Search NASA⌕ Search

SEARCH · Search NASA

Results for “Integral equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

A note on the effect of bending stiffness of stringers attached to a plate with a crack

An infinite stringer partially bonded to a plate through a layer of adhesive is considered. The stringer had bending as well as longitudinal stiffness. The effect of the stringer's bending rigidity on the stress intensity factor at the tip of the crack is illustrated. Shear stress distribution between the plate and the stringer and the stress intensity factors are obtained from the solution of a system of Fredholm integral equations. The continuity of displacements along the line of bond is represented by the equations.

Arin, K.↗

Penny-shaped crack in a fiber-reinforced matrix

Using a slender inclusion model developed earlier, the elastostatic interaction problem between a penny-shaped crack and elastic fibers in an elastic matrix is formulated. For a single set and for multiple sets of fibers oriented perpendicularly to the plane of the crack and distributed symmetrically on concentric circles, the problem was reduced to a system of singular integral equations. Techniques for the regularization and for the numerical solution of the system are outlined. For various fiber geometries numerical examples are given, and distribution of the stress intensity factor along the crack border was obtained. Sample results showing the distribution of the fiber stress and a measure of the fiber-matrix interface shear are also included.

Narayanan, T. V.↗

Contact and crack problems for an elastic wedge

The contact and the crack problems for an elastic wedge of arbitrary angle are considered. The problem is reduced to a singular integral equation which, in the general case, may have a generalized Cauchy kernel. The singularities under the stamp as well as at the wedge apex were studied, and the relevant stress intensity factors are defined. The problem was solved for various wedge geometries and loading conditions. The results may be applicable to certain foundation problems and to crack problems in symmetrically loaded wedges in which cracks initiate from the apex.

Erdogan, F.↗

A finite-element method for lifting surfaces in steady incompressible subsonic flow

The problem of potential steady subsonic flow for lifting surfaces is considered. This problem requires the solution of an integral equation relating the value of the potential discontinuity on the lifting surface and its wake to the values of the normal derivative of the potential which are known from the boundary conditions. The lifting surface is divided into small (quadrilateral hyperboloidal) surface elements, which are described in terms of the Cartesian components of the four corner points. The values of the potential discontinuity and the normal derivative of the potential are assumed to be constant within each element and equal to their values at the centroids of the elements. This yields a set of linear algebraic equations. Numerical results are in good agreement with existing ones.

Morino, L.↗

Prediction of unsteady aerodynamic loadings caused by leading edge and trailing edge control surface motions in subsonic compressible flow: Computer program description

A digital computer program has been developed to calculate unsteady loadings caused by motions of lifting surfaces with leading edge or trailing edge controls based on the subsonic kernel function approach. The pressure singularities at hinge line and side edges have been extracted analytically as a preliminary step to solving the integral equation by collocation. The program calculates generalized aerodynamic forces for user supplied deflection modes. Optional intermediate output includes pressure at an array of points, and sectional generalized forces. From one to six controls on the half span can be accommodated.

Redman, M. C.↗

Downward continuation of gravity information from satellite to satellite tracking or satellite gradiometry in local areas

Integral formulas in the parameter domain are used instead of a representation by spherical harmonics. The neglected regions will cause a truncation error. The application of the discrete form of the integral equations connecting the satellite observations with surface gravity anomalies is discussed in comparison with the least squares prediction method. One critical point of downward continuation is the proper choice of the boundary surface. Practical feasibilities are in conflict with theoretical considerations. The properties of different approaches for this question are analyzed.

Rummel, R.↗

Prediction of unsteady aerodynamic loadings caused by leading edge and trailing edge control surface motions in subsonic compressible flow: Analysis and results

A theoretical analysis and computer program was developed for the prediction of unsteady lifting surface loadings caused by motions of leading edge and trailing edge control surfaces having sealed gaps. The final form of the downwash integral equation was formulated by isolating the singularities from the nonsingular terms and using a preferred solution process to remove and evaluate the downwash discontinuities in a systematic manner. Comparisons of theoretical and experimental pressure data are made for several control surface configurations. The comparisons indicate that reasonably accurate theoretical pressure distributions and generalized forces may be obtained for a wide variety of control surface configurations. Spanwise symmetry or antisymmetry of motion, and up to six control surfaces on each half span can be accommodated.

Rowe, W. S.↗

Removal of seeing and instrumental blur effects from astronomical scanner observations

The Phillips-Twomey method for solving simultaneous integral equations is applied to the problem of removing blur effects arising from atmospheric and instrumental sources from astronomical observations made with photoelectric area-scanning instruments. Details of the method and the effects of observational errors on the quality of the results are discussed in the context of applications to actual observations of stars and the planet Saturn.

