Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Self similarities in desalination dynamics and performance using capacitive deionization

Charge transfer and mass transport are two underlying mechanisms which are coupled in desalination dynamics using capacitive deionization (CDI). We developed simple reduced-order models based on a mixed reactor volume principle which capture the coupled dynamics of CDI operation using closed-form semi-analytical and analytical solutions. We use the models to identify and explore self-similarities in the dynamics among flow rate, current, and voltage for CDI cell operation including both charging and discharging cycles. The similarity approach identifies the specific combination of cell (e.g. capacitance, resistance) and operational parameters (e.g. flow rate, current) which determine a unique effluent dynamic response. We here demonstrate self-similarity using a conventional flow between CDI (fbCDI) architecture, and we hypothesize that our similarity approach has potential application to a wide range of designs. We performed an experimental study of these dynamics and used well-controlled experiments of CDI cell operation to validate and explore limits of the model. For experiments, we used a CDI cell with five electrode pairs and a standard flow between (electrodes) architecture. Guided by the model, we performed a series of experiments that demonstrate natural response of the CDI system. We also identify cell parameters and operation conditions which lead to self-similar dynamics under a constant current forcing function and perform a series of experiments by varying flowrate, currents, and voltage thresholds to demonstrate self-similarity. Based on this study, we hypothesize that the average differential electric double layer (EDL) efficiency (a measure of ion adsorption rate to EDL charging rate) is mainly dependent on user-defined voltage thresholds, whereas flow efficiency (measure of how well desalinated water is recovered from inside the cell) depends on cell volumes flowed during charging, which is determined by flowrate, current and voltage thresholds. Results of experiments strongly support this hypothesis. Results show that cycle efficiency and salt removal for a given flowrate and current are maximum when average EDL and flow efficiencies are approximately equal. We further explored a range of CC operations with varying flowrates, currents, and voltage thresholds using our similarity variables to highlight trade-offs among salt removal, energy, and throughput performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semianalytic theory of self-similar optical propagation and mode locking using a shape-adaptive model pulse

A semianalytic theory for the pulse dynamics in similariton amplifiers and lasers is presented, based on a model pulse with adaptive shape. By changing a single parameter, this test function can be continuously tweaked between a pure Gaussian and a pure parabolic profile and can even represent sech-like pulses, the shape of a soliton. This approach allows us to describe the pulse evolution in the self-similar and other regimes of optical propagation. Employing the method of moments, the evolution equations for the characteristic pulse parameters are derived from the governing nonlinear Schroedinger or Ginzburg-Landau equation. Due to its greatly reduced complexity, this description allows for extensive parameter optimization, and can aid intuitive understanding of the dynamics. As an application of this approach, we model a soliton-similariton laser and validate the results against numerical simulations. This constitutes a semianalytic model of the soliton-similariton laser. Due to the versatility of the model pulse, it can also prove useful in other application areas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quintessential cosmological tensions

Several cosmological tensions have emerged in light of recent data, most notably in the inferences of the parameters and . We explore the possibility of alleviating both these tensions simultaneously by means of the Albrecht-Skordis “quintessence” potential. The field can reduce the size of the sound horizon while concurrently suppressing the power in matter density fluctuations before it comes to dominate the energy density budget today. Interestingly, this rich set of dynamics is governed entirely by one free parameter that is of in Planck units. We find that the inferred value of can be increased, while that of can be decreased, both by compared to the case. However, ultimately the model is disfavored by Planck and BAO data alone, compared to the standard model, with a . When including large scale structure and supernova data we find . We note that historically much attention has been focused on preserving the three angular scales , , and to their values. Our work presents an example of how, while doing so indeed maintains a relatively good fit to the cosmic microwave background data for an increased number of ultrarelativistic species, it is a priori insufficient in maintaining such a fit in more general model spaces.

79 ASTRONOMY AND ASTROPHYSICS↗

Nanoparticle Diffusion in Miscible Polymer Nanocomposite Melts

X-ray photon correlation spectroscopy measurements were used to quantify the dynamics of bare and bimodal grafted silica nanoparticles mixed with PEO melts of different molecular weights. In dilute polymer nanocomposite (PNC) samples, we find diffusive NP behavior as described by the Stokes–Einstein relationship so long as the adsorbed PEO polymer layer is taken into account in determining both the effective NP size and its role on composite viscosity. The size of this bound layer was found to be approximately 2R g , where R g is the chain radius of gyration. We also expanded our system to investigate how the dynamics of grafted NPs differ from bare NPs with an adsorbed layer. We showed that the dynamics again can be determined by an effective NP radius at a scale smaller than the effective interparticle spacing; however, at larger length scales, the morphology and grafting parameters play a major role in the system dynamics. These results allow us to quantify NP ordering driven by polymer crystallization. It has previously been speculated that behavior is controlled by the relative ratio of time scale of crystal growth and the diffusive time scale of the NPs, a Peclet number. When the former time scale is longer, then the NPs are expected to be segregated into the interlamellar amorphous zones, while the NPs are too slow to be reorganized in the opposite case. We show here that this conjecture is quantitatively correct and the demarcation in behavior occurs for Pe = 1. Thus, we provide a way to estimate a critical spherulite growth rate for any semicrystalline PNC, at which a given NP can be ordered. Together, the results of this study permit us to tunably design PNCs through directed dispersion of NPs in a polymer matrix.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Kinetic Alfven solitary waves in a magnetized plasma with superthermal electrons

