Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear structure data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Strain gauge for testing microreactor hexagonal core blocks in the Single Primary Heat Extraction and Removal Emulator

To support the development and deployment of microreactor technologies, experiments that help verify and validate reactor systems and components are performed at non-nuclear test facilities. The Single Primary Heat Extraction Removal Emulator at Idaho National Laboratory is one of these test facilities and was used to monitor a test article that has a prototypic geometry of a heat-pipe cooled microreactor core block. To collect crucial temperature and strain data during testing, temperature and strain sensing fiber optics were embedded to the surface of the test article using an ultrasonic additive manufacturing technique. To support and provide benchmark strain data for the embedded sensors, a commercial resistive strain gauge was attached. This report will discuss the results from the deployment of the commercial strain gauge which includes the setup/attachment strategies, data acquisition, and analysis of the strain data.

36 MATERIALS SCIENCE↗

Equipment for subcriticality monitoring by pulse method - 240

At the present time methods and means of determining, evaluating, and monitoring the effective neutron multiplication factor or the subcriticality are becoming very important for validating and monitoring nuclear safety in connection with the accumulation of a large number of spent fuel assemblies and the transition to a more tight mode of their storage arrangement in the spent-fuel pools of NPP. Pulse method is an effective subcriticality monitoring tool for subcritical reactors and spent nuclear fuel storages. This method is based on the use neutron generator, fission chambers and instrumentation for data acquisition and processing. The measurement and control equipment was designed. It allows: neutron pulses generation with specified parameters; neutron flux response monitoring by measuring the count rate at predetermined set of sequential time intervals; data transmitting to the personal computer; data processing and subcriticality calculation; self diagnostics and health monitoring; data recording, archiving and storage. The special device is proposed to check the electronic equipment. This device simulates a signal of a neutron detector counting rate after neutron generator pulses appear. The paper presents hardware structure and composition, specification and software of the control unit, which provides neutron generator operation, data acquisition and processing. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Multiscale Bayesian Data Integration Approach for Mapping Air Dose Rates around the Fukushima Daiichi Nuclear Power Plant - 17166

This paper presents a multiscale data integration method to estimate the spatial distribution of air dose rates in the regional scale around the Fukushima Daiichi Nuclear Power Plant. We integrate various types of datasets, such as ground-based walk and car surveys, and airborne surveys, all of which have different scales, resolutions, spatial coverage, and accuracy. This method is based on geo-statistics to represent spatial heterogeneous structures, and also on Bayesian hierarchical models to integrate multiscale, multi-type datasets in a consistent manner. The Bayesian method allows us to quantify the uncertainty in the estimates, and to provide the confidence intervals that are critical for robust decision-making. Although this approach is primarily data-driven, it has great flexibility to include mechanistic models for representing radiation transport or other complex correlations. We demonstrate our approach using three types of datasets collected at the same time over Fukushima City, Japan: (1) coarse-resolution airborne surveys covering the entire area, (2) car surveys along major roads, and (3) walk surveys in multiple neighborhoods. Results show that the method can successfully integrate three types of datasets in a consistent manner, and create an integrated map (including the confidence intervals) of air dose rates over the domain in high resolution. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Coupled Calculations in Helical Steam Generator: Validation on Legacy Data

