Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computational Geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Guidelines for effective radiation transport for cable SGEMP modeling

This report describes experiences gained in performing radiation transport computations with the SCEPTRE radiation transport code for System Generated ElectroMagnetic Pulse (SGEMP) applications. SCEPTRE is a complex code requiring a fairly sophisticated user to run the code effectively, so this report provides guidance for analysts interested in performing these types of calculations. One challenge in modeling coupled photon/electron transport for SGEMP is to provide a spatial mesh that is sufficiently resolved to accurately model surface charge emission and charge deposition near material interfaces. The method that has been most commonly used to date to compute cable SGEMP typically requires a sub-micron mesh size near material interfaces, which may be difficult for meshing software to provide for complex geometries. We present here an alternative method for computing cable SGEMP that appears to substantially relax this requirement. The report also investigates the effect of refining the energy mesh and increasing the order of the angular approximation to provide some guidance on determining reasonable parameters for the energy/angular approximation needed for x-ray environments. Conclusions for γ-ray environments may be quite different and will be treated in a subsequent report. In the course of the energy-mesh refinement studies, a bug in the cross-section generation software was discovered that may cause underprediction of the result by as much as an order of magnitude for the test problem studied here, when the electron energy group widths are much smaller than those for the photons. Results will be presented and compared using cross sections generated before and after the fix. We also describe adjoint modeling, which provides sensitivity of the total charge drive to the source energy and angle of incidence, which is quite useful for comparing the effect of changing the source environment and for determining most stressing angle of incidence and source energy. This report focusses on cable SGEMP applications, but many of the conclusions will be directly applicable for box Internal ElectroMagnetic Pulse (IEMP) modeling as well.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Ray trajectories in a torus: An application of MACSYMA to a complex numerical computation

The study of ray trajectories of plasma waves in a torodial geometry using MACSYMA is an example of how symbolic, numerical, and graphical facilities can be used in concert to accomplish a complex computational goal. Computational features of this study which are of particular significance include: the derivation of code (i.e. writing functions to generate program fragments), the use of array functions to simplify the specification of a numerical iteration scheme, and the graphical presentation of the results. Mathematically, this study originates in the solution of a linear inhomogeneous partial differential equation in 3 dimensions by the method of characteristics. While it is possible to describe this equation compactly by using vector notation, and by specifying the spatial variation of the coefficients in terms of intermediate parameters, the transformation of the equation into a form amenable to solution is very tedious. A MACSYMA program is presented for obtaining description of the rf field structure excited by a waveguide located at the edge of a toroidal plasma confinement device.

Kulp, J. L.↗

Enhanced Data Efficiency Using Deep Neural Networks and Gaussian Processes for Aerodynamic Design Optimization

Adjoint-based optimization methods are attractive for aerodynamic shape design primarily due to their computational costs being independent of the dimensionality of the input space and their ability to generate high-fidelity gradients that can then be used in a gradient-based optimizer. This makes them very well suited for high-fidelity simulation based aerodynamic shape optimization of highly parametrized geometries such as aircraft wings. However, the development of adjoint-based solvers involve careful mathematical treatment and their implementation require detailed software development. Furthermore, they can become prohibitively expensive when multiple optimization problems are being solved, each requiring multiple restarts to circumvent local optima. In this work, we propose a machine learning enabled, surrogate-based framework that replaces the expensive adjoint solver, without compromising on predicting predictive accuracy. Specifically, we first train a deep neural network (DNN) from training data generated from evaluating the high-fidelity simulation model on a model-agnostic design of experiments on the geometry shape parameters. The optimum shape may then be computed by using a gradient-based optimizer coupled with the trained DNN. Subsequently, we also perform a gradient-free Bayesian optimization, where the trained DNN is used as the prior mean. We observe that the latter framework (DNN-BO) improves upon the DNN-only based optimization strategy for the same computational cost. Overall, this framework predicts the true optimum with very high accuracy, while requiring far fewer high-fidelity function calls compared to the adjoint-based method. Furthermore, we show that multiple optimization problems can be solved with the same machine learning model with high accuracy, to amortize the offline costs associated with constructing our models. Our methodology finds applications in the early stages of aerospace design. (C) 2021 Published by Elsevier Masson SAS.

