Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Shifting Valencies and Magnetic Responses in La-Based High-Entropy Oxide Perovskite Thin Films with Variable Mn Presence

Chemical disorder in compositionally complex perovskite oxides generates a broad distribution of exchange pathways and spin states, but the microscopic origin and spatial homogeneity of the resulting magnetic phases remain debated. Here, we tune the Mn fraction (x = 0.2–0.6) in epitaxial La(Cr, Mn, Fe, Co, Ni)O3 thin films and resolve the coupled evolution of valence, spin state, and magnetism using element-specific x-ray absorption spectroscopy and x-ray magnetic circular dichroism (XMCD). Mn enrichment drives an internal redistribution of charge, in which Mn evolves toward a Mn3+-rich mixed valence, while Co converts from predominantly Co3+ to high-spin Co2+. This valence/spin-state coupling amplifies the Mn- and Co-derived ferromagnetic response by nearly an order of magnitude while increasing the magnetic onset temperature to at least 250 K, whereas Fe and Cr remain essentially trivalent with weak dichroism. Depth-resolved low-energy muon spin spectroscopy (LE-μSR) shows magnetic homogeneity through the film thickness, with a secondary relaxation maximum near 25 K indicating a low-temperature dynamical crossover consistent with frustrated magnetism in a strongly disordered spin lattice.

Miertschin, Duncan [Baylor University]↗

Magnetic Response of Excitons and Excitonic Complexes in Defective Hexyl Ammonium Lead Iodide Self-Assembled Quantum Wells

Correlating the magnetic behavior of low-dimensional semiconductors with the chemistry used to form these excitonic materials remains crucial to the development of devices applied to quantum technologies. In this study, we apply large magnetic fields during the collection of low-temperature photoluminescence (PL) to assess the magnetic properties of excitons in hexyl ammonium lead iodide (HA 2 PbI 4 ) self-assembled quantum wells (SAQWs) formed at liquid−liquid interfaces. The effect of incident laser power and temperature was used to assign lower energy features in these samples’ PL spectra to both excitons trapped at defect sites and trions. Measured peaks shifts allow us to estimate coupling between the applied magnetic fields and the charged defect excitons. Our conclusions are supported by density functional theory calculations on supercells of the proposed defective HA 2 PbI 4 SAQW structure. Additionally, we find an anomalous magnetic response from trion states that resembles the behavior of interacting excitonic complexes in similar, quantum-confined materials at low temperatures. These results highlight the crucial role that chemical conditions can play in the magnetic response of 2D semiconductors applied in quantum technologies.

defect chemistry↗

Amplifying Magnetic Field Effects on Upconversion Emission via Molecular Qubit-Driven Triplet–Triplet Annihilation

Triplet-triplet annihilation (TTA) enables photon upconversion by combining two lower-energy triplet excitons to produce a higher-energy singlet exciton. This mechanism enhances light-harvesting efficiency for solar energy conversion and enables the use of lower-energy photons in bioimaging and photoredox catalysis applications. The magnetic modulation of such high-energy excitons presents an exciting opportunity to develop molecular quantum information technologies. While the spin dynamics of triplet exciton pairs are sensitive to external magnetic fields, the magnetic field effects (MFEs) associated with these pairs are generally limited by spin statistics to at most 10% at low fields (<1 Tesla), making them challenging to apply in technological advancements. In contrast, MFEs on spin-correlated radical pairs (SCRPs) can be significantly greater, surpassing those on triplet pairs. By using SCRPs-based molecular qubits as triplet sensitizers in the sensitized TTA scheme, we can magnetically modulate TTA and consequently, the delayed fluorescence of annihilators. In our current system, we have achieved more than 70% magnetic modulation of delayed fluorescence, effectively harnessing and even amplifying magnetic modulation within SCRPs to influence high-energy excitons. In conclusion, this work opens new opportunities for advancing spin-controlled chemical reactions and molecular quantum information technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunneling current-controlled spin states in few-layer van der Waals magnets

Abstract Effective control of magnetic phases in two-dimensional magnets would constitute crucial progress in spintronics, holding great potential for future computing technologies. Here, we report a new approach of leveraging tunneling current as a tool for controlling spin states in CrI 3 . We reveal that a tunneling current can deterministically switch between spin-parallel and spin-antiparallel states in few-layer CrI 3 , depending on the polarity and amplitude of the current. We propose a mechanism involving nonequilibrium spin accumulation in the graphene electrodes in contact with the CrI 3 layers. We further demonstrate tunneling current-tunable stochastic switching between multiple spin states of the CrI 3 tunnel devices, which goes beyond conventional bi-stable stochastic magnetic tunnel junctions and has not been documented in two-dimensional magnets. Our findings not only address the existing knowledge gap concerning the influence of tunneling currents in controlling the magnetism in two-dimensional magnets, but also unlock possibilities for energy-efficient probabilistic and neuromorphic computing.

