Search NASA⌕ Search

SEARCH · Search NASA

Results for “DETAILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Facilitating the exploitation of ERTS imagery using snow enhancement techniques

The author has identified the following significant results. New fracture detail within New England test area has been interpreted from ERTS-1 images. Comparative analysis of snow-free imagery (1096-15065 and 1096-15072) has demonstrated that MSS bands 5 and 7 supply the greatest amount of geological fracture detail. Interpretation of the first snow-covered ERTS-1 images (1132-15074 and 1168-15065) in correlation with ground snow depth data indicates that a heavy blanket of snow (less than 9 inches) accentuates major structural features while a light dusting (greater than 1 inch) accentuates more subtle topographic expressions. Snow cover was found to accentuate drainage patterns which are indicative of lithological and/or structural variations. Snow cover provided added enhancement for viewing and detecting topographically expressed fractures and faults. A recent field investigation was conducted within the New England test area to field check lineaments observed from analysis of ERTS-1 imagery, collect snow depth readings, and obtain structural joint readings at key locations in the test area.

Wobber, F. J.↗

Evaluate the application of ERTS-A data for detecting and mapping snow cover

The author has identified the following significant results. Analysis of ERTS-1 data covering the test sites in the western United States indicate that the MSS-4 and 5 spectral bands are the most useful for detecting and mapping snow cover. Of these two bands, the MSS-5 is the most consistently useful, as snow-covered areas in some MSS-4 images are nearly saturated causing some loss of detail. Snow can be readily detected and can be distinguished from clouds through a number of interpretive keys. At the ERTS-1 resolution, numerous terrestrial features not visible in lower resolution meteorological satellite data can be detected. In addition to various natural features, man-made features such as roads, electric power lines, cultivated fields, and timber cuts are visible. In two cases analyzed for the Salt-Verde Watershed in Arizona, good agreement is observed between the location of the snowline as mapped from the ERTS-1 data and as depicted on aerial snow survey charts compiled within a few days of the ERTS-1 passage. Results indicate that the snowline can be mapped in more detail from ERTS-1 imagery than can be achieved by current aerial survey methods.

Barnes, J. C.↗

Radiative coupled viscous flow with massive blowing

An analysis of the fully-coupled viscous, radiating flow past an ablating blunt body at hyperbolic entry conditions is presented. A detailed thermodynamics computation, as well as a realistic radiation transport model, is included. A locally nonsimilar approach is employed to solve the conservation equations away from the stagnation point. The validity of the locally nonsimilar approach is demonstrated for some nonablating cases. Sample calculations are made for the typical flight condition of a Jovian entry probe. The effects of the downstream injection of the ablation products of a carbon heat shield on the flux distribution around the body are discussed in detail. It is found that most of the radiative energy is absorbed by the injected carbon gas and dumped into the wake.

Chou, Y. S.↗

Shuttle mission simulator hardware conceptual design report

The detailed shuttle mission simulator hardware requirements are discussed. The conceptual design methods, or existing technology, whereby those requirements will be fulfilled are described. Information of a general nature on the total design problem plus specific details on how these requirements are to be satisfied are reported. The configuration of the simulator is described and the capabilities for various types of training are identified.

Burke, J. F.↗

California coast nearshore processes study

The author has identified the following significant results. Remote sensor aircraft flights took place simultaneously with ERTS-1 overpasses at the San Francisco, Monterey Bay, and Santa Barbara test cells. The cameras and scanners used were configured for detecting suspended sediment and for maximum water penetration. The Ektachrome/Wratten 12 photographs which were intentionally overexposed 1-1/2 stops were found to show the most extensive sediment transport detail. Minus blue/K 2 photographs illustrate nearshore underwater bottom detail including the head of the Mugu submarine canyon. The EMSIDE 9 channel scanner was employed to classify and differentiate suspended sediment, oil, kelp, and other materials found in the nearshore area. Processing of bulk ERTS-1 computer compatible tapes was utilized to enhance and analyze nearshore sediments. This technique was most successful in enhancing subtle nearshore features found to be faint or invisible on prints made from the supplied negatives. In addition to this continuing computer process, an effort was initiated to interface density values from the bulk tapes into contouring and mapping software.

Pirie, D. M.↗

Users manual for Streamtube Curvature Analysis: Analytical method for predicting the pressure distribution about a nacelle at transonic speeds, volume 1

The computer program, Streamtube Curvature Analysis, is described for the engineering user and for the programmer. The user oriented documentation includes a description of the mathematical governing equations, their use in the solution, and the method of solution. The general logical flow of the program is outlined and detailed instructions for program usage and operation are explained. General procedures for program use and the program capabilities and limitations are described. From the standpoint of the grammar, the overlay structure of the program is described. The various storage tables are defined and their uses explained. The input and output are discussed in detail. The program listing includes numerous comments so that the logical flow within the program is easily followed. A test case showing input data and output format is included as well as an error printout description.

