Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Energy Productivity of the High Velocity Algae Raceway Integrated Design (ARID-HV)

The ARID raceway is an effective method to maintain temperature in the optimal growing range. However, the energy input is excessive. Thus, the ARID-HV raceway was developed in order to reduce energy input requirements. This was accomplished by improving pumping efficiency and using a serpentine flow pattern in which the water flows through channels instead of over barriers. A prototype ARID-HV raceway was installed in Tucson, Arizona in order to evaluate the flow and energy requirements of the raceway. Preliminary results show continued high energy usage, but this paper explores the possible energy reductions with the new ARID-HV design with efficient propeller pumps and properly engineered channel lengths. Channel lengths are evaluated with Manning’s equation in order to determine the maximum channel length that could be implemented with the current pumping configuration

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Flexible Thermoelectric Devices of Ultrahigh Power Factor by Scalable Printing and Interface Engineering

Printing is a versatile method to transform semiconducting nanoparticle inks into functional and flexible devices. In particular, thermoelectric nanoparticles are attractive building blocks to fabricate flexible devices for energy harvesting and cooling applications. However, the performance of printed devices are plagued by poor interfacial connections between nanoparticles and resulting low carrier mobility. While many rigid bulk materials have shown a thermoelectric figure of merit ZT greater than unity, it is an exacting challenge to develop flexible materials with ZT near unity. Here, a scalable screen-printing method to fabricate high-performance and flexible thermoelectric devices is reported. A tellurium-based nanosolder approach is employed to bridge the interfaces between the BiSbTe particles during the postprinting sintering process. The printed BiSbTe flexible films demonstrate an ultrahigh room-temperature power factor of 3 mW m -1 K -2 and ZT about 1, significantly higher than the best reported values for flexible films. A fully printed thermoelectric generator produces a high power density of 18.8 mW cm -2 achievable with a small temperature gradient of 80 °C. This screen-printing method, which directly transforms thermoelectric nanoparticles into high-performance and flexible devices, presents a significant leap to make thermoelectrics a commercially viable technology for a broad range of energy harvesting and cooling applications.

36 MATERIALS SCIENCE↗

Electric field effect on superconductivity in La2−xSrxCuO4

We demonstrate a method to tune the carrier concentration of a high temperature superconductor over a wide range, using an applied electric field. Thin film devices were made in an electrical double layer transistor configuration utilizing an ionic liquid. In this way, the surfacecarrier density in La2-x Sr x CuO4 films can be varied between 0.01 and 0.14 carriers per Cu atom with a resulting change in critical temperature of 25 K (~70% of the maximum critical temperature in this compound). This allows one to study a large segment of the cuprate phase diagram without altering the level of disorder. We used this method [A. T. Bollinger et al., Nature 472, 458–460 (2011)] to study the quantum critical point at the superconductor to insulator phase transition on the underdoped side of superconducting dome, and concluded that this transition is driven by quantum phase fluctuations and Cooper pair delocalization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanocomposite thin films for high temperature optical gas sensing of hydrogen

The disclosure relates to a plasmon resonance-based method for H.sub.2 sensing in a gas stream at temperatures greater than about 500.degree. C. utilizing a hydrogen sensing material. The hydrogen sensing material is comprised of gold nanoparticles having an average nanoparticle diameter of less than about 100 nanometers dispersed in an inert matrix having a bandgap greater than or equal to 5 eV, and an oxygen ion conductivity less than approximately 10.sup.-7 S/cm at a temperature of 700.degree. C. Exemplary inert matrix materials include SiO.sub.2, Al.sub.2O.sub.3, and Si.sub.3N.sub.4 as well as modifications to modify the effective refractive indices through combinations and/or doping of such materials. At high temperatures, blue shift of the plasmon resonance optical absorption peak indicates the presence of H.sub.2. The method disclosed offers significant advantage over active and reducible matrix materials typically utilized, such as yttria-stabilized zirconia (YSZ) or TiO.sub.2.

