Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUSPECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Periodic features in Saturn's F ring - Evidence for nearby moonlets

The Saturn F ring's shepherd satellites, Pandora and Prometheus, have been suspected of causing the periodicities observed in the ring. To test this idea, a selection of the best available Voyager images of the ring were examined by applying an FFT technique to azimuthal profiles from spacecraft ring images. Only a few distinct periodic signals, including one due to the inner shepherd, are visible. It is suggested that these periodic signatures provide evidence for so-far-undiscovered satellites next to this puzzling ring.

Kolvoord, Robert A.↗

Infrared emission from X-ray binaries - IRAS observations

Theoretical calculations show that detectable amounts of FIR radiation can be produced by accretion disks around compact sources. Here, the HEAO A-1 Catalog (Wood et al., 1984) and Bradt and McClintock (1983) are used to select a likely set of candidate sources, and the IRAS Point Source Catalog and IRAS Serendipitous Survey Catalog are used to search for characteristic IR emission from sources in fields around them. Eighty-one candidates with 242 IRAS field sources were examined and color corrected. Eight of these have IR flux measurements which are consistent with emisison from an accretion disk S/N, although other mechanisms for their IR emission cannot yet be ruled out. Most have poor positional corespondences and must be considered suspect as identifications.

Smith, Howard A.↗

Ginga observations of the dwarf novae BV Pup and V426 Oph

Ginga X-ray observations of the high excitation dwarf nova BV Pup and the suspected DQ Her dwarf nova V426 Oph are presented. The observation of BV Pup took place during optical quiescence and showed no detectable X-ray flux, implying the X-ray luminosity was below that observed by Exosat during the decline from an outburst. An optical spectrum obtained near the time of the X-ray observations showed no high-excitation He II 4686, so that it is not clear if this was an unusual low-excitation time for BV Pup or if this is a normal phase of the outburst cycle. V426 Oph was observed for four days near maximum outburst brightness with overlapping X-ray coverage on three days. The 2-10 keV flux was a factor of 2 below that observed by Exosat during a quiescent state. There is evidence for a 28 min timescale in the X-ray, and optical data which are not strictly periodic in nature.

Szkody, Paula↗

The extension of the Cassini spacecraft/Titan probe to the exploration of Neptune/Triton

NASA and ESA are planning a mission named 'Cassini' to place a spacecraft in Saturn orbit and deposit an atmospheric probe into the atmosphere of Titan. It is expected that the upcoming close flyby of Neptune and Triton by Voyager 2 will increase future scientific interest in more intensive exploration of that system. The purpose of this paper is to examine the feasibility of the extension of the Cassini spacecraft and Titan Probe designs to this expected future scientific need for longer-term orbital observations of Neptune and its satellites and for in situ exploration of the suspected Triton atmosphere with a probe vehicle.

Wercinski, Paul F.↗

Cloud optical parameters as derived from the multispectral cloud radiometer

Here, researchers analyze the data taken in the marine stratocumulus intensive field observation component of the First ISCCP Regional Experiment (FIRE), conducted off the California coast in July, 1987 using the Multispectral Cloud Radiometer (MCR). Researchers installed an efficient retrieval scheme for deriving the cloud optical thickness and droplet mode radius, and have described the behavior of the retrieval error. Generally the scheme can retrieve the optical thickness and mode radius adequately unless they are too small; the use of the forward scattering region is more sound than the use of the backscattering portion. Applying the method to real data, researchers derived the two-dimensional distribution of optical thickness and mode radius for a portion of one of the FIRE marine stratocumulus missions. In this case study, the droplet size showed a more uniform distribution than optical thickness with some correlation between large droplet size and small optical thickness. Although researchers can find microphysical reasons for these tendencies, they suspect that the remotely sensed droplet size may be overestimated. As a future problem, they will compare results with in situ data of the droplet size distribution. Also it will be very important to check several reasons why the droplet radius might be overestimated, e.g., soot contamination, effect of escaping photons from the lateral sides of broken clouds, and so on.

