Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

A "roller-wheel" Pt-containing small molecule that outperforms its polymer analogs in organic solar cells

A novel Pt-bisacetylide small molecule (Pt-SM) featuring “roller-wheel” geometry was synthesized and characterized. When compared with conventional Pt-containing polymers and small molecules having “dumbbell” shaped structures, Pt-SM displays enhanced crystallinity and intermolecular π–π interactions, as well as favorable panchromatic absorption behaviors. Furthermore, organic solar cells (OSCs) employing Pt-SM achieve power conversion efficiencies (PCEs) up to 5.9%, the highest reported so far for Pt-containing polymers and small molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics and charge transport in organic semiconductors: a classical approach to modeling electron transfer

Organic photovoltaics (OPVs) are a promising carbon-neutral energy conversion technology, with recent improvements pushing power conversion efficiencies over 10%. A major factor limiting OPV performance is inefficiency of charge transport in organic semiconducting materials (OSCs). Due to strong coupling with lattice degrees of freedom, the charges form polarons, localized quasi-particles comprised of charges dressed with phonons. These polarons can be conceptualized as pseudo-atoms with a greater effective mass than a bare charge. Here we propose that due to this increased mass, polarons can be modeled with Langevin molecular dynamics (LMD), a classical approach with a computational cost much lower than most quantum mechanical methods. Here we present LMD simulations of charge transfer between a pair of fullerene molecules, which commonly serve as electron acceptors in OSCs. We find transfer rates consistent with experimental measurements of charge mobility, suggesting that this method may provide quantitative predictions of efficiency when used to simulate materials on the device scale. Our approach also offers information that is not captured in the overall transfer rate or mobility: in the simulation data, we observe exactly when and why intermolecular transfer events occur. In addition, we demonstrate that these simulations can shed light on the properties of polarons in OSCs. In conclusion, much remains to be learned about these quasi-particles, and there are no widely accepted methods for calculating properties such as effective mass and friction. Lastly, our model offers a promising approach to exploring mass and friction as well as providing insight into the details of polaron transport in OSCs.

14 SOLAR ENERGY↗

Large dielectric constant, high acceptor density, and deep electron traps in perovskite solar cell material CsGeI 3

Here we report that many metal halides that contain cations with the ns 2 electronic configuration have recently been discovered as high-performance optoelectronic materials. In particular, solar cells based on lead halide perovskites have shown great promise as evidenced by the rapid increase of the power conversion efficiency. In this paper, we show density functional theory calculations of electronic structure and dielectric and defect properties of CsGeI 3 (a lead-free halide perovskite material). The potential of CsGeI 3 as a solar cell material is assessed based on its intrinsic properties. We find anomalously large Born effective charges and a large static dielectric constant dominated by lattice polarization, which should reduce carrier scattering, trapping, and recombination by screening charged defects and impurities. Defect calculations show that CsGeI 3 is a p-type semiconductor and its hole density can be modified by varying the chemical potentials of the constituent elements. Despite the reduction of long-range Coulomb attraction by strong screening, the iodine vacancy in CsGeI3 is found to be a deep electron trap due to the short-range potential, i.e., strong Ge–Ge covalent bonding, which should limit electron transport efficiency in p-type CsGeI 3 . This is in contrast to the shallow iodine vacancies found in several Pb and Sn halide perovskites (e.g., CH 3 NH 3 PbI 3 , CH 3 NH 3 SnI 3 , and CsSnI 3 ). The low-hole-density CsGeI 3 may be a useful solar absorber material but the presence of the low-energy deep iodine vacancy may significantly reduce the open circuit voltage of the solar cell. Still, on the other hand, CsGeI 3 may be used as an efficient hole transport material in solar cells due to its small hole effective mass, the absence of low-energy deep hole traps, and the favorable band offset with solar absorber materials such as dye molecules and CH 3 NH 3 PbI 3 .