36 MATERIALS SCIENCE↗

Mechano-hydrothermal synthesis of Mg{sub 2}Al–NO{sub 3} layered double hydroxides

A mechano-hydrothermal method was developed to synthesize Mg{sub 2}Al–NO{sub 3} layered double hydroxide (LDH) from MgO, Al{sub 2}O{sub 3} and NaNO{sub 3} as starting materials. A two-step synthesis was conducted, that is, a mixture of MgO and Al{sub 2}O{sub 3} was milled for 1 h, followed by hydrothermal treatment with NaNO{sub 3} solution. The resulting LDHs were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared and elemental analyses. Pre-milling played a key role in the LDH formation during subsequent hydrothermal treatment. The process is advantageous in terms of low reaction temperature and short reaction time compared with the conventional hydrothermal method, and the target products are of high crystallinity, good dispersion and regular shape compared with the conventional mechanochemical method. - Graphical abstract: The novel mechano-hydrothermal route to synthesize LDH has advantages in low reaction temperature and short reaction time, and the target product was of high crystallinity, good dispersion and regular shape. Display Omitted - Highlights: • A mechano-hydrothermal route was developed for layered double hydroxide synthesis. • Synthesis could be achieved at low temperature and in a short time. • Resulting layered double hydroxide samples were well dispersed and of regular shape. • A dissolution–recrystallization mechanism was proposed for the formation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Review of the Agard S&M panel evaluation program of the NASA-Lewis 'SRP' approach to high-temperature LCF life prediction

Twenty laboratories in six countries participated in this program, each testing its own materials of interest under its own laboratory conditions. In this way the results obtained provided validation of the Strainrange Partitioning (SRP) method for a wide range of materials and insured maximum usefulness to each of the participating laboratories. The first, very necessary step in the evaluation of any life prediction approach - assessing the ability of the method to predict life of simple laboratory specimens subjected to complex loading, was thereby taken. The culmination of this program was the Specialists Meeting that was held in Aalborg, Denmark in April of 1978. At that meeting the various investigators shared their findings, thus providing the basis for an in-depth evaluation of the SRP method. While the results were variable from laboratory to laboratory, most investigators agreed that the SRP method was a significant step toward life prediction in the presence of high temperature and cyclic stresses.

Hirschberg, M. H.↗

Use of inelastic strain as a basis for analyzing thermomechanical test data

It was shown that the proposed data analysis method, based on inelastic strain-time response, can be used effectively to represent cyclic response at elevated temperatures for Hastelloy-X. A high level of confidence in this method was built by making comparisons of the experimental and fitted data in two forms. Because of this level of confidence, the analysis was taken one step further and inelastic strain rates were calculated from the derivatives of the fit equations.

Bartolotta, P. A.↗

Thickness-Dependent Current Density and Flux Distribution in Thin Current-Carrying Superconducting Films Exposed to a Magnetic Field

With the rapid development of high-temperature superconductors, it is of great significance to get the precise current density and flux distribution within thin high-temperature superconducting films subjected to a transport current and an applied magnetic field. The transport current distribution and flux density in thin high-temperature superconducting films are calculated by a numerical method based on the Kim model and exponential model in this paper. The influences of transport current, applied magnetic field, width, and thickness of a superconducting film on the current distribution are discussed. The results reveal that the thickness has a significant effect on the critical current density of superconducting films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of plasma parameters on characteristics of silicon nitride film deposited by single and dual frequency plasma enhanced chemical vapor deposition

This work investigates the deposition of hydrogenated amorphous silicon nitride films using various low-temperature plasmas. Utilizing radio-frequency (RF, 13.56 MHz) and ultra-high frequency (UHF, 320 MHz) powers, different plasma enhanced chemical vapor deposition processes are conducted in the mixture of reactive N{sub 2}/NH{sub 3}/SiH{sub 4} gases. The processes are extensively characterized using different plasma diagnostic tools to study their plasma and radical generation capabilities. A typical transition of the electron energy distribution function from single- to bi-Maxwellian type is achieved by combining RF and ultra-high powers. Data analysis revealed that the RF/UHF dual frequency power enhances the plasma surface heating and produces hot electron population with relatively low electron temperature and high plasma density. Using various film analysis methods, we have investigated the role of plasma parameters on the compositional, structural, and optical properties of the deposited films to optimize the process conditions. The presented results show that the dual frequency power is effective for enhancing dissociation and ionization of neutrals, which in turn helps in enabling high deposition rate and improving film properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ultrahigh vacuum and low-temperature cleaning of oxide surfaces using a low-concentration ozone beam