Nakajima, Eruyuki↗

Evidence against a simple two-component model for the far-infrared emission from galaxies

Two of the first Infrared Astronomy Satellite (IRAS) results were that galaxies have a wide range of values for the ratio of 60 micron to 100 micron flux density (0.2 less than or equal to S sub 60/S sub 100 less than or equal to 1.0) and that this ratio is correlated with L sub fir, L sub b, L sub fir being the total far-infrared luminosity and L sub b being the luminosity at visible wavelengths (de Jong et al. 1984; Soifer et al. 1984). From these results arose the following simple model for the far-infrared emission from galaxies (de Jong et al. 1984), which has remained the standard model ever since. In this model, the far-infrared emission comes from two dust components: warm dust (T approx. equals 50 K) intermingled with, and heated by, young massive OB stars in molecular clouds and HII regions, and colder dust (T approx. equals 20 K) associated with the diffuse atomic hydrogen in the interstellar medium and heated by the general interstellar radiation field. As the number of young stars in a galaxy increases, S sub 60/S sub 100 increases, because there is a greater proportion of warm dust, and so does L sub fir/L sub b, because most of the radiation from the young stars is absorbed by the dust, leading to a swifter increase in far-infrared emission than in visible light. Although this model explains the basic IRAS results, it is inelegant. It uses two free parameters to fit two data (the 60 and 100 micron flux densities)-and there are now several observations that contradict it. Despite these major problems with the two-component model, it is not clear what should be put in its place. When considering possible models for the far-infrared emission from galaxies, the observational evidence for our own galaxy must be considered. Researchers suspect that the study by Boulanger and Perault (1988) of the far-infrared properties of the local interstellar medium may be particularly relevant. They showed that molecular clouds are leaky - that most of the light from OB stars in molecular clouds does not heat the dust in the clouds, but instead leaks out. The consequence of this is that that while most of the far-infrared emission from the solar neighborhood is from dust associated with diffuse HI, this dust is mostly heated by young stars.

Eales, Stephen A.↗

GPS measurements of strain accumulation across the Imperial Valley, California: 1986-1989

The Global Positioning System (GPS) data collected in southern California from 1986 to 1989 indicate considerable strain accumulation across the Imperial Valley. Displacements are computed at 29 stations in and near the valley from 1986 to 1988, and at 11 sites from 1988 to 1989. The earlier measurements indicate 5.9 +/- 1.0 cm/yr right-lateral differential velocity across the valley, although the data are heavily influenced by the 1987 Superstition Hills earthquake sequence. Some measurements, especially the east-trending displacements, are suspects for large errors. The 1988 to 1989 GPS displacements are best modeled by 5.2 +/- 0.9 cm/yr of valley crossing deformation, but rates calculated from conventional geodetic measurements (3.4 to 4.3 cm/yr) fit the data nearly as well. There is evidence from GPS and Very Long Base Interferometry (VLBI) observations that the present slip rate along the southern San Andreas fault is smaller than the long-term geologic estimate, suggesting a lower earthquake potential than is currently assumed. Correspondingly, a higher earthquake potential is indicated for the San Jacinto fault. The Imperial Valley GPS sites form part of a 183 station network in southern California and northern Baja California, which spans a cross-section of the North American-Pacific plate boundary.

Larsen, Shawn↗

Autonomous power expert system advanced development

The autonomous power expert (APEX) system is being developed at Lewis Research Center to function as a fault diagnosis advisor for a space power distribution test bed. APEX is a rule-based system capable of detecting faults and isolating the probable causes. APEX also has a justification facility to provide natural language explanations about conclusions reached during fault isolation. To help maintain the health of the power distribution system, additional capabilities were added to APEX. These capabilities allow detection and isolation of incipient faults and enable the expert system to recommend actions/procedure to correct the suspected fault conditions. New capabilities for incipient fault detection consist of storage and analysis of historical data and new user interface displays. After the cause of a fault is determined, appropriate recommended actions are selected by rule-based inferencing which provides corrective/extended test procedures. Color graphics displays and improved mouse-selectable menus were also added to provide a friendlier user interface. A discussion of APEX in general and a more detailed description of the incipient detection, recommended actions, and user interface developments during the last year are presented.