Science & Technology - Other Topics↗

Magnetically and optically active edges in phosphorene nanoribbons

Abstract Nanoribbons, nanometre-wide strips of a two-dimensional material, are a unique system in condensed matter. They combine the exotic electronic structures of low-dimensional materials with an enhanced number of exposed edges, where phenomena including ultralong spin coherence times 1,2 , quantum confinement 3 and topologically protected states 4,5 can emerge. An exciting prospect for this material concept is the potential for both a tunable semiconducting electronic structure and magnetism along the nanoribbon edge, a key property for spin-based electronics such as (low-energy) non-volatile transistors 6 . Here we report the magnetic and semiconducting properties of phosphorene nanoribbons (PNRs). We demonstrate that at room temperature, films of PNRs show macroscopic magnetic properties arising from their edge, with internal fields of roughly 240 to 850 mT. In solution, a giant magnetic anisotropy enables the alignment of PNRs at sub-1-T fields. By leveraging this alignment effect, we discover that on photoexcitation, energy is rapidly funnelled to a state that is localized to the magnetic edge and coupled to a symmetry-forbidden edge phonon mode. Our results establish PNRs as a fascinating system for studying the interplay between magnetism and semiconducting ground states at room temperature and provide a stepping-stone towards using low-dimensional nanomaterials in quantum electronics.

Science & Technology - Other Topics↗

Unraveling the electronic structure and magnetic transition evolution across monolayer, bilayer, and multilayer ferromagnetic Fe 3 GeTe 2

Two-dimensional (2D) van der Waals (vdW) magnets have sparked widespread attention due to their potential in spintronic applications as well as in fundamental physics. Ferromagnetic vdW compound Fe 3 GeTe 2 (FGT) and its Ga variants have garnered significant interest due to their itinerant magnetism, correlated states, and high magnetic transition temperature. Experimental studies have demonstrated the tunability of FGT’s Curie temperature, T C , through adjustments in quintuple layer numbers (QL) and carrier concentrations, n. However, the underlying mechanism remains elusive. In this study, we employ molecular beam epitaxy (MBE) to synthesize 2D FGT films down to 1 QL with precise layer control, facilitating an exploration of the band structure and the evolution of itinerant carrier density. Angle-resolved photoemission spectroscopy (ARPES) reveals significant band structure changes at the ultra-thin limit, while first-principles calculations elucidate the band evolution from 1 QL to bulk, largely governed by interlayer coupling. Additionally, we find that n is intrinsically linked to the number of QL and temperature, with a critical value triggering the magnetic phase transition. Our findings underscore the pivotal role of band structure and itinerant electrons in governing magnetic phase transitions in such 2D vdW magnetic materials.

36 MATERIALS SCIENCE↗

Pressure-induced changes in structure, magnetic order and superconductivity in the ferromagnetic topological insulator MnBi 8 Te 13

Introducing superconductivity (SC) in an intrinsic magnetic topological system remains a significant challenge in modern condensed matter physics. Here, we show that SC can be induced by applying high pressure to a promising ambient-pressure magnetic topological insulator candidate, MnBi 8 Te 13 . Using electrical transport, magnetic susceptibility, and synchrotron x-ray diffraction, we construct a detailed temperature - pressure phase diagram. The ambient-pressure ferromagnetic order is progressively suppressed and replaced by an antiferromagnetic state. Above 16.6 GPa, bulk SC emerges with a critical temperature up to 6.8 K. This pressure-induced SC may co-exist with another AFM dome. In contrast, the related compounds with higher magnetic ion (Mn) concentration show no SC, highlighting the crucial role of Mn concentration in stabilizing SC. The observation of pressure-induced FM-AFM-SC transitions in MnBi 8 Te 13 not only establishes it as a rare Mn-based SC but also provides a platform to study the interplay between magnetism, SC, and potentially nontrivial band topology in correlated magnetic materials.