The NEAMS program aims to develop an integrated multi-physics simulation capability “pellet-to-plant” for the design and analysis of future generations of nuclear power plants. In particular, the Reactor Product Line code suite's multi-resolution hierarchy is being designed to ultimately span the full range of length and time scales present in relevant reactor design and safety analyses, as well as scale from desktop to petaflop computing platforms. Flow-induced vibration (FIV) is widespread problem in energy systems because they rely on fluid movement for energy conversion. Vibrating structures may be damaged as fatigue or wear occurs. Given the importance of reliable components in the nuclear industry, flow-induced vibration has long been a major concern in safety and operation of nuclear reactors. In particular, nuclear fuel rods and steam generators have been known to suffer from flow-induced vibration and related failures. Advanced reactors, such as integral Pressurized Water Reactors (PWRs) considered for Small Modular Reactors (SMR), often rely on innovative component designs to meet cost and safety targets. One component that is the subject of advanced designs is the steam generator, some designs of which forego the usual shell-and-tube architecture in order to fit within the primary vessel. In addition to being more cost- and space-efficient, such steam generators need to be more reliable, since failure of the primary vessel represents a potential loss of coolant and a safety concern. A significant amount of data exists on flow-induced vibration in shell-and-tube heat exchangers, and heuristic methods are available to predict their occurrence based on a set of given assumptions. In contrast, advanced designs have far less data available. Advanced modeling and simulation based on coupled structural and fluid simulations have the potential to predict flow-induced vibration in a variety of designs, reducing the need for expensive experimental programs, especially at the design stage. Over the past five years, the Reactor Product Line has developed the integrated multi-physics code suite SHARP. The goal of developing such a tool is to perform multi-physics neutronics, thermal/fluid, and structural mechanics modeling of the components inside the full reactor core or portions of it with a user-specified fidelity. In particular SHARP contains high-fidelity single-physics codes Diablo for structural mechanics and Nek5000 for fluid mechanics calculations. Both codes are state-of-the-art, highly scalable tools that have been extensively validated. These tools form a strong basis on which to build a flow-induced vibration modeling capability. In this report we discuss one-way coupled calculations performed with Nek5000 and Diablo aimed at simulating available FIV experiments in helical steam generators in the turbulent buffeting regime. In this regime one-way coupling is judged sufficient because the pressure loads do not cause substantial displacements. It is also the most common source of vibration in helical steam generators at the low flows expected in integral PWRs. The legacy data is obtained from two datasets developed at Argonne and B&W.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design and requirements of a hydrogen component reliability database (HyCReD)

Hydrogen technologies are expected to play a key role in the decarbonization of several sectors including energy storage and transportation. Rigorous investigation and quantification of the risk and reliability issues associated with hydrogen technologies will be critical to ensuring both their wider adoption and safe, economical operations. Quantitative risk assessment (QRA) is an important tool that has been used to enable the safe deployment of many engineering systems, including hydrogen fueling stations and hydrogen storage systems. However, QRA studies require reliability data which is currently lacking for expanding applications of hydrogen systems. Here, to address this gap, we present a new structure for a hydrogen component reliability database (HyCReD) that can be used to generate reliability data to be used in QRA, reliability, safety studies, maintenance planning, and more. Building on our previous work examining four major hydrogen safety data collection tools (West et al., 2022) [1], our approach in this work was to consult scientific literature on reliability data collection as well as a number of existing reliability engineering databases in the oil & gas, chemical processing, and nuclear power plant sectors. The evaluation of these databases led to identifying best practices to be implemented in a data collection framework for a hydrogen component reliability database. Based on these best practices, a set of 24 requirements for the proposed database are presented, covering its characteristics and the types of data to be collected. We define the structure of the HyCReD database and 25 data elements to be collected, spanning system description, failure, shutdown, or near-miss events, and maintenance events. The data elements are then defined according to international standards used in the safety and reliability practice and potential choice lists are provided for each field. Since this database is being piloted for hydrogen fueling stations, a generic station component hierarchy developed by West (2021) [2] is used to standardize system data. Finally, we demonstrate populating the database with information extracted from five narrative reports on hydrogen fueling station incidents.

08 HYDROGEN↗

Local magnetic cluster size identified by neutron total scattering in the site-diluted spin glass S n x F e 4 - x N ( x = 0.88 )

A detailed structure analysis for the site-diluted Sn x Fe 4- x N ( x = 0.25, 0.41, and 0.88) has been carried out through complex modeling of the neutron total scattering data. We present quantitative evidence showing the local ferromagnetic cluster size extending to ~8 Å on average when Sn 0.88 Fe 3.12 N undergoes the spin-glass transition (the other two not showing such a transition). In conclusion, the modeling methodology used in this work involving the corefinement of the nuclear and magnetic structure in both real and reciprocal space can potentially be applied generally to explore a variety of spin-glass material problems.