Clements, A. E.↗

A corrugated horn antenna using V-shape corrugations

Corrugated horns use corrugations on the E-plane walls that are operating in the cutoff condition. In this paper, attention is focused on replacing the rectangular shaped corrugation with a V-shaped corrugation. The properties of the V corrugations are obtained using an integral equation solution; the results of the computational studies indicate that for operation of the V corrugations in the forbidden zone the depth of the corrugations lie between 0.3125 to 0.625 times the wavelength in contrast to the rectangular corrugations where the corresponding depth is 0.25 to 0.5 times the wavelength. The radiation patterns and impedance of two identical rectangular horns with corrugated E-plane walls using either V or rectangular corrugations are directly compared.

Mentzer, C. A.↗

Advanced panel-type influence coefficient methods applied to subsonic flows

An advanced technique for solving the linear integral equations of three-dimensional subsonic potential flows (steady, inviscid, irrotational and incompressible) about arbitrary configurations is presented. It involves assembling select, logically consistent networks whose construction comprises four tasks, which are described in detail: surface geometry definition; singularity strength definition; control point and boundary condition specification; and calculation of induced potential or velocity. The technique is applied to seven wing examples approached by four network types: source/analysis, doublet/analysis, source/design, and doublet/design. The results demonstrate the forgiveness of the model to irregular paneling and the practicality of combined analysis/design boundary conditions. The appearance of doublet strength mismatch is a valuable indicator of locally inadequate paneling.

Johnson, F. T.↗

The use of local basis functions in unsteady aerodynamics

This paper reports a successful demonstration of using local basis functions to solve Kussner's integral equation for unsteady airloads. Pressure basis functions are defined over relatively small subsets of the aerodynamic surface and are zero elsewhere. This formulation combines the accuracy and smoothness of distribution methods with the simplicity and versatility of panel methods. Application is made to subsonic compressible flow about oscillating planar surfaces with controls. Numerical results are presented. Convergence with respect to panel size, extensions to more general classes of solutions, and areas needing additional investigation are discussed.

Fromme, J.↗

The inclusion problem with a crack crossing the boundary

A solution is given to the problems of a crack in an elastic inclusion with one or both ends approaching and terminating at the interface, of two collinear cracks (one in the inclusion and one in the matrix), and of a crack crossing the interface. The problems are formulated in terms of a system of singular integral equations. In the second case, the dominant parts of the kernels become generalized Cauchy kernels giving rise to stress singularities of powers other than one over the square root. For this case stress intensity factors are defined and some detailed results are presented for various crack-inclusion geometries and material combinations.

Erdogan, F.↗

Critical point parameters of helium

Calculations of the critical point parameters of the helium isotopes using integral equation closures for the pair distribution function are reported for two pair potentials.

Bruch, L. W.↗

A half plane and a strip with an arbitrarily located crack

The paper introduces a technique to deal with the problem of an elastic domain containing an arbitrarily oriented internal crack. The problem is formulated as a system of integral equations for a fictitious layer of body forces imbedded in the plane along a closed smooth curve encircling the original domain. The problems of a half plane with a crack in the neighborhood of its free boundary and of an infinite strip containing a symmetrically located internal crack with an arbitrary orientation are considered as examples. In each case the stress intensity factors are computed and are given as functions of the crack angle.

Erdogan, F.↗

A note on the effect of lateral bending stiffness of stringers attached to a plate with a crack

An infinite stringer which is assumed to be partially bonded to a plate through a layer of adhesive is considered. The stringer is assumed to have bending as well as longitudinal stiffness. The effect of the stringer's bending rigidity on the stress intensity factor at the tip of the crack is illustrated. Shear stress distribution between the plate and the stringer and the stress intensity factors will be obtained from the solution of a system of Fredholm integral equations which represent the continuity of displacements along the line of bond.

Arin, K.↗

Transverse cracks in a strip with reinforced surfaces

The symmetrical problem of two transverse cracks in an elastic strip with reinforced surfaces is formulated in terms of a singular integral equation. The special cases of one central crack or two edge cracks are discussed. Numerical methods for solving the problems with internal cracks are outlined and stress intensity factors are presented for various geometries and degrees of surface reinforcement.

Krenk, S.↗

Elliptical cutouts in cylindrical shells

The stress concentrations due to an elliptical cutout in a shallow cylindrical shell are determined by means of a system of singular integral equations, solved numerically. Three loading conditions are considered: tension, and internal pressure. Results confirm those obtained by previous authors by other methods and extend the range of parameters over which results are available.

Tsai, C.-J.↗