Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOSSIL FUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Design and Operation of a Sensible Heat Peaking Unit for Small Modular Reactors

Approximately 19% of the electricity produced in the United States comes from nuclear power plants. Traditionally, nuclear power plants, as well as larger coal-fired plants, operate in a baseload manner at or near steady-state for prolonged periods of time. Smaller, more maneuverable plants, such as gas-fired plants, are dispatched to match electricity supply and demand above the capacity of the baseload plants. However, air quality concerns and CO2 emission standards has made the burning of fossil fuels less desirable, despite the current low cost of natural gas. Wind and solar photovoltaic (PV) power generation are attractive options due to their lack of carbon footprint and falling capital costs. Yet, these renewable energy sources suffer from inherent intermittency. This inherent intermittency can strain electric grids, forcing carbon-based and nuclear sources of energy to operate in a load follow mode. For nuclear reactors, load follow operation can be undesirable due to the associated thermal and mechanical stresses placed on the fuel and other reactor components. Various methods of Thermal Energy Storage (TES) can be coupled to nuclear (or renewable) power sources to help absorb grid variability caused by daily load demand changes and renewable intermittency. Our previous research has shown that coupling a sensible heat TES system to a Small Modular Reactor (SMR) allows the reactor to run at effectively nominal full power during periods of variable electric demand by bypassing steam to the TES system during periods of excess capacity. In this study we demonstrate that this stored thermal energy can be recovered, allowing the TES system to act as a peaking unit during periods of high electric demand, or used to produce steam for ancillary applications such as desalination. For both applications the reactor is capable of operating continuously at approximately 100% power.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Review and Modeling of Integrated Energy Systems with Nuclear Reactor Coupled Desalination and District Heating

Detailed reviews of a past advanced nuclear reactor based integrated energy system, as well as other nuclear reactor and fossil fuel based integrated energy systems have been performed for this work. Review of the utilization of heat from nuclear reactors for various applications and cogeneration has been done. The heat can be utilized by extraction of the steam from the turbine while the steam is still at a desired temperature. While use of nuclear process heat for district heating in countries like Finland, France, China, Poland, and elsewhere is discussed, more focus of the review has been given on nuclear desalination processes. Integrated energy systems (IES) where distinct types of reactors like PWR, BWR, sodium cooled fast reactor, heavy water reactor and other advanced reactors are coupled with various nuclear desalination processes like multi-effect distillation (MED), multi-stage flashing (MSF) and reverse osmosis (RO) methods have been discussed. The nuclear desalination plant at Aktau has been discussed in more detail due to its decades of successful operation. The IES of the Aktau plant coupled with 5-effect MED desalination plant has been taken as a reference for modeling the Open Modelica (OM) based IES of this work. Here, the OM IES model shows good agreement with the MED plant output of Aktau and can be extended for future applications of IES.

42 ENGINEERING↗
DOE OSTI2022

High temperature and pressure regime soot: Physical, optical and chemical signatures from high explosive detonations

Submicron particles are formed during the detonation and deflagration of carbon-rich energetic materials known as high explosives (HE) that can be lofted and transported long distances in the atmosphere. Particles include refractory species like soot, a.k.a. black carbon (BC), and have impacts to climate and human health at local, regional, and global scales. Here, we contrast detonation soot aerosol physical, optical and chemical properties that are formed more efficiently in terms of emission factors and ratios with traditional combustion sources from biomass burning and fossil fuels. We utilize ambient aerosol techniques for the first time to identify soot from two well-known HE's (1) Comp B-3: 40% trinitrotoluene (TNT) and 60% 1,3,5-trinitro-1,3,5-triazinane (RDX) and (2) PBX 9501: 95% 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX) with 2.5% Estane and a 2.5% mixture of bis(2,2-dinitropropyl)-acetal (BDNPA) and bis(2,2-dinitropropyl)-formal (BDNPF). Size distributions, optical and chemical properties are presented. Aggregate soot had small mobility diameters (<100 nm) and unique optical and chemical signatures depending on the explosive composite composition, detonation atmosphere (e.g., air, argon) and pressure. Single-scattering albedos (SSA) from 0.3 to 0.8 and absorption Angstrom exponents (AAE) from 0.5 to 2.0 measured across 405–870 nm wavelengths depended on the explosive composite composition and detonation conditions. Comp B-3 detonation soot was similar to other combustion soot sources, whereas PBX 9501 soot had high scattering relative to absorption. Carbonaceous chemical signatures included the presence of fullerenes that were distinct from ambient and laboratory-generated soot surrogates and the detection of trace metals, including aluminum, copper, iron, and zinc.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Plant a Trillion Trees Campaign to Reduce Global Warming – Fleshing Out the Concept