Huyan, S. [Ames Laboratory, and Iowa State Univ., ↗

Magnon spin current from a non-collinear magnetic phase in a compensated rare earth ferrimagnet

The rare earth iron garnets have been commonly treated like ferromagnets due to the strong exchange coupling between the Fe3+ sublattices. However, the exchange coupling between the rare earth (RE) and transition metal (TM) in the RE-TM compounds is relatively weak and cannot hold the magnetic moments rigidly in a collinear state upon effective anisotropy energy. In this work, we show that a non-collinear magnetic phase is readily presented for a rare earth ferrimagnetic insulator, gadolinium iron garnet (GdIG), when a small magnetic field (H) is applied in the hard axis. We excite magnons from both the collinear and non-collinear magnetic configuration in GdIG via the spin Seebeck effect and detect these magnons in the adjacent normal metal. The comparison between the collinear and non-collinear magnetic configurations reveals a comparable magnon compensating temperature (TMM) for both cases. Moreover, as temperature decreases, the in-plane component of the magnon from the non-collinear case enhances and becomes comparable with that of the collinear case at TMM, representing the dominant role Gd3+ 4f spin plays at low T. Our study shows a wide magnetic tunability in the compensated ferrimagnetic insulator, which offers a myriad of opportunities for magnonic applications.

Physics↗

Self-generated magnetic fields in the hot spot of direct-drive cryogenic implosions at Omega

This work reports that Biermann self-generated magnetic fields of ≈200 MG and Hall parameters of ≈1.5 are produced in the stagnation phase of direct-drive cryogenic implosions at Omega. The magnetic fields produce a drop of 2.4% in fusion yield and 1% in ion temperature. A quantitative estimate of the effect of self-generated magnetic fields on yield and ion temperature is essential, since direct measurements of these fields are not available. Reconstructed simulations of the 50 Gbar implosions, with all the stagnation measurements reproduced simultaneously by a combination of mid- and low-mode asymmetries as degradation mechanisms [Bose et al., Phys. Plasmas 25, 062701 (2018)], are used to obtain the estimates. The magnetic fields cause a decrease in yield due to the Righi–Leduc heat flow, which exceeds any benefits from heat flow suppression due to magnetization. It is important to note that both direct-drive Omega-scale implosions and indirect-drive National Ignition Facility (NIF)-scale implosions [Walsh et al., Phys. Rev. Lett. 118, 155001 (2017)] produce similar estimates for the magnetic field strength, and both show a decrease in fusion yield, with the Righi–Leduc transport as the loss mechanism. However, the yield degradation at Omega is small and lower by ≈5× compared to the indirect-drive ignition-scale NIF estimate.

Physics↗

Design and modeling of indirectly driven magnetized implosions on the NIF

The use of magnetic fields to improve the performance of hohlraum-driven implosions on the National Ignition Facility (NIF) is discussed. The focus is on magnetically insulated inertial confinement fusion, where the primary field effect is to reduce electron-thermal and alpha-particle loss from the compressed hotspot (magnetic pressure is of secondary importance). We summarize the requirements to achieve this state. The design of recent NIF magnetized hohlraum experiments is presented. These are close to earlier shots in the three-shock, high-adiabat (BigFoot) campaign, subject to the constraints that magnetized NIF targets must be fielded at room-temperature, and use ≲1 MJ of laser energy to avoid the risk of optics damage from stimulated Brillouin scattering. We present results from the original magnetized hohlraum platform, as well as a later variant that gives a higher hotspot temperature. In both platforms, imposed fields (at the capsule center) of up to 28 T increase the fusion yield and hotspot temperature. Integrated radiation-magneto-hydrodynamic modeling with the Lasnex code of these shots is shown, where laser power multipliers and a saturation clamp on cross-beam energy transfer are developed to match the time of peak capsule emission and the P2 Legendre moment of the hotspot x-ray image. The resulting fusion yield and ion temperature agree decently with the measured relative effects of the field, although the absolute simulated yields are higher than the data by 2.0−2.7×. The tuned parameters and yield discrepancy are comparable for experiments with and without an imposed field, indicating the model adequately captures the field effects. Self-generated and imposed fields are added sequentially to simulations of one BigFoot NIF shot to understand how they alter target dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of zero and reversed magnetic shear on resistive wall modes in a straight limiter tokamak with zero beta

Advanced tokamak scenarios often feature equilibriums with zero and reversed magnetic shear. To isolate and investigate their impacts on the resistive wall mode (RWM) instability analytically, we construct a series of cylindrical limiter equilibriums with different magnetic shear in the core and toward plasma edge, as a prototype of the configurations in advanced tokamak scenarios. Equilibriums with zero β are considered so that the analysis focuses on the current-driven RWMs. Analytical solutions for the n=1 resistive wall mode, derived from the reduced ideal magnetohydrodynamics (MHD) equations, consistently demonstrate key insights for both the core and the edge: the growth rate of RWMs is inversely proportional to the averaged magnetic shear when the safety factor at the edge (qa) is held constant. Specifically, an increase in positive averaged magnetic shear results in a decreased growth rate, whereas an increase in negative averaged magnetic shear leads to an increased growth rate. Furthermore, the influence of nqa on the mode's stability significantly surpasses the effects of magnetic shear changes previously discussed. These analytical calculation results provide a verification of NIMROD simulations.

