Search NASA⌕ Search

SEARCH · Search NASA

Results for “Support effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Effect of Nucleophilicity on the Kinetics of CO 2 Insertion into Pincer-Supported Nickel Complexes

The insertion of CO 2 into metal-element σ bonds such as M-H, M-OH, and M-NH 2 is often proposed to be a key step in catalytic CO 2 conversion. Nevertheless, there are few experimental studies measuring the kinetics of CO 2 insertion or comparing insertion into L n M-E (E = H, OH, NH 2 ) complexes with the same ancillary ligands. Here, we use a rapid-mixing stopped-flow instrument to measure the rate of CO 2 insertion into ( tBu PCP)Ni(OH) ( tBu PCP = 2,6-C 6 H 3 (CH 2 P t Bu 2 ) 2 ) and show that it proceeds at a faster rate in comparison to insertion into the corresponding metal hydride. We also demonstrate that the rate of CO 2 insertion into ( tBu PCP)Ni(OH) can generally be increased by using solvents with higher acceptor numbers or by modifying the ligand scaffold to reduce steric bulk or increase electron donation to the metal center. We also attempt to measure the rate of CO 2 insertion into ( tBu PCP)Ni(NH 2 ); however, this reaction is too fast to measure with our methodology. This work enables the direct comparison of CO 2 insertion into analogous L n M-E (E = H, OH, NH 2 ) systems and provides quantitative experimental evidence that the rate of insertion into a metal-element σ bond correlates with the nucleophilicity of E.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MIRD Dose Estimate Report No. 20: Radiation Absorbed-Dose Estimates for 111In- and 90Y-Ibritumomab Tiuxetan

Absorbed dose calculations provide a scientific basis for evaluating the biological effects associated with administered radiopharmaceuticals. In cancer therapy, radiation dosimetry also supports treatment planning, dose-response analyses, predictions of therapy effectiveness, and completeness of patient medical records. In this study, we evaluated the organ radiation absorbed doses resulting from intravenously administered 111In- and 90Y-Ibritumomab Tiuxetan (Zevalin). Methods: Ten patients (six male, four female) with non-Hodgkin’s lymphoma, cared for at three different medical centers, were administered tracer 111In-Ibritumomab Tiuxetan and were assessed using planar scintillation camera imaging at five time points, blood clearance measurements, and CT-organ volumetrics, to determine patient-specific organ biokinetics and dosimetry. Explicit attenuation correction based on transmission scan or transmission measurements provided the fraction of 111In administered activity in seven major organs, the whole body, and remainder tissues over time through complete decay. Activity-time curves were constructed, and radiation doses were calculated using MIRD methods and implementing software (OLINDA-EXM). Results: Mean radiation absorbed doses in 10 cancer patients for 111In- and for 90-Y-Ibritumomab Tiuxetan are reported for 24 organs and the whole body. Biological uptake and retention data are given for seven major source organs, remainder tissues, and the whole body. Median absorbed dose values calculated by this method were compared to previously published dosimetry for Zevalin and the product package insert. Conclusions: Careful dosimetry techniques provide useful information on absorbed dose from administered radiopharmaceuticals in patients. The importance of patient-specific dosimetry emerges in high-dose radioimmunotherapy when the objective of treatment planning is to achieve disease cures safely by limiting radiation doses to any critical normal organ to a maximum tolerable value.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Systematic Structure–Property Relationship Studies in Palladium-Catalyzed Methane Complete Combustion

To limit further rising levels in methane emissions from stationary and mobile sources and to enable promising technologies based on methane, the development of efficient combustion catalysts that completely oxidize CH 4 to CO 2 and H 2 O at low temperatures in the presence of high steam concentrations is required. Palladium is widely considered as one of the most promising materials for this reaction, and a better understanding of the factors affecting its activity and stability is crucial to design even more improved catalysts that efficiently utilize this precious metal. Here we report a study of the effect of three important variables (particle size, support, and reaction conditions including water) on the activity of supported Pd catalysts. We use uniform palladium nanocrystals as catalyst precursors to prepare a library of well-defined catalysts to systematically describe structure–property relationships with help from theory and in situ X-ray absorption spectroscopy. With this approach, we confirm that PdO is the most active phase and that small differences in reaction rates as a function of size are likely due to variations in the surface crystal structure. We further demonstrate that the support exerts a limited influence on the PdO activity, with inert (SiO 2 ), acidic (Al 2 O 3 ), and redox-active (Ce 0.8 Zr 0.2 O 2 ) supports providing similar rates, while basic (MgO) supports show remarkably lower activity. Finally, we show that the introduction of steam leads to a considerable decrease in rates that is due to coverage effects, rather than structural and/or phase changes. Altogether, the data suggest that to further increase the activity and stability of Pd-based catalysts for methane combustion, increasing the surface area of supported PdO phases while avoiding strong adsorption of water on the catalytic surfaces is required. Furthermore, this study clarifies contrasting reports in the literature about the active phase and stability of Pd-based materials for methane combustion.