A study of the ion Larmor radius effects on the solitary kinetic Alfven waves (SKAWs) in a magnetized plasma with superthermal electrons is presented by employing the kinetic theory. The linear dispersion relation of SKAW is shown to depend on the superthermal parameter κ, ion to electron temperature ratio, and the angle of wave propagation. Using the Sagdeev potential approach, the energy balance equation has been derived to study the dynamics of SKAWs. The effects of various plasma parameters are investigated for the propagation of SKAWs. It is shown that only compressive solitons can exist and in the Maxwellian limit our results are in good agreement with previous studies. Further, the characteristics of small amplitude SKAWs are investigated. Present study could be useful for the understanding of SKAWs in a low β plasma in astrophysical environment, where particle distributions are superthermal in nature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Functional Relationships between Kinetic, Flow, and Geometrical Parameters in a High-Temperature Chemical Microreactor

Computational fluid dynamics (CFD) simulations and isothermal approximation were applied for the interpretation of experimental measurements of the C 10 H 7 Br pyrolysis efficiency in the high-temperature microreactor and of the pressure drop in the flow tube of the reactor. Applying isothermal approximation allows the derivation of analytical relationships between the kinetic, gas flow, and geometrical parameters of the microreactor, which, along with CFD simulations, accurately predict the experimental observations. On the basis of the obtained analytical relationships, a clear strategy for measuring rate coefficients of (pseudo) first-order bimolecular and unimolecular reactions using the microreactor was proposed. The pressure- and temperature-dependent rate coefficients for the C 10 H 7 Br pyrolysis calculated using variable reaction coordinate transition state theory were invoked to interpret the experimental data on the pyrolysis efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Collective flow properties of intermediate mass fragments and isospin effects in fragmentation at Fermi energies

Within a microscopic transport model (Stochastic Mean Field) we analyze the collective flow properties associated to the intermediate mass fragments produced in nuclear fragmentation. We study the transverse and elliptic flow parameters for each rank in mass hierarchy. The results are plotted for {sup 124}Sn + {sup 124}Sn systems at an energy of 50AMeV and for an impact parameter b=4fm. The correlation with the dynamics of the isospin degree of freedom is also discussed and the results are presented for the same systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Generalized Kepler problems. I. Without magnetic charges

For each simple euclidean Jordan algebra V of rank {rho} and degree {delta}, we introduce a family of classical dynamic problems. These dynamical problems all share the characteristic features of the Kepler problem for planetary motions, such as the existence of Laplace-Runge-Lenz vector and hidden symmetry. After suitable quantizations, a family of quantum dynamic problems, parametrized by the nontrivial Wallach parameter {nu}, is obtained. Here, {nu} Element-Of W(V):={l_brace}k({delta}/2) Double-Vertical-Line k=1,...,({rho}-1){r_brace} Union (({rho}-1)({delta}/2),{infinity}) and was introduced by N. Wallach to parametrize the set of nontrivial scalar-type unitary lowest weight representations of the conformal group of V. For the quantum dynamic problem labelled by {nu}, the bound state spectra is -(1/2/(I+{nu}({rho}/2)){sup 2}), I= 0, 1, Horizontal-Ellipsis and its Hilbert space of bound states gives a new realization for the afore-mentioned representation labelled by {nu}. A few results in the literature about these representations become more explicit and more refined. The Lagrangian for a classical Kepler-type dynamic problem introduced here is still of the simple form: (1/2) parallel x parallel {sup 2}+(1/r). Here, x is the velocity of a unit-mass particle moving on the space consisting of V's semi-positive elements of a fixed rank, and r is the inner product of x with the identity element of V.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In Operando Monitoring of Dynamic Recovery in 3D-Printed Thermoset Nanocomposites by XPCS

