Search NASA⌕ Search

SEARCH · Search NASA

Results for “base flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Drag reduction at a plane wall

The objective is to determine by analytical means how drag on a plane wall may be modified favorably using a minimal amount of flow information - preferably only information at the wall. What quantities should be measured? How should that information be assimilated in order to arrive at effective control? As a prototypical problem, incompressible, viscous flow, governed by the Navier-Stokes equations, past a plane wall at which the no-slip condition was modified was considered. The streamwise and spanwise velocity components are required to be zero, but the normal component is to be specified according to some control law. The challenge is to choose the wall-normal velocity component based on flow conditions at the wall so that the mean drag is as small as possible. There can be no net mass flux through the wall, and the total available control energy is constrained. A turbulent flow is highly unsteady and has detailed spatial structure. The mean drag on the wall is the integral over the wall of the local shear forces exerted by the fluid, which is then averaged in time; it is a 'macroscopic' property of the flow. It is not obvious how unsteady boundary control is to be applied in order to modify the mean flow most effectively, especially in view of the non- self-adjoint nature of the governing equations. An approximate analytical solution to the suboptimal scheme is pursued.

Hill, D. C.↗

Experimental Determination of the Recovery Factor and Analytical Solution of the Conical Flow Field for a 20 deg Included Angle Cone at Mach Numbers of 4.6 and 6.0 and Stagnation Temperatures to 2600 degree R

The local recovery factor was determined experimentally along the surface of a thin-walled 20 deg included angle cone for Mach numbers near 6.0 at stagnation temperatures between 1200 deg R and 2600 deg R. In addition, a similar cone configuration was tested at Mach numbers near 4.5 at stagnation temperatures of approximately 612 deg R. The local Reynolds number based on flow properties at the edge of the boundary layer ranged between 0.1 x 10(exp 4) and 3.5 x 10(exp 4) for tests at temperatures above 1200 deg R and between 6 x 10(exp 4) and 25 x 10(exp 4) for tests at temperatures near 612 deg R. The results indicated, generally, that the recovery factor can be predicted satisfactorily using the square root of the Prandtl number. No conclusion could be made as to the necessity of evaluating the Prandtl number at a reference temperature given by an empirical equation, as opposed to evaluating the Prandtl number at the wall temperature or static temperature of the gas at the cone surface. For the tests at temperatures above 1200 deg R (indicated herein as the tests conducted in the slip-flow region), two definite trends in the recovery data were observed - one of increasing recovery factor with decreasing stagnation pressure, which was associated with slip-flow effects and one of decreasing recovery factor with increasing temperature. The true cause of the latter trend could not be ascertained, but it was shown that this trend was not appreciably altered by the sources of error of the magnitude considered herein. The real-gas equations of state were used to determine accurately the local stream properties at the outer edge of the boundary layer of the cone. Included in the report, therefore, is a general solution for the conical flow of a real gas using the Beattie-Bridgeman equation of state. The largest effect of temperature was seen to be in the terms which were dependent upon the internal energy of the gas. The pressure and hence the pressure drag terms were unaffected.

Pfyl, Frank A.↗

Enhanced thermochemical nonequilibrium computations of flow around the aeroassist flight experiment vehicle

A three-dimensional explicit, finite-rate, shock-capturing numerical algorithm is used to calculate thermochemical nonequilibrium flowfields about the Aeroassist Flight Experiment vehicle at one of its flight trajectory points. The full Navier-Stokes equations and an eleven species chemical model with the latest reaction rates are incorporated into the code. Results are compared against experimental data and other numerical solutions. The effects of changes to the physical model on the stagnation line and base region flow and surface quantities on the forebody are investigated.

Palmer, Grant↗

Geometric Form of Gating System Elements and Its Influence on the Initial Filling Phase

Flow of cast steel through twenty-four variants of gating system was examined with the use of numerical modeling conducted in MAGMA. The main goal of the research was to determine the impact of the gating system elements’ geometric form on the kinetics in the initial filling phase, which is crucial in terms of castings quality. The evaluation was based on flow kinetics, maximal height, and the velocity of metal entering the mold. The variables included the geometric form of the sprue and the cross runner, as well as geometric form, length, and expansion of the ingate. Results allow to form valuable conclusions that can lead to improvement in the castings manufacturing technology. Results show that application of proper expansion of the ingate and suitable geometric form of the gating system can significantly reduce the velocity of metal entering the mold cavity, as well as eradicate the jetting, which positively impacts the soundness of the casting.

