Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel Cycle Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Development of Accelerated Steady-state Test Capsule Experiments to Replicate EBR-II Fuel Behavior Using BISON Fuel Performance Analysis

Here in this work, BISON fuel performance calculations were performed to predict the fuel behavior of accelerated burnup U-Pu-Zr fuel, with temperature operation conditions of the fuel and the cladding mirroring conditions within EBR-II fuel pins. The temperature operating conditions within the FAST accelerated burnup rods were aimed at replicating EBR-II X447/X447A fuel surface and inner cladding surface temperatures. Due to the FAST capsule design, these temperatures can be replicated with fission rate densities being significantly increased. fuel performance modeling has not been assessed for novel experiments such as accelerated burnup utilizing the FAST capsule within ATR. This is an important step in understanding accelerated irradiation methods as many performance models are empirical models conforming to the results of PIE but do not always include physical models that would represent the changes in irradiation tests.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fuel Performance Modeling Plan to Support the Advance Gas Reactor Program

This report documents the current status of the fuel performance modeling initiative to support the Advanced Gas Reactor (AGR) program in the development of tristructural isotropic (TRISO) coated fuel particles. A brief summary of the modeling codes that have been developed to support TRISO modeling is included along with a summary of the behavior of fuel particles during irradiation and the modeling used to capture these effects. In addition, this report identifies further modeling and material property needs that have been identified for further development based on experience from previously performed AGR experiments. In general, the remaining activities to support fuel performance modeling for the AGR program include continued AGR experiment support for AGR-3/4 and AGR-5/6/7 as well as modeling improvements identified throughout the course of the program. These modeling improvements can be summarized as the following: Fission product transport Thermomechanical particle behavior Additional modeling needs may be identified during the processing the data collected during the AGR post-irradiation examination (PIE) campaign and may lead to further modeling improvements that are not included in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Depletion Chain Simplification With Pseudo-Nuclides to Model Decay Effects

This work introduces the novel usage of pseudo-nuclides to model decay effects which are otherwise absent from simplified depletion libraries. Pseudo-nuclides are artificial nuclides which, when added to a simplified depletion library, can preserve quantities of interest such as decay energy release or decay photon activity which are otherwise significantly under-predicted by simplified libraries. Several dozen pseudo-nuclides are capable of accurately modeling decay effects of hundreds of short-lived radionuclides. The computational resources needed to model the decay effects in depletion systems with simplified depletion libraries with pseudo-nuclides are significantly less than those needed when using simplified depletion libraries without pseudo-nuclides. When compared to the similar method of decay heat precursors for a given system, pseudo-nuclides allow for smaller depletion libraries to be generated because of their ability to more accurately model the fission product irradiation effect on decay heat.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Critical Experiments to Benchmark Moderator Temperature Reactivity Worth

