Search NASA⌕ Search

SEARCH · Search NASA

Results for “Waste Form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Development of a Safe Technology for the Treatment of Sodium Waste: Early Experience

In the primary circuit of fast breeder reactors and in some other nuclear facilities, elemental alkali metals are being used as coolant. SCK.CEN, the Belgian Nuclear Research Centre, has carried out several experiments involving molten sodium as coolant, mainly to qualify fuel elements for fast breeder reactors, to assess the thermal and postirradiation behavior of the fuel in the presence of sodium, and to assess the post-accidental heat removal from damaged fuel pins. At the end of the campaigns the fuel bundles were provisionally stored, lacking an effective process for the safe treatment of contaminated sodium. Some years ago SCK.CEN started to look for an efficient and safe technology for this waste resulting in a waste form which is ready for further conditioning. Direct controlled oxidation with water or with an alcohol was considered to be inadequate for our purposes mostly for safety reasons and because of possible complications during the further immobilization of the produced waste. Recently we started the development of a simple and safe batch process to meet safety requirements and which would render the sodium into a non-reactive form, compatible with the further conditioning of the waste into an acceptable form. The proposed process is a three-step reaction in a batch reactor. The end product is sodium carbonate containing the radionuclides. At the end the sodium carbonate can be immobilized in a concrete or glass matrix. During this process no hydrogen is formed, while the turbulent conditions guarantee a complete conversion of the metal and excellent heat transfer capabilities, eliminating explosion risks. After initial testing of the process on lab scale, a small pilot installation was constructed to demonstrate the process with non-active sodium in batches of about 1-5 kg sodium in 50 kg sodium carbonate. The paper will describe the process, technique and results of the cold tests. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Iron polyphosphate glasses for waste immobilization

Abstract Iron polyphosphate glasses resist attack by water, can dissolve large concentrations of species that are otherwise insoluble in borosilicate glass melts, and can be processed at relatively low temperatures (1000‐1200°C), and so are viable hosts for vitrifying hazardous and radioactive wastes. The properties of iron polyphosphate glasses depend on the distributions of phosphate anions and the nature of the bonds between those anions and various metal polyhedra, and quantitative information can be obtained about those structures using a variety of spectroscopic, diffraction, and chromatographic techniques. This structural information helps explain compositional trends in properties, including dissolution rates, electrical conductivity, thermal properties and crystallization tendency. Studies of waste forms made with low activity and high level wastes are reviewed and related back to an understanding of the structures and properties of simpler iron polyphosphate glasses.

Brow, Richard K.↗

Environmental Assessment for Use of DOE-Owned High-Assay Low-Enriched Uranium Stored at Idaho National Laboratory

The U.S. Department of Energy (DOE) proposes to make available about 10 Metric Tons (MT) of High-Assay Low-Enriched Uranium (HALEU ) feedstock produced through the electrometallurgical treatment (EMT) process, and other small quantities of HALEU stored at Idaho National Laboratory (INL) for research development & demonstration in support of the commercial nuclear industry and government agencies, including use in advanced reactors. HALEU is a term applied to uranium that is enriched in the uranium-235 (U-235) isotope to a value that is 5% to 20% of the total uranium. Private sector advanced nuclear reactor designs and advanced nuclear fuel designs call for use of HALEU, but currently no commercial facility manufactures HALEU. DOE proposes to expand the fuel fabrication capability at INL to produce HALEU fuel at INL from 10 MT of HALEU feedstock to meet near-term needs. The production requires expansion of the fuel fabrication capability, including the purchase of new equipment and use of facilities at INL’s Materials and Fuels Complex (MFC) and the Idaho Nuclear Technology and Engineering Center (INTEC). DOE has made no decision on the specific use of the fuel. The fuel could be used in advanced reactor design or for the purpose of research and development. DOE would work with other Federal agencies and commercial vendors to determine use of HALEU fuel. Use of this HALEU, including its potential use in a future nuclear reactor, will be analyzed in future National Environmental Policy Act (NEPA) documents by the appropriate agency. The EMT process in operation at the INL converts sodium-bonded spent nuclear fuel into waste forms suitable for disposal as high-level waste and a HALEU product that is unsuitable for diversion to nuclear weapons but could be either reused in fuel or disposed of as waste. The Final Environmental Impact Statement for the Treatment and Management of Sodium-Bonded Spent Nuclear Fuel, DOE/EIS-0306, DOE 2000) discussed the EMT process, but did not make a decision on the disposition or use of the HALEU product from the EMT process. This Environmental Assessment (EA) addresses the HALEU product as HALEU feedstock in production of HALEU fuel.