36 MATERIALS SCIENCE↗

Effect of operating parameters on H 2 /CO 2 conversion to methanol over Cu-Zn oxide supported on ZrO 2 polymorph catalysts: Characterization and kinetics

Kinetic aspects of the operating parameters for the catalytic conversion of H 2 /CO 2 to methanol over two novel catalysts were evaluated to understand the effect of the polymorphic ZrO 2 phase composed of Cu 0/+ -ZnO sites at the atomic level and its impact on the reaction mechanism. The catalysts were characterized by in situ and ex-situ XRD, N 2 adsorption/desorption isotherms, FRX, TPR, TPD-N 2 O, in situ XANES, TPD-CO 2 , and in situ DRIFTS techniques. The influence of different reaction variables such as the GHSV, temperature, pressure, and H 2 /CO 2 ratio were studied using a fixed bed continuous plug flow reactor. The Cu-ZnO catalyst supported on the tetragonal zirconia polymorph exhibited the highest methanol yield due to the lower activation energy when compared to the catalyst with a greater amount of the monoclinic phase. In addition, the catalysts were reused for 8 cycles of 6 hours to evaluate their stability, which can translate into lower costs for large-scale methanol production. As a result, the estimation of the kinetic parameters over Cu-Zn oxide supported on ZrO 2 polymorphs was significant for understanding the reaction mechanism, as well as to provide a pathway for scaling-up of the process.

36 MATERIALS SCIENCE↗

Trace Levels of Copper in Carbon Materials Show Significant Electrochemical CO 2 Reduction Activity

Carbon materials are frequently used as supports for electrocatalysts because they are conductive and have high surface area. However, recent studies have shown that these materials can contain significant levels of metallic impurities that can dramatically alter their electrochemical properties. Here, the electrocatalytic activity of pure graphite (PG), graphene oxide (GO), and carbon nanotubes (CNT) dispersed on glassy carbon (GC) are investigated for the electrochemical CO 2 reduction reaction (CO 2 RR) in aqueous solution. It was observed that GO and CNT dispersed on GC all exhibit significant electrochemical activity that can be ascribed to impurities of Ni, Fe, Mn, and Cu. The level of Cu in GO can be particularly high and is the cause for the appearance of methane in the products produced over this material when it is used for the CO 2 RR. Washing these supports in ultrapure nitric acid is effective in removing the metal impurities and results in a reduction in the electrochemical activity of these forms of carbon. In particular, for GO, nearly all of the catalytically relevant metals can be removed. Electrochemical deposition of Cu on GO and PG supported on GC, and on GC itself, increased both the electrochemical activity of these materials and the production of methane via the CO 2 RR. Particularly high rates of methane formation per unit of Cu mass were obtained for Cu electrodeposited on GO and PG supported on GC. We suggest that this high activity may be due to the preferential deposition of Cu onto defects present in the graphene sheets comprising these materials.

36 MATERIALS SCIENCE↗

ZPPR Test Bed (ZTB) Pre-Conceptual Design Report

Authorized by the Nuclear Energy Innovation Capabilities Act (NEICA), the National Reactor Innovation Center (NRIC) provides private sector technology developers access to strategic infrastructures and assets for commercial nuclear energy research, development, demonstration, and deployment activities. The mission is to support a timely and cost-effective path to the licensing and commercialization of new nuclear energy systems. To meet these needs, NRIC is developing two reactor demonstration test beds at Idaho National Laboratory (INL), the ZPPR Test bed (ZTB) and the EBR-II Test bed (ETB). ZTB will support the demonstration of systems that operate at less than 500 kWt. The baseline objective is for the ZPPR Cell to act as a confinement structure capable of siting reactors that utilize Safeguards Category 1 material for operations. The major areas addressed in the pre-conceptual design include: • Installation of an access door • Electrical Power • Heat Removal • Ventilation in the Cell • Reactor Installation Along with the design for ZTB, a concept of operations (COP) has also been developed. The COP is intended to facilitate a common understanding of ideas, challenges, and issues. As systems continue to evolve in complexity System Engineers and Project Directors will utilize and update the COP to develop and sustain a common vision of the system for stakeholders.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NDE Technology Development Program for Non-Visual Volumetric Inspection Technology - Phase I Summary Report

This report provides a summary of the outcomes and findings of the sensor testing and evaluation work performed in FY2017 and first quarter of FY2018 under Phase I of the NDE Technology Development Program. The objective of this summary report is to provide a condensed version of the information provided in the Phase I program plan, Phase I test plan, the two comprehensive Phase I interim test reports issued for Technology Screening and advanced Sensor Effectiveness Testing, and the results from testing and demonstrations conducted Post-Sensor Effectiveness Testing for the purpose of supporting the selection of sensor technologies for maturation under Phase II. The orthogonal research and planning that should accompany technology maturation to support Phase II and Phase III are also included. The full details of the test mock-ups and flaws, sensor technologies, tests, evaluation criteria, and evaluation results are included in Phase I and provided in the interim Phase I test reports on Technology Screening and Sensor Effectiveness Testing.

47 OTHER INSTRUMENTATION↗

NRIC EBR-II Test Bed Pre-Conceptual Design Report

Authorized by the Nuclear Energy Innovation Capabilities Act (NEICA), the National Reactor Innovation Center (NRIC) provides private sector technology developers access to strategic infrastructures and assets for commercial nuclear energy research, development, demonstration, and deployment activities. The mission is to support a timely and cost-effective path to the licensing and commercialization of new nuclear energy systems. To meet these needs, NRIC is developing two test beds at Idaho National Laboratory (INL). The ZPPR Test bed (ZTB) and the EBR-II Test bed (ETB). The EBR-II test bed will support the demonstration of systems that operate at less than 10 MWt. The baseline objective is for the EBR-II Dome to act as a safety significant containment structure capable of siting reactors that utilize Safeguards Category 4 material for operations. The major areas addressed in the pre-conceptual design include: • Installation of an access door • Electrical Power • Heat Removal • Ventilation in the Dome • Module handling system Along with the design for ETB a concept of operations (COP) has also been developed. The COP is intended to facilitate a common understanding of ideas, challenges, and issues. As systems continue to evolve in complexity System Engineers and Project Directors will utilize the COP to develop and sustain a common vision of the system for stakeholders.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