The simulation of nuclear reactors requires being able to accurately model several different interrelated physical processes including neutronics, heat production, fluid/thermal physics, structural mechanics, fuel behavior, chemistry, and balance-of-plant. In order to design and use new types of nuclear reactors, modern codes have been developed which couple together the behavior of these different physical models to accurately consider the feedback effects between different physical effects. The SHARP toolset, part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) project, is an example of an effort to combine models of neutronics, thermal-hydraulics, and structural mechanics in a coupled simulation to model any type of nuclear reactor as accurately as possible. The validation of multi-physics coupling techniques requires new experimental benchmark experiments specifically designed for that purpose. As a preliminary step towards design of these experiments, a series of measurements have been performed to demonstrate the temperature-dependent neutronic behavior of a well-characterized reactor assembly for comparison with the available codes. The facility adopted for these experiments is Walthousen Reactor Critical Facility (RCF) at Rensselaer Polytechnic Institute (RPI). The RCF is unique in several aspects and provides several advantages to this type of experiment. Built in 1954 by the American Locomotive Company (ALCO), the RCF has been used to design small compact reactors. RPI acquired the facility in 1963, and the highly-enriched uranium fuel was later swapped for low-enriched fuel pins that were excess from the SPERT facility experiments. Nowadays, The RCF is regarded as a teaching and research facility, permitting the training of licensed Senior Reactor Operators, and offering a critical experiments laboratory course to students. The reactor core standard configuration consists of 332 or 333 UO{sub 2} fuel pins, containing a total of 35.2 grams of U- 235 each (4.81 % enriched). The pins are arranged in a regular lattice with a pitch of 1.6256 cm. The number and configuration of these pins are flexible, and the reactor's overall thermal power is limited to no more than 15 W. As the low thermal output of the reactor does not induce any measurable temperature changes, the effect of temperature in the reactor is observed by applying two 18- kW electric heaters to the water moderator, with mechanical agitators to maintain uniformity in moderator temperature. Before beginning experiments, each fuel pin inside the core was surveyed for mechanical defects (bending or warping) that may contribute to uncertainty in core behavior. Every fuel pin has been individually removed from the core and checked for any irregularities on its surface (caused by shocks or usage). About 12 % of the 333 pins were found to have a small degree of warping and were replaced with excess pins available in the facility. In doing this, we made sure all the pins are identical, thereby increasing the accuracy of future models. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

First Principle based Thermal Conductivity Modeling of Metal Alloys with Applications on Uranium Alloys

Thermal conductivity is an important materials property related to heat transport, which is essential to many applications, ranging from thermoelectrics to nuclear reactor materials. High- quality thermal conductivity data is critical to these materials and their associated technologies, including the nuclear fuel materials like traditional oxide fuels and metallic uranium (U) fuels, e.g. U-Zr and U-Mo alloys. And thermal conductivity modeling is widely used to interpolate or extrapolate experimental data, to obtain high-quality thermal conductivity data over wide temperature and composition range, and to understand the impacts of different factors including defects and microstructures. However, a general thermal conductivity model for metal alloys which can work regrading different phase components is still missing. Also, for U alloys, a thermal conductivity model working with different phases is needed. Therefore, in this work, we developed thermal conductivity models for metal alloys, based on ab-initio calculations, semi-classical physics rules, and limited experimental data. The goals of these models are to help obtain high- quality thermal conductivity data within a little experimental input as possible, have models that are extendable to varying microstructures, including different types of irradiation effects, and provide mechanistic understanding of heat transfer in the modeled alloys. In this work, our model solves several challenges in the development. The DFT-BTE approach is applied to decrease the reliance on experimental data and make the model extendable to composition changes and defects. A practical and efficient way to combine the DFT inputs with physics rules is pointed out in this work too. A staged approach, which starts from simple cases of elemental metals, then extends to solid solutions, different compound phases, and multi-phase mixtures, is presented to work with the metal alloys in different phase components. Our models are demonstrated respectively on aU for elemental metal model, on U-Zr and U-Mo alloys in aU temperature range for multi-phase mixture model, on high-temperature U-Zr, U-Nb, and U-Mo alloys in the body-centered cubic phase for concentrated solid solution model, and on irradiated U-Mo alloys for irradiated metal alloy model. All models show great agreement with experimental data. In these demonstrations, our model shows its advantages compared to previous empirical fitting model. Our model requires fewer experimental data, due to the inputs from DFT. The quantitative insights into the different physical factors are provided in our model, as it incorporates the electron and phonon scattering mechanisms. Our model also can be extended to incorporate the contributions of point defects, grain boundaries, and noble gas bubbles, to integrate their effects on heat transfer. This model can serve as both a foundation for understanding the more complex thermal conductivity of realistic U alloy fuels and a useful tool to guide further modeling of thermal conductivity to aid materials and device design.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CODE-TO-CODE BENCHMARKING OF THE PORFLOW AND GOLDSIM CONTAMINANT TRANSPORT MODELS USING A SIMPLE 1-D DOMAIN - 11191