99 GENERAL AND MISCELLANEOUS↗

Polychlorinated Biphenyl Compliance Issues in the 21. Century: Poorly Recognized and Potentially Devastating

Thirty-one years have passed since the United States Congress passed the Toxic Substances Control Act (TSCA). The 1976 law essentially eliminated future production of polychlorinated biphenyls (PCBs) within the United States and greatly limited the use of previously manufactured PCBs and PCB products. The ultimate objective of the law was the complete elimination of these chemicals due to concerns about their potentially toxic effects on health and the environment. PCBs were manufactured in the United States between 1929 and 1977. They were highly valued for their fire and heat-resistance properties and for their chemical stability. As a result, PCBs were used in a variety of thermally and/or chemically stressful applications. They did not conduct electricity and therefore were particularly well-suited for use as insulating fluids in high-voltage electric equipment. PCBs were also used in various other applications, such as in hydraulic and heat transfer fluids. Strict controls on the use and disposal of PCBs were imposed by the TSCA implementing regulations at 40 CFR 761. As a result, most heavy users of PCB products worked hard to curtail their PCB use. Many organizations that once used substantial amounts of PCBs, subsequently declared themselves 'PCB free'. Unfortunately, in many cases, these 'PCB-free' declarations were premature, as PCBs were used in many more applications than insulating fluids. From the 1990's and to the present day, PCBs increasingly have been discovered in non-liquid forms. These materials were used or installed in facilities constructed before the 1979 'PCB ban'. Examples include applied paints and coatings, caulking, pre-formed joint filler, and plastic or rubber wire and cable insulation. Proper identification of these materials is necessary for appropriate and compliant waste management during deactivation and decommissioning (D and D) activities. PCBs can pose other significant waste management issues for D and D projects, particularly for nuclear facilities. Depending upon the waste form and the intended disposal path, PCBs can be regulated at thresholds in the low parts-per-billion (ppb). These low regulatory thresholds often are overlooked due to the erroneous belief by many waste management professionals that materials containing PCBs are regulated by TSCA only if their PCB concentration is at least 50 parts-per-million (ppm). Failure to recognize when and how the lower thresholds apply can lead to rejection of the waste materials by treatment, storage and disposal (TSD) facilities as well as potential regulatory non-compliance. Furthermore, re-use of 'excess' materials with PCBs is also regulated by TSCA. In the event of a characterization error, the costs required to make necessary corrections can be very high. This paper will focus on PCB characterization and waste management issues associated with D and D of DOE nuclear facilities. It will identify PCB materials that are likely to be present in such facilities, with emphasis on the nonliquid PCB forms. The paper will discuss characterization pitfalls associated with Non-Liquid PCBs (NLPCBs), including circumstances in which NLPCBs can migrate into other materials. The paper also will identify TSCA requirements for materials with very low concentrations of PCBs; certain materials are regulated at concentrations as low as 0.5 {mu}g/L PCBs (approximately 0.5 ppb). The paper will then examine the potentially extensive impacts to a facility if the materials are not managed in a TSCA-compliant manner. Examples from a recent D and D project at the DOE Savannah River Site will be used to illustrate key points and lessons learned. It is expected that this information would be useful to other DOE sites, DoD installations and commercial nuclear facilities constructed prior to 1979. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Performance Test and Evaluation on Polymer Form of Carbonized Waste - 19164

A carbonized waste is a material obtained by treating combustible wastes with superheated steam for volume reduction. A surrogate-carbonized waste was solidified to a monolith type of polymer form by using epoxy resin because it was obtained in powder form. The polymer form of carbonized waste was tested in accordance with standardized methods to evaluate its performance in terms of its mechanical integrity, durability, leaching properties, and microbiological stability for final disposal in Korea. Performance test results demonstrate that the polymer form of carbonized waste has excellent mechanical integrity and retains its structural integrity after thermal cycling, irradiation and 90-day water immersion. Leachability indices for cesium, cobalt, and strontium of the polymer form of carbonized waste were better than those required of a final disposal site in Korea. In addition, no culture growth of fungi or bacteria and no biodegradation were observed on the polymer form of carbonized waste. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Review of Mercury in the SRS Tank Waste Storage and Treatment Processes for Applicability to Hanford Waste Processing