The campaign to plant a trillion trees provided an easily understood approach to reduce the threat of global warming. However, focusing on trees does not consider that a maturing forest releases carbon (C) from dying trees offsetting C intake from growth of other trees, and results in only a one-time carbon storage benefit. Under sustainable management that harvests before forest growth slows down, forest C is transferred to wood products that substitute for fossil fuel (FF)- intensive products, reducing the carbon dioxide (CO 2 ) emissions with every harvest. Sustainably managed forests maintain growth by replanting (or regenerating), sustaining the C stored in products, as well as avoiding FF-intensive product emissions with every harvest. This paper addresses the question: Could planting more trees significantly reduce atmospheric CO 2 ; and if so, how? Survey data from many wood-producing mills show life cycle inventory (LCI) data on C that has been tracked through every stage of processing for many different wood products specific to each United States (USA) supply region, as well as C displacement measurements when substituting wood for FFintensive products. Results show that more and better-managed forest lands and more efficient product uses provide significant opportunities to reduce CO 2 emissions, especially in highly productive forest regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Regional Economic Impacts of the Los Angeles 100% Renewable Energy Transition

To help mitigate greenhouse gas (GHGs) generation from burning fossil fuels, many state and local governments are requiring utilities to dramatically increase the share of electricity generated from renewable sources. The City of Los Angeles has set a target of 100% renewable energy by 2045 and has formulated a plan that considers nine potential alternative scenarios that differ by technology, location, and timing. Each scenario has a unique set of local investments, operating and maintenance (O&M) costs, and concomitant rate structures. In this study we develop and apply a computable general equilibrium (CGE) model built specifically for LA to estimate and compare the economic impacts for each of the scenarios over time relative to a reference case. We find differences in economic impacts across scenarios, depending on the level and timing of investment and O&M expenditures, as well as differences in the relative rate changes across scenarios. Results show that employment and economic output are positively correlated with greater capital and O&M spending, while higher electricity rates can dampen economic activity. Several scenarios generate positive economic impacts relative to the reference case, showing that the transition need not have harmful economic impacts, and all scenarios generate a number of other positive co-benefits, such as reduced damage to health from the reduction of ordinary air pollutants. The net employment impacts from 2026 to 2045 across the scenarios range from a low of 3,600 job-year losses annually to 4,700 job-year gains, both around only 0.1% of the baseline average annual employment in the city over that period. The analysis also indicates that lower-income households are relatively more affected than others by the scenarios. Overall, even in the most negatively impactful case, the economic output and employment effects are quite small when taken in the context of the overall size of the regional economy and the large reduction in GHGs.

economic impact modeling↗
DOE OSTI2020

A convective wind resource model for Solar Vortex power generation

Climate change has increased the need for clean, nonpolluting energy sources to decrease dependence on fossil fuels. Alternative energy sources, mainly solar and horizontal wind, have been the primary focus for producing clean energy. New technologies are being developed, such as the Solar Vortex (SoV), which was developed at the Georgia Institute of Technology, and relies on a vertical wind resource to generate power. The National Renewable Energy Lab (NREL) has resource models representing solar and horizontal wind resources across the 48 United States. This research developed a vertical wind resource model that is comparable in resolution to NREL’s solar and horizontal wind resource models and uses the model for estimating power output for the SoV. This model complements NREL’s existing resource models and supports the deployment of an additional clean energy generation technology. The model was applied to Mesa, Arizona to find feasible sites for a small-scale vertical wind farm.

14 SOLAR ENERGY↗
DOE OSTI2018

Pity the poor biofuels policymaker: reconsidered

The purpose of this note is to clarify three significant misrepresentations published in a Policy Update (Tyner, 2013) titled “Pity the poor biofuel policymaker.” The stated aim of the Policy Update (Tyner, 2013) was to “review some of the literature on three key biofuels issues”: land-use change (LUC), fossil fuel prices and food prices impacts. However, Tyner (2013) repeatedly cited our publication, “Global economic effects of US biofuel policy and the potential contribution from advanced biofuels” (Oladosu et al., 2012). The following compares statements made in the Policy Update (Tyner, 2013) with the substance of what was published by Oladosu et al. (2012).