36 MATERIALS SCIENCE↗

Two mechanisms for the spontaneous emergence, execution, and reprogramming of chemical logic circuits

A key question in origin-of-life research is how primitive life or life-like systems obtained reusable and reprogrammable machinery of processing information to respond to various environmental and internal stimuli. One strategy to approach this question is to view living systems as universal chemical computers. This approach focuses upon uncovering how reusable and reprogrammable chemical NOT, AND, and OR logic gates could appear under prebiotically possible scenarios where simple chemicals and second- or lower-order reactions are more frequent than macromolecules and higher-order reactions. In this article, we theoretically model two generic mechanisms of forming Boolean gates based on geochemically plausible reaction systems that could have preceded complex biopolymers. The mechanisms exploit simple bistable autocatalytic systems to encode binary variables and use heterogeneous dilution rates to differentially activate or deactivate autocatalysis in different reactors. We found that NOT, AND, and OR gates, as well as more complex logic circuits, can spontaneously arise from connected, well-mixed flow reactors based on (i) catalysis by a heterodimer between mutually inhibitory autocatalysts or (ii) selectively permeable tunnels connecting reactors. Our results suggest that simple machinery can support the prebiotic emergence of complex chemical logic circuits and provide new guides for experimentally actualizing chemical computation.

Zhen Peng↗

Fluorination Enables Simultaneous Improvements of a Dialkoxybenzene-Based Redoxmer for Nonaqueous Redox Flow Batteries

Redoxmers or redox-active organic materials, arc one critical component for nonaqueous redox flow batteries (RFBs), which hold high promise in enabling the time domain of the grid. While tuning redox potentials of redoxmers is a very effective way to enhance energy densities of NRFBs, those improvements often accompany accelerated kinetics of the charged species, undermining stability and cycling performance. In this paper, a strategy for designing redoxmers with simultaneous improvements in redox potential and stability is proposed. Specifically, the redoxmer 1,4-di-tert-butyl-2,5-bis(2,2,2-trifluoroethoxy)benzene (ANL-C46) is developed by incorporating fluorinated substitutions into the dialkoxybenzene-based platform. Compared to the non-fluorinated analogue, ANL-C46 demonstrates not only an increased (similar to 0.41 V) redox potential but also much enhanced stability (1.6 times) and cyclability (4 times) evidenced by electron paramagnetic resonance kinetic study, H-cell and flow cell cycling. In fact, the cycling performance of ANL-C46 is among the best of high potential (>1.0 V vs Ag/Ag + ) redoxmers ever reported. Density functional theory calculations suggest that while the introduced fluorine substitutions elevate the redox potentials, they also help to depress the decomposition reactions of the charged redoxmers, affording excellent stability. The findings represent an interesting strategy for simultaneously improving energy density and stability, which could further prompt the development of high-performance redoxmers.

25 ENERGY STORAGE↗

A Protocol for Electrochemical Evaluations and State of Charge Diagnostics of a Symmetric Organic Redox Flow Battery

Redox flow batteries have been considered as one of the most promising stationary energy storage solutions for improving the reliability of the power grid and deployment of renewable energy technologies. Among the many flow battery chemistries, nonaqueous flow batteries have the potential to achieve high energy density because of the broad voltage windows of nonaqueous electrolytes. However, significant technical hurdles exist currently limiting nonaqueous flow batteries to demonstrate their full potential, such as low redox concentrations, low operating currents, under-explored battery status monitoring, etc. In an attempt to address these limitations, we report a nonaqueous flow battery based on a highly soluble, redox-active organic nitronyl nitroxide radical compound, 2-phenyl-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide (PTIO). This redox materials exhibits an ambipolar electrochemical property with two reversible redox pairs that are moderately separated by a voltage gap of ~1.7 V. Therefore, PTIO can serve as both anolyte and catholyte redox materials to form a symmetric flow battery chemistry, which affords the advantages such as high effective redox concentrations and low irreversible redox material crossover. The PTIO flow battery shows decent electrochemical cyclability under cyclic voltammetry and flow cell conditions; an improved redox concentration of 0.5 M PTIO and operational current density of 20 mA cm-2 were achieved in flow cell tests. Moreover, we show that Fourier transform infrared (FTIR) spectroscopy could measure the PTIO concentrations during the PTIO flow battery cycling and offer reasonably accurate detection of the battery state of charge (SOC) as cross-validated by electron spin resonance measurements. This study suggests FTIR can be used as a reliable online SOC sensor to monitor flow battery status and ensure battery operations stringently in a safe SOC range.