We present a novel method of delivering a low-concentration (<15%) ozone beam to an ultra-high vacuum environment for the purpose of cleaning and dosing experimental samples through oxidation processing. The system described is safe, low-cost, and practical and overcomes the limitations of ozone transport in the molecular flow environment of high or ultrahigh vacuum whilst circumventing the use of pure ozone gas which is potentially highly explosive. The effectiveness of this method in removing surface contamination is demonstrated through comparison of high-temperature annealing of a simple oxide (MgO) in ozone and oxygen environments as monitored using quadrupole mass spectroscopy and Auger electron spectroscopy. Additionally, we demonstrate the potential of ozone for obtaining clean complex oxide surfaces without the need for high-temperature annealing which may significantly alter surface structure.

36 MATERIALS SCIENCE↗

Increasing the sampling efficiency of protein conformational transition using velocity-scaling optimized hybrid explicit/implicit solvent REMD simulation

The application of temperature replica exchange molecular dynamics (REMD) simulation on protein motion is limited by its huge requirement of computational resource, particularly when explicit solvent model is implemented. In the previous study, we developed a velocity-scaling optimized hybrid explicit/implicit solvent REMD method with the hope to reduce the temperature (replica) number on the premise of maintaining high sampling efficiency. In this study, we utilized this method to characterize and energetically identify the conformational transition pathway of a protein model, the N-terminal domain of calmodulin. In comparison to the standard explicit solvent REMD simulation, the hybrid REMD is much less computationally expensive but, meanwhile, gives accurate evaluation of the structural and thermodynamic properties of the conformational transition which are in well agreement with the standard REMD simulation. Therefore, the hybrid REMD could highly increase the computational efficiency and thus expand the application of REMD simulation to larger-size protein systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary study on applying the method of characteristics to pebble-bed HTR - 18637

Neutron transport in high temperature pebble-bed gas-cooled reactor, which is a promising generation IV reactor candidate with cylindrical core, graphite moderator and spherical TRISO coated particles fuel, is of great interest. However, the stochastic method namely Monte Carlo faces with tremendous simulation of particles and the conventional two-step method featured by homogenization only can give the scalar flux. In this paper, method of characteristics is trying to be applied to pebble bed reactor because of its advantages in arbitrary geometry and the ability to obtain solution in neutronically large domains. Some challenges occur when it comes to HTR. First, the amount of calculation and the memory requirement are huge due to the large quantities of spherical fuel and stochastic distribution of pebbles. Second, the arrangement of characteristics and ray tracing process is more complex comparing to LWR with cuboid geometry because the stochastic distribution of the spherical assemblies and the longer neutron mean free path in pebble bed HTR. Third, the treatment of the multiscale sphere fuel need be detail studied to determine the subdivision of flat source region. At present, preliminary research on this subject is undergoing. This paper is concentrated on the modeling of the pebble-bed reactor core by constructive solid geometry (CSG) which allows complex spatial models to be built using boolean operations, characteristics arrangement and the treatment of boundary condition. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Thermomechanical Processing for Improved Mechanical Properties of HT9 Steels

Thermomechanical processing (TMP) of ferritic–martensitic (FM) steels, such as HT9 (Fe–12Cr–1MoWV) steels, involves normalizing, quenching, and tempering to create a microstructure of fine ferritic/martensitic laths with carbide precipitates. HT9 steels are used in fast reactor core components due to their high-temperature strength and resistance to irradiation damage. However, traditional TMP methods for these steels often result in performance limitations under irradiation, including embrittlement at low temperatures (<~430 °C), insufficient strength and toughness at higher temperatures (>500 °C), and void swelling after high-dose irradiation (>200 dpa). This research aimed to enhance both fracture toughness and strength at high temperatures by creating a quenched and tempered martensitic structure with ultrafine laths and precipitates through rapid quenching and unconventional tempering. Mechanical testing revealed significant variations in strength and fracture toughness depending on the processing route, particularly the tempering conditions. Tailored TMP approaches, combining rapid quenching with limited tempering, elevated strength to levels comparable to nano-oxide strengthened ferritic alloys while preserving fracture toughness. For optimal properties in high-Cr steels for future reactor applications, this study recommends a modified tempering treatment, i.e., post-quench annealing at 500 °C or 600 °C for 1 h, possibly followed by a brief tempering at a slightly higher temperature.