09 BIOMASS FUELS↗
DOE OSTI2024

The Economics of Power System Transitions

Electricity generated by fossil fuels is dispatchable, meaning that generators can be turned on when needed. By contrast, renewable energy tends to be intermittent because of the variability of natural sources such as wind and sunlight. New approaches are needed to solve the challenges to electricity systems posed by the growing share of variable renewable energy (VRE) in these systems. Specifically, how should the physical power system and markets for electricity be structured to deliver electricity at low cost and reflect consumers’ preferences for reliability? Current power systems have largely achieved these two goals through a competitive market for generation based on marginal cost pricing and through mandated overcapacity to ensure 100 percent reliability to consumers. Decarbonization-induced increases in the share of generation from nondispatchable VRE create operational challenges: ensuring 100 percent reliability in a VRE-dominated system will be costly and inefficient. Preferences for reliability are heterogeneous, as some consumers will insist on 100 percent reliable energy, whereas others may be willing to forgo reliability for lower cost. In this article, we discuss ways to design a power system and electricity market that can address this inefficiency.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Global Energy System Transitions

Energy systems power the world’s economies. They are pivotal to providing sustained economic prosperity that provides the goods and services that humans desire. Climate change is intimately linked with energy systems, because CO2 from fossil fuel use is the most important anthropogenic greenhouse gas emitted to the atmosphere, and cumulative anthropogenic emissions determine Earth’s concentration of CO2. Limiting climate change therefore means that global energy systems must reduce net CO2 emissions to zero and stabilize emissions of other GHGs. We compare energy system pathways as they are currently evolving with alternatives that have the potential to limit climate change over the 21st century. The differences are profound. Here we also discuss some frontier research issues that can provide a better understanding of potential pathways and their implications for decisions makers.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2015

The contribution of Paris to limit global warming to 2 °C

International negotiators have clearly articulated a goal to limit global warming to 2°C. In preparation for the 21st Conference of Parties (COP21) in Paris in December 2015, countries are submitting their Intended Nationally Determined Contributions (INDCs) to the United Nations Framework Convention on Climate Change indicating their emissions reduction commitments through 2025 or 2030. Limiting global warming to 2°C is a challenging goal and will entail a dramatic transformation of the global energy system, largely complete by 2040. The deliberations in Paris will help determine the balance of challenges faced in the near-term and long-term. We use GCAM, a global integrated assessment model, to analyze the energy and economic-cost implications of INDCs. The INDCs imply near-term actions that reduce the level of mitigation needed in the post-2030 period, particularly when compared with an alternative path, in which nations are unable to undertake emissions mitigation until after 2030. We find that the latter case could require up to 2300 GW of premature retirements of fossil fuel power plants and up to 2900 GW of additional low-carbon power capacity installations within a five-year period of 2031 to 2035. INDCs have the effect of reducing premature retirements and new-capacity installations after 2030 by 50% and 34% respectively. However, if presently announced INDCs were strengthened to achieve greater near-term emissions mitigation, the 2031-2035 transformation could be tempered to require 84% fewer premature retirements of power generation capacity and 56% fewer new-capacity additions. Our results suggest that the ensuing COP21 in Paris will be critical in shaping the challenges of limiting global warming to 2°C.

climate change↗
DOE OSTI2015

Vulnerabilities and opportunities at the nexus of electricity, water and climate

The articles in this special issue examine the critical nexus of electricity, water, and climate, emphasizing connections among resources; the prospect of increasing vulnerabilities of water resources and electricity generation in a changing climate; and the opportunities for research to inform integrated energy and water policy and management measures aimed at increasing resilience. Here, we characterize several major themes emerging from this research and highlight some of the uptake of this work in both scientific and public spheres. Underpinning much of this research is the recognition that water resources are expected to undergo substantial changes based on the global warming that results primarily from fossil energy-based carbon emissions. At the same time, the production of electricity from fossil fuels, nuclear power, and some renewable technologies (biomass, geothermal and concentrating solar power) can be highly water-intensive. Energy choices now and in the near future will have a major impact not just on the global climate, but also on water supplies and the resilience of energy systems that currently depend heavily on them.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2014