36 MATERIALS SCIENCE↗

The integrated adjustment of chlorine substitution and two-dimensional side chain of low band gap polymers in organic solar cells

A series of conjugated T2 polymers (PBBF1-T2 and PBBCl1-T2), and T3 polymers (PBBF1-T3, PBBCl1-T3 and PBBCl2-T3) were synthesized using chlorinated/fluorinated benzothiadiazole (BT) and the two-dimensional benzo[1,2-b:4,5-b']dithiophene (BDT) units as the building blocks. When compared to the fluorinated polymer, the performance of the polymer photovoltaic devices showed that these chlorinated polymers gave extended optical absorption spectrum, and lower highest occupied molecular orbital (HOMO) energy levels. The introduction of chlorine atoms increases the twist angle between the polymer backbones, and led to a lower HOMO energy level and resulted in the increase of open circuit voltage (V oc) up to 0.84 V in PBBCl2-T3 based devices with a two chlorine substitution. However, the device based on PBBCl1-T3 with only one chlorine atom exhibited the best power conversion efficiency (PCE) which was as high as 6.87% with a V oc of 0.73 V, and this was about 10% higher than that of its fluorinated analogs. Here, this result indicated that the introduction of chlorine atoms into polymers is not only a simple route to synthesize a large amount of material and which avoids the tedious synthesis steps in widely used fluorinated polymers, but it is also a feasible and effective strategy to fine tune the energy level of polymer solar cell with optimized PCE. Furthermore, it is worth noting that the introduction of longer π-conjugation side chains could minimize the influence of chlorine substitution by reducing the twist angle between the polymer backbones, which would reduce the gap of V oc between the chlorinated polymers and their fluorinated analogs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New donor polymer with tetrafluorinated blocks for enhanced performance in perylenediimide-based solar cells

The synthesis of a new tetrafluorinated semiconducting donor polymer, poly[(4,8-bis(5-(2-ethylhexyl)-4-fluorothiophene-2-yl)-benzo[1,2-b:4,5-b']dithiophene)-alt-(5,6-difluoro-4,7-(4-(2-ethylhexyl)-dithien-2-yl-2,1,3-benzothiadiazole)] (PBTZF4), and its photovoltaic performance in bulk heterojunction (BHJ) blends with the non-fullerene molecular acceptor [1,2:3,4]-bis-[N,N'-bis-1-pentylhexyl-perylenediimide-1,12-yl]-benzene (bPDI2P), are reported. PBTZF4:bPDI2P solar cells exhibit a high open circuit voltage (V oc ) of 1.118 V, a short circuit current density (J sc ) of 10.02 mA cm –2 , and a fill factor (FF) of 49.5%, affording a power conversion efficiency (PCE) of 5.55%. Interestingly, a lower PCE of 3.68% is obtained with the difluorinated analogue, poly[(4,8-bis(5-(2-ethylhexyl)-thiophene-2-yl)-benzo[1,2-b:4,5-b']dithiophene)- alt -(5,6-difluoro-4,7-(4-(2-ethyl-hexyl)-dithien-2-yl-2,1,3-benzothiadiazole)] (PBTZF2). Both PBTZF4:bPDI2P and PBTZF2:bPDI2P cells benefit from complementary (donor/acceptor) light absorption and very low geminate recombination, with bimolecular recombination being the dominant loss mechanism, as established by femtosecond transient absorption spectroscopy. DFT computation and physicochemical characterization data argue that the “additional” tetrafluorination planarizes the PBTZF4 backbone and enhances aggregation versus PBTZF2, affording superior charge carrier transport as assayed by field-effect mobility. In addition, fluorine-originated HOMO stabilization, –5.41 eV for PBTZF4 versus –5.33 eV for PBTZF2, and a superior blend microstructure afford a higher PBTZF4:bPDI2P solar cell PCE versus PBTZF2:bPDI2P.