36 MATERIALS SCIENCE↗

Ultrathin polyorganosilica membranes synthesized by oxygen-plasma treatment of polysiloxanes for H 2 /CO 2 separation

Oxygen plasma treatment of polydimethylsiloxane (PDMS) induces an ultrathin polyorganosilica (POSi) layer (<10 nm) on top of a PDMS membrane, leading to excellent H 2 /gas separation properties and providing a rapid and scalable way to fabricate robust silica membranes compared with conventional high-temperature and time-consuming sol-gel methods. Here, we thoroughly investigate POSi membranes derived from poly (dimethylsiloxane-co-methylhydroxidesiloxane) (poly (DMS-co-MHOS)) containing -SiOH groups that can be more easily converted to silica networks than the -SiCH 3 in PDMS. Further, the effect of the polysiloxane structure and plasma treatment conditions (including plasma generating powers, oxygen flowrate, chamber pressure, and treatment time) on the silica chemistry, structure, and H 2 /CO 2 separation properties are systematically determined to derive structure/property relationships. An optimized membrane exhibits H 2 permeance of 880 GPU and H 2 /CO 2 selectivity of 67 at 150 °C, superior to state-of-the-art polymeric membranes. The membrane retains H 2 /CO 2 selectivity as high as 46 when challenged with simulated syngas containing 2.8 mol% water vapor at 150 °C, demonstrating the potential of these POSi membranes for practical applications.

36 MATERIALS SCIENCE↗

Effect of annealing temperature and pH on morphology and optical property of highly dispersible ZnO nanoparticles

Highly dispersible zinc oxide nanoparticles were produced in large quantity via a simple solution method. The effect of temperature and pH impact on as-prepared ZnO nanoparticles with respect to the morphological and optical characteristics has been investigated. The average particle size of ZnO nanoparticles increased with increasing annealing temperature. A sharp UV band-edge emission was observed in as-prepared ZnO nanoparticles with negligibly less intense deep level emission. However, upon annealing at high temperature in air, UV band-edge emission disappears with an evolution of a broad deep level emission in photoluminescence spectra. Similarly, by adjusting the pH of reaction medium from 4 to pH = 8 using ammonium hydroxide solution, particle size gets bigger and bigger leads to red-shift in UV band-edge emission and an appearance of deep level emission peak. At pH = 8, well resolved sharp X-ray diffraction peaks were observed with lower FWHM values due to higher crystallite sizes.

36 MATERIALS SCIENCE↗

From nGy to MGy - New dosimetry with LiF:Mg,Cu,P thermoluminescence detectors

One of the well known advantages of thermoluminescence (TL) detectors made of lithium fluoride doped with magnesium, copper and phosphorus (LiF:Mg,Cu,P) is their very high sensitivity to ionizing radiation. LiF:Mg,Cu,P detectors enable measurements of radiation doses from tens of nanograys up to a few kilograys, when the total saturation of the signal of the so-called main dosimetric peak occurs. Only recently, unprecedented high-temperature emission of LiF detectors heated to temperatures up to 600 Degree-Sign C, was observed after exposures to radiation doses ranging from 1 kGy to 1 MGy. For quantification of the glow-curve shape changes of LiF:Mg,Cu,P detectors in this range of doses and determination of the absorbed dose, the Ultra-High Temperature Ratio coefficient (UHTR) was defined. This newly established dosimetric method was tested in a range of radiation qualities, such as gamma radiation, electron and proton beams, thermal neutron fields and high-energy mixed fields around the SPS and PS accelerators at CERN. The new method for ultra-high dose range monitoring with a single LiF:Mg,Cu,P detector, which is capable of covering at least twelve orders of magnitude of doses, can be used for dosimetry at high energy accelerators, thermonuclear fusion technology facilities and has great potential for accident dosimetry in particular. A number of dosimetric sets with LiF:Mg,Cu,P detectors are currently installed around the LHC at CERN.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Investigation of the Cause of Low Blister Threshold Temperatures in the RERTR-12 and AFIP-4 Experiments