The Savannah River Site (SRS) and Hanford produced large quantities of plutonium and other radioisotopes. The separations processes recovered plutonium and produced large quantities of High- Level Waste (HLW) that accumulated at each site in large, underground storage tanks. SRS has been retrieving the stored HLW, pretreating the waste for immobilization, and immobilizing the waste in glass or grout waste forms since the mid-1990s. Treatment of the waste at Hanford is expected to start in the early 2020s. Mercury is present in both the SRS and Hanford tank waste. SRS has recently completed an evaluation of mercury speciation throughout the tank waste treatment and immobilization flowsheet. This study was reviewed to determine what information from the study can be applied to the Hanford tank waste treatment program.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In-House Alternative for Chemical Analyses of Rhenium and Sulfur in Glass

Accurate measurements of rhenium (Re) and sulfur (S) concentrations in solid samples are of critical importance for the key research activities at the Pacific Northwest National Laboratory (PNNL) Waste Form Development Laboratory (WFDL) related to Re behavior during waste glass melting process and solubility of S in glass. Southwest Research Institute (SwRI) has provided reliable services for chemical analysis needs at WFDL; however, its long turnaround time, occasionally up to 5 months, has caused some difficulties. An in-house method was developed for dissolving and fusing glass and feed samples in preparation for analyses by inductively coupled plasma-optical emission spectrometry and -mass spectrometry at a PNNL facility. Using a previously developed sodium hydroxide fusion method as a basis, four groups of samples from Hanford waste glass research were digested and fused at WFDL. The samples included 1) Enhanced low-activity waste glass correlation phase 2/3 melter glasses from the Vitreous State Laboratory at the Catholic University of America, 2) AN-102 dried feeds and glasses, 3) SS-AN-102 dried feeds and glasses, and 4) Integrated Research Project S solubility study glasses. We evaluated three different sets of solution preparation and analysis combinations, which included 1) a WFDL-prepared solution analyzed at SwRI, 2) a PNNLprepared solution analyzed at a laboratory in the Building-331at PNNL, and 3) an SwRIprepared solution analyzed at SwRI. We concluded that the PNNL in-house Re results can be used in parallel with the SwRI data based on the relative standard deviation values less than 6% from three different sets of solution preparation and analysis for all three groups of rhenium-containing samples tested. However, it was proposed that the in-house S data be used for the barium oxide-free glasses only because of the issue of barium sulfate precipitation in digestion/fusion solutions prepared from glasses containing barium oxide. In addition, higher analytical biases between the PNNL and SwRI S results are expected compared to the Re results, based on the relative standard deviation values of less than 10% from three different sets of solution preparation and analysis for two groups of S-containing samples.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Melter Tests to Define LAW Halide, Chromium and Phosphate Concentrations, VSL-14R3070-1 (February 2014)

The Office of River Protection is examining options to optimize the Low Activity Waste (LAW) Facility and LAW glass waste form. One option under evaluation is to enhance the waste processing rate of the vitrification plant currently under construction. It is likely that the capacity of the LAW vitrification plant can be increased incrementally by implementation of a variety of low-risk, high-probability changes, either separately or in combination. The present work addressed the potential formation of secondary sulfate phases while processing high waste loading LAW formulations with elevated halide, chromium, and phosphate feed concentrations over a wide range of LAW waste types, including those with high potassium concentrations. The present work will be followed by a second phase of testing, described in a separate Test Plan, the results of which will be reported elsewhere. The combined results from these tests will be used as inputs to develop concentration limits for these components in the LAW glass property-composition models and to support the modification and updating of the current WTP LAW glass formulation algorithm.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Improved High-Alkali Low-Activity Waste Formulations. VSL-15R3290-1, Rev. 0 (Final Report)