36 MATERIALS SCIENCE↗

Insight into a highly polymorphic endophyte isolated from the roots of the halophytic seepweed Suaeda salsa: Laburnicola rhizohalophila sp. nov. (Didymosphaeriaceae, Pleosporales)

In this work, we surveyed root endophytic fungi of the coastal halophyte Suaeda salsa and detected a population of a novel species that we described here as Laburnicola rhizohalophila sp. nov. No sexual sporulating structure was observed. Instead, it produced a large amount of thalloconidia, 0–1 transverse septa, hyaline to darkly pigmented, often peanut-shaped and sometimes dumbbell-shaped, both ends enlarged with numerous oil droplets inside the hyphal cells. Surprisingly, a high degree of phenotypic and physiological intraspecific variation (e.g., salinity tolerance, growth under different carbon:nitrogen ratios, and carbon utilization pattern) was recorded. The inoculation test indicated that the isolates could successfully infect host roots and form microsclerotia-like structures in cortical cells, a typical trait of dark septate endophytes (DSEs). Furthermore, most isolates were shown to promote host seedling growth. To evaluate conspecificity and infer its phylogenetic affinity, multiloci data including nuclear rRNA loci (ITS1 and 2, partial 28S), partial RNA Polymerase II second-largest subunit ( rpb2 ), and partial translation elongation factor-1α ( tef1 ) were characterized. Genealogical concordance phylogenetic species recognition (GCPSR) detected a genetically isolated clade of L. rhizohalophila within the Pleosporales in the Didymosphaeriaceae. Maximum likelihood phylogenetic reconstruction revealed that the endophytic fungus was genetically close to L aburnicola dactylidis but separated by a relatively long genetic distance. Our work highlights that the pleosporalean taxa might represent an underexplored reservoir of root DSEs.

59 BASIC BIOLOGICAL SCIENCES↗

Neutron capture of UO 2 targets prepared by spin-coating assisted combustion synthesis

Two uranium dioxide (UO 2 ) targets of (414 ± 23) nm and (1092 ± 93) nm thicknesses were prepared on 6061 aluminum alloy and puratronic grade aluminum backing materials. The targets were deposited with a novel method combining spin coating and solution combustion synthesis (SCS). The target layers consisted of small (3–7 nm) UO 2 grains and uniformly distributed ultra-small (1–3 nm) pores. The prepared targets were tested at the Los Alamos National Laboratory’s LANSCE facility for neutron irradiation damage and suitability for neutron capture experiments. The samples showed no signs of target material loss after the irradiation. However, irradiation caused a significant increase in the grain size (4–10 nm), as well as upward mass diffusion and coalescence of the pores due to the thermal spikes. The magnesium in the aluminum 6061 alloy backing also diffused into the UO 2 layer during neutron irradiation. The structural changes in the target after the irradiation do not affect the data from neutron capture. As a result, the new method can be used more broadly to prepare other actinide targets for nuclear physics experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nuclear resonance vibrational spectroscopy reveals the FeS cluster composition and active site vibrational properties of an O 2 -tolerant NAD + -reducing [NiFe] hydrogenase