Renganathan, S. Ashwin↗

Aeroacoustic sensitivity analysis and optimal aeroacoustic design of turbomachinery blades

During the first year of the project, we have developed a theoretical analysis - and wrote a computer code based on this analysis - to compute the sensitivity of unsteady aerodynamic loads acting on airfoils in cascades due to small changes in airfoil geometry. The steady and unsteady flow though a cascade of airfoils is computed using the full potential equation. Once the nominal solutions have been computed, one computes the sensitivity. The analysis takes advantage of the fact that LU decomposition is used to compute the nominal steady and unsteady flow fields. If the LU factors are saved, then the computer time required to compute the sensitivity of both the steady and unsteady flows to changes in airfoil geometry is quite small. The results to date are quite encouraging, and may be summarized as follows: (1) The sensitivity procedure has been validated by comparing the results obtained by 'finite difference' techniques, that is, computing the flow using the nominal flow solver for two slightly different airfoils and differencing the results. The 'analytic' solution computed using the method developed under this grant and the finite difference results are found to be in almost perfect agreement. (2) The present sensitivity analysis is computationally much more efficient than finite difference techniques. We found that using a 129 by 33 node computational grid, the present sensitivity analysis can compute the steady flow sensitivity about ten times more efficiently that the finite difference approach. For the unsteady flow problem, the present sensitivity analysis is about two and one-half times as fast as the finite difference approach. We expect that the relative efficiencies will be even larger for the finer grids which will be used to compute high frequency aeroacoustic solutions. Computational results show that the sensitivity analysis is valid for small to moderate sized design perturbations. (3) We found that the sensitivity analysis provided important insight into how airfoils should be modified to improve their aeroelastic stability. Using this insight, we redesigned an aeroelastically unstable cascade to produce a stable cascade.

Hall, Kenneth C.↗

Theoretical Assessment of the Transition Between Electron Emission Mechanisms for Nonplanar Diodes

Theoretically and computationally describing the operation of nanodiodes requires characterizing the transitions between multiple electron emission mechanisms for nanodiodes with complicated geometries. This motivates our development of techniques to determine when simplified theories for individual mechanisms suffice compared to more complete, but more computationally expensive, models. Leveraging recent theories that define a canonical gap distance to translate planar theory to nonplanar diodes, we derive the conditions for the transitions among thermal emission, field emission, and space-charge-limited current density (SCLCD) in vacuum and with collisions for non-Cartesian coordinate systems, including spherical, cylindrical, and prolate spheroidal coordinate systems. Particle-in-cell (PIC) simulations of the current density as a function of applied voltage for a tip-to-plate geometry in vacuum agreed qualitatively with the asymptotes for thermal emission at low voltage and SCLCD at higher voltage using the canonical gap distance. As a result, this demonstrates the utility of this approach for guiding system design and suggests future extensions to save simulation time for more realistic geometries that are more computationally expensive.

Conformal mapping↗

Sensitivity of Single-Scattering Properties to Precipitation Particle Meltwater Geometry for GPM Passive Microwave and Radar Remote Sensing Applications

The objective of the current work is to describe the microwave single-scattering properties of partially melted ice-phase precipitation particles using physically-based computational methods, taking into full account the varied geometries of the initially “dry” ice particles and the distributions of liquid water that develop during the melting process. Ultimately, the bulk properties of ensembles of these partially-melted particles will be included in “scattering tables” to support radar and combined radar-radiometer remote sensing of precipitation. A meshless Lagrangian melting procedure (snowMELT) based on smoothed-particle hydrodynamics is applied to both spherical and finely-structured ice particle models to describe the full evolution of the particles from dry ice particles to liquid drops. The melting of spherical ice particles using snowMELT is compared to an alternative continuum physics model to validate melt times and internal thermodynamics. The discrete dipole approximation is then utilized to calculate the single-scattering properties of different mixed-phase particles throughout the melting process. The sensitivities of particle single-scattering properties to thermodynamic and hydrodynamic assumptions in snowMELT are explored, and the implications for combined radar-radiometer precipitation remote sensing from GPM are discussed.