FTIR↗

A multigrid method for the transonic full potential equation discretized with finite elements on an arbitrary body fitted mesh

A multigrid method for the acceleration of transonic potential flow calculations based on a Galerkin finite element approach is described. In order to allow the use of arbitrary body fitted meshes it is necessary to introduce nonuniform interpolation and residual weighting. Emphasis is put on the construction of these operators consistent with the finite element approximation, while standard successive line overrelaxation is used as a smoothing step. Substantial convergence acceleration is obtained and results are presented for different transonic flow configurations including shocks.

Deconinck, H.↗

Detailed Chemical Kinetics Based Simulation of Detonation-Containing Flows

Reliable and robust simulations of detonations in inhomogeneous and turbulent environments are of direct importance in the design of rotating detonation engines (RDEs). In particular, computational models will be especially useful in designing and optimizing discrete injectors that introduce fuel and air separately into the detonation chamber, but ensure appropriate level of mixing to sustain detonations but minimize backflow of detonation products and pressure waves into the feed plenums. Since the structure of detonations itself is non-ideal, models have to include a detailed description of this reacting flow in order to be predictive in nature. Here, a highly-scalable open source based solver has been developed for complex detonating flows such that a) the detonation processes are described using detailed chemical kinetics, b) the method is computationally efficient through the introduction of adaptive mesh refinement, and c) the solver can handle complex geometries of relevance to RDE design. Grid convergence of key metrics for detonations is evaluated using canonical flows. Further, the importance of the use of detailed chemical kinetics is illustrated by extracting the composition structure behind a two-dimensional detonation front. Finally, simulations of a practical RDE configuration are used to demonstrate the applicability of this solver to analyzing geometries. The simulation captures the general trends of the experiment well. It is found that the detonation occurs under partially-premixed conditions. Propagation of pressure waves to the injection system is observed which could influence flow behavior in the oxidizer plenum.

03 NATURAL GAS↗

Blockchain-Based Smart Contracts Use for Photovoltaic Energy Trade Transactions

In recent decades, interest in renewable energy via solar energy has increased, especially in California and Nevada. In a region that can produce enough solar power for self-use, prosumers must use or sell surplus energy. Solar energy self-consumption is essential in modern energy transactions in the grid. This paper proposes an approach towards grid services that includes photovoltaic hardware to store the excess energy in battery storage. Such energy can then be sold to power companies while the transaction is handled using blockchain. Software, security architecture and data flow requirements based on the Ethereum Blockchain are included. Furthermore, this solution protects the private information of seller and buyer and secures transactions.

14 SOLAR ENERGY↗

Temporal Interpolation of Geostationary Satellite Imagery With Optical Flow

Applications of satellite data in areas such as weather tracking and modeling, ecosystem monitoring, wildfire detection, and land-cover change are heavily dependent on the tradeoffs to spatial, spectral, and temporal resolutions of observations. In weather tracking, high-frequency temporal observations are critical and used to improve forecasts, study severe events, and extract atmospheric motion, among others. However, while the current generation of geostationary (GEO) satellites has hemispheric coverage at 10-15-min intervals, higher temporal frequency observations are ideal for studying mesoscale severe weather events. In this work, we present a novel application of deep learning-based optical flow to temporal upsampling of GEO satellite imagery. We apply this technique to 16 bands of the GOES-R/Advanced Baseline Imager mesoscale dataset to temporally enhance full-disk hemispheric snapshots of different spatial resolutions from 10 to 1 min. Experiments show the effectiveness of task-specific optical flow and multiscale blocks for interpolating high-frequency severe weather events relative to bilinear and global optical flow baselines. Finally, we demonstrate strong performance in capturing variability during convective precipitation events.

