Search NASA⌕ Search

SEARCH · Search NASA

Results for “Performance analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Analysis of a Loop for Fission Gas Release and Monitoring at the PULSTAR Reactor

Modern nuclear fuel performance analysis tools aim at establishing a predictive approach for examining macroscopic fuel behavior due to fuel gaseous swelling and the associated pellet cladding mechanical interaction (PCMI). In general, the macroscopic behavior is highly sensitive to understanding microscopically driven phenomena, which in this case is the release of fission gas (i.e., Kr and Xe) from the fuel. Previous studies identified the uncertainties associated with the intra-granular fission gas diffusion coefficient as most limiting for the accuracy of fission gas release calculations. In particular, it was concluded that, in order to improve fission gas release as well as gaseous swelling predictions using fuel performance codes, a better characterization of the diffusion coefficient is needed. This work explores the implementation of an on-line fission gas release and measurement loop at the North Carolina State University (NCSU) PULSTAR reactor. A unique characteristic of this loop is the ability to control the temperature of the fuel samples during irradiation to establish a more accurate correlation between the irradiation conditions and an observable such as the intragranular gas diffusion coefficient. Analysis was performed of an 'in-pile' fission gas release experiment that is currently under implementation at the NCSU PULSTAR reactor. Using MCNP6 calculations and COMSOL simulations the fission rate density and temperature distributions in UO{sub 2} microspheres were estimated. To explore the feasibility of detecting fission gas isotopes, estimates of R/B for {sup 138}Xe were obtained using the equivalent sphere model and combined with MCNP6 predicted B estimates to obtain R. Assuming detection in a typical gamma-ray spectrometry HPGe system, it was conclude that reasonable count rates will be achieved to allow extraction of release information. At this stage, accurate assessment is underway of the performance of various loop components to set the final design criteria in support of loop fabrication. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A performance comparison of current HPC systems: Blue Gene/Q, Cray XE6 and InfiniBand systems

We present here a performance analysis of three of current architectures that have become commonplace in the High Performance Computing world. Blue Gene/Q is the third generation of systems from IBM that use modestly performing cores but at large-scale in order to achieve high performance. The XE6 is the latest in a long line of Cray systems that use a 3-D topology but the first to use its Gemini interconnection network. InfiniBand provides the flexibility of using compute nodes from many vendors that can be connected in many possible topologies. The performance characteristics of each vary vastly, and the way in which nodes are allocated in each type of system can significantly impact on achieved performance. In this work we compare these three systems using a combination of micro-benchmarks and a set of production applications. In addition we also examine the differences in performance variability observed on each system and quantify the lost performance using a combination of both empirical measurements and performance models. Our results show that significant performance can be lost in normal production operation of the Cray XE6 and InfiniBand Clusters in comparison to Blue Gene/Q.

Application analysis↗

NREL's OpenStudio Helps Design More Efficient Buildings (Fact Sheet)

The National Renewable Energy Laboratory (NREL) has created the OpenStudio software platform that makes it easier for architects and engineers to evaluate building energy efficiency measures throughout the design process. OpenStudio makes energy modeling more accessible and affordable, helping professionals to design structures with lower utility bills and less carbon emissions, resulting in a healthier environment. OpenStudio includes a user-friendly application suite that makes the U.S. Department of Energy's EnergyPlus and Radiance simulation engines easier to use for whole building energy and daylighting performance analysis. OpenStudio is freely available and runs on Windows, Mac, and Linux operating systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Cosmological parameter estimation with large scale structure observations

We estimate the sensitivity of future galaxy surveys to cosmological parameters, using the redshift dependent angular power spectra of galaxy number counts, C{sub ℓ}(z{sub 1},z{sub 2}), calculated with all relativistic corrections at first order in perturbation theory. We pay special attention to the redshift dependence of the non-linearity scale and present Fisher matrix forecasts for Euclid-like and DES-like galaxy surveys. We compare the standard P(k) analysis with the new C{sub ℓ}(z{sub 1},z{sub 2}) method. We show that for surveys with photometric redshifts the new analysis performs significantly better than the P(k) analysis. For spectroscopic redshifts, however, the large number of redshift bins which would be needed to fully profit from the redshift information, is severely limited by shot noise. We also identify surveys which can measure the lensing contribution and we study the monopole, C{sub 0}(z{sub 1},z{sub 2})

79 ASTRONOMY AND ASTROPHYSICS↗

Probabilistic Resilience of DER Systems - A Simulation Assisted Optimization Approach

Energy systems resilience is becoming increasingly important as the frequency of major grid outages increases. In this work, we present a methodology to optimize a behind-tlie-meter distributed energy resource system to sustain a site's critical loads during a pre-defined outage period. With the fixed system design, we then propose an outage simulation approach to estimate the resilience potential of the DER system to sustain loads beyond the fixed outage period - a yearlong resilience performance analysis. We apply statistical analysis to assess the system's resilience performance over a broader parametric problem space on an hourly, monthly, and yearly basis. We demonstrate the impact of the pre-defined outage period on the resilience performance through a case study. Results show that the probability of surviving a random outage of a given duration changes from 20% to 95% when the outage is modeled for a weekday instead of a weekend for the given load-profile.