William S Olson↗

Neural network–based pore flow field prediction in porous media using super resolution

Direct pore-scale simulations of fluid flow through porous media are computationally expensive to perform for realistic systems. Previous works have demonstrated using the geometry of the microstructure of porous media to predict the velocity fields therein based on neural networks. However, such trained neural networks do not perform well for unseen porous media with a large degree of heterogeneity. In this study we propose that incorporating a coarse velocity field in the input of neural networks is an effective way to improve the prediction performance. The coarse velocity field can be simulated with a low computational cost and provides global information to regularize the ill-posedness of the learning problem, which is usually caused by the use of local geometries due to the computational resource constraints. We show that incorporating the coarse-mesh velocity field significantly improves the prediction accuracy of the fine-mesh velocity field by comparison to the prediction that relies on geometric information alone, especially for the porous medium with a large interior vuggy pore space. We also show the flexibility of training the network in using coarse velocity fields with various resolutions. The results suggest that even using coarse velocity field with a very low resolution, the predictions are still enhanced and close to the ground truths. The feasibility of the method is further demonstrated by testing the trained network on real rocks. This study highlights the merits of incorporating a coarse-mesh velocity field into the input for neural networks, which provides global, physics-based information for the model, thereby improving the model's generalization capability.

42 ENGINEERING↗

Computation of turbulent near wake for asymmetric airfoils

A numerical procedure for studying the turbulent near wake of two dimensional airfoil sections is presented. The Reynolds Navier-Stokes equations were written for flow about bodies of arbitrary geometry and solved on an arbitrary nonuniform curvilinear computational mesh. Eddy viscosity and Reynolds stress turbulence transport models are considered. Specific examples are shown for airfoil section by using an algebraic viscosity model with streamwise relaxation and the interactive Reynolds stress model.

Deiwert, G. S.↗

QUICK-GEOMETRY, a rapid response method for mathematically modeling configuration geometry

The philosophy, development, and various applications of the QUICK-GEOMETRY system were outlined. This system provides a practical method for developing the geometry models that are essential to the operation of computer-based design and manufacturing systems. Of particular interest are the various methods for modeling surface geometry that are used by aerodynamic analysis codes.

Vachris, A. F., Jr.↗

Performance Improvements to the Cross Section Calculation in MPACT

The MPACT code is the primary deterministic neutron transport solver available in the Virtual Environment for Reactor Applications (VERA) as part of the Consortium for Advanced Simulation of Light Water Reactors (CASL). In contrast to the conventional two-step method using homogenization techniques, MPACT employs a direct transport methodology, where the transport calculation is performed with the explicit reactor core geometry, material compositions, and temperature distribution. As the direct whole-core transport calculation requires significant computational resources, performance improvements have been recently conducted in various components of MPACT. The initial MPACT profiling was performed on the EOS cluster at the Oak Ridge Leadership Computing Facility. Table I shows that the cross section processing accounted for 74% and 33% of the total runtime for VERA Progression Problems 5 and 7. Starting with a problem-independent multigroup (MG) library, two primary functionalities are performed in MPACT to obtain the problem-dependent MG cross sections: (1) the resonance self-shielding calculation, which currently MPACT is approaching with the subgroup method; (2) use of equivalence cross section from resonance calculation to compute the microscopic cross sections, and thus, the macroscopic cross sections of material regions. As shown in Table I, the time distribution in cross section processing varies from case to case. For Problem 5, a 2-D quarter core depletion case, the macroscopic XS dominates due to the increased number of isotopes in the depleted fuel. For Problem 7, a 3-D quarter core PWR at HFP and BOL, more subgroup calculations are performed to obtain updated self-shielded cross sections during the iteration. In this summary, the approaches to reduce the computing time in cross section processing are presented. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Monte Carlo paradigm for capillarity in porous media

Wet porous media are ubiquitous in nature as soils, rocks, plants, and bones, and in engineering settings such as oil production, ground stability, filtration and composites. Their physical and chemical behavior is governed by the distribution of liquid and interfaces between phases. Characterization of the interfacial distribution is mostly based on macroscopic experiments, aided by empirical formulae. We present an alternative computational paradigm utilizing a Monte Carlo algorithm to simulate interfaces in complex realistic pore geometries. The method agrees with analytical solutions available only for idealized pore geometries, and is in quantitative agreement with Micro X-ray Computed Tomography (microXCT), capillary pressure, and interfacial area measurements for natural soils. We demonstrate that this methodology predicts macroscopic properties such as the capillary pressure and air-liquid interface area versus liquid saturation based only on the pore size information from microXCT images and interfacial interaction energies. The generality of this method should allow simulation of capillarity in many porous materials.