Hydrogenases are complex metalloenzymes that catalyze the reversible splitting of molecular hydrogen into protons and electrons essentially without overpotential. The NAD+-reducing soluble hydrogenase (SH) from Ralstonia eutropha is capable of H 2 conversion even in the presence of usually toxic dioxygen. The molecular details of the underlying reactions are largely unknown, mainly because of limited knowledge of the structure and function of the various metal cofactors present in the enzyme. Here, all iron-containing cofactors of the SH were investigated by 57 Fe specific nuclear resonance vibrational spectroscopy (NRVS). Our data provide experimental evidence for one [2Fe2S] center and four [4Fe4S] clusters, which is consistent with the amino acid sequence composition. Only the [2Fe2S] cluster and one of the four [4Fe4S] clusters were reduced upon incubation of the SH with NADH. This finding explains the discrepancy between the large number of FeS clusters and the small amount of FeS cluster-related signals as detected by electron paramagnetic resonance spectroscopic analysis of several NAD+-reducing hydrogenases. For the first time, Fe–CO and Fe–CN modes derived from the [NiFe] active site could be distinguished by NRVS through selective 13 C labeling of the CO ligand. This strategy also revealed the molecular coordinates that dominate the individual Fe–CO modes. The present approach explores the complex vibrational signature of the Fe–S clusters and the hydrogenase active site, thereby showing that NRVS represents a powerful tool for the elucidation of complex biocatalysts containing multiple cofactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New hints to the cause of the EMC effect

Deep-inelastic scattering cross section ratios plotted as a function of Bjorken x show that quark structure in nuclei is different than in free nucleons. Recent EMC type data from Jefferson Lab's Hall C show that the slope in the 0.3 < x < 0.7 region scales as the local nuclear density and not the average nuclear density. This result led to the comparison between x > 1 short-range correlation plateaus and the magnitude of the EMC effect slope. A clear linear relation between the two effects has now been shown. In this paper, the EMC effect, the short-range correlation plateaus and a possible reason for a relationship between the two is discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Delayed Neutron Precursor Group Parameter and Spectra Generation from Fast Fission of 235U in SCALE

Delayed neutron precursor (DNP) group data are important for modeling reactor dynamics. Although the data for individual DNPs have been developed over time, the DNP group data present in the Evaluated Nuclear Data Files (ENDF) have not been updated in the past 20 years. In this work, we use SCALE to recreate the Godiva experiment that was used to generate the original DNP group structure for fast fission of 235U. However, each DNP is modeled using up-to-date data, and the results are then converted into a newly updated group structure. This conversion uses an iterative linear least squares solver to minimize chi-squared. The approaches used in this work also enable energy spectrum generation and uncertainty tracking. The method used in this paper for fast 235U fission DNP group structure updating can be applied to different energies and fissile nuclides. Demonstration of the uncertainty tracking in reactor kinetics and dynamics simulations is shown using point reactor kinetics simulations. Results show that there are data discrepancies between the International Atomic Energy Agency database and data used in ORIGEN, which are currently being fixed. Results also show that the proposed method for group spectra generation performs well.

Seifert, Luke [University of Illinois]↗

Light Baryon Spectroscopy at Jefferson Lab: What have we learned about excited baryons?

Nucleons are complex systems of confined quarks and gluons and exhibit the characteristic spectra of excited states. These states serve as an excellent probe of quantum chromodynamics (QCD), the fundamental theory of strong interaction. Highly-excited states are sensitive to the details of quark confinement, which is only poorly understood within QCD. This is the regime of non-perturbative QCD and it is one of the key issues in hadronic physics to identify the corresponding relevant degrees of freedom and the effective forces between them. In recent years, lattice-QCD has made significant progress toward understanding the spectra of hadrons. On the experimental side, high-energy electrons and photons are a remarkably clean probe of hadronic matter, providing a microscope for examining atomic nuclei and the strong nuclear force. For more than a decade, laboratories worldwide have accumulated data for such investigations, resulting in a number of surprising discoveries and contributing to our understanding of the nucleon, its underlying quark structure, and the dynamics of the strong interaction. Current experimental efforts utilize highly-polarized frozen-spin (butanol) targets and deuterium targets in combination with polarized photon beams. These are important steps toward so-called complete experiments that will allow us to unambiguously determine the scattering amplitudes in the underlying reactions and to identify resonance contributions. In my talk, I will give an overview of the excited baryon program at Jefferson Lab and I will discuss recent results from (double-)polarization experiments.