28 EE - Advanced Manufacturing Office (EE-5A)↗

Deeplynx Dag Repository

The DeepLynx DAG repository will contain several Airflow DAGs (Directed Acyclic Graphs) which will be used in the context of DeepLynx's deployed Apache Airflow instance. These DAGs will be used for multiple data management tasks for DeepLynx data, including but not limited to: - bringing data from various sources and tools into DeepLynx - managing sequential data workflows, such as running Python scripts on data to perform analysis and returning the results to DeepLynx - performing any necessary transformation or pre-processing on data coming into DeepLynx from external sources or out of DeepLynx to go to external applications

Brownlee, JarenM.↗

Performance Characterization and Validation of mocfe_bone (Contribution to the CESAR Annual Report FY12)

In the first phase of CESAR, the performance analysis task focused on understanding the baseline performance characteristics of mocfe bone | studying its behavior under different parallelization scenarios and comparing its scaling behavior to the MOCFE solver in the main application, UNIC. The results will help drive the co-design process for this application, which is one of the three target applications in CESAR, and will help identify current and future scaling bottlenecks.

97 MATHEMATICS AND COMPUTING↗

Search For Low-Mass Quark-Antiquark Resonances Produced With an Initial State Photon at 13 TeV Using the CMS Detector

We present a search for low-mass narrow qq̅ resonances. This search uses data from LHC pp collisions at a center of mass of 13 TeV in Run 2, and corresponds to an integrated luminosity of 137 fb^{-1}, currently using 10\% of data. Utilizing full Run 2 data allows the use of a lower photon pT threshold trigger than a previous analysis performed with only 2016 data, allowing this analysis to be more sensitive to resonances in the low mass region. We require an initial state photon recoiling against the narrow resonance, leading to the resonance having a high transverse momentum. The high pT decay products of the resonance collimate and are reconstructed as a single large jet with an internal two-pronged substructure. A two-pronged dijet score based on the ParticleNet tagger is used to select jets with two-pronged substructure. The background is estimated via a data-driven method using a transfer factor between the distributions which fail and pass the two-pronged substructure requirement. The new physics signal is searched for as a narrow peak excess above the Standard Model backgrounds in the jet mass spectrum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comment on "An implementation of neural simulation-based inference for parameter estimation in ATLAS''

The paper titled "An implementation of neural simulation-based inference for parameter estimation in ATLAS" by the ATLAS collaboration (arXiv:2412.01600v1 [hep-ex]) describes the implementation of neural simulation-based inference for a measurement analysis performed by ATLAS. The uncertainties in the analysis arising from the finiteness of the simulated datasets are estimated using a novel double-bootstrapping technique described in that work. In the present comment, it is claimed and demonstrated, using a toy example, that the double-bootstrapping technique does not actually capture the aforementioned uncertainties.

43 PARTICLE ACCELERATORS↗

Performance Characterization of a Natural Gas-Air Rotating Detonation Engine at Elevated Pressure

Performance of a rotating detonation engine was studied to understand the challenges of achieving and quantifying a net pressure gain at engine-relevant conditions. The combustor under study was designed for operation with natural gas and air at elevated chamber pressures and air preheat temperatures representative of land based power generation gas turbine engines. The thrust produced by the combustor was measured to characterize its performance while high-frequency pressure transducers and high speed imaging of broadband combustion chemiluminescence provided information about the wave structure and dynamics. The rotating detonation engine was tested with two injector configurations to explore the effect of injector design and combustor operating mode on device performance. Analysis using multiple metrics showed nearly identical performance between similar operating conditions that alternately produced a single detonation wave or two counter-propagating waves in the combustion chamber. Across the range of tested conditions, a maximum pressure gain of -42% was measured. Several tests were observed to produce up to 10% more thrust than an ideal, constant pressure combustor, though this comparison ignores injection losses. Comparison of measured pressure gain with idealized simulations showed that the net pressure gain of a rotating detonation engine is closely tied to the area ratio between the inlet and outlet of the combustor.

20 FOSSIL-FUELED POWER PLANTS↗

Fractional watt Vuillemier cryogenic refrigerator program engineering notebook. Volume 2: Stress analysis

A structural analysis performed on the 1/4-watt cryogenic refrigerator. The analysis covered the complete assembly except for the cooling jacket and mounting brackets. Maximum stresses, margin of safety, and natural frequencies were calculated for structurally loaded refrigerator components shown in assembly drawings. The stress analysis indicates that the design is satisfactory for the specified vibration environment, and the proof, burst, and normal operating loads.

