Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETOMETERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

The latitudinal variation of geoelectromagnetic disturbances during large ( Dst ≤ ₋100 nT) geomagnetic storms

Geoelectromagnetic disturbances (GMDs) are an important consequence of space weather that can directly impact many types of terrestrial infrastructure. In this paper, we analyze 30 years of SuperMAG magnetometer data from the range of magnetic latitudes 20°≤λ≤75° to derive characteristic latitudinal profiles for median GMD amplitudes. Based on this data, we obtain a parameterization of these latitudinal profiles of different types of GMDs, providing an analytical fit with Dst-dependent parameters. Finally, we also obtain probabilistic estimates for the magnitudes of “100 year” GMDs, finding that $\dot{_B}$ = 6.9 (3.60–12.9) nT/s should be expected at 45°≤λ< 50°, exceeding the 5 nT/s threshold for dangerous inductive heating.

58 GEOSCIENCES↗

SAPS-associated explosive brightening on the dusk-side: A new type of onset-like disturbance: A new type of onset-like disturbance

Quasi-periodic energetic particle injections have been observed at geosynchronous orbit on the dusk-side during a steady magnetospheric convection event. Here, we examine high resolution auroral imager data and ground magnetometer data associated with the first of these injections and conclude that it was not associated with classical substorm signatures. It is proposed that these injections are caused by the explosive non-linear growth of a shear-flow-ballooning instability in the region where sub-auroral polarization streams (SAPS) also occur. It is suggested that interchange will occur preferentially in the low-conductivity SAPS region since the magnetic Richardson number is lowest there and the ‘line-tying’ effect will also be least stabilizing there. We also propose that the observed particle injection signatures and auroral morphology constitute a new type of SAPS-associated explosive ‘onset-like’ disturbance that can occur during intervals of strong convection.

58 GEOSCIENCES↗

Curl up with a good B : detecting ultralight dark matter with differential magnetometry

Ultralight dark matter (such as kinetically mixed dark-photon dark matter or axionlike dark matter) can source an oscillating magnetic-field signal at the Earth’s surface, which can be measured by a synchronized array of ground-based magnetometers. The global signal of ultralight dark matter can be robustly predicted for low masses, when the wavelength of the dark matter is larger than the radius of the Earth, $λ_{DM}$ $\gg$ R. However, at higher masses, environmental effects, such as the Schumann resonances, can become relevant, making the global magnetic-field signal B difficult to reliably model. In this work, we show that ∇ × B is robust to global environmental details, and instead only depends on the local dark matter amplitude. We therefore propose to measure the local curl of the magnetic field at the Earth’s surface, as a means for detecting ultralight dark matter with $λ_{DM}$ ≲ R. As this measurement requires vertical gradients, it can be done near a hill/mountain. Our measurement scheme not only allows for a robust prediction, but also acts as a background rejection scheme for external noise sources. We show that our technique can be the most sensitive terrestrial probe of dark-photon dark matter for frequencies 10 Hz ≤ $f_{A'}$ ≤ 1 kHz (corresponding to masses 4 × 10 –14 eV ≤ $m_{A'}$ ≤ 4 × 10 –12 eV). It can also achieve sensitivities to axionlike dark matter comparable to the CAST helioscope, in the same frequency range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Searching for axion forces with spin precession in atoms and molecules

We propose to use atoms and molecules as quantum sensors of axion-mediated monopole-dipole forces. We show that electron spin precession experiments using atomic and molecular beams are well-suited for axion searches thanks to the presence of co-magnetometer states and single-shot temporal resolution. Experimental strategies to detect axion gradients from localised sources and the earth are presented, taking ACME III as a prototype example. Other possibilities including atomic beams, and laser-cooled atoms and molecules are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Synthesis and Characterization of Hydrophobic Fe{sub 3}O{sub 4} Magnetic Nanoparticles with High Saturation Magnetization

A simple one-step solvothermal method is proposed to prepare hydrophobic Fe{sub 3}O{sub 4} nanoparticles (MNPs) using iron acetylacetonate (Fe(acac){sub 3}), oleylamine (OAm), and ethylene glycol (EG). X-ray powder diffraction, scanning electron microscope, infrared spectroscopy, transmission electron microscopy, X-ray photoelectron spectrometry, and vibrating sample magnetometer are used to characterize the structure, morphology, and properties of products. The testing results indicate that the as-synthesized products are spherical-like hydrophobic MNPs, superparamagnetic at room temperature, with a saturation magnetization up to 76.8 emu/g. The good hydrophobic property of MNPs is attributed to the coverage of oleylamine, without causing a remarkable loss of magnetic property. In addition, the influences of material ratio, aging time, oleic acid, and stearic acid used as additives are studied in our research.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Optical and Magnetic Properties of PANI/Se{sub 0.95}Fe{sub 0.05} Nanocomposites