Keith, J. S.↗

Plane elasto-plastic analysis of v-notched plate under bending by boundary integral equation method

A method of solution is presented, which, when applied to the elasto-plastic analysis of plates having a v-notch on one edge and subjected to pure bending, will produce stress and strain fields in much greater detail than presently available. Application of the boundary integral equation method results in two coupled Fredholm-type integral equations, subject to prescribed boundary conditions. These equations are replaced by a system of simultaneous algebraic equations and solved by a successive approximation method employing Prandtl-Reuss incremental plasticity relations. The method is first applied to number of elasto-static problems and the results compared with available solutions. Good agreement is obtained in all cases. The elasto-plastic analysis provides detailed stress and strain distributions for several cases of plates with various notch angles and notch depths. A strain hardening material is assumed and both plane strain and plane stress conditions are considered.

Rzasnicki, W.↗

Cyclic debonding of adhesive joints

Bonded lap joints were manufactured and tested under static and fatigue loading. Specimens were designed to fail in the bondline, and all fatigue tests included monitoring the crack growth to failure. Test specimens included aluminum details joined by two different adhesives. Specimens also included titanium and boron-epoxy details joined by an epoxy laminating resin. Additonal program variables included bondline thickness, adherend and spice plate thickness, specimen width, and specimen fabrication procedure. Adhesive aging was found to be generally detrimental to the lives of most of the specimens bonded with one adhesive system. Adhesive material was found to have a major influence on debond rate. Co-cured titanium/boron-epoxy specimens were found to resist debonding better than specimens fabricated with a sequential cure. Splice plate thickness and test section width were found to have little effect on debond rate. The data also suggested the existence of an optimum bondline thickness.

Hoffman, D. J.↗

Millimeter wave experiment for ATS-F

A detailed description of spaceborne equipment is provided. The equipment consists of two transmitters radiating signals at 20 and 30 GHz from either U.S. coverage horn antennas or a narrow beam parabolic antenna. Three modes of operation are provided: a continuous wave mode, a multitone mode in which nine spectral lines having 180 MHz separation and spaced symmetrically about each carrier, and a communications mode in which communications signals from the main spacecraft transponder are modulated on the two carriers. Detailed performance attained in the flight/prototype model of the equipment is presented both under laboratory conditions and under environmental extremes. Provisions made for ensuring reliability in space operation are described. Also described the bench test equipment developed for use with the experiment, and a summary of the new technology is included.

Green, J. S.↗

Small, high pressure ratio compressor: Aerodynamic and mechanical design

The Small, High-Pressure-Ratio Compressor Program was directed toward the analysis, design, and fabrication of a centrifugal compressor providing a 6:1 pressure ratio and an airflow rate of 2.0 pounds per second. The program consists of preliminary design, detailed areodynamic design, mechanical design, and mechanical acceptance tests. The preliminary design evaluate radial- and backward-curved blades, tandem bladed impellers, impeller-and diffuser-passage boundary-layer control, and vane, pipe, and multiple-stage diffusers. Based on this evaluation, a configuration was selected for detailed aerodynamic and mechanical design. Mechanical acceptance test was performed to demonstrate that mechanical design objectives of the research package were met.

Bryce, C. A.↗

Application of ERTS-1 data to analysis of agricultural crops and forests in Michigan

The results reported are based on analysis of ERTS Frame 1033-15580 collected over southwestern Lower Michigan on August 25, 1972. Major agricultural crops such as corn and soybeans were approaching maturity at this data and forest canopies were dense. Extensive ground truth information was gathered by detailed field study of test strips. This detailed information was supplemented over larger areas by interpretation of RB-57 and C-47 photography and MSS imagery. Recognition processing of ERTS-1 MSS data was carried out on a digital computer. Fields and forest stands were selected as training sets and test areas. Aerial imagery was essential for locating the positions of these selected areas on ERTS digital tapes. The recognition process was successful for each type of vegetation which had a dense green canopy such as forests, corn, and soybeans. Bare soil was also recognizable as a category.

Safir, G. R.↗

Progress of an ERTS-1 program for Lake Ontario and its basin

The Lake Ontario drainage basin covers over 32,000 square miles of U.S. and Canadian territory. ERTS-1 data is contributing to the comprehensive study of this basin as part of the International Field Year for the Great Lakes (IFYGL). This paper details a processing approach for obtaining detailed and objective synoptic information thought to be applicable to terrestrial water balance studies of such a large area. A simple ratio algorithm was tested for minimizing daily variations in ERTS data and for allowing the discrimination of surface features and land use classes of hydrologic significance. These steps are necessary if ERTS data is to provide the quantitative information required for the study and management of areas of regional size.