Crede, Volker↗

Implementation of a generalized coherent elastic scattering formulation for thermal neutron scattering analysis - 14487

The scattering interactions of thermal neutrons in matter are classified into inelastic and elastic components. In crystalline materials, coherent elastic scattering represents a dominant form of interaction. Traditionally, the treatment of this interaction in standard computer codes (e.g., the LEAPR module of the NJOY code system) was performed within the cubic approximation and restricted the analyst to a few materials that were hardwired into the code. In general, these restrictions can hinder the production of ENDF style thermal neutron scattering libraries for new materials outside the current portfolio of treated materials. In this work, a general formulation based on the exact theory of coherent elastic scattering was developed. This formulation is capable of processing the crystalline structure of any material. The cubic approximation is relaxed by accounting for the partial forces from asymmetric crystal structures in the calculation. The atom sites approximation is relaxed by utilizing a site-wise Debye-Waller factor. Specifically, the Debye-Waller factor is no longer regarded as a uniform constant across the crystal but treated as a matrix tensor that uses the integral of the partial phonon density of states. Therefore, the calculation of the coherent elastic scattering cross section is executed by applying the matrix-form of the Debye-Waller factor on each reciprocal space point and summing them up. Furthermore, the developed algorithm supports compounds with any number of elements and of any ratio to each other. This general formulation was successfully implemented and contributed to the production of ENDF style thermal neutron scattering libraries for silicon dioxide (α-SiO{sub 2}) and silicon carbide (3C-SiC). The needed input for the analysis was generated using density functional theory (DFT) atomistic simulations and dynamical matrix calculations for both materials. (authors)

42 ENGINEERING↗

Identification of Integral Benchmarks for Nuclear Data Testing Using DICE (Database for the International Handbook of Evaluated Criticality Safety Benchmark Experiments)

Typical users of the International Criticality Safety Evaluation Project (ICSBEP) Handbook have specific criteria to which they desire to find matching experiments. Depending on the application, those criteria may consist of any combination of physical or chemical characteristics and/or various neutronic parameters. The ICSBEP Handbook contains a structured format helping the user narrow the search for experiments of interest. However, with nearly 4300 different experimental configurations and the ever increasing addition of experimental data, the necessity to perform multiple criteria searches have rendered these features insufficient. As a result, a relational database was created with information extracted from the ICSBEP Handbook. A users’ interface was designed by OECD and DOE to allow the interrogation of this database. The database and the corresponding users’ interface are referred to as DICE. DICE currently offers the capability to perform multiple criteria searches that go beyond simple fuel, physical form and spectra and includes expanded general information, fuel form, moderator/coolant, neutron-absorbing material, cladding, reflector, separator, geometry, benchmark results, spectra, and neutron balance parameters. DICE also includes the capability to display graphical representations of neutron spectra, detailed neutron balance, sensitivity coefficients for capture, fission, elastic scattering, inelastic scattering, nu-bar and mu-bar, as well as several other features.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Large-Scale Welding Process Simulation by GPU Parallelized Computing

The computational design of industrially relevant welded structures is extremely time consuming due to coupled physics and high nonlinearity. Previously, most welding distortion and residual stress simulations have been limited to small coupons and reduced order (from three-dimensional [3D] to two-dimensional [2D]), or inherent strain approximations were used for large structures. In this current study, an explicit finite element code based on a graphics processing unit was utilized to perform 3D transient thermomechanical simulation of structural components during welding. Laser brazing of aluminum alloy panels as representative of automotive manufacturing scenarios was simulated to predict out-of-plane distortion under different clamping conditions. The predicted deformation pattern and magnitude were validated by laser scanning data of physical assemblies. In addition, the code was used to investigate residual stresses developed during multipass arc welding of a nuclear industry pressurizer surge nozzle and subsequent welding repair where a 3D simulation was necessary. Taking the experimental data as reference, the 3D model predicted better residual stress distribution than a typical 2D asymmetrical model. Stress evolution in welding repair was also presented and discussed in this study. Furthermore, the efficient numerical model made it feasible to use integrated computational welding engineering to simulate welding processes for large-scale structures.