Image processing↗

Lime slurry treatment of soils developing on abandoned coal mine spoil: Linking contaminant transport from the micrometer to pedon-scale

Historical and abandoned coal mine spoil continues to generate acid- and metal(loid)-rich porewaters and represents a geographically large and diffuse non-point source of contamination to local watersheds. A potentially inexpensive approach to treat these materials and soils developing on them is through the application of lime slurries, to neutralize acidity and encourage the (co)precipitation of metal(loids) with Fe(III)-(oxy)hydroxides, and potentially other metal-oxides and/or Ca-bearing phases. Here, the efficacy of this approach was evaluated through parallel field application and laboratory-based flow-through column experiments. The field site is Huff Run sub-watershed 25 located in Tuscarawas County, Ohio and was chosen in part because it was previously classified as one of the most highly AMD-impacted sub-watersheds in the region. Two locations with historical spoil were chosen and suction lysimeters were installed at 25 and 75 cm depth to monitor porewater composition on two sides at the base of each pile. Half of each slope received seven lime slurry treatments from June through October of 2017. A suite of aqueous (ICP-OES, IC, and TOC-L) and solid phase geochemical and mineralogical approaches (quantitative SEM-EDS and synchrotron μ-XRF) were used to determine how composition, texture, morphology, and spatial distribution of mineral coatings differ in pre- and post-lime treated soils, and how that impacts the distribution and transport of trace metal(loid)s. Mine spoil porewater at site 1 was slightly less alkaline (pH ranging from 7.04 to 7.37) than at site 2 (ranging from 7.55 to 7.71), and average electrical conductivity values at site 1 (316–405 μS cm —1 ) were slightly lower than at site 2 (358–464 μS cm —1 ), although differences between the sites were not significant. Porewater pH and electrical conductivity in all lysimeters decreased over the course of the field season but there was no obvious response to lime treatment at either site or any depth. At site 1, both treatment and depth were significant factors affecting Ca, K, Ni, SO 4 2— , and DOC concentrations while only treatment effects were significant for dissolved Al and Cu (p < 0.05). For all soils, there were no trends in metal concentration observed over time although DOC and SO 4 2— decreased over the field season. Pedon-scale changes in metal porewater concentrations in response to treatment were linked to micrometer-scale changes in mineral surface coatings; specifically, higher concentrations of Ca, Fe, Mn, and Zn were observed in the coatings and no changes were observed in Fe redox speciation, whereas total S decreased likely due to oxidation of S in coal fragments. In contrast to the field experiment, the column experiments exhibited a much greater response in effluent composition with respect to lime treatment. The untreated columns had approximately an order of magnitude more H + leached over the course of the experiment (p < 0.001) and resulted in greater Ca, Al, Cu, and DIC leached and less Mn, Zn, and SO 4 2— . Soils treated with the lime slurry in the column experiments exhibited larger and thicker secondary Fe-coatings, including the addition of Fe-sulfates. Despite clear trends in the laboratory-based column experiment where the lime-to-soil ratio was higher, the effects were either muted or undetected in the field pilot project, suggesting that a higher application rate of lime in the field is needed to achieve a similar effect. This work provides evidence that a less alkaline lime slurry could be a practical and inexpensive method of treating coal mine spoil-impacted soils and represents an important step in linking laboratory-based remediation studies to implemented field-based studies.

58 GEOSCIENCES↗

Influence of fuel properties on internal nozzle flow development in a multi-hole diesel injector