Miller, W. S.↗

PKI solar thermal plant evaluation at Capitol Concrete Products, Topeka, Kansas

A system feasibility test to determine the technical and operational feasibility of using a solar collector to provide industrial process heat is discussed. The test is of a solar collector system in an industrial test bed plant at Capitol Concrete Products in Topeka, Kansas, with an experiment control at Sandia National Laboratories, Albuquerque. Plant evaluation will occur during a year-long period of industrial utilization. It will include performance testing, operability testing, and system failure analysis. Performance data will be recorded by a data acquisition system. User, community, and environmental inputs will be recorded in logs, journals, and files. Plant installation, start-up, and evaluation, are anticipated for late November, 1981.

Hauger, J. S.↗

Development of an arcjet nuclear electric propulsion system for a 1993 flight demonstration

The design and performance of an arcjet NEP spacecraft, suitable for use in the Space Nuclear Power System (SNPS) Reference Mission, are outlined. Several arcjet technology levels were considered in this study, and the vehicle design was based on an 30 kW ammonia arcjet system operating at an Isp of 1000 s and an efficiency of 45 percent. The arcjet/gimbal system, PPU and propellant feed-system are described. A 100 kWe SNPS was assumed and the spacecraft mass was baselined at 5500 kg excluding the propellant feed system. A radiation/arcjet efflux diagnostics package was included in the performance analysis. This spacecraft, launched from Kennedy, can perform a 50 degree inclination change and reach a final orbit of GEO with a 180 day trip time providing a six month active load for the SNPS. Advanced ammonia and hydrogen systems were examined for precursor SDI platform applications.

Deininger, W. D.↗

Program Models A Laser Beam Focused In An Aerosol Spray

Monte Carlo analysis performed on packets of light. Program for Analysis of Laser Beam Focused Within Aerosol Spray (FLSPRY) developed for theoretical analysis of propagation of laser pulse optically focused within aerosol spray. Applied for example, to analyze laser ignition arrangement in which focused laser pulse used to ignite liquid aerosol fuel spray. Scattering and absorption of laser light by individual aerosol droplets evaluated by use of electromagnetic Lorenz-Mie theory. Written in FORTRAN 77 for both UNIX-based computers and DEC VAX-series computers. VAX version of program (LEW-16051). UNIX version (LEW-16065).

Barton, J. P.↗

Enhanced Contact Graph Routing (ECGR) MACHETE Simulation Model

Contact Graph Routing (CGR) for Delay/Disruption Tolerant Networking (DTN) space-based networks makes use of the predictable nature of node contacts to make real-time routing decisions given unpredictable traffic patterns. The contact graph will have been disseminated to all nodes before the start of route computation. CGR was designed for space-based networking environments where future contact plans are known or are independently computable (e.g., using known orbital dynamics). For each data item (known as a bundle in DTN), a node independently performs route selection by examining possible paths to the destination. Route computation could conceivably run thousands of times a second, so computational load is important. This work refers to the simulation software model of Enhanced Contact Graph Routing (ECGR) for DTN Bundle Protocol in JPL's MACHETE simulation tool. The simulation model was used for performance analysis of CGR and led to several performance enhancements. The simulation model was used to demonstrate the improvements of ECGR over CGR as well as other routing methods in space network scenarios. ECGR moved to using earliest arrival time because it is a global monotonically increasing metric that guarantees the safety properties needed for the solution's correctness since route re-computation occurs at each node to accommodate unpredicted changes (e.g., traffic pattern, link quality). Furthermore, using earliest arrival time enabled the use of the standard Dijkstra algorithm for path selection. The Dijkstra algorithm for path selection has a well-known inexpensive computational cost. These enhancements have been integrated into the open source CGR implementation. The ECGR model is also useful for route metric experimentation and comparisons with other DTN routing protocols particularly when combined with MACHETE's space networking models and Delay Tolerant Link State Routing (DTLSR) model.

Segui, John S.↗

The Segmented Aperture Interferometric Nulling Testbed (SAINT) III: Control Systems Analysis and Preliminary Results

This work presents a detailed current performance analysis for the telescope, pointing, and coronagraph com- ponent subsystems of the Segmented Aperture Interferometric Nulling Testbed (SAINT). The project pairs an active segmented mirror with the Visible Nulling Coronagraph (VNC) towards demonstrating capabilities for the future space observatories needed to directly detect and characterize Earth-sized worlds around nearby stars. We describe approaches to optimize subsystem wavefront sensing and control parameters, summarizing relevant scal- ing relations between these parameters, residual errors, and observed contrast measurements. Preliminary results from diagnostic testing under various control states are presented along with intermediate contrast measurements towards demonstrating the full system.

Hicks, Brian A.↗