The Office of River Protection is examining options to optimize the Low Activity Waste (LAW) Facility and LAW glass waste form. One option under evaluation is to enhance the waste processing rate of the vitrification plant currently under construction. It is likely that the capacity of the LAW vitrification plant can be increased incrementally by implementation of a variety of low-risk, high-probability changes, either separately or in combination. The Vitreous State Laboratory (VSL) at The Catholic University of America (CUA) and EnergySolutions, Inc. have evaluated several of these potential incremental improvements for ORP in support of its evaluation of WTP LAW facility optimization. The present work was conducted using a Hanford LAW composition with low sulfur-to-sodium ratio with the objective of determining the maximum waste loading that can be achieved without Cr 2 O 3 addition by employing alternatives to control K-3 corrosion. LAW from Hanford Tank AN-105 and the glass formulation ORPLA20, which was previously developed to treat this waste, were selected as the base compositions for this study. As shown in Table 1.1, the ORPLA20 glass composition has a waste loading of 31.5 wt% and a sodium content of 24 wt% Na 2 O. Other major components contributed by the waste are Al 2 O 3 , SO 3 , Cl and K 2 O at concentrations of 5.55, 0.70, 0.67 and 0.53 wt%, respectively.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Space disposal of nuclear wastes

The DOE has been studying several options for nuclear waste disposal, among them space disposal, which NASA has been assessing. Attention is given to space disposal destinations noting that a circular heliocentric orbit about halfway between Earth and Venus is the reference option in space disposal studies. Discussion also covers the waste form, showing that parameters to be considered include high waste loading, high thermal conductivity, thermochemical stability, resistance to leaching, fabrication, resistance to oxidation and to thermal shock. Finally, the Space Shuttle nuclear waste disposal mission profile is presented.

Priest, C. C.↗

Arsenic Speciation in Wastes Resulting From Pressure Oxidation, Roasting and Smelting

Arsenic commonly occurs in elevated concentrations in some gold and base-metal deposits. Mining and metallurgical processing of gold and base-metal ores results in solid wastes, effluents, and air emissions containing high concentrations of arsenic. Such wastes form an important source of anthropogenic arsenic in the environment. The nature and occurrence of arsenic in solid wastes are complex and highly variable. A combination of microanalytical tools and techniques including XAFS were used to determine the form and speciation of arsenic in wastes resulting from pressure oxidation, roasting and smelting, and impacted soil. As K-edge and Fe K-edge XAFS analyses of the pressure oxidation residues indicate that arsenic in tetrahedral coordination is corner-linked to 5 to 6 FeO{sub 6} octahedra that are edge- and perhaps face-sharing. During roasting of refractory gold ores, oxidation of As to As{sub 2}O{sub 5} species may be incomplete, which is detrimental to not only gold recovery but also the tailings management options. As K-edge XANES spectra indicate that more than one-third of the arsenic released from a copper smelter stack is composed of As{sup 3+} species. Most likely arsenic species in the smelter-impacted soil include arsenolite, goethite with adsorbed As{sup 5+}, monomethylarsonic acidm, and tetramethylarsonium iodide.

54 ENVIRONMENTAL SCIENCES↗

Inorganic tin aluminophosphate nanocomposite for reductive separation of pertechnetate

Pertechnetate (TcO4-) is the most abundant chemical form of radioactive contaminant 99Tc present in the legacy nuclear waste streams and in the subsurface of the nuclear waste storage sites.One proposed remediation approach is reductive separation of TcO4-and sequestration in low-temperature waste forms. The development of the relevant technologies has been slow due to the lack of reductive materials that retain their functionalityand are otherwise suitable for application in multicomponent or aggressive media such as highly alkaline, brine-like solutions typifying nuclear tank wastes. This research prepared a tin-based reductive material and demonstrated its potential utility for the separation of TcO4- from the alkaline nuclear wastes. This material consists of Sn(II/IV) phosphate supported by the polycrystalline aluminophosphate matrix. The aluminophosphate matrix is inert to the reaction conditions and offers the benefits of high stability and low solubility in the concentrated alkaline solutions. This Sn(II/IV)-basedmaterial exhibitshigh loading capacity for Tc and selectively removed major fraction of TcO4-from the tank waste supernatant simulants, which contains 7.8 M total sodium and 2.43 M free hydroxide concentrations. The observed Kd values for Tc are about 13,000 and 2,200 mL g-1 for the simulant solutions containing no or 33 mM Cr(VI), respectively, positioning Sn(II/IV) aluminophosphate among the best performing reductive sorbents for TcO4- developed to date. This advanced behaviour is attributed to the synergistic combination of the Sn(II/IV) aluminophosphate functionalities. The presence of Sn(II/IV)-rich fibres facilitates the reduction of TcO4- to Tc(IV), which getsimbedded along the fibre branches. Importantly, the Sn(IV)-containing inert polycrystalline matrix alsoincorporates Tc(IV)which triggers its crystallization to rutile SnO2 phase andstabilizesTc(IV) in the polycrystalline matrix.