Fuel phys­i­cal prop­er­ties are known to in­flu­ence in-noz­zle flow be­hav­ior, in turn af­fect­ing spray for­ma­tion in in­ter­nal com­bus­tion en­gines. A se­ries of 3D sim­u­la­tions was per­formed to model the in­ter­nal noz­zle flow in a five-hole mini-sac diesel in­jec­tor. The goal of the study was to eval­u­ate the be­hav­ior of two gaso­line-like fu­els (full-range naph­tha and light naph­tha) and com­pare them against n-Do­de­cane, se­lected from a palette used as a diesel sur­ro­gate. Sim­u­la­tions were car­ried out us­ing a multi-phase flow rep­re­sen­ta­tion based on the mix­ture model as­sump­tion with the Vol­ume of Fluid (VOF) method, and in­clud­ing cav­i­ta­tion ef­fects by means of the Ho­mo­ge­neous Re­lax­ation Model (HRM). Val­i­dated method­olo­gies from our pre­vi­ous stud­ies were em­ployed to ac­count for full nee­dle mo­tion. De­tailed sim­u­la­tions re­vealed the in­flu­ence of the fuel prop­er­ties on in­jec­tor per­for­mance, in­jected fuel en­ergy and propen­sity to cav­i­ta­tion. The three fu­els were com­pared with re­spect to global pa­ra­me­ters such as mass flow rate and area con­trac­tion co­ef­fi­cients, and lo­cal pa­ra­me­ters such as pres­sure and ve­loc­ity dis­tri­b­u­tion in­side the sac and ori­fices. Para­met­ric in­ves­ti­ga­tions were also per­formed to un­der­stand the fuel re­sponse to changes in the fuel in­jec­tion tem­per­a­ture, in­jec­tion pres­sure, and geom­e­try de­tails. Cav­i­ta­tion mag­ni­tude was ob­served to be strongly as­so­ci­ated with the val­ues of sat­u­ra­tion pres­sure. Ow­ing to their higher volatil­ity, the two gaso­line-like fu­els were ob­served to cav­i­tate more than n-Do­de­cane across all the in­ves­ti­gated con­di­tions. While at full nee­dle lift cav­i­ta­tion was re­duced for all fu­els, dur­ing the in­jec­tion tran­sients the gaso­line-like fu­els showed more propen­sity to cav­i­tate in­side the ori­fice and seat re­gions. This is ex­pected to have a pro­found in­flu­ence on noz­zle ero­sion. Al­though full-range and light naph­tha have lower den­si­ties com­pared to n-Do­de­cane, ow­ing to their lower vis­cos­ity, the mass flow rate dif­fer­ences be­tween the naph­tha fu­els and n-Do­de­cane were small. In conclusion, the analy­sis of fuel en­ergy con­tent showed that the higher lower heat­ing value (LHV) of light naph­tha helped com­pen­sate for the slightly lower to­tal de­liv­ered mass.

42 ENGINEERING↗

Artificial compressibility methods for numerical solutions of transonic full potential equation

New methods for transonic flow computations based on the full potential equation in conservation form are presented. The idea is to modify slightly the density (due to the artificial viscosity in the supersonic region), and solve the resulting elliptic-like problem iteratively. It is shown that standard discretization techniques (central differencing) as well as some standard iterative procedures (SOR, ADI, and explicit methods) are applicable to the modified transonic mixed-type equation. Calculations of transonic flows around cylinders and airfoils are discussed with special emphasis on the explicit methods that are suitable for vector processing on the STAR 100 computer.

Hafez, M.↗

Highly selective Si 3 N 4 /SiO 2 etching using an NF 3 /N 2 /O 2 /H 2 remote plasma. I. Plasma source and critical fluxes

Highly selective plasma etching of silicon nitride (Si 3 N 4 ), while not etching silicon dioxide (SiO 2 ), is a critical step in the fabrication of microelectronics devices. In many applications, this etching must be damage-free and isotropic, which then motivates the use of remote plasmas where the reactants interacting with the substrate are dominantly neutral species. In this paper and Paper II, mechanisms for highly selective Si 3 N 4 etching in remote plasmas are discussed based on results from experiments and simulations. It has been shown experimentally that high Si 3 N 4 /SiO 2 etch selectivity (≈380) can be achieved in the downstream effluent of an NF 3 /N 2 /O 2 /H 2 plasma. The authors found that H2 plays a principal role in the reaction mechanism as Si 3 N 4 /SiO 2 selectivity shows a sharp maximum as a function of the H2 flow rate. Based on this observation, and measured densities of F-atoms and H2 in the process chamber, a mechanism of selective Si 3 N 4 /SiO 2 etching is proposed in which HF molecules in vibrationally excited states accelerate etching reactions. A reaction mechanism for NF 3 /N 2 /O 2 /H 2 plasmas and its afterglow was developed to computationally determine the species densities and fluxes on the wafer level, validated by comparing with experimentally measured F-atom and H 2 densities. The calculated species densities and fluxes were used as input to an analytical model of Si 3 N 4 and SiO 2 etching based on the results of quantum chemistry simulations. This paper presents experimental results (etching data and species densities), the reaction mechanism for NF 3 /N 2 /O 2 /H 2 plasmas, and the results of simulations of gas phase chemistry. Quantum chemistry simulations of elementary etching reactions, description of the analytical model of Si 3 N 4 and SiO 2 etching, calculations of the etch rates, and Si 3 N 4 and SiO 2 selectivity with this model are presented in Paper II.