Quinn, Todd M.↗

Obliquity histories of Earth and Mars: Influence of inertial and dissipative core-mantle coupling

For both the Earth and Mars, secular variations in the angular separation of the spin axis from the orbit normal are suspected of driving major climatic changes. There is considerable interest in determining the amplitude and timing of these obliquity variations. If the orientation of the orbital plane were inertially fixed, and the planet were to act as a rigid body in it response to precessional torques, the spin axis would simply precess around the orbit at a fixed obliquity and at a uniform angular rate. The precession rate parameter depends on the principal moments of inertia and rotation rate of the perturbed body, and on the gravitational masses and semiminor axes of the perturbing bodies. For Mars, the precession rate is not well known, but probably lies in the interval 8 to 10 arcsec/year. Gravitational interactions between the planets lead to secular motions of the orbit planes. In the rigid body case, the spin axis still attempts to precess about the instantaneous orbit normal, but now the obliquity varies. The hydrostatic figure of a planet represents a compromise between gravitation, which attempts to attain spherical symmetry, and rotation, which prefers cylindrical symmetry. Due to their higher mean densities the cores of the Earth and Mars will be more nearly spherical than the outer layers of these planets. On short time scales it is appropriate to consider the core to be an inviscid fluid constrained to move with the ellipsoidal region bounded by the rigid mantle. The inertial coupling provided by this mechanism is effective whenever the ellipticicy of the container exceeds the ratio of precessional to rotational rates. If the mantle were actually rigid, this would be an extremely effective type of coupling. However, on sufficiently long time scales, the mantle will deform viscously and can accommodate the motions of the core fluid. A fundamentally different type of coupling is provided by electromagnetic or viscous torques. This type of coupling is likely to be most important on longer time scales. In each case, the mantle exerts an equal and opposite torque on the core.

Bills, Bruce G.↗

The Role of Calcium in Osteoporosis

Calcium requirements may vary throughout the lifespan. During the growth years and up to age 25 to 30, it is important to maximize dietary intake of calcium to maintain positive calcium balance and achieve peak bone mass, thereby possibly decreasing the risk of fracture when bone is subsequently lost. Calcium intake need not be greater than 800 mg/day during the relatively short period of time between the end of bone building and the onset of bone loss (30 to 40 years). Starting at age 40 to 50, both men and women lose bone slowly, but women lose bone more rapidly around the menopause and for about 10 years after. Intestinal calcium absorption and the ability to adapt to low calcium diets are impaired in many postmenopausal women and elderly persons owing to a suspected functional or absolute decrease in the ability of the kidney to produce 1,25(OH)2D2. The bones then become more and more a source of calcium to maintain critical extracellular fluid calcium levels. Excessive dietary intake of protein and fiber may induce significant negative calcium balance and thus increase dietary calcium requirements. Generally, the strongest risk factors for osteoporosis are uncontrollable (e.g., sex, age, and race) or less controllable (e.g., disease and medications). However, several factors such as diet, physical activity, cigarette smoking, and alcohol use are lifestyle related and can be modified to help reduce the risk of osteoporosis.

Arnaud, C. D.↗

Discovery and characterization of lunar materials: An incomplete process

Our knowledge of lunar materials is based on (1) sample collections (by the Apollo and Lunar missions, supplemented by Antarctic lunar meteorites); and (2) remote sensing (Earth-based or by spacecraft). The characterization of lunar materials is limited by the small number of sampled sites and the incomplete remote-sensing database (geochemical data collected from orbit cover 20 percent of the lunar surface). There is much about lunar surface materials that remains to be discovered. Listed are some features suspected form present knowledge: (1) Polar Materials; (2) Farside Materials; (3) Crater-Floor Materials; (4) Crater-Wall and Central Peak Materials; (5) Volcanic Shield and Dome Materials; (6) Transient-Event Materials; and (7) Meteoritic and Cometary Materials; This short list of likely discoveries isn't exhaustive. We know much about a few spots on the Moon, but little about the full range of lunar materials.

Vaniman, D.↗

Cepheid companions? FM Aquilae, FN Aquilae, RX Aurigae, Y Lacertae, and RS Orionis

IUE spectra have been used to search for companions of FN Aql and RX Aur, two classical Cepheids which have been tentatively identified as binary stars on the basis of cyclic variations in their pulsation periods. Three other Cepheids, FM Aql, Y Lac, and RS Ori, suspected of having blue companions from the (U-B), (B-V) diagram, have also been investigated. There is no indication of a companion of FM Aql, FN Aql, and RX Aur. If these stars have companions, they must be at least as cool as A0 V, Al V, and A1 V, respectively.