Wagner, T. W.↗

Land use classification and change analysis using ERTS-1 imagery in CARETS

Land use detail in the CARETS area obtainable from ERTS exceeds the expectations of the Interagency Steering Committee and the USGS proposed standardized classification, which presents Level 1 categories for ERTS and Level 2 for high altitude aircraft data. Some Levels 2 and 3, in addition to Level 1, categories were identified on ERTS data. Significant land use changes totaling 39.2 sq km in the Norfolk-Portsmouth SMSA were identified and mapped at Level 2 detail using a combination of procedures employing ERTS and high altitude aircraft data.

Alexander, R. H.↗

Use of satellite data for mapping snow cover in the western United States

The author has identified the following significant results. The results of the analysis of ERTS imagery for the Arizona and California test sites indicate that the extent of the mountain snowpacks can be mapped from ERTS data in more detail than is depicted in aerial survey snow charts. In addition to comparative analysis with aerial snow charts, the ERTS data have also been compared with high altitude aircraft photography. The results of the comparative analysis indicate that although small details in the snow line that cannot be detected in the ERTS data can be mapped from the higher resolution aircraft data, the boundaries of the areas of significant snow cover can be mapped as accurately from ERTS imagery as from aircraft photography.

Barnes, J. C.↗

Applicability of ERTS-1 to Montana geology

The author has identified the following significant results. A detailed band 7 ERTS-1 lineament map covering western Montana and northern Idaho has been prepared and is being evaluated by direct comparison with geologic maps, by statistical plots of lineaments and known faults, and by field checking. Lineament patterns apparent in the Idaho and Boulder batholiths do not correspond to any known geologic structures. A band 5 mosaic of Montana and adjacent areas has been laid and a lineament annotation prepared for comparison with the band 7 map. All work to date indicates that ERTS-1 imagery is very useful for revealing patterns of high-angle faults, though much less useful for mapping rock units and patterns of low-angle faults. Large-scale mosaics of U-2 photographs of three test sites have been prepared for annotation and comparison with ERTS-1 maps. Mapping of Quaternary deposits in the Glacial Lake Missoula basin using U-2 color infrared transparencies has been successful resulting in the discovery of some deposits not previously mapped. Detailed work has been done for Test Site 354 D using ERTS-1 imagery; criteria for recognition of several rock types have been found. Photogeologic mapping for southeastern Montana suggest Wasatch deposits where none shown of geologic map.

Weidman, R. M.↗

Application of ERTS-1 imagery to detecting and mapping modern erosion features and to monitoring erosional changes, in southern Arizona

The author has identified the following significant results. The chief results during the reporting period were three 1:1,000,000 scale maps made from one ERTS-1 frame (1085-17330, 16 October 1972) showing: (1) the three most important types of materials in terms of the modern erosion problem: the readily erodible soils, gravel piedmonts and basin-fill areas, and consolidated rocks; (2) alluvial fans (dissected and relatively undissected); and (3) (as an additional bonus) linear structural features. Eight key areas (small parts of the whole study area) were selected for detailed study, and mapping was started in two of them, by interpretation of ultrahigh (U-2 and RB-57) airphotos, supplemented by field studies. In these areas detailed mapping was done not only on the modern erosion phenomena (arroyos, gullies, modern flood plains and terraces, and areas of sheet erosion and deposition), but also other features pertinent to the erosion problem, such as slope-local relief, landforms rock units, soil particle size and erodibility, and classes of vegetative cover.

Morrison, R. B.↗

Computer program for determining rotational line intensity factors for diatomic molecules

A FORTRAN IV computer program, that provides a new research tool for determining reliable rotational line intensity factors (also known as Honl-London factors), for most electric and magnetic dipole allowed diatomic transitions, is described in detail. This users manual includes instructions for preparing the input data, a program listing, detailed flow charts, and three sample cases. The program is applicable to spin-allowed dipole transitions with either or both states intermediate between Hund's case (a) and Hund's case (b) coupling and to spin-forbidden dipole transitions with either or both states intermediate between Hund's case (c) and Hund's case (b) coupling.

Whiting, E. E.↗

Interpretation of land use and stream order, Pawnee River Basin, Kansas

The author has identified the following significant results. Land use and stream orders were mapped from ERTS-1 imagery covering the Pawnee River Basin. Total area of the basin, irrigated dry land crop area, and rangeland area were determined. The stream order of the basin was calculated by the Strahler method and provided more detail than is available on the comparable 1:250,000 sheets. This study has demonstrated the feasibility of using ERTS-1 imagery to map stream networks in greater detail than is required for 1:250,000 scale. The utility of ERTS-1 has also been demonstrated for mapping and mensuration of data relating to performance of ground cover types and the extent of irrigation.

Morain, S. A.↗