An investigation was conducted to compare and evaluate contaminant transport results of two model codes, GoldSim and Porflow, using a simple 1-D string of elements in each code. Model domains were constructed to be identical with respect to cell numbers and dimensions, matrix material, flow boundary and saturation conditions. One of the codes, GoldSim, does not simulate advective movement of water; therefore the water flux term was specified as a boundary condition. In the other code, Porflow, a steady-state flow field was computed and contaminant transport was simulated within that flow-field. The comparisons were made solely in terms of the ability of each code to perform contaminant transport. The purpose of the investigation was to establish a basis for, and to validate follow-on work that was conducted in which a 1-D GoldSim model developed by abstracting information from Porflow 2-D and 3-D unsaturated and saturated zone models and then benchmarked to produce equivalent contaminant transport results. A handful of contaminants were selected for the code-to-code comparison simulations, including a non-sorbing tracer and several long- and short-lived radionuclides exhibiting both non-sorbing to strongly-sorbing characteristics with respect to the matrix material, including several requiring the simulation of in-growth of daughter radionuclides. The same diffusion and partitioning coefficients associated with each contaminant and the half-lives associated with each radionuclide were incorporated into each model. A string of 10-elements, having identical spatial dimensions and properties, were constructed within each code. GoldSim's basic contaminant transport elements, Mixing cells, were utilized in this construction. Sand was established as the matrix material and was assigned identical properties (e.g. bulk density, porosity, saturated hydraulic conductivity) in both codes. Boundary conditions applied included an influx of water at the rate of 40 cm/yr at one end of the string and no-flow lateral flow boundaries. A unit quantity of each contaminant was introduced at the influx boundaries and the rate of outflux at the opposite end of the 10-element string was recorded to make the comparisons. Saturated conditions were assumed in this evaluation. Under these carefully controlled conditions the two codes produced essentially identical results, demonstrating that both codes appear to be accurately implementing the contaminant transport mechanisms. The conclusion is that a satisfactory basis was established to justify the exercise in which 1-D GoldSim model was benchmarked against the 2-D unsaturated zone and 3-D saturated zone Porflow models used at the Savannah River Site (SRS).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Computational determination of a primary diffusion mode in γ U-10Mo under irradiation

Low enriched uranium (< 20 % 235 U)-molybdenum (U-Mo) monolithic fuel is the primary candidate for high performance research and test reactors, and is in the process of being qualified to replace highly enriched uranium (≥ 20 % 23 5U) fuel. As part of the qualification process, it is critical to understand and predict the behavior of fission gas bubbles under irradiation, which affects fuel swelling and fuel failure. Mechanistic fuel models are being developed that can both reproduce the existing experimental data for fuel swelling, and be further applied to irradiation conditions beyond the experimental scope. Diffusion of species under irradiation conditions is an important parameter in the mechanistic fuel models; however, no temperature-relevant experimental diffusion data exists. In the present work, radiation-enhanced diffusion coefficients of U, Mo, and Xe in λU-10wt.%Mo were calculated in the temperature range between 300 K and 1400 K via rate-theory models and molecular dynamics simulations with an embedded-atom method interatomic potential for the U-Mo-Xe system. Accordingly, total diffusion coefficients under relevant irradiation conditions are determined using previously obtained intrinsic thermal diffusion and radiation-driven diffusion coefficients, as well as the newly calculated radiation-enhanced diffusion coefficients presented herein. Radiation-enhanced diffusion of U and Mo was dominant in the intermediate temperature range, whereas radiation-enhanced diffusion of Xe did not significantly contribute to total diffusion of Xe at the relevant fission rate densities. Radiation-enhanced diffusion of Xe became faster than both intrinsic thermal diffusion and radiation-driven diffusion at a fission rate density of 5 x 10 22 fissions/m 3 /s, which is higher than the typical fission rate density range in research reactors. The temperature regime that radiation-enhanced diffusion of each element dominated was dependent on the fission rate density. Finally, the total diffusion coefficients of U, Mo, and Xe, updated in this work, will be utilized as parameters in the mechanistic fuel models to help predict the behavior of fission gas bubbles under irradiation more accurately.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of a Tractive Energy Analysis to Quantify the Benefits of Advanced Efficiency Technologies Using Characteristic Drive Cycle Data