36 MATERIALS SCIENCE↗

Potassium-chemical synthesis of 3D graphene from CO 2 and its excellent performance in HTM-free perovskite solar cells

The conversion of greenhouse gas CO 2 into novel materials is the most promising approach to solve greenhouse gas issues. In this paper, we report for the first time the reaction of potassium with CO 2 to synthesize three-dimensional honeycomb-like structured graphene (3DHG). Furthermore, 3DHG exhibited excellent performance as a counter electrode for hole transport material (HTM)-free perovskite solar cells, leading to a power conversion efficiency of 10.06%. Finally, this work constitutes a new aspect of potassium chemistry for material synthesis from a greenhouse gas and the generation of electrical energy from sunlight.

14 SOLAR ENERGY↗

Dual-source evaporation of silver bismuth iodide films for planar junction solar cells

Non-toxic and air-stable silver bismuth iodide semiconductors are promising light absorber candidates for photovoltaic applications owing to a suitable band gap for multi- or single-junction solar cells. Recently, solution-based film fabrication approaches for several silver bismuth iodide stoichiometries have been investigated. The current work reports on a facile and reproducible two-step coevaporation/annealing approach to deposit compact and pinhole-free films of AgBi 2 I 7 , AgBiI 4 and Ag 2 BiI 5 . X-ray diffraction (XRD) in combination with scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX) analysis reveals formation of pure cubic (Fd$\bar{3}$m) with combining macron]m) phase AgBi 2 I 7 , cubic (Fd$\bar{3}$m) or rhombohedra (R$\bar{3}$m with combining macron]m) phase AgBiI 4 , each with >3 μm average grain size, or the rhombohedral phase (R$\bar{3}$m) Ag 2 BiI 5 with >200 nm average grain size. A phase transition from rhombohedral to cubic structure is investigated via temperature-dependent X-ray diffraction (TD-XRD). Planar-junction photovoltaic (PV) devices are prepared based on the coevaporated rhombohedral AgBiI 4 films, with titanium dioxide (TiO 2 ) and poly(3-hexylthiophene) (P3HT) as electron- and hole-transport layers, respectively. Finally, the best-performing device exhibited a power conversion efficiency (PCE) of as high as 0.9% with open-circuit voltage (VOC) > 0.8 V in the reverse scan direction (with significant hysteresis).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring Fluorescence Emissions, Quantum Yields, and White Light Emitting from Nitrogen-doped Graphene and Carbon Nitride Quantum Dots

Highly fluorescent N-doped graphene quantum dots (NGQDs) and graphitic carbon nitride quantum dots (CNQDs, g-C 3 N 4 ) were synthesized using a solid-phase microwave-assisted (SPMA) technique. The SPMA method, based on the pyrolysis of citric acid and urea with different recipes, is capable of producing quantum dots with coexisting NGQDs and CNQDs at 280°C within only five minutes. The photoluminescence (PL) emissions from NGQD and CNQDs are strongly dependent on excitation wavelength and the solvent type, i.e., water, ethanol, and N-methyl pyrrolidinone. The unique design of the quantum dots possesses a multiple chromophoric band-gap structure, originated from the presence of g-C 3 N 4 , defect-related emissive traps, and grain boundaries. Thus, an appropriate excitation wavelength induces a conjugated π electron system to fulfill the most probable absorption band, resulting in wavelength-dependent emissions including ultraviolet, visible and infrared light. Here, the quantum yield of the NGQD and CNQD samples can attain as high as 68.1%. Accordingly, one light-emitting device using the combination of the NGQD and CNQD powders embedded polymeric film can emit white-like light with high power conversion efficiency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

β-Functionalized push–pull opp-dibenzoporphyrins as sensitizers for dye-sensitized solar cells: the role of the phenylethynyl bridge

A novel class of β-functionalized push–pull zinc opp-dibenzoporphyrins was designed and synthesized as sensitizers for dye-sensitized solar cells. Dibenzoporphyrin YH7 displayed strong push–pull characteristics, which included clearly segregated HOMO/LUMO and fast charge injection from the singlet excited state of zinc porphyrin to the conduction band of TiO 2 . The incorporation of both the phenylethynyl bridge and amino group was critical to achieve the enhanced push–pull effect. The highest PCE value in this series obtained with the YH6 cell was 6.7%, which is comparable to that of the best ruthenium dye, N719 (η = 7.4%), under similar conditions. The high PCE of the YH6 cell is ascribed to its high light harvesting ability and favorable cell kinetics, which is supported by electrochemical impedance spectroscopy studies and femtosecond transient absorption studies. An unusual illumination-induced photodegradation was observed for YH7, which was attributed as the major reason for the unexpected lower PCE of the YH7 cell (η = 5.7%). Furthermore, this work demonstrates the applicability of π-extended porphyrins as a new generation of sensitizers for high performance dye-sensitized solar cells.