54 ENVIRONMENTAL SCIENCES↗

Measuring thermal curing induced shrinkage of material extrusion based additive manufacturing silicone elastomer lattices by X-ray computed tomography

Thermal curing induces shrinkage in material extrusion based additive manufacturing silicone elastomer samples, resulting in discrepancies between as printed and final geometries. Knowing the extent to which the samples change in shape and size allows us to make appropriate modifications to the printing design to better control the geometry of the samples. We present an X-ray computed tomography (CT) based approach to determine filament-level shrinkage due to thermal curing of silicone elastomer samples printed with direct ink writing (DIW). The approach relies on custom-designed build plates that are resistant to the elevated curing temperatures and that have sufficiently distinct X-ray absorption characteristics from the silicone elastomer to ensure adequate segmentation of the latter in X-ray imaging data. We implement the approach to evaluate shrinkage in DIW ‘log pile’ samples with three distinct strand arrangements and demonstrate of how filament-level information can be extracted from the X-ray CT data.

Additive manufacturing↗

Comparison of Aero-Propulsive Performance Predictions for Distributed Propulsion Configurations

NASA's X-57 "Maxwell" flight demonstrator incorporates distributed electric propulsion technologies in a design that will achieve a significant reduction in energy used in cruise flight. A substantial portion of these energy savings come from beneficial aerodynamic-propulsion interaction. Previous research has shown the benefits of particular instantiations of distributed propulsion, such as the use of wingtip-mounted cruise propellers and leading edge high-lift propellers. However, these benefits have not been reduced to a generalized design or analysis approach suitable for large-scale design exploration. This paper discusses the rapid, "design-order" toolchains developed to investigate the large, complex tradespace of candidate geometries for the X-57. Due to the lack of an appropriate, rigorous set of validation data, the results of these tools were compared to three different computational flow solvers for selected wing and propulsion geometries. The comparisons were conducted using a common input geometry, but otherwise different input grids and, when appropriate, different flow assumptions to bound the comparisons. The results of these studies showed that the X-57 distributed propulsion wing should be able to meet the as-designed performance in cruise flight, while also meeting or exceeding targets for high-lift generation in low-speed flight.

Borer, Nicholas K.↗

Trinuclear gold chains and octanuclear copper gyrobifastigia stabilized using a fluorinated pyridyl ligand

The fluorinated pyridyl ligand [6-(CF 3 )-2-Py] − with gold( I ) affords trinuclear Au 3 assemblies that further organize into a supramolecular helical column through aurophilic interactions. Its chemistry with copper( I ) is even more remarkable, leading to an unprecedented octanuclear copper–pyridyl cluster complex featuring a central Cu 8 core with an approximate gyrobifastigium geometry. Solid powders of compounds {(6-(CF 3 )-2-Py)Au} 3 and {(6-(CF 3 )-2-Py)Cu} 8 exhibit intense photoluminescence at room temperature, displaying green and yellow colors to the naked eye, respectively. Here, the octanuclear copper complex is also an effective catalyst for azide–alkyne cycloaddition, producing triazoles. Detailed computational analyses confirm the preference for experimental geometries and provide insights into the observed luminescence.

Phan, Vo Quang Huy [University of Texas at Arlingt↗

The computation of mesh configurations for three-dimensional flow analysis

A geometry modeling method was developed to define three-dimensional mesh configurations, which were expressed by the set of surface intersections with a coordinate mesh. These configurations define bodies for transonic potential-flow computation in simple physical coordinates. Various configurations were prepared for 3-D potential flow analysis, including many bare inlet models in cylindrical coordinates. Trimmed surface models were used to prepare nacelle installation configurations. A variety of ducts and mixers were represented. Analytically defined mesh/surface intersections were compared with similar data obtained from the corresponding surface model. Parameters for an analytic surface definition from mesh-surface intersections obtained from a model of the surface were produced. In both studies the modeling accuracy was shown to be compatible with the flow analysis requirements. This technique fulfills the requirements of the associated three-dimensional potential-flow analysis. It preserves the flow analysis method's superior flexibility for adapting to unusual geometries. The geometry modeling technique is supported by a sufficient set of tools for effective use by general users, and sufficient accuracy was demonstrated.