Evans, Nancy Remage↗

Optical calculation of correlation filters

A method is presented for designing optical correlation filters based on measuring intensity patterns in the Fourier plane. The method can be used in general to design any type of frequency plane filter but is especially attractive in the case of a binary phase only filter (BPOF). The method can produce a filter that is well matched to both the object, its transforming optical system and the spatial light modulator used in the correlator input plane. A working filter was produced using the technique, but the filter response was weak. The suspected causes of the weak output are imprecise Fourier plane positioning, nonlinearities in the recording process, and/or aliasing effects.

Knopp, Jerome↗

The shock process and light-element production in supernova envelopes

Detailed hydrodynamic modeling of the passage of supernova shocks through the hydrogen enevlopes of blue and red progenitor stars was carried out to explore the sensitivity to model conditions of light element production (specifically Li7 and B-11) which was noted by Dearborn, Schramm, Steigman and Truran (1989) (DSST). It is found that, for stellar models with M is less than or approximately 100 M solar mass, current state of the art supernova shocks do not produce significant light element yields by hydrodynamic processes alone. The dependence of this conclusion on stellar models and on shock strengths is explored. Preliminary implications for Galactic evolution of lithium are discussed, and it is suspected that intermediate mass red giant stars may be the most consistent production site for lithium.

Brown, Lawrence E.↗

A second outflow from L1551/IRS 5?

The detection of previously unreported high-velocity emission in the L1551 moleculaar cloud is reported. This emission may represent high-velocity molecular gas deflected out of the IRS 5 outflow or may indeed represent another independent outflow whose origin is IRS 5 or L1551NE. This region is revealed to be far more complex than previously suspected.

Moriarty-Schieven, G. H.↗

Update on results of SPRE testing at NASA

The space power research engine (SPRE I), a free-piston Stirling engine with a linear alternator, was tested as a candidate for high-capacity space power. A portion of the test data from the SPRE I, essentially in its baseline configuration while operating with helium at heat exchanger metal temperature ratios ranging from 1.6 to 2.4 and mean cycle pressures of 7.5 and 15.0 Mpa, are presented. HFAST computer code predictions are presented for comparison. The measured results at 7.5 and 15 MPa, from the first day, from the first day of testing, at temperature ratios from 1.6 to 2.0 agreed fairly well with the HFAST code predictions; within -8.8 percent to +11.9 percent for PV power and -2.7 to +1.07 percentage points for PV efficiency. Measured compression-space pressure amplitude was 5.1 to 11.1 percent below predictions; although these results were within the error bands, there was poorer agreement than observed for previous tests, and the transducer calibration is suspect. All of the dynamic pressure transducer calibrations will be verified before testing is resumed. Measured pressure phase angles were within -1.95 percent to +5.37 percent of the predictions, which is much closer than previously observed. The poor agreement of the measured heat flow to the heater with the code appears to be due to thermocouple degradation.

Cairelli, James E.↗

Thermal and mechanical damping of solar p-modes

Nonadiabatic effects associated with the transfer of energy and with turbulent stresses add small imaginary parts, omega-i(1) and omega-i(2), to solar p-mode eigenfrequencies. Numerical calculations have shown that these quite different processes make comparable contributions to omega-i at frequencies well below the acoustic cutoff at omega-ac. Analytic expressions are derived which reveal the connection between omega-i(1) and omega-i(2). The estimates yield omega-i proportional to omega exp 8 for omega much less than omega-ac in good agreement with the numerical calculations. However, the observed line width is proportional to omega exp 4.2 at low frequencies. It is suspected that there is an unmodeled component of perturbed convective energy transport or of turbulent viscosity that makes an important contribution to omega-i at omega much less than omega-ac.

Goldreich, Peter↗

The corrosion behavior of the T1 (Al2CuLi) intermetallic compound in aqueous environments

The intermetallic compound T1 (Al2CuLi) is suspected to play an important role in the localized corrosion at subgrain boundaries in Al-Li-Cu alloys. The intermetallic was synthesized for characterization of its corrosion behavior. Experiments performed included open circuit potential measurements, potentiodynamic polarization, and corrosion rate vs. pH in solutions whose pH was varied over the range of 3 to 11. Subgrain boundary pitting and continuous subgrain boundary corrosion are discussed in terms of the data obtained. Evidence suggesting the dealloying of copper from this compound is also presented.

Buchheit, R. G.↗