Polyaniline (PANI) coupled with Se{sub 0.95}Fe{sub 0.05} in various weight percentage (5 and 10 wt%) were formed by in situ polymerization method of PANI in the presence of Se{sub 0.95}Fe{sub 0.05}. The functionality of the investigated nanocomposites was investigated by X-ray diffraction (XRD), Fourier transform infrared (FTIR), vibrating sample magnetometer (VSM), and photoluminescence (PL) analyses. The structural characteristics of PANI and the existence of Se{sub 0.95}Fe{sub 0.05} together with PANI were confirmed using XRD. The different functional groups of nanocomposite were studied using FTIR. PANI/Se{sub 0.95}Fe{sub 0.05} nanocomposites exhibited a weak ferromagnetic behavior. Law of Approach to saturation was used to determine the saturation magnetization of nanocomposites samples. The PL of PANI and nanocomposites emitted five emissions in violet and blue ranges. The PL intensity of the emission peaks is significantly reduced when Se{sub 0.95}Fe{sub 0.05} is introduced to PANI matrix.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic properties of friction stir processed composite

There are many existing inspection systems each with their own advantages and drawbacks. These usually comprise of semi-remote sensors which frequently causes difficulty in reaching complex areas of a component. This study proposes to overcome that difficulty by developing embedded functional composites. Through this route, embedding can be achieved in virtually any component part and can be periodically interrogated by a reading device. The “reinforcement rich” processed areas can then be utilized to record properties like strain, temperature, stress state etc. depending on the reinforcement material. In this work, friction stir processing (FSP) was utilized to fabricate a magnetostrictive composite by embedding galfenol particles into a nonmagnetic aluminum (Al) matrix. It targets to develop a composite that produces strain in a varying magnetic field. Reinforcements were observed to be distributed uniformly in the matrix. Magnetization curves were studied using a vibrating sample magnetometer (VSM). A simple and cheap setup was developed to measure the magnetostrictive strain of the composites. Important factors affecting the magnetic properties were identified and ways to improve the magnetic properties discussed.

Das, Shamiparna↗

Dielectric and magnetic properties of microwave-absorbing FeAl x O y catalysts fabricated via solution combustion synthesis

Iron-based alumina (FeAl x O y ) nanocomposites are microwave-absorbers and catalysts, which makes them promising for emerging microwave-assisted thermocatalytic technologies. Solution combustion synthesis (SCS) has been used to synthesize FeAl x O y powders, and prior work has demonstrated that adjusting SCS parameters significantly changes phase composition and specific surface area of the products. However, it is unclear how synthesis parameters affect their microwave-absorbing properties, which are essential for optimizing microwave-assisted technologies. To address this challenge, in the present work, twelve different FeAl x O y products were synthesized at different combinations of the SCS parameters such as two fuels (citric acid and glycine), two heating modes (hotplate and muffle furnace), and three Fe:Al molar ratios (2:1, 1:1, 1:2). Dielectric and magnetic properties of the products were characterized using a network analyzer and a vibrating sample magnetometer. Based on the measured permittivity and permeability, penetration depth and reflection loss were calculated as a function of frequency and bed thickness. The products were heated by microwaves at 2.45 GHz and then examined with X-ray diffraction (XRD) analysis. For all products, the magnetic saturation was lower than for bulk iron oxides because of the small crystallite size and aluminum substitution. The use of glycine induced high dielectric losses and enabled fast microwave-heating rates compared to citric acid. Higher Fe:Al ratio also led to higher dielectric and magnetic losses. With glycine fuel, SCS in a furnace induced larger penetration depth and lower microwave absorption than SCS on a hotplate. The minimization of reflected power was more sensitive to the thickness of the product bed than to the frequency of the electromagnetic field. Post-heating XRD analysis revealed different phase transformations in the FeAl x O y powders depending on the SCS parameters. As a result, an FeAl x O y material, synthesized via incipient wetness impregnation, lacked magnetic losses and did not heat well as compared to the SCS products.