Extrusion-based additive manufacturing methods, such as direct-write of carbon fiber-reinforced epoxy inks, have become an attractive route toward development of structural composites in recent years, because of emerging techniques such as big area additive manufacturing. The development of improved materials for these methods has been a major focus area; however, an understanding of the effects of the printing process on the structural and dynamic recovery in printed materials remains largely unexplored. Here, our goal is to capture multiscale and temporal morphology and dynamics within thermosetting composite inks to determine the parameters during the printing process that influence the recovery of the printed material. Herein, we use X-ray photon correlation spectroscopy in small-angle scattering geometry to reveal both morphology and recovery dynamics of a nanoparticle (layered-silicate Cloisite 30B) in a thermoset epoxy resin (EPON 826) during the printing process in real time. Our results show that the dynamics of the layered silicate particles during recovery are anisotropic and slow down to behavior which is characteristic of aging in colloidal clay suspensions around tage ≈ 12 s. The dynamics and alignment of the particles during recovery were tempo-spatially mapped, and the recovery post printing was shown to be strongly influenced by the deposition onto the build plate in addition to the extrusion through the print head. Finally, our in operando results provide insight into the parameters that must be considered when optimizing materials and methods for precisely tailored local properties during 3D printing.

36 MATERIALS SCIENCE↗

Accurate data-driven surrogates of dynamical systems for forward propagation of uncertainty

Stochastic collocation (SC) is a well-known non-intrusive method of constructing surrogate models for uncertainty quantification. In dynamical systems, SC is especially suited for full-field uncertainty propagation that characterizes the distributions of the high-dimensional solution fields of a model with stochastic input parameters. However, due to the highly nonlinear nature of the parameter-to-solution map in even the simplest dynamical systems, the constructed SC surrogates are often inaccurate. Here, this work presents an alternative approach, where we apply the SC approximation over the dynamics of the model, rather than the solution. By combining the data-driven sparse identification of nonlinear dynamics framework with SC, we construct dynamics surrogates and integrate them through time to construct the surrogate solutions. We demonstrate that the SC-over-dynamics framework leads to smaller errors, both in terms of the approximated system trajectories as well as the model state distributions, when compared against full-field SC applied to the solutions directly. We present numerical evidence of this improvement using three test problems: a chaotic ordinary differential equation, and two partial differential equations from solid mechanics.

42 ENGINEERING↗

Approximate solutions for half-dark solitons in spinor non-equilibrium Polariton condensates

In this work I generalize and apply an analytical approximation to analyze 1D states of non-equilibrium spinor polariton Bose–Einstein condensates (BEC). Solutions for the condensate wave functions carrying black solitons and half-dark solitons are presented. The derivation is based on the non-conservative Lagrangian formalism for complex Ginzburg–Landau type equations (cGLE), which provides ordinary differential equations for the parameters of the dark soliton solutions in their dynamic environment. Explicit expressions for the stationary dark soliton solution are stated. Subsequently the method is extended to spin sensitive polariton condensates, which yields ordinary differential equations for the parameters of half-dark solitons. Finally a stationary case with explicit expressions for half-dark solitons is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Morphology and proton diffusion in a coarse-grained model of sulfonated poly(phenylenes)

A coarse-grained model previously used to simulate Nafion using dissipative particle dynamics (DPD) is modified to describe sulfonated Diels-Alder poly(phenylene) (SDAPP) polymers. The model includes a proton-hopping mechanism similar to the Grotthuss mechanism. The intramolecular parameters for SDAPP are derived from atomistic molecular dynamics (MD) simulation using the iterative Boltzmann inversion. The polymer radii of gyration, domain morphologies, and cluster distributions obtained from our DPD model are in good agreement with previous atomistic MD simulations. As found in the atomistic simulations, the DPD simulations predict that the SDAPP nanophase separates into hydrophobic polymer domains and hydrophilic domains that percolate through the system at sufficiently high sulfonation and hydration levels. Increasing sulfonation and/or hydration leads to larger proton and water diffusion constants, in agreement with experimental measurements in SDAPP. In the DPD simulations, the proton hopping (Grotthuss) mechanism becomes important as sulfonation and hydration increase, in qualitative agreement with experiment. The turning on of the hopping mechanism also roughly correlates with the point at which the DPD simulations exhibit clear percolated, hydrophilic domains, demonstrating the important effects of morphology on proton transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-based reactive flow model for triaminotrinitrobenzene (TATB) plastic bonded explosives

A new reactive flow model is presented for triaminotrinitrobenzene (TATB)-based plastic bonded explosives, applicable to shock initiation and steady detonation problems of differing initial temperature. Temperature disequilibrium is assumed between unreacted explosive, material in the vicinity of compressed defects (called hot spots), and reaction products. The model incorporates temperature-dependent decomposition reaction rates. Particularly, Arrhenius model parameters were derived from quantum-based molecular dynamics simulations of TATB decomposition. Further, a model of detonation carbon aggregation is incorporated, describing the slow release of energy inherent to detonation in TATB-based materials. Model parameters were calibrated against gas gun shock initiation experiments and steady detonation rate stick tests. The predictive ability of the model in the shock initiation regime is tested against recent thin pulse experiments. The model is found to perform equally well in predicting the size-effect curve of ambient, cold, and hot rate sticks. The present work demonstrates the viability of incorporating results from subscale simulations into a continuum-scale reactive flow model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion-ion dynamic structure factor of warm dense mixtures