Environmental Molecular Sciences Laboratory↗

Composite Analysis Solid Waste Release Data Reduction of Activity Flux from Waste Sites to the Vadose Zone for Baseline Assessment

This environmental calculation file (ECF) describes the data reduction methodology for the solid waste release datasets generated by the Composite Analysis Solid Waste Release (CASWR) model (CP-62766, Model Package Report: Composite Analysis Solid Waste Release Model [CASWR Model]) and documents the resulting reduced datasets for the updated Composite Analysis (CA) baseline assessment. This ECF is in support of the updated Hanford Site CA. The purpose of the updated Hanford Site CA is to provide an estimate of the cumulative radiological impacts from active and planned low-level radioactive waste disposals and other potentially interacting radioactive waste disposal sources that will remain following Hanford Site closure. The vadose zone modeling activities associated with the CA includes solid waste forms as contaminant sources. To support the modeling of solid waste transport from the vadose zone to the groundwater at the Hanford Site, the CASWR model was designed to generate deterministic radionuclide release rates for the Hanford Site Central Plateau solid waste disposal sites. The complete CASWR model-generated dataset for the CA Baseline Assessment consists of 2,378,831 sets of time and release rates (1,073,869 sets for the 200 East Area and 1,304,962 sets for the 200 West Area), representing a course of the simulation from year 1953 to year 12,069, 16 radiological contaminants of potential concern (COPCs), and 237 solid waste sources as documented in ECFHANFORD- 19-0112, Solid Waste Release Calculations for the Composite Analysis Baseline Assessment. For several of the STOMP vadose zone models, the number of release rate data pairs required for release at all waste sites would exceed the limitations imposed by the STOMP modelling software package used to simulate contaminant transport through the vadose zone. As a result, a data reduction of the CASWR dataset is required prior to its use as a source input for the CA vadose zone modeling activities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Affinity of LDR Organics to Cementitious Materials and Activated Carbon

The Hanford site stores approximately 56 million gallons of radioactive and hazardous waste in underground storage tanks. The current low-activity waste (LAW) vitrification facility does not have the capacity to immobilize all of the LAW. Therefore, cementitious waste forms are being evaluated as a cost-effective supplemental waste treatment, focusing on the solidification/immobilization of Land Disposal Restricted (LDR) organics, which is currently not recognized by the Environmental Protection Agency (EPA) as a standard treatment method (40 CFR 268.42). Previous efforts by the EPA and waste management agencies have highlighted the potential for cementitious materials to retain certain organic species through physical (encapsulation) and chemical (sorption) interactions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Stabilization of Radionuclides and Metals into Spinels Using THOR{sup R} Fluidized Bed Steam Reforming - 12039

Studsvik, Inc.'s Thermal Organic Reduction (THOR) Process has been operating for over 12 years in the treatment of radioactive liquid and solid wastes from commercial Nuclear Power Plants in the United States. A second THOR plant is starting operations in early 2012 for the treatment of radioactive wastes from US nuclear power research at US DOE's Idaho National Laboratory. THOR has long been recognized for its unique ability to substantially reduce the volume of radioactive wastes - via the removal of water and destruction of organics, nitrates/nitrites, etc.- and produce a dry, stable solid product while retaining extremely high amounts (>99.99%) of the incoming wastes' radioactivity. Moreover, the THOR process has demonstrated the ability to produce radioactive waste forms with leach-resistance as good as or better than vitrified glass. An additional facet of the technology which, to this point, has been marginalized is the production spinels that are essential for capturing volatile, leachable, and large radioactive and hazardous inorganic species. These spinels form from the wide variety of inorganics in the incoming waste feed and proprietary additives used in processing. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Initiating the Validation of CCIM Processability for Multi-phase all Ceramic (SYNROC) HLW Form: Plan for Test BFY14CCIM-C