Combustion synthesis↗

Ultra-high aspect ratio pores milled in diamond via laser, ion and electron beam mediated processes

Microfabrication techniques are critical for the rapid prototyping and development of applications for cutting edge materials. Recently diamond has gained considerable interest for quantum photonic, biosensing, inertial confinement fusion and magnetometer applications. In this article, ultra-high aspect ratio milling of diamond micropores by photon, ion and electron based methods is reported. A multiphoton absorption laser ablation approach is revealed to rapidly produce sub-10 μm diameter micropores in diamond with an aspect ratio of 14:1 and a tapered profile at the surface interface. Chemically active, oxygen focused ion beam milling produces high-aspect ratio pores in diamond with an aspect ratio of 65:1 and minimal tapering over the length of the pore, overcoming the physical interaction volume limitations imposed in conventional gallium based focused ion beam milling and laser ablation methods. Oxygen-mediated electron beam induced etching is revealed to negate the limitations imposed by physical sputtering mechanisms utilized in focused ion beam milling via the direct initiation of chemical reactions at the receding surface, producing aspect ratios on the order of 200:1. Numerical simulations reveal the physical basis for the superior aspect-ratio pore milling of the oxygen focused ion beam milling and electron beam induced etching methods. Our results demonstrate direct-write methods for the fabrication of ultra-high aspect micropores in diamond and provide insight into the underlying mechanisms of these physical processes. The three methods demonstrated here can be interchanged for applications based on the desired characteristic aspect ratio and process throughput.

36 MATERIALS SCIENCE↗

Feasibility of FDEM cross-dipole and TDEM loop sources for monitoring CO 2 at the Kemper CarbonSAFE site

Electromagnetics has been shown to be a viable tool to monitor CO 2 plumes embedded in saline reservoirs. However, the majority of studies focus on measuring the electric field, which requires cumbersome equipment in the field and it is difficult to install permanent measurement stations. Magnetic field receivers offer an opportunity to reduce the form factor of the survey and increase the mobility by utilizing upcoming technologies, such as drones. We explore the use of frequency-domain electric dipole sources, and timedomain loops with a focus on measuring the secondary magnetic field at the surface for a conceptual injection scenario based on the Kemper CarbonSAFE site. We find that electric dipole sources give a response above the sensitivity of current sensor technology and, therefore, be a viable tool for CO 2 monitoring. The time domain loop source does provide fields that are useful for determining the location of the CO 2 plume, however the field magnitude is below the sensitivity of the current generation of instruments. To explore the use of a potential borehole receiver we generate a map of the magnetic field at depth to explore potential borehole placement for monitoring efforts. Finally, we limit the spatial extent of the electric dipole survey to a single parcel of land to help understand how the fields change with survey geometry. We find that the shape of the secondary fields change slightly with the small transmitter, but are still measurable provided that the cultural noise at the site is low. Thus, we conclude that at the Kemper site a frequency-domain cross-dipole source with magnetometer receivers is suitable to monitor the expansion of the CO 2 plume in the saline reservoir, even with a limited transmitter footprint on the surface.

58 GEOSCIENCES↗

Uncertainty analysis of steady-state measurements with a hot-filament type calorimetric emissometer

Calorimetric emissometers measure total hemispherical emissivity by measuring the heat transferred from a heated sample to its surroundings under a vacuum. The accuracy of emissometers standardized by the ASTM C835-06 are well understood. This work uses the Guide to the Evaluation of Uncertainty in Measurement (GUM) for the propagation uncertainties for an ASTM compliant emissometer. The GUM method was able to develop a measurement model and expressions to determine the uncertainty for other emissometers of this type. Data on ‘as-received’ Hastelloy X was used to develop a detailed uncertainty analysis of the emissivity measurement. Data on ‘as-received’ SS 347 and sandblasted A387 Gr. 91 and previous data by the group on A508/A533B were used to determine uncertainty over the ranges 0.16 to 0.81. For all samples, relative uncertainties in emissivities varied from 0.77% to 2.5% when using a fluxgate magnetometer sensor (FMS) to measure the DC heating current. Data on Hastelloy X using a Hall-effect sensor for DC current and low alloy steel showed the DC current and voltage across the test section to be dominate sources of uncertainty. When these sources were reduced, the specimen temperature and the surface area of the test sections were main sources of uncertainty in the emissivity, especially at higher temperatures. As thermal expansion of the surface was considered in the calculations, correlation between specimen temperature and surface area was examined. It was found to be a small contribution to emissivity's uncertainty despite the differences in linear CTE and its uncertainty for the materials analyzed in this study. For low temperatures, the chamber temperature can be a significant source of uncertainty if not sufficiently cooled. The GUM was also briefly compared to uncertainty from the 2nd and 3rd expansions of the Taylor series. We found that the results were the same when rounding to two significant figures.