In this study, the ion-ion dynamic structure factor of warm dense matter is determined using the recently developed pseudoatom molecular dynamics method [Starrett et al., Phys. Rev. E 91, 013104 (2015)]. The method uses density functional theory to determine ion-ion pair interaction potentials that have no free parameters. These potentials are used in classical molecular dynamics simulations. This constitutes a computationally efficient and realistic model of dense plasmas. Comparison with recently published simulations of the ion-ion dynamic structure factor and sound speed of warm dense aluminum finds good to reasonable agreement. Using this method, we make predictions of the ion-ion dynamical structure factor and sound speed of a warm dense mixture—equimolar carbon-hydrogen. This material is commonly used as an ablator in inertial confinement fusion capsules, and our results are amenable to direct experimental measurement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantum process tomography by 2D fluorescence spectroscopy

Reconstruction of the dynamics (quantum process tomography) of the single-exciton manifold in energy transfer systems is proposed here on the basis of two-dimensional fluorescence spectroscopy (2D-FS) with phase-modulation. The quantum-process-tomography protocol introduced here benefits from, e.g., the sensitivity enhancement ascribed to 2D-FS. Although the isotropically averaged spectroscopic signals depend on the quantum yield parameter Γ of the doubly excited-exciton manifold, it is shown that the reconstruction of the dynamics is insensitive to this parameter. Applications to foundational and applied problems, as well as further extensions, are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement-based performance profiles and dynamics of UDT over dedicated connections

Wide-area data transfers in high-performance computing and big data scenarios are increasingly being carried over dedicated network connections that provide high capacities at low loss rates. UDP-based transport protocols are expected to be particularly well-suited for such transfers but their performance is relatively unexplored over a wide range of connection lengths, compared to TCP over shared connections. We present extensive throughput measurements of UDP-based Data Transfer (UDT) over a suite of physical and emulated 10 Gbps connections. In sharp contrast to current UDT analytical models, these measurements indicate much more complex throughput dynamics that are sensitive to the connection modality, protocol parameters, and round-trip times. Lyapunov exponents estimated from the Poincare maps of UDT traces clearly indicate regions of instability and complex dynamics. We propose a simple model based on the ramp-up and sustainment regimes of a generic transport protocol, which qualitatively illustrates the dominant monotonicity and concavity properties of throughput profiles and relates them to Lyapunov exponents. These measurements and analytical results together enable us to comprehensively evaluate UDT performance and select parameters to achieve high throughput, and they also provide guidelines for designing effective transport protocols for dedicated connections.

Foster, Ian↗

Dynamics of magnetic islands in large Δ{sup ′} regimes

Saturation of magnetic islands at large values of the tearing mode stability parameter Δ{sup ′} is investigated numerically. In such regimes, the island dynamics exhibit a number of transient features such as coalescence instability, X-point collapse, and plasmoid generation. It is shown that while conditions for these transient instabilities to appear depend on the viscosity and resistivity, the final width of the saturated island is independent of such phenomena, as well as viscosity and resistivity values. It is found that the saturated island width is strongly influenced by global properties of the current profile and related to the equilibrium reconnected flux across the magnetic island.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

UTILITY OF THE WEAK TEMPERATURE GRADIENT APPROXIMATION FOR EARTH-LIKE TIDALLY LOCKED EXOPLANETS

Planets in M dwarf stars' habitable zones are likely to be tidally locked with orbital periods of the order of tens of days. This means that the effects of rotation on atmospheric dynamics will be relatively weak, which requires small horizontal temperature gradients above the boundary layer of terrestrial atmospheres. An analytically solvable and dynamically consistent model for planetary climate with only three free parameters can be constructed by making the weak temperature gradient (WTG) approximation, which assumes temperatures are horizontally uniform aloft. The extreme numerical efficiency of a WTG model compared to a three-dimensional general circulation model (GCM) makes it an optimal tool for Monte Carlo fits to observables over parameter space. Additionally, such low-order models are critical for developing physical intuition and coupling atmospheric dynamics to models of other components of planetary climate. The objective of this paper is to determine whether a WTG model provides an adequate approximation of the effect of atmospheric dynamics on quantities likely to be observed over the next decade. To do this, we first tune a WTG model to GCM output for an Earth-like tidally locked planet with a dry, 1 bar atmosphere, then generate and compare the expected phase curves of both models. We find that differences between the two models would be extremely difficult to detect from phase curves using the James Webb Space Telescope. This result demonstrates the usefulness of the WTG approximation when used in conjunction with GCMs as part of a modeling hierarchy to understand the climate of remote planets.

79 ASTRONOMY AND ASTROPHYSICS↗