Wan, Sui (ORCID:0009000464121677)↗

Burn propagation in magnetized high-yield inertial fusion

Recent experiments at the National Ignition Facility (NIF) have demonstrated ignition for the first time in an inertial confinement fusion (ICF) experiment, a major milestone allowing the possibility of high energy gain through burn propagation. Use of external magnetic fields, applied primarily to reduce thermal losses, could increase hotspot temperature and ease requirements for ignition, opening up the capsule design space for high energy gain. However, this same restriction of thermal transport has the potential to inhibit burn propagation, which is vital in the attainment of high gain. In this work, radiation-magnetohydrodynamics (MHD) simulations carried out using the code Chimera are used to investigate the effect of a pre-imposed magnetic field on ignition and burn propagation. This paper studies the propagation of burn using both an idealized planar model and in fully integrated 2D MHD simulations of an igniting NIF capsule. A study of magnetized burn propagation in the idealized planar model identifies three regimes of magnetized burn propagation: (1) thermal conduction driven; (2) alpha transport driven; and (3) fully suppressed burn. Simulations of NIF shot N210808 with an applied 40 T axial field show clear indication of burn suppression perpendicular to field lines, with rapid burn observed along field lines. Implosion shape is altered by the field, and anisotropic conduction causes significant modification to the rate of ablation during stagnation. These results highlight the fundamental changes to implosion dynamics in high-yield magnetized ICF and motivate further study to better optimize future magnetized target designs for high gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The accuracy of multi-group models for nonlocal electron transport in magnetized plasmas

In the extreme conditions of inertial confinement fusion experiments, heat flow plays a vital role, but local diffusive models frequently break down and overestimate the heat flow. The situation becomes more complicated again in the significant magnetic fields generated during laser–plasma interactions or in magnetized fusion schemes. Accurate non-local and magnetized heat flow computations can be carried out using Vlasov–Fokker–Planck (VFP) simulations, but these are computationally expensive. There is, therefore, significant interest in using faster multi-group models to accurately calculate the non-local heat flow in magnetized plasmas. We benchmark two such multi-group models for calculating the heat flow, M1 and hybrid-AWBS-BGK, against diffusive models and full VFP simulations, before applying the models to realistic example test cases, both magnetized and unmagnetized. We find that the multi-group models generally perform very well for moderate non-localities up to kλmfp∼0.01, but the computational cost increases dramatically. hybrid-AWBS-BGK performs more effectively than M1 at high non-localities, up to kλmfp∼1, due to its adaptive solver and robust P1 closure, but tends to fail in very strong magnetic fields. Both codes are much faster than VFP simulations but are still slow in steep temperature gradients.

Arran, C. (ORCID:0000000286448118)↗

Spin-informed universal graph neural networks for simulating magnetic ordering

The screening and discovery of magnetic materials are hindered by the computational cost of first-principles density-functional theory (DFT) calculations required to find the ground state magnetic ordering. Although universal machine-learning interatomic potentials (uMLIPs), also known as atomistic foundation models, offer high-fidelity models of many atomistic systems with significant speedup, they currently lack the inputs required for predicting magnetic ordering. In this work, we present a data-efficient, spin-informed graph neural network framework that incorporates spin degrees of freedom as inputs and preserves physical symmetries, extending the functionality of uMLIPs to simulate magnetic orderings. This framework speeds up DFT calculations through better initial guesses for magnetic moments, determines the ground-state ordering of bulk materials and even generalizes to magnetic ordering in surfaces. Furthermore, we implement a closed-loop anomaly detection approach that effectively addresses the classic "chicken-and-egg" problem of creating a high-quality dataset while developing a uMLIP, unearthing anomalies in large benchmark datasets and boosting model accuracy.