97 MATHEMATICS AND COMPUTING↗

A multiscale Bayesian data integration approach for mapping air dose rates around the Fukushima Daiichi Nuclear Power Plant

This paper presents a multiscale data integration method to estimate the spatial distribution of air dose rates in the regional scale around the Fukushima Daiichi Nuclear Power Plant. We integrate various types of datasets, such as ground-based walk and car surveys, and airborne surveys, all of which have different scales, resolutions, spatial coverage, and accuracy. This method is based on geostatistics to represent spatial heterogeneous structures, and also on Bayesian hierarchical models to integrate multiscale, multi-type datasets in a consistent manner. The Bayesian method allows us to quantify the uncertainty in the estimates, and to provide the confidence intervals that are critical for robust decision-making. Although this approach is primarily data-driven, it has great flexibility to include mechanistic models for representing radiation transport or other complex correlations. Here, we demonstrate our approach using three types of datasets collected at the same time over Fukushima City in Japan: (1) coarse-resolution airborne surveys covering the entire area, (2) car surveys along major roads, and (3) walk surveys in multiple neighborhoods. Results show that the method can successfully integrate three types of datasets and create an integrated map (including the confidence intervals) of air dose rates over the domain in high resolution. Moreover, this study provides us with various insights into the characteristics of each dataset, as well as radiocaesium distribution. In particular, the urban areas show high heterogeneity in the contaminant distribution due to human activities as well as large discrepancy among different surveys due to such heterogeneity.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

MatLib-1.2: Nuclear Material Properties Library

The U.S. Nuclear Regulatory Commission (NRC) uses the computer code Fuel Analysis under Steady-state and Transients (FAST) to model steady-state and transient fuel behavior to support regulatory decisions. FAST relies on a material properties library (MatLib) that contains the thermal and mechanical properties of the nuclear materials and coolants of interest to support the US commercial nuclear industry. MatLib contains properties for a variety of nuclear fuels, cladding and other structural materials, gases, and coolants. In this document, material property correlations for the materials contained within MatLib are presented and discussed. When available, comparisons are made between the material property correlations and available data. Additionally, uncertainties are quantified on the material proper- ties, which is then used by the NRC to support uncertainty quantification for best-estimate plus uncertainty safety evaluation reviews. This document describes MatLib-1.2, which was updated from MatLib-1.1 to include cleanup of the code for streamlined calls to MatLib from the main FAST source code, and to enable easier readability of the code by developers that maintain and enhance the FAST code. The results of MatLib did not change between MatLib-1.1 and MatLib-1.2; however, the source code changes warranted incrementing the minor numbering of the software version number. The changes may result in faster execution times of FAST-1.2 as compared to FAST-1.1. This document is one of a series of documents on FAST; the other documents detail the models used by FAST as well as its integral assessment to experiments and commercial data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Real-Time, In-pile Creep Test Rigs for Characterizing the Structural Materials of Nuclear Components

New and improved materials are being considered for supporting both existing and next-generation nuclear reactors. Reactor materials can significantly degrade with time, thus limiting or altering their properties in harsh reactor environments. To accurately understand such material degradation, real-time data obtained under prototypic irradiation conditions are required. In particular, understanding the creep behavior of materials exposed to irradiation and elevated temperatures is essential for safety concern evaluations. To provide these capabilities, Idaho National Laboratory (INL)’s High Temperature Test Laboratory (HTTL) developed several instrumented test rigs for obtaining real-time data from specimens in well-controlled pressurized-water reactor (PWR) coolant conditions at the Materials Test Reactor. This technical report focuses on INL’s efforts to evaluate and enhance the former creep test rig prototype that relied on linear variable differential transformers in laboratory settings. Specifically, the test rig can detect changes in the length of creep specimens, which is useful for measuring thermal expansion and creep deformation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