Gibson, S. G.↗

Closures and Simulation for Thermal Radiation Transport in Stochastic Media with Nonlinear Temperature Dependence

Because of the practical challenge of rendering very complex realistic spatial structures for numerical work, it is common practice to resort to characterizing such media as stochastic mixtures of materials, ideally parametrized with low order statistics such as the mean, variance, and correlation functions of the now random material properties. This enables realizations of the medium to be repeatedly generated and radiation transport computations to, in principle, be performed for a large ensemble of these realizations to obtain a statistically well-characterized radiation field. Statistical post-processing yields desired quantities such as conditional and unconditional mean radiation flux and probability distributions of transmitted radiation. However, such computations prove expensive for all but the simplest stochastic geometries and are most suited for benchmarking approximate models. The most common approximations lead to homogenized media so that transport computations are required only on a single medium realization but by construct provide only limited statistical information on the radiation field. Almost all approximate approaches to this problem attempt to develop equations for low order moments of the radiation intensity (mean, second moment, correlation function) but inevitably encounter a closure problem: the equation for any statistical moment will contain terms depending on unknown higher-order moments. Thus, the challenge shifts to one of developing closure relations that relate the unknown moments to the lower order moments. Under very special conditions, an exact closure can be derived but in general closures are heuristically stated constitutive relations. Also, closure approaches depend on whether the mixing statistics are spatially and/or temporally continuous as in fluctuating turbulent fields, or discontinuous as in randomly mixed solid chunks of material. Thus, unconditional averaging is generally applied in the former case but conditional averaging is more appropriate when the mixing is discontinuous. In this work, the emphasis is on binary statistical mixtures of immiscible fluids as as such the quantities of interest are averages (flux, temperature) conditioned on the material type.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

CFD simulations of electric motor end ring cooling for improved thermal management

Proper thermal management of an electric motor for vehicle applications extends its operating range. One cooling approach is to impinge Automatic Transmission Fluid (ATF) onto the rotor end ring. Increased ATF coverage correlates to enhanced heat transfer. Computational Fluid Dynamics (CFD) analytical tools provide a mechanism to assess motor thermal management prior to hardware fabrication. The complexity of the fluid flow (e.g., jet atomization, interface tracking, wall impingement) and heat transfer makes these simulations challenging. Computational costs are high when solving these flows on high-speed rotating meshes. Typically, a Volume-of Fluid (VOF) technique (i.e., two-fluid system) is used to resolve ATF dynamics within this rotating framework. Suitable numerical resolution of the relevant physics for thin films under strong inertial forces at high rotor speeds is computationally expensive, further increasing the run times. In this work, a numerical study of rotor-ring cooling by ATF is presented using a patent automated Cartesian cut-cell based method coupled with Automatic Mesh Refinement (AMR). This approach automatically creates the Cartesian mesh on-the-fly and can effectively handle complex rotating geometries by adaptively refining the mesh based on local gradients in the flow field which results in better resolution of the air-ATF interface. A Single non-inertial Reference Frame (SRF) approach is used to account for the rotating geometry and to further improve the overall computational efficiency. Quasi-steady state conditions are targeted in the analysis of the results. Important physics such as ATF jet structure, velocity detail near the air-jet interface, ATF coverage/accumulation on the ring surface, and cooling capacity are presented for a low-resolution Reynolds averaged Navier-Stokes (RANS), high-resolution RANS, and high-resolution Large-Eddy Simulation (LES) models. Computations are scaled over hundreds of cores on a supercomputer to maximize turnaround time. Each numerical approach is shown to capture the general trajectory of the oil jet prior to surface impingement. The high-resolution LES simulation, however, is superior in capturing small scale details and heat transfer between the free jet and surrounding air.

42 ENGINEERING↗