Xu, Wenbin↗

Manipulation of Localized Excitons in CrPS4 by Temperature and Magnetic Field

Layered van der Waals magnetic semiconductors provide a versatile platform for exploring excitonic phenomena intertwined with spin and lattice degrees of freedom, enabling excitons to act as sensitive probes of magnetic order. CrPS4 is a layered antiferromagnetic semiconductor that hosts rich excitonic features whose microscopic origin and connection to magnetic ordering remain incompletely understood. Here, we investigate the electronic and excitonic properties of bulk CrPS4 using a combination of many-body perturbation theory, dynamical mean-field theory, and photoluminescence-based experiments. Our calculations establish CrPS4 as a direct-gap semiconductor with a bandgap of 2.48 eV in the antiferromagnetic phase. Several subbandgap excitonic transitions are predicted by theory, comprising multiple spin-allowed excitons and an additional spin-flip excitation, predominantly localized on the Cr3+ ions. Temperature- and magnetic-field-dependent optical measurements reveal thermally driven exciton redistribution among localized states and identify characteristic energy shifts that provide clear optical signatures of magnetic phase transitions in CrPS4. These results provide insights into the excitonic transitions of antiferromagnets and suggest potential routes for all-optical sensing and light-driven control of their magnetic order.

2D materials↗

On the trapped magnetic moment in type-II superconductors

In this article, measurements of the trapped (remanent) magnetic moment, M trap (H) , when a small magnetic field H is turned off after cooling below the superconducting transition temperature, T c , or ramping a magnetic field up and down after cooling in a zero magnetic field, offer substantial advantages in difficult cases of small samples and large field-dependent backgrounds, which is relevant for hydrogen-based ultra-high-T c superconductors (UHTS). Until recently, there was no need for a separate paper on the trapped magnetic flux for well-known critical-state models due to the simplicity of the physics involved. However, recent publications showed the need for such an analysis. This note summarizes the expectations for the Bean model with constant critical current density and the Kim model with field-dependent critical currents. It is shown that if the trapped moment is fitted to the power law, M trap $\propto$ H a , the fixed exponent α = 2 is exact for the Bean model, while Kim models show a wide interval of possible values, 2$\leqslant$a$\leqslant$4. Furthermore, accounting for reversible magnetization expands the range of possible exponents to 1$\leqslant$a$\leqslant$4. In addition, demagnetizing factors are essential and make the trapped moment orientation dependent even in isotropic materials. As a concrete application, it is shown that flux trapping experiments performed on H 3 S UHTS compounds can be well described using this generalized approach, lending further support to the type-II superconducting nature of H 3 S under ultra-high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Mechanical Analysis of Bi-2212 Rutherford Cable in a Cos-Theta Sub-Scale Dipole Coil

The U.S. Magnet Development Program (US-MDP) explores high-field accelerator magnets compatible with operational conditions beyond the limits of Nb$_3$Sn technology. The ongoing R&D High-Temperature Superconductors (HTS) suggests using Bi$_2$Sr$_2$CaCu$_2$O$_{8-x}$ (Bi-2212) as superconducting element. Bi-2212 Rutherford cables maintain a high critical current (I$_C$) when exposed to a large external magnetic field. However, Bi-2212 exhibits an oversensitive stress-strain response when subject to large Lorentz forces. This paper reports on the magnetic and mechanical analysis of the Bi-2212 cosine-theta insert being developed at Fermilab for a hybrid magnet composed of two external layers of Nb$_3$Sn and two internal layers of Bi-2212. We performed a FEM analysis of the insert to estimate the HTS stress state in the coil's strands under magnetic and mechanical loads.

43 PARTICLE ACCELERATORS↗

Magnetic geometry effects on turbulent density fluctuations in Wendelstein 7-X

Line-integrated density fluctuation measurements from the core of the optimised stellarator Wendelstein 7-X (W7-X) are studied in the context of magnetic field geometry changes. The amplitude as well as the spectral distribution of fluctuations is affected by varying the magnetic field configuration. Weaker turbulent fluctuations are observed in configurations with higher rotational transform and lower magnetic mirror depth. Simulations with the gyrokinetic codes stella and GENE-3D are used to investigate the role of magnetic geometry for the experimental observations. The stabilising effect of the high rational transform configuration is reproduced by simulations and can be associated with stronger shaping of the magnetic field. This leads to increased finite Larmor radius and local shear effects, which limit the toroidal extent of ion temperature gradient (ITG) modes. For W7-X configurations with higher magnetic mirror depth, gyrokinetic theory and simulations predict weaker fluctuations, since they are closer to having the maximum-J property, which has a stabilising effect on trapped-electron mode and ITG. The opposite trend is observed experimentally, which can therefore not be explained by geometry effects on turbulence alone.

Wendelstein-7X↗