Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Inflatable Hangar for Assembly of Large Structures in Space

The NASA Human Space Flight program is interested in projects where humans, beyond low-Earth orbit (LEO), can make an important and unique contribution that cannot be reasonably accomplished purely by robotic means, and is commensurate with the effort and cost associated with human spaceflight. Robotic space telescope missions have been conceived and launched as completed assemblies (e.g., Hubble) or as jack-in-the-box one-time deployments (e.g., James Webb). If it were possible to assemble components of a very large telescope from one or two launches into a telescope that was vastly greater in light-gathering power and resolution, that would constitute a breakthrough. Large telescopes on Earth, like all one-off precision assembly tasks, are done by humans. Humans in shirtsleeves (or cleanroom bunny suits) can perform tasks of remarkable dexterity and precision. Unfortunately, astronauts in pressure suits cannot perform such dexterous and precise tasks because of the limitations of the pressurized gloves. If a large, inflatable hangar were placed in high orbit, along with all the components needed for a large assembly such as a large telescope, then humans in bunny suits could perform the same sorts of extremely precise and dexterous assembly that they could be expected to perform on Earth. Calculations show that such an inflatable hangar, and the necessary gas to make it safe to occupy by shirtsleeves humans wearing oxygen masks, fits within the mass and volume limitations of the proposed "Space Launch System" heavy-lift rocket. A second launch could bring up all the components of an approximately 100-meter-diameter or larger telescope. A large [200 ft (approximately 61 m) in diameter] inflated fabric sphere (or hangar) would contain four humans in bunny suits. The sphere would contain sufficient atmospheric pressure so that spacesuits would not be necessary [about 3.2 psi (approximately 22 kPa)]. The humans would require only oxygen masks and small backpacks similar to SCUBA tanks. The oxygen content of the gas would be about 35%, low enough to reduce fire risk but high enough to sustain life in the event of a failure of an oxygen mask. The bunnysuited astronauts could ride on long "cherry-picker" robots with foot restraints somewhat similar to the arm on the International Space Station. Other astronauts would maneuver freely with small propeller fans on their backpacks to provide thrust in the zero-g environment.

Wilcox, Brian H.↗
NASA NTRS2019

Modeling and simulation challenges for softgoods in space deployable structures

This paper examines modeling and simulation challenges for deployable spacecraft structures with softgood components. Previous studies highlighted the numerical challenges due to the mixture of high stiffness and low stiffness contact in this class of structures. This paper examines the use of the commercial LS-DYNA nonlinear finite element code on a set of relevant benchmark problems.

Mobrem, Mehran↗
NASA NTRS1983

Large, Easily Deployable Structures

Study of concepts for large space structures will interest those designing scaffolding, radio towers, rescue equipment, and prefabricated shelters. Double-fold, double-cell module was selected for further design and for zero gravity testing. Concept is viable for deployment by humans outside space vehicle as well as by remotely operated manipulator.

Agan, W. E.↗
NASA NTRS1978

Fabrication of composite shell structure for advanced space transportation

It is pointed out that future space missions, such as those involving spacecraft and structural assemblies to be used in geosynchronous orbits, will require ultralightweight composite structures to achieve maximum payloads. Of equal importance is the requirement to provide designs that are cost-competitive with metal designs. For space structures that must resist buckling, graphite-epoxy materials offer an attractive potential for providing lightweight, low-cost structural components that will meet future space mission requirements. A description is presented of a program which was conducted to evaluate the merits of graphite-epoxy cylindrical shells and to continue the development of a design data base for ultralightweight structures. An objective of the program was to design, fabricate, and test a corrugated graphite-epoxy cylinder 10 ft in diameter and 10 ft long.