The impacts of permafrost thaw on land-atmosphere greenhouse gas exchange

Permafrost thaw and the subsequent mobilization of carbon stored in previously frozen soil organic matter (SOM) would be a strong positive feedback to climate1. As the northern permafrost region experiences double the rate of warming as the rest of the Earth2, the vast amount of carbon in permafrost soils3 is vulnerable to thaw, decomposition and release as atmospheric greenhouse gases (GHG). Here, we employ a process-based model simulation experiment to assess the net effect of this so-called permafrost carbon feedback (PCF) in recent decades. Results show a wide-spread increase in the depth to permafrost between 1990 and 2006, with simulated active layer thickness (ALT) capturing the mean and spatial variability of the observational data. Analysis of the simulation experiment provides an estimate of a 2.8 mm/yr increase in permafrost depth, which translates to 281 TgC/yr thawed from previously frozen SOM. Overall, we estimate a net GHG forcing of 534 MtCO2eq/yr directly tied to ALT dynamics, while accounting for CO2 (562 MtCO2eq/yr) and CH4 (52 MtCO2eq/yr) release as well as CO2 uptake by vegetation (-80 MtCO2eq/yr). This net forcing represents a significant factor in the estimated 640 MtCO2eq/yr pan-arctic GHG source4, and an additional 6.9% contribution on top of the combined 7792 MtCO2eq/yr fossil fuel emissions from the eight Arctic nations over this time period5.

carbon↗
DOE OSTI2017

Global wetland contribution to 2000–2012 atmospheric methane growth rate dynamics

Increasing atmospheric methane (CH 4 ) concentrations have contributed to approximately 20% of anthropogenic climate change. Despite the importance of CH 4 as a greenhouse gas, its atmospheric growth rate and dynamics over the past two decades, which include a stabilization period (1999–2006), followed by renewed growth starting in 2007, remain poorly understood. We provide an updated estimate of CH 4 emissions from wetlands, the largest natural global CH 4 source, for 2000–2012 using an ensemble of biogeochemical models constrained with remote sensing surface inundation and inventory-based wetland area data. Between 2000–2012, boreal wetland CH 4 emissions increased by 1.2 Tg yr –1 (–0.2–3.5 Tg yr –1 ), tropical emissions decreased by 0.9 Tg yr –1 (–3.2–1.1 Tg yr –1 ), yet globally, emissions remained unchanged at 184 ± 22 Tg yr –1 . Changing air temperature was responsible for increasing high-latitude emissions whereas declines in low-latitude wetland area decreased tropical emissions; both dynamics are consistent with features of predicted centennial-scale climate change impacts on wetland CH 4 emissions. Despite uncertainties in wetland area mapping, our study shows that global wetland CH 4 emissions have not contributed significantly to the period of renewed atmospheric CH 4 growth, and is consistent with findings from studies that indicate some combination of increasing fossil fuel and agriculture-related CH 4 emissions, and a decrease in the atmospheric oxidative sink.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Informing energy consumption uncertainty: an analysis of energy data revisions

Quality energy consumption data are important for many types of analysis, and global data sets estimate trends of county level energy consumption, derived from country reported data and regional reports. We present a novel basis for informing uncertainty in energy data by quantifying the changes in reported energy consumption as countries update their previously reported data. We use 17 editions of the British Petroleum World Energy Statistics (2001-2017) to evaluate how reported energy consumption is revised over time in aggregate coal, oil, and natural gas consumption data. We find that 70% of non-zero data points are adjusted by an average of 1.3% of a country’s total fossil fuel use in the year after their first publication. Earlier data points are revised less often, but almost half of historical trends contain some revisions in later years. The size and rate of data revisions vary over countries and fuels: coal data points have larger, less frequent revisions while oil data points have smaller more frequent revisions, with natural gas in between. A K-means cluster analysis was performed to group together countries with similar revision patterns. These groups span income, economy classification, OECD membership, and regions. Standard country groupings, therefore, do not predict the extent to which a country's energy data has undergone revisions in the past.

Hoesly, Rachel M. (ORCID:0000000309652729)↗
DOE OSTI2019

Co-benefits of China’s climate policy for air quality and human health in China and transboundary regions in 2030

Abstract Climate policies targeting CO 2 emissions from fossil fuels can simultaneously reduce emissions of air pollutants and their precursors, thus mitigating air pollution and associated health impacts. Previous work has examined co-benefits of climate policy from reducing PM 2.5 in rapidly-developing countries such as China, but have not examined co-benefits from ozone and its transboundary impact for both PM 2.5 and ozone. Here, we compare the air quality and health co-benefits of China’s climate policy on both PM 2.5 and ozone in China to their co-benefits in three downwind and populous countries (South Korea, Japan and the United States) using a coupled modeling framework. In a policy scenario consistent with China’s pledge to peak CO 2 emissions in approximately 2030, avoided premature deaths from ozone reductions are 54 300 (95% confidence interval: 37 100–71 000) in China in 2030, nearly 60% of those from PM 2.5 . Total avoided premature deaths in South Korea, Japan, and the US are 1200 (900–1600), 3500 (2800–4300), and 1900 (1400–2500), respectively. Total avoided deaths in South Korea and Japan are dominated by reductions in PM 2.5 -related mortality, but ozone plays a more important role in the US. Similar to co-benefits for PM 2.5 in China, co-benefits of China’s policy for ozone and for both pollutants in those downwind countries also rise with increasing policy stringency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Projected changes in seasonal precipitation extremes over the United States in CMIP6 simulations