Blister–threshold testing of fuel plates is a standard method through which the safety margin for operation of plate-type in research and test reactors is assessed. The blister-threshold temperature is indicative of the ability of fuel to operate at high temperatures for short periods of time (transient conditions) without failure. This method of testing was applied to the newly developed U-Mo monolithic fuel system. Blister annealing studies on the U-Mo monolithic fuel plates began in 2007, with the Reduced Enrichment for Research and Test Reactors (RERTR)-6 experiment, and they have continued as the U-Mo fuel system has evolved through the research and development process. Blister anneal threshold temperatures from early irradiation experiments (RERTR-6 through RERTR-10) ranged from 400 to 500°C. These temperatures were projected to be acceptable for NRC-licensed research reactors and the high-power Advanced Test Reactor (ATR) and the High Flux Isotope Reactor (HFIR) based on current safety-analysis reports (SARs). Initial blister testing results from the RERTR-12 experiment capsules X1 and X2 showed a decrease in the blister-threshold temperatures. Blister threshold temperatures from this experiment ranged from 300 to 400°C. Selected plates from the AFIP-4 experiment, which was fabricated using a process similar to that used to fabricate the RERTR-12 experiment, also underwent blister testing to determine whether results would be similar. The measured blister-threshold temperatures from the AFIP-4 plates fell within the same blister-threshold temperature range measured in the RERTR-12 plates. Investigation of the cause of this decrease in bister threshold temperature is being conducted under the guidance of Idaho National Laboratory PLN-4155, “Analysis of Low Blister Threshold Temperatures in the RERTR-12 and AFIP-4 Experiments,” and is driven by hypotheses.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Centrosymmetric or Noncentrosymmetric? Transition Metals Talking in K 2 TGe 3 S 8 (T = Co, Fe)

Two new quaternary sulfides K 2 TGe 3 S 8 (T=Co, Fe) have been synthesized by a high-temperature solid-state routine and flux growth method. The crystal growth process of K 2 TGe 3 S 8 (T=Co, Fe) was elucidated by in-situ powder X-ray diffraction and DSC thermal analysis. The mm-sized crystals of K 2 TGe 3 S 8 (T=Co, Fe) were grown. K 2 CoGe 3 S 8 crystallizes in a new structure type in centrosymmetric space group P1¯ (No. 2) with unit cell parameters of a = 7.016(1) Å, b = 7.770(1)Å, c = 14.342(1) Å, α = 93.80(1)°, β = 92.65(1)°, γ = 114.04(1)°. K 2 FeGe 3 S 8 crystallizes in K 2 FeGe 3 Se 8 structure type and the noncentrosymmetric space group P2 1 (No. 4) with unit cell parameters of a = 7.1089(5)Å, b = 11.8823(8)Å, c = 16.7588(11)Å, β = 96.604(2)°. There is a high structural similarity between K 2 CoGe 3 S 8 and K 2 FeGe 3 S 8 . The larger volume coupled with higher degrees of distortion of [FeS 4 ] tetrahedra compared to [CoS 4 ] tetrahedra accounts for the structure’s shift from centrosymmetric to noncentrosymmetric. The theory simulation confirms that [TS 4 ]T= Co or Fe tetrahedra play a crucial role in controlling the structure and properties of K 2 TGe 3 S 8 (T = Co, Fe). The measured optical bandgaps of K 2 CoGe 3 S 8 and K 2 FeGe 3 S 8 are 2.1(1) eV and 2.6(1) eV respectively. K 2 FeGe 3 S 8 shows antiferromagnetic ordering at 24K while no magnetic ordering was detected in K 2 CoGe 3 S 8 . In conclusion, the magnetic measurements also demonstrate the divalent nature of transition metals in K 2 TGe 3 S 8 (T = Co, Fe).

36 MATERIALS SCIENCE↗