Hu, Yi↗

A zinc( II ) complex of di(naphthylethynyl)azadipyrromethene with low synthetic complexity leads to OPV with high industrial accessibility

Organic photovoltaics have reached high power conversion efficiencies (PCE) using non-fullerene acceptors (NFAs). However, the best NFAs tend to have complex syntheses, limiting scalability. Among polymer donors, regioregular poly(3-hexylthiophene) (P3HT) has the greatest potential for commercialization due to its simple synthesis and good stability, but PCEs have been limited. It is thus imperative to find scalable NFAs that give high PCE with P3HT. Herein we report a zinc( II ) complex of di(naphthylethynyl)azadipyrromethene (Zn(L2) 2 ) as a non-planar NFA that can be synthesized on the gram scale using inexpensive starting materials without chromatography column purification. The NFA has strong absorption in the 600–800 nm region. Time-dependent density-functional theory calculations suggest that the low-energy absorptions can be understood within a four-orbital model involving transitions between π-orbitals on the azadipyrromethene core. OPVs fabricated from P3HT:Zn(L2) 2 blends reached a PCE of 5.5%, and the PCE was not very sensitive to the P3HT:Zn(L2) 2 weight ratio. Due to its shape, Zn(L2) 2 shows isotropic charge transport and its potential as an electron donor is also demonstrated. The combination of simple synthesis, good PCE and photostability, and tolerance to the active material weight ratio demonstrates the potential of Zn(L2) 2 as an active layer material in OPVs.

36 MATERIALS SCIENCE↗

A naphthalene diimide side-chain polymer as an electron-extraction layer for stable perovskite solar cells

Poly(N-(5-(5-norbornene-2-carbonyl)oxy)pentyl)-N'-n-hexyl-naphthalene-1,8:4,5-bis(dicarboximide) has been synthesized by esterification of (N-(5-hydroxypentyl)-N'-n-hexyl-naphthalene-1,8:4,5-bis(dicarboximide)) with exo-5-norbornene-2-carboxylic acid, and has been polymerized using the first-generation Grubbs initiator. This side-chain polymer exhibits good transparency throughout the visible (absorption onset at ca. 400 nm), good solubility in common low- and medium-polarity organic solvents, good resistance to dimethylformamide, and appropriate electron affinity for use as an electron-extraction layer in lead-halide perovskite solar cells. The performance of this polymer in n-i-p perovskite solar cells was compared to that of several small-molecule naphthalene-1,8:4,5-bis(dicarboximide) derivatives and of SnO 2 . Solar cells using the polymer exhibited open-circuit voltages of up to 1.02 V, short-circuit currents of over 21 mA cm –2 , and power conversion efficiencies (PCE) reaching 14% which stabilize at 13.8% upon 90 s of illumination. Meanwhile control SnO 2 devices exhibited a PCE of ca. 16%, and small-molecule devices gave PCE values of less than 10%. Here, the devices employing the polymer exhibited improved long-term stability relative to the SnO 2 control devices under continuous illumination.