Quantifying how climate change may impact precipitation extremes is a priority for informing adaptation and policy planning. In this study, Coupled Model Intercomparison Project phase 6 global climate models are analyzed to identify robust signals of projected changes in summer and winter precipitation extremes over the United States (US). Under a projected fossil-fuel based economic (i.e. high greenhouse gas emissions) scenario, our results show consistent changes in the seasonal patterns for many precipitation extremes by the end of the 21st century. We find a robust projected increase in the intensity of winter precipitation across models, with less agreement during the summer. Similarly, a robust projected amplification of heavy precipitation over the northern US is evident in winter, while intermodel spread is prevalent in summer projections. Specifically, the heavy and very heavy winter precipitation days (R10mm and R20mm) exhibit larger increases compared to other aspects of precipitation. Additionally, changes in dry extremes (e.g. consecutive dry days) are found to differ significantly across various subregions and seasons. Overall, our results suggest that the US may suffer more natural disasters such as floods and droughts in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Integrated assessment model diagnostics: key indicators and model evolution

Integrated assessment models (IAMs) form a prime tool in informing climate mitigation strategies. Diagnostic indicators that allow to compare these models can help to describe and explain differences in model projections. This also increases transparency and comparability. Earlier, the IAM community has developed an approach to diagnose models (Kriegler et al., 2015). Here we build on this, by proposing a selected set of well-defined indicators as a community standard, similar to metrics used for other modeling communities such as climate models. These indicators are the relative abatement index (RAI), emission reduction type index (ERT), inertia timescale (IT), fossil fuel reduction (FFR), transformation index (TI) and cost per abatement value (CAV). We apply the approach to 17 IAMs, including both older version as well as their latest versions, as applied in the IPCC 6th Assessment Report (AR6). The study shows that the approach can be easily applied and allows for comparison of model versions in time. The indicators and their trends can often be explained in terms of model characteristics and changes. We show that together, the set of six indicators can provide an useful indication of the main traits of the model and can roughly indicate the general model behavior. The results also show that there is often a considerable spread across the models. Interestingly, the diagnostic values often change for different model versions, but there does not seem to be a distinct trend across the different models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Assessing the sequestration time scales of some ocean-based carbon dioxide reduction strategies

Abstract Ocean-based carbon dioxide (CO 2 ) removal (CDR) strategies are an important part of the portfolio of approaches needed to achieve negative greenhouse gas emissions. Many ocean-based CDR strategies rely on injecting CO 2 or organic carbon (that will eventually become CO 2 ) into the ocean interior, or enhancing the ocean’s biological pump. These approaches will not result in permanent sequestration, because ocean currents will eventually return the injected CO 2 back to the surface, where it will be brought into equilibrium with the atmosphere. Here, a model of steady state global ocean circulation and mixing is used to assess the time scales over which CO 2 injected in the ocean interior remains sequestered from the atmosphere. There will be a distribution of sequestration times for any single discharge location due to the infinite number of pathways connecting a location at depth with the sea surface. The resulting probability distribution is highly skewed with a long tail of very long transit times, making mean sequestration times much longer than typical time scales. Deeper discharge locations will sequester purposefully injected CO 2 much longer than shallower ones and median sequestration times are typically decades to centuries, and approach 1000 years in the deep North Pacific. Large differences in sequestration times occur both within and between the major ocean basins, with the Pacific and Indian basins generally having longer sequestration times than the Atlantic and Southern Oceans. Assessments made over a 50 year time horizon illustrates that most of the injected carbon will be retained for injection depths greater than 1000 m, with several geographic exceptions such as the Western North Atlantic. Ocean CDR strategies that increase upper ocean ecosystem productivity with the goal of exporting more carbon to depth will have mainly a short-term influence on atmospheric CO 2 levels because ∼70% will be transported back to the surface ocean within 50 years. The results presented here will help plan appropriate ocean CDR strategies that can help limit climate damage caused by fossil fuel CO 2 emissions.

54 ENVIRONMENTAL SCIENCES↗