42 ENGINEERING↗

Constructing magnetic polyaniline/metal hybrid nanostructures using polyaniline/Fe{sub 3}O{sub 4} composite hollow spheres as supports

Polyaniline (PANI)/Fe{sub 3}O{sub 4} composite hollow spheres have been successfully synthesized in one step using sulfonated polystyrene (PS) spheres as templates. The magnetic PANI hollow spheres were used as supports for noble metal nanoparticles (NPs) such as Au and Pd. The morphology, composition and magnetic properties of the resulting products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, inductively coupled plasma (ICP) atomic spectra and vibrating sample magnetometer. The catalytic activity of magnetic PANI/Au composite shells on the oxidation of dopamine was investigated by cyclic voltammetry. The obtained results provide our product with a practical application for the detection of dopamine. On the other hand, the catalytic activity of magnetic PANI/Pd composite shells on the reduction of 4-nitroaniline was investigated by spectroscopic methods and compared with Pd/C catalyst which was already widely used in industrial production. - Graphical abstract: TEM image of PANI/Fe{sub 3}O{sub 4} hollow spheres which can be used as supports for a variety of catalysts such as noble metal nanoparticles. Based on the unique properties of polyaniline hollow spheres and Fe{sub 3}O{sub 4} NPs, we designed the synthesis of polyaniline/Fe{sub 3}O{sub 4} NPs composite hollow spheres as supports for catalysts such as noble metal NPs. As a result, the obtained composites exhibit enhanced catalytic activities and can be easily separated from reaction mixture by using an NdFeB permanent magnet.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

One-dimensional NiCuZn ferrite nanostructures: Fabrication, structure, and magnetic properties

Ni{sub 0.5-x}Cu{sub x}Zn{sub 0.5}Fe{sub 2}O{sub 4} (0.0{<=}x{<=}0.5) ferrite nanofibers with diameters of 80-160 nm have been prepared by electrospinning and subsequent heat treatment. Both the average grain size and lattice parameter are found to increase with the addition of copper. Fourier transform infrared spectra indicate that the portion of Fe{sup 3+} ions at the tetrahedral sites move to the octahedral sites as some of the substituted Cu{sup 2+} ions get into the tetrahedral sites. Vibrating sample magnetometer measurements show that the coercivity of these ferrite nanofibers decreases with increasing Cu concentration, whereas the specific saturation magnetization initially increases, reaches a maximum value at x=0.2 and then decreases with the Cu content further increase. Notable differences in magnetic properties at room temperature (298 K) and 77 K for the Ni{sub 0.3}Cu{sub 0.2}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanofibers and corresponding powders are observed and mainly arise from the grain size and morphological variations between these two materials. - Graphical abstract: NiCuZn ferrite nanofibers with diameters of 80-160 nm have been prepared by electrospinning technique and their magnetic behavior is different from that of the corresponding powder sample.

36 MATERIALS SCIENCE↗

Synthesis, characterization and magnetic behavior of Co/MCM-41 nano-composites

Synthesis, structure and magnetic properties of Co/MCM-41 as magnetic nano-composites have been investigated. Mesoporous materials with different degrees of metal loading were prepared by wet impregnation and characterized by ICP, XRD, N{sub 2} adsorption, UV–vis DRS, TPR and EPMA-EDS. Cobalt oxide clusters and Co{sub 3}O{sub 4} nano-particles could be confined inside the mesopores of MCM-41, being this fact favored by the Co loading increasing. In addition, larger crystals of Co{sub 3}O{sub 4} detectable by XRD also grow on the surface when the Co loading is enhanced. The magnetic characterization was performed in a SQUID magnetometer using a maximum magnetic applied field µ{sub 0}Ha=1 T. While the samples with the higher Co loadings showed a behavior typically paramagnetic, a superparamagnetic contribution is more notorious for lower loadings, suggesting high Co species dispersion. - Graphical abstract: Room temperature hysteresis loops as a function of the Co content. Display Omitted - Highlights: • Co species as isolated Co{sup 2+}, oxide clusters and Co{sub 3}O{sub 4} nano-particles were detected. • For higher Co loads were detected, by XRD, Co{sub 3}O{sub 4} particles on the external surface. • The confining of Co species inside the mesopores was achieved by increasing Co load. • Paramagnetism from oxide clusters/nano-particles becomes dominant for higher Co loads. • Superparamagnetism can be assigned to Co species of small size and finely dispersed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of Dy additions on the magnetocaloric effect in Gd{sub 0.97}V{sub 0.03} alloys