This plan covers test BFY14CCIM-C which will be a first–of–its-kind demonstration for the complete non-radioactive surrogate production of multi-phase ceramic (SYNROC) High Level Waste Forms (HLW) using Cold Crucible Induction Melting (CCIM) Technology. The test will occur in the Idaho National Laboratory’s (INL) CCIM Pilot Plant and is tentatively scheduled for the week of September 15, 2014. The purpose of the test is to begin collecting qualitative data for validating the ceramic HLW form processability advantages using CCIM technology- as opposed to existing ceramic–lined Joule Heated Melters (JHM) currently producing BSG HLW forms. The major objectives of BFY14CCIM-C are to complete crystalline melt initiation with a new joule-heated resistive starter ring, sustain inductive melting at temperatures between 1600 to 1700°C for two different relatively high conductive materials representative of the SYNROC ceramic formation inclusive of a HLW surrogate, complete melter tapping and pouring of molten ceramic material in to a preheated 4 inch graphite canister and a similar canister at room temperature. Other goals include assessing the performance of a new crucible specially designed to accommodate the tapping and pouring of pure crystalline forms in contrast to less recalcitrant amorphous glass, assessing the overall operational effectiveness of melt initiation using a resistive starter ring with a dedicated power source, and observing the tapped molten flow and subsequent relatively quick crystallization behavior in pans with areas identical to standard HLW disposal canisters. Surrogate waste compositions with ceramic SYNROC forming additives and their measured properties for inductive melting, testing parameters, pre-test conditions and modifications, data collection requirements, and sampling/post-demonstration analysis requirements for the produced forms are provided and defined.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

HYDRAULIC AND PHYSICAL PROPERTIES OF SALTSTONE GROUTS AND VAULT CONCRETES

The Saltstone Disposal Facility (SDF), located in the Z-Area of the Savannah River Site (SRS), is used for the disposal of low-level radioactive salt solution. The SDF currently contains two vaults: Vault 1 (6 cells) and Vault 4 (12 cells). Additional disposal cells are currently in the design phase. The individual cells of the saltstone facility are filled with saltstone. Saltstone is produced by mixing the low-level radioactive salt solution, with blast furnace slag, fly ash, and cement (dry premix) to form a dense, micro-porous, monolithic, low-level radioactive waste form. The saltstone is pumped into the disposal cells where it subsequently solidifies. Significant effort has been undertaken to accurately model the movement of water and contaminants through the facility. Key to this effort is an accurate understanding of the hydraulic and physical properties of the solidified saltstone. To date, limited testing has been conducted to characterize the saltstone. The primary focus of this task was to estimate the hydraulic and physical properties of three types of saltstone and two vault concretes. The saltstone formulations included saltstone premix batched with (1) Deliquification, Dissolution, and Adjustment (DDA) salt simulant (w/pm 0.60), (2) Actinide Removal Process (ARP)/Modular Caustic Side Solvent Extraction Unit (MCU) salt simulant (w/pm 0.60), and (3) Salt Waste Processing Facility (SWPF) salt simulant (w/pm 0.60). The vault concrete formulations tested included the Vault 1/4 concrete and two variations of the Vault 2 concrete (Mix 1 and Mix 2). Wet properties measured for the saltstone formulations included yield stress, plastic viscosity, wet unit weight, bleed water volume, gel time, set time, and heat of hydration. Hydraulic and physical properties measured on the cured saltstone and concrete samples included saturated hydraulic conductivity, moisture retention, compressive strength, porosity, particle density, and dry bulk density. These properties were determined following a minimum 28 day curing period. Additional testing of the three saltstone formulations was conducted following a minimum 90 day curing period. The compressive strength of each saltstone and concrete material was measured at approximately 14, 28, 56, and 90 days. Recommended hydraulic property values for each saltstone grout and the vault concretes are provided. The hydraulic properties provided for each material include the saturated hydraulic conductivity, dry bulk density, particle density, and porosity. In addition, water retention data are presented for each material along with the van Genuchten transport parameters as determined using the RETC code.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