42 ENGINEERING↗

Temperature Oscillation in a Loop Heat Pipe with Gravity Assist

ATLAS Laser Thermal Control System (LTCS) thermal vacuum testing where the condenser-radiator was placed in a vertical position, it was found that the loop heat pipe (LHP) reservoir required much more control heater power than the analytical model had predicted. The required control heater power was also higher than the liquid subcooling entering the reservoir using the measured temperatures and the calculated mass flow rate based on steady state LHP operation. This presentation describes the investigation of the LHP behaviors under a gravity assist mode with a very cold radiator sink temperature and a large thermal mass attached to the evaporator. It is concluded that gravity caused the cold liquid to drop from the condenser-radiator to the reservoir, resulting in a rapid decrease of the reservoir temperature. When the reservoir temperature was increasing, a reverse flow occurred in the liquid line, carrying warm liquid to the condenser-radiator. Both events consumed the reservoir control heater power. The fall and rise of the reservoir temperature also caused the net heat input to the evaporator to vary due to the release and storage of the sensible heat of the thermal mass. The combination of these effects led to a persistent reservoir temperature oscillation and a repeated influx of cold liquid from the condenser. This was the root cause of the extraordinary high control heater power requirement in the LTCS TV test. Without gravity assist, such a persistent temperature oscillation will not be present.

000↗

A Highly Soluble Iron–Based Posolyte Species with High Redox Potential for Aqueous Redox Flow Batteries

A novel iron-based posolyte redox species are presented for an aqueous redox flow battery, (Tetrakis(2-pyridylmethyl)ethylenediamine)iron(II) dichloride, which is obtained by a simple synthetic route, shows a high redox potential of 0.788 V versus SHE, and exhibits exceptional aqueous solubility of 1.46 M. Paired with bis(3-trimethylammonio)propyl viologen tetrachloride at neutral pH, the battery demonstrates an open-circuit voltage of 1.19 V and delivers good cycling performance, with a capacity fade rate of 0.28% per day and coulombic efficiency of 99.3%. Postmortem chemical and electrochemical analyses of the posolyte species suggest future routes for stabilization of the complex. Among all the iron complexes with a redox potential above 0.4 V versus SHE, this compound exhibits the highest solubility. Furthermore, these results offer valuable insights that can be applied to the development of future posolyte species for sustainable energy storage solutions.

25 ENERGY STORAGE↗

A NASTRAN-based computer program for structural dynamic analysis of Horizontal Axis Wind Turbines

This paper describes a computer program developed for structural dynamic analysis of horizontal axis wind turbines (HAWT's). It is based on the finite element method through its reliance on NASTRAN for the development of mass, stiffness, and damping matrices of the tower end rotor, which are treated in NASTRAN as separate structures. The tower is modeled in a stationary frame and the rotor in one rotating at a constant angular velocity. The two structures are subsequently joined together (external to NASTRAN) using a time-dependent transformation consistent with the hub configuration. Aerodynamic loads are computed with an established flow model based on strip theory. Aeroelastic effects are included by incorporating the local velocity and twisting deformation of the blade in the load computation. The turbulent nature of the wind, both in space and time, is modeled by adding in stochastic wind increments. The resulting equations of motion are solved in the time domain using the implicit Newmark-Beta integrator. Preliminary comparisons with data from the Boeing/NASA MOD2 HAWT indicate that the code is capable of accurately and efficiently predicting the response of HAWT's driven by turbulent winds.

Lobitz, Don W.↗