The influence of Dy on the magnetocaloric effect in Gd{sub 0.97-x}Dy{sub x}V{sub 0.03} (x = 0.1, 0.2, 0.3) alloys has been studied. These alloys were prepared by arc melting on a water-cooled copper hearth under an argon atmosphere. The magnetization behavior has been analyzed by X-ray diffraction and a vibrating sample magnetometer. Results indicate that the Curie points of Gd{sub 0.97-x}Dy{sub x}V{sub 0.03} alloys decrease linearly with increasing content of Dy. The values of maximum magnetic entropy change ({delta}S{sub M}) and relative cooling power (RCP) for x = 0 {approx} 0.2 is larger than that of Gd alone over a wider temperature range. The Gd{sub 0.97-x}Dy{sub x}V{sub 0.03} alloys have promising potential as working substance candidates for magnetic refrigeration due to their tunable Curie temperature and the favorable properties of the magnetocaloric effect.

36 MATERIALS SCIENCE↗

Ferromagnetic behavior of copper oxide-nanowire-covered carbon fibre synthesized by thermal oxidation

Copper oxide nanowires were synthesized on carbon fibre surfaces by annealing of copper thin films at 400 deg. C for 4 h in air. The nanowires were characterized with field emission scanning electron microscope (FESEM), transmission electron microscope (TEM) and X-ray diffraction (XRD). The magnetic properties of CuO nanowires were measured with a vibrating sample magnetometer (VSM). Its diameters range covered 40-100 nm and lengths range covered 1-3 {mu}m. It is interesting that the CuO nanowires on the carbon fibres showed ferromagnetism at room temperature.

36 MATERIALS SCIENCE↗

Study of physical properties of cobalt oxide (Co{sub 3}O{sub 4}) nanocrystals

Cobalt oxide nanocrystals of size 10-15 nm have been prepared by a simple co-precipitation method. The structural investigations have been performed with X-ray diffraction and Transmission Electron Microscopy. Specific surface area of the nanocrystals is 77.5 x 10{sup 4} cm{sup 2}/g which have been calculated by X-ray diffraction data. Optical properties are discussed with UV/visible spectroscopy which shows the multiple band gap energies 2.28 eV (O{sup -II} {yields} Co{sup II}) and 1.57 eV (O{sup -II} {yields} Co{sup III}) which suggest the possibility of degeneracy of the valence band. The magnetic behavior is investigated using Vibrating Sample Magnetometer. The Co{sub 3}O{sub 4} nanocrystals possess paramagnetic character at room temperature.

36 MATERIALS SCIENCE↗

Carriers-mediated ferromagnetic enhancement in Al-doped ZnMnO dilute magnetic semiconductors

Nano-crystalline Zn{sub 0.95-x}Mn{sub 0.05}Al{sub x}O (x = 0, 0.05, 0.10) dilute magnetic semiconductors (DMS) were synthesized by sol-gel derived auto-combustion. X-ray diffraction (XRD) analysis shows that the samples have pure wurtzite structure typical of ZnO without the formation of secondary phases or impurity. Crystallite sizes were approximated by Scherrer formula while surface morphology and grain sizes were measured by field emission scanning electron microscopy. Incorporation of Mn and Al into the ZnO structure was confirmed by energy-dispersive X-ray analysis. Temperature dependent electrical resistivity measurements showed a decreasing trend with the doping of Al in ZnMnO, which is attributable to the enhancement of free carriers. Vibrating sample magnetometer studies confirmed the presence of ferromagnetic behavior at room temperature. The results indicate that Al doping results in significant variation in the concentration of free carriers and correspondingly the carrier-mediated magnetization and room temperature ferromagnetic behavior, showing promise for practical applications. We attribute the enhanced saturation magnetization and electrical conductivity to the exchange interaction mediated by free electrons.

36 MATERIALS SCIENCE↗