Penton, A. P.↗
DOE OSTI2015

High pressure phase transitions in scheelite structured fluoride: ErLiF{sub 4}

Our synchrotron based angle dispersive x-ray diffraction studies on scheelite structured ErLiF{sub 4} show that it undergoes two phase transitions, at ~11.5 and ~15.5 GPa to lower symmetry monoclinic phases, before becoming (irreversibly) amorphous at ~28 GPa. The first high pressure phase transformation to the fergusonite structure (space group I2/a) is found to be of thermodynamically second order. The second high pressure phase could be fitted to the P2/c space group, but detailed analysis rules out the wolframite structure (P2/c space group), common to many scheelite compounds under high pressures. We also suggest that despite the ionic character of the LiF{sub 4} tetrahedra, the compressibility of LnLiF{sub 4} (Ln=Eu–Lu) kind of scheelites is more affected by the LnF{sub 8} dodecahedra than the LiF{sub 4} tetrahedra. - Graphical abstract: Volume per formula unit of the scheelite and high pressure phases of ErLiF{sub 4} as a function of pressure. - Highlights: • ErLiF{sub 4} transforms to fergusonite and P2/c phase at high pressure. • Polyhedra of LnF{sub 8} affects compressibility of LnLiF{sub 4} (Ln=Eu–Lu) more than LiF{sub 4}. • Amorphization pressure varies inversely in LnLiF{sub 4} with ionic size of Ln cation. • In ErLiF{sub 4}a/c ratio reduces with pressure in contrast to reported increase in YLiF{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Providing structural modules with self-integrity monitoring

With the advent of complex space structures (i.e., U.S. Space Station), the need for methods for remotely detecting structural damage will become greater. Some of these structures will have hundreds of individual structural elements (i.e., strut members). Should some of them become damaged, it could be virtually impossible to detect it using visual or similar inspection techniques. The damage of only a few individual members may or may not be a serious problem. However, should a significant number of the members be damaged, a significant problem could be created. The implementation of an appropriate remote damage detection scheme would greatly reduce the likelihood of a serious problem related to structural damage ever occurring. This report presents the results of the research conducted on remote structural damage detection approaches and the related mathematical algorithms. The research was conducted for the Small Business Innovation and Research (SBIR) Phase 2 National Aeronautics and Space Administration (NASA) Contract NAS7-961.

Walton, W. B.↗
NASA NTRS1976

OAST Theme Workshop. Volume 3: Working group summary. 8: Structures, dynamics (M-2). A. Statement. B. Technology needs (form 1). C. Priority assessments (form 2)

A technology program on large space structures was defined to respond to common need perceived for five of the six themes. Greatly expanded power, facilities, and communications/sensing requirements appear to demand a new structures technology for construction in space. Requirements to construct huge structural arrays with precision surfaces in space will need creative research efforts to identify practical structural elements and construction techniques. Requirements for advanced transportation structures were defined to respond to the space transportation theme. Because of the criticality of thermal structures to achieve lower cost transportation systems, renewed emphasis on technology in this area is recommended. A second technology needing renewed emphasis is the area of recovery and landing technology structures to permit full reuse of launch vehicle propulsion elements.

Source record↗
NASA NTRS1980

Structural sizing considerations for large space platforms

Structural optimization studies are made using mathematical programming techniques to examine minimum mass structural proportions of deployable and erectable tetrahedral truss platforms subject to the integrated effects of practical design requirements. Considerations integrated into the optimization process are: 1) lowest natural frequencies of the platform and individual platform components (struts); 2) packaging constraints imposed by the Shuttle cargo bay capacity; 3) initial curvature of the struts; 4) column buckling of the struts due to gravity gradient, orbital transfer, strut length tolerance, or design loads; and 5) practical lower limits for strut diameter and wall thickness. Ultra-low mass designs are shown to be possible with strut proportions much more slender than those conventionally used for earthbound application.

Heard, W. L., Jr.↗
NASA NTRS1986

Effects of thermal cycling on graphie-fiber-reinforced 6061 aluminum

Graphite-reinforced aluminum alloy metal-matrix composites are among materials being considered for structural components in dimensionally stable space structures. This application requires materials with low values of thermal expansions and high specific stiffnesses. They must remain stable during exposures to the space environment for periods extending to 20 years. The effects of thermal cycling on the thermal expansion behavior and mechanical properties of Thornel P100 graphite 6061 aluminum composites, as fabricated and after thermal processing to eliminate thermal strain hysteresis, have been investigated. Two groups of composites were studied: one was fabricated by hot roll bonding and the other by diffusion bonding. Processing significantly reduced strain hysteresis during thermal cycling in both groups and improved the ultimate tensile strength and modulus in the diffusion-bonded composites. Thermal cycling stabilized the as-fabricated composites by reducing the residual fabrication stress and increased the matrix strength by metallurgical aging. Thermal expansion behavior of both groups after processing was insensitive to thermal cycling. Data scatter was too large to determine effects of thermal cycling on the mechanical properties. The primary effects of processing and thermal cycling can be attributed to changes in the metallurgical condition and stress state of the matrix.

Dries, G. A.↗