Accurately predicting the fuel savings that can be achieved with the implementation of various technologies developed for fuel efficiency can be very challenging, particularly when considering combinations of technologies. Differences in the usage of highway vehicles can strongly influence the benefits realized with any given technology, which makes generalizations about fuel savings inappropriate for different vehicle applications. A model has been developed to estimate the potential for reducing fuel consumption when advanced efficiency technologies, or combinations of these technologies, are employed on highway vehicles, particularly medium- and heavy-duty trucks. The approach is based on a tractive energy analysis applied to drive cycles representative of the vehicle usage, and the analysis specifically accounts for individual energy loss factors that characterize the technologies of interest. This tractive energy evaluation is demonstrated by analyzing measured drive cycles from a long-haul trucking fleet and the results of an assessment of the fuel savings potential for combinations of technologies are presented. The results of this research will enable more reliable estimates of the fuel savings benefits that can be realized with particular technologies and technology combinations for individual trucking applications so that decision makers can make informed investment decisions for the implementation of advanced efficiency technologies.

33 ADVANCED PROPULSION SYSTEMS↗

Phase-field simulation of irradiated metals Part 1: Void kinetics.

We present a phase-field model of void formation and evolution in irradiated metals by spatially and temporally evolving vacancy and self-interstitial concentration fields. By incorporating a coupled set of Cahn-Hilliard and Allen-Cahn equations, the model captures the processes of point defect generation and recombination, annihilation of defects at sinks, as well as void nucleation and growth in the presence of grain boundaries. Illustrative results are presented that characterize the rate of void growth or shrinkage due to supersaturated vacancy or interstitial concentrations, void nucleation and growth kinetics due to cascade-induced defect production, as well as void denuded and peak zones adjacent to grain boundaries.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optimization of thermal barrier coating performance and durability over a drive cycle

A methodology to thermo-mechanically optimize a piston thermal barrier coating over a full drive cycle was established. The optimization objective was to minimize the heat transfer to the engine wall while maintaining structural integrity of the coating. Over 800 candidate materials were investigated and the optimization required more than one million non-road transient drive cycle calculations; real materials were investigated to ensure a realizable result and the existence of thermal and mechanical properties. High computational efficiency was achieved using a recently developed analytical heat transfer technique for multilayer engine walls. An uncoupled approach was utilized for the optimization, wherein the gas temperature and heat transfer coefficient profiles from a fully coupled and calibrated baseline model over the 20-min drive cycle were employed. The coating/piston interface temperature was constrained to be below the maximum piston service temperature limit. The durability was assessed using a recently developed analytical coating delamination framework for engine in-cylinder coatings based on the energy release rate when a crack forms. Results are presented for a mechanically unconstrained optimization and for cases constrained to three fixed levels of drive-cycle maximum energy release rate, and also constrained by the individual material’s toughness. The best-performing coating materials identified were verified using the fully coupled system-level model, which compared well to the uncoupled predictions. A study on the effect of adding a sealing layer to some high-performing, but porous, coatings showed a reduction in fuel consumption benefit and an increased exhaust temperature over the cycle, but the system still outperformed the uncoated case. The results of the study elucidate the importance of including engine performance and mechanical failure considerations in thermal barrier coating design.

