlled trial).

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Summary of the NASA Semi-Span High-Lift Common Research Model Wind Tunnel Test at the QinetiQ 5-Metre Low-Speed Facility

A summary and selected results from experimental testing of the NASA 10% scale semi-span High-Lift Common Research Model (CRM-HL) at the QinetiQ 5m (5mWT) pressurized low-speed wind tunnel are presented. There were many objectives of this test, the primary being to define a set of reference configurations for dissemination and use within the CRM-HL ecosystem, one in the landing configuration and one in the takeoff configuration. A database of force, moment, pressure and surface flow visualization data was collected to support several objectives: aerodynamic sensitivity to high-lift device positioning, Reynolds number effects on configuration selection, isolation of the effects of various components of the reference configuration e.g. landing gear, nacelle, horizontal tail, etc., and limited repeatability data for uncertainty quantification assessment. Some results were compared to limited data collected at the NASA Langley Research Center 14x22 wind tunnel to assess half-model effects and facility differences. Half-model effects were further studied with use of floor blowing to change boundary layer profile and assess effects on model aerodynamics. Flow visualization data were gathered with fluorescent mini-tufts and UV oil. Finally, test time was spend working on the development of new Particle Image Velocimetry (PIV) and Model Deformation Measurement (MDM) capabilities at the 5mWT facility.

Ashley Evans↗

CyclusJS: A Distributed Web-based Fuel Cycle Visual Analytics. Research Performance (Final Report)

The overall aim of the CyclusJS project has been to design novel approaches that support fuel cycle simulations and empower decision-makers and researchers with better tools to compare and contrast results from multiple simulations to understand the landscape of potential outcomes better. In particular, nuclear fuel cycle simulations focus on modeling the nuclear industry and ecosystem at a macroscopic level, and the analysis tools connect such simulations with decision support systems. As a demonstration of the novelty and effectiveness of the proposed approach, we study scenarios for transitioning from one technology, Light Water Reactors (LWR), to a newer Sodium-cooled Fast breeder Reactor (SFR) technology.

60 APPLIED LIFE SCIENCES↗

Mass extinction efficiency and extinction hygroscopicity of ambient PM{sub 2.5} in urban China

The ambient PM{sub 2.5} pollution problem in China has drawn substantial international attentions. The mass extinction efficiency (MEE) and hygroscopicity factor (f(RH)) of PM{sub 2.5} can be readily applied to study the impacts on atmospheric visibility and climate. The few previous investigations in China only reported results from pilot studies and are lack of spatial representativeness. In this study, hourly average ambient PM{sub 2.5} mass concentration, relative humidity, and atmospheric visibility data from China national air quality and meteorological monitoring networks were retrieved and analyzed. It includes 24 major Chinese cities from nine city-clusters with the period of October 2013 to September 2014. Annual average extinction coefficient in urban China was 759.3±258.3 Mm{sup −1}, mainly caused by dry PM{sub 2.5} (305.8.2±131.0 Mm{sup −1}) and its hygroscopicity (414.6±188.1 Mm{sup −1}). High extinction coefficient values were resulted from both high ambient PM{sub 2.5} concentration (68.5±21.7 µg/m{sup 3}) and high relative humidity (69.7±8.6%). The PM{sub 2.5} mass extinction efficiency varied from 2.87 to 6.64 m{sup 2}/g with an average of 4.40±0.84 m{sup 2}/g. The average extinction hygroscopic factor f(RH=80%) was 2.63±0.45. The levels of PM{sub 2.5} mass extinction efficiency and hygroscopic factor in China were in comparable range with those found in developed countries in spite of the significant diversities among all 24 cities. Our findings help to establish quantitative relationship between ambient extinction coefficient (visual range) and PM{sub 2.5} & relative humidity. It will reduce the uncertainty of extinction coefficient estimation of ambient PM{sub 2.5} in urban China which is essential for the research of haze pollution and climate radiative forcing. - Highlights: • Data from air quality and meteorological monitoring networks were combined. • MEE and hygroscopicity of PM{sub 2.5} in China was similar to that of developed countries. • High extinction coefficient was dominated by both high PM{sub 2.5} and relative humidity.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of Delamination Onset and Growth Characterization Methods under Mode I Fatigue Loading

Double-cantilevered beam specimens of IM7/8552 graphite/epoxy from two different manufacturers were tested in static and fatigue to compare the material characterization data and to evaluate a proposed ASTM standard for generating Paris Law equations for delamination growth. Static results were used to generate compliance calibration constants for reducing the fatigue data, and a delamination resistance curve, GIR, for each material. Specimens were tested in fatigue at different initial cyclic GImax levels to determine a delamination onset curve and the delamination growth rate. The delamination onset curve equations were similar for the two sources. Delamination growth rate was calculated by plotting da/dN versus GImax on a log-log scale and fitting a Paris Law. Two different data reduction methods were used to calculate da/dN. To determine the effects of fiber-bridging, growth results were normalized by the delamination resistance curves. Paris Law exponents decreased by 31% to 37% after normalizing the data. Visual data records from the fatigue tests were used to calculate individual compliance constants from the fatigue data. The resulting da/dN versus GImax plots showed improved repeatability for each source, compared to using averaged static data. The Paris Law expressions for the two sources showed the closest agreement using the individually fit compliance data.

Murri, Gretchen B.↗