36 MATERIALS SCIENCE↗

Voltage bias stress effects in metal halide perovskites are strongly dependent on morphology and ion migration pathways

The solar-to-power power conversion efficiencies (PCEs) of metal halide perovskites (MHP) have improved over the last decade using a wide variety of methods, including composition manipulation, dopant introduction, and interfacial buffers. These methods, however, have taken little regard for the electronic and interfacial effects such alterations may cause within devices under voltage bias stress – a condition required for most device operation. We investigate how halide and cation substitution in MHP structures [specifically, CH 3 NH 3 PbI 2.87 Cl 0.13 and Cs 0.1 (MA 0.17 FA 0.83 ) 0.9 Pb(I 0.83 Br 0.17 ) 3 ] effects the current behavior of devices while under a range of voltage bias stress in both light and dark conditions. Additionally, conducting in depth investigations into the electronic and morphological differences between these two MHP devices, we confirmed their unique voltage bias stress effects are due to intrinsic behavior within the perovskite structure. Importantly, we also determined how crystallite orientation can influence ion migration and therefore alter charge transport and current stability in MHP photovoltaic devices.

36 MATERIALS SCIENCE↗

Solar cell contacts: quantifying the impact of interfacial layers on selectivity, recombination, charge transfer, and V oc

Interfacial layers (IFLs) are ubiquitous in solar cells, but their precise impact on carrier transfer rates and the relation of these rates to performance metrics and the concepts of selectivity and recombination is lacking. We report the use of a well-defined interdigitated back-contact (IBC) silicon solar cell to determine the precise role of such IFLs. We characterize the action of the common IFL spiro-OMeTAD by making it a third contact to the IBC cell. This architecture creates three solar cells within a single structure that, with numerical simulation, provide the exchange current densities (i.e., charge transfer rates) for electrons ( J 0n ) and holes ( J 0p ) and the quasi Fermi-level splitting in the absorber, which measures the balance of generation and recombination. Further, we describe the relation of V oc to contact recombination, the asymmetry in electron/hole collection rates at a single contact (contact selectivity), and the asymmetry in collection rates of the same carrier at separate contacts (carrier selectivity). Relative to bare gold, neat spiro-OMeTAD reduces J 0n and J 0p (their geometric mean ( J 0n J 0p ) 0.5 decreases by 10 4 ), decreasing contact recombination. Addition of the common dopant Li-TFSI and air increase J 0p / J 0n by 10 6 with little effect on ( J 0n J 0p ) 0.5 , increasing contact hole selectivity. The significant increase in V oc observed by introducing spiro-OMeTAD/Li-TFSI IFLs into the cells studied, however, is due to an increase in the carrier selectivity rather than the contact selectivity or recombination of the spiro-OMeTAD-modified contact. Operando measurements further show voltage-dependent changes in the J 0 s, demonstrating that spiro-OMeTAD contributes to hysteresis. Broader context : Solar cells operate by photogenerating excess charge carriers in an absorber material and, in competition with recombination, asymmetrically extracting them at so-called carrier-selective contacts, one that ideally collects only electrons and the other, only holes. Particularly in emerging photovoltaics such as perovskites, thin layers of organic semiconductors or related materials are introduced between the absorber and contact to improve power conversion efficiency. In terms of interfacial charge transfer, a prevailing view is that such interfacial layers improve performance by helping block the collection of the undesired carrier, considered a form of recombination. We use a novel platform to study the simultaneous impact of spiro-OMeTAD, a common interfacial layer, on the collection of electrons, the collection of holes, and on the recombination of electrons and holes. We quantitatively demonstrate that spiro-OMeTAD layers indeed passivate the contact toward recombination, but that larger improvements in the open-circuit voltage, a key cell metric, can come not only from this but also from increasing the asymmetry of the collection of electrons in the system. Further, operando measurements show transient changes in the properties of spiro-OMeTAD which suggest that it contributes to hysteresis phenomena commonly observed in perovskite and other solar cells.

36 MATERIALS SCIENCE↗

Assessing the true power of bifacial perovskite solar cells under concurrent bifacial illumination

An accurate assessment of bifacial solar cells under concurrent bifacial illumination is critical to evaluate their real photovoltaic performance. Here, we demonstrate bifacial perovskite solar cells with bifacial equivalent power conversion efficiencies of 21% and 26% under concurrent bifacial illumination with an albedo of 0.2 and 0.5, respectively. A detailed balance efficiency limit analysis further reveals the full potential of bifacial perovskite solar cells.

14 SOLAR ENERGY↗