Engineering↗

Durable High-Power Membrane Electrode Assemblies with Low Pt Loading

Recent progress in developing and implementing Pt-alloy cathode catalysts and thin (10-15 micron) low resistance membranes has enabled high performance state of art (SOA) membrane electrode assembly (MEA) with low Pt loading. However, these high performing MEAs do not meet durability requirements, especially at peak power, because of complex degradation mechanisms that are sensitive to the materials, MEA design, and fuel cell operating strategy. Specifically, power degradation of the cathode occurs via Pt and Co dissolution as well as deterioration of O 2 transport properties. Additionally, thin membranes are subject to failure due to manufacturing defects in the adjacent gas diffusion media and electrodes and the formation of membrane-attacking radical species caused by high gas crossover. In this project led by General Motors LLC (GM), the objective was to enhance the durability of SOA MEA through optimization of operating conditions, instead of new materials development. Along with our project partners, we have mapped the impact of operating conditions on the durability of SOA MEA. Output of the project include a low Pt loading SOA MEA that exceeds Department of Energy (DOE) 2020 target of >1 W/cm 2 at rated power and pathway to achieve >5000 h of durability. Durability studies in the project provide a detailed understanding of failure modes and operating condition sensitivity on cathode and membrane failure, critical for defining operating conditions and hybridization strategies that can guide system controls to maximize low-Pt MEA life. The project also generated and validated degradation models that will provide future research direction, critical for guiding future cycles of automotive MEA development.

08 HYDROGEN↗

Validation of NEAMS Tools Using MSRE Data

This report documents the benchmarks developed and performed for the tools and codes developed under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program utilizing the MSRE experiment data. There are three focus areas explored in this work: fuel evolution, CFD, and system transient analyses. Fuel depletion is important for MSR reactor physics and fuel cycle analysis. Fuel depletion capability is currently being developed in the Griffin reactor physics code. To support this, a benchmark problem is developed using the MSRE data and an existing depletion code with flowing fuel analysis functionality (ADDER) to validate this new capability in Griffin. The ADDER calculation is compared with the TRITON-MSR results as well as the MSRE experimental data. This benchmark can be directly used to verify and validate the Griffin fuel depletion capability in future years. For CFD simulation, the MSRE CAD model is obtained from the Copenhagen Atomics and a mesh is generated for the MSRE inlet plenum. The Nek5000 code will be employed to find the flow distribution in the MSRE inlet plenum based on the mesh generated. For system analysis, a simple benchmark problem for three types of MSR system transients is developed. The SAM and SPECTRA codes are used to solve the simple problem, and the results from the two codes agree well. The SAM code is also employed to obtain the frequency response of the MSRE system at the 5 and 8 MWt power levels. The results agree well with the experiment measurements. These verification and validation efforts gives SAM users more confidence in MSR system transient simulations using SAM. Lastly, the SAM-Griffin Multiphysics coupling work is initiated. A simple one-way coupling of evaluating the precursor drift effect on the MSRE k-eff is demonstrated. This preliminary coupling work serves as the basis for future more complex Multiphysics simulation and modelling.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental Validation of the Multi-Isotope Process Monitor Concept

Researchers from Pacific Northwest National Laboratory, in conjunction with personnel from The Ohio State University, are working to develop a system for monitoring spent nuclear fuel reprocessing facilities on-line, non-destructively, and in near-real-time. This method, known as the Multi-Isotope Process (MIP) Monitor, is based upon the measurement of distribution patterns of a suite of indicator (radioactive) isotopes present within particular process streams. Distribution patterns, monitored on-line by gamma spectrometry, are then compared in near-real-time to patterns representing "normal" process conditions using multivariate pattern recognition software. By targeting gamma-emitting indicator isotopes, the MIP Monitor approach is compatible with the use of small, portable, high-resolution gamma detectors that may be easily deployed throughout the facility. In addition, utilization of a suite of radio-elements, including ones with multiple oxidation states, increases the likelihood that attempts to divert material via process manipulation would be detected. Proof-of-principle modeling exercises simulating changes in acid strength have been completed and the results are promising. Laboratory validation is currently under way and significant results are available. The latest experimental results, along with an overview of the method will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Water Management In PEM Fuel Cell -“ A Lattice-Boltzmann Modeling Approach

In Proton Exchange Membrane Fuel Cells (PEMFCs), water management and the effective transport of water through the gas-diffusion-layer (GDL) are key issues for improved performance at high power density and for durability during freeze-thaw cycles. The diffusion layer is a thin (~150-350{micro}m), porous material typically composed of a web of carbon fibers and particles, and is usually coated with hydrophobic Teflon to remove the excess water through capillary action. In-situ diagnostics of water movement and gas-reactant transport through this thin opaque substrate is challenging. Numerical analyses are typically based on simplified assumptions, such as Darcy's Law and Leverett functions for the capillary pressure. The objective of this work is to develop a high fidelity CFD modeling and analysis tool to capture the details of multiphase transport through the porous GDL. The tool can be utilized to evaluate GDL material design concepts and optimize systems based on the interactions between cell design, materials, and operating conditions. The flow modeling is based on the Lattice Boltzmann Method (LBM). LBM is a powerful modeling tool to simulate multiphase flows. Its strength is in its kinetic theory based foundation, which provides a fundamental basis for incorporating intermolecular forces that lead to liquid-gas phase separation and capillary effects without resorting to expensive or ad-hoc interface reconstruction schemes. At the heart of the solution algorithm is a discrete form of the well-known Boltzmann Transport Equation (BTE) for molecular distribution, tailored to recover the continuum Navier-Stokes flow. The solution advances by a streaming and collision type algorithm, mimicking actual molecular physics, which makes it suitable for porous media involving complex boundaries. We developed a numerical scheme to reconstruct various porous GDL microstructures including Teflon loading. Single and multiphase LBM models are implemented to compute permeability. Predicted values are in good agreement with measured data. The present modeling approach resolves the GDL microstructures and captures the influence of fiber orientation on permeability and the influence of Teflon loading on the development of preferential flow paths through the GDL. These observations can potentially guide the development of novel GDL materials designed for efficient removal of water.

30 DIRECT ENERGY CONVERSION↗

THERMAL SAFETY MARGIN CALCULATION OF THE MP-2 EXPERIMENT IN THE ADVANCED TEST REACTOR

The Mini-Plate 2 (MP-2) irradiation test is a fueled experiment designed for irradiation in multiple test locations in the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL). The experiment is a drop-in test where small aluminum-clad fuel plate samples (mini plates) are cooled directly by the ATR Primary Coolant System (PCS) water. The MP-2 fuel plate experiment will be irradiated in several different irradiation locations of the ATR. This fueled experiment contains aluminum-clad fuel mini plates consisting of monolithic U-Mo. Four different types of fuel plates with fuel meat thickness and cladding are part of the MP-2 test. A thermal analysis has been performed on the MP-2 experiment. A method for calculating Departure from Nucleate Boiling Ratio (DNBR) and Flow Instability Ratio (FIR) during a reactivity transient using the commercial finite element and heat transfer code ABAQUS is discussed. At the start of an ATR cycle the heat generation rate of the fueled experiment is high and the heat rate multiplier from the outer shim control cylinders is low, while the reverse is true at the end of the ATR cycle. Thermal analyses at 10 day increments during the cycle calculate the DNBR and FIR during a reactivity transient. This technique calculates DNBR for the fuel plate surfaces and FIR for all water components for each finite element surface and node at various times during the ATR cycle. Heat rates vary with time during the transient calculation that are provided by a detailed physics analysis. Oxide growth on the fuel plates is also incorporated Results from the transient calculations are displayed with the ABAQUS post processor. By calculating these parameters at each location in the finite element model, conservatism is replaced with accuracy. This allows for a greater margin for the thermal